In Game Conn Loss

As I am playing Battle for Middle Earth or Battle for Middle Earth 2 online with the router connected and i am not in a game it will randomly loose connection i already contacted EA and they were no help.

I am using the wrt54g and i have gotten the latest firmware if any other questions fell free to ask

Similar Messages

X-FI titanium optical in with game cons

Hi, if i would connect my game console (or sat decoder)?to the "optical in" port of the x-fi titanium card, the card can decode the dolby digital 5. sound or not?

I?know this was addressed already, but I had a few questions. I also bought the X-Fi Titanium Fatalty Pro card with the assumption that it could recieve a Dolby Digital 5. signal through the digital input. When going to purchase a card, it states on the box (and on the website) that the digital input can be used for a "Game Console". As such, I made the assumption that it was able to play Dolby Digital 5. through my analog speakers. (it IS plastered all over the packaging.)? (Note:? the card has the digital in and digital out built into the card itself, not on a seperate module)
Regardless of my misconceptions, I do have a few questions.
.)? Is the X-Fi incapable of recieving a Dolby Digital 5. signal via the digital input?
2.)? If it can recieve one, is it the drivers that would need to be updated, or given the functionality to be able to pass this through to my analog speakers?
3.)? Is this something unreasonable? Can this functionality be hardware implemented or is it completly software?
4.)? Will the X-Fi ever be able to do this? If not, does creative offer a card that has this functionality? (and if not creative, someone else?)
My main reasoning for this is that I built an HTPC and would like to run my xbox 360 through the speakers I have connected to it.
Is there any information about my setup that would be useful, please ask!? I know computer hardware pretty well, but have never jumped into the A/V realm before, so its a little new, but i'm a quick learner!

Problem with my Extreme-gamer cons

Hello,
I just bought my soundcard to play on Battlfield 242. And saw the web page "http://www.soundblaster.com/products/gaming/article.asp?articleID=6848&categoryID=3" on how I could make my gaming richer.
And I realise that my Creative Extreme-Gamer Console doesn't have a option called "Sychronize with control panel" in gaming mode.
Any ideas? Really need help.
Thanks
Message Edited by thechosenx on 04-23-2008 06:6 PM

Ah yes, I don't have that option on my computer! The one you in red. What version are you using? And are you using Windows XP?Message Edited by thechosenx on 04-23-2008 :2 PM

SQLException: how do I know where I went wrong?

I just revolutioned the database I was using for my tomcat application, switching from MyIsam to InnoDB.
But as soon as I tried an insert I got an SQLException.
this is part of the code (which is called from a servlet):
    public void saveInitialize(String gameName) throws ClassNotFoundException, SQLException {
        Connection con = null;
     Statement stmt = null;
     PreparedStatement pstmt = null;
     ResultSet rs = null;
     try {
         con = DBConnect.connect("GAMES");
         con.setAutoCommit(false);
         stmt = con.createStatement();
         int IDGioco = 1;
         rs = stmt.executeQuery("SELECT ID FROM GAMES ");
         while (rs.next()) {
          IDGioco = rs.getInt("ID") + 1;
         rs.close();
         stmt.executeUpdate("INSERT INTO GAMES VALUES (" + IDGioco + ", '" + gameName + "', " + numeroPeriodi + ", " + numeroAziende + ", " + numeroProdotti + ", " + periodiGiocati + ")");
         for (int i = 1; i <= numeroAziende; i++) {
             stmt.executeUpdate("INSERT INTO AZIENDE " +
              "VALUES (" + i + ", '" + nomeAzienda[i] + "', ENCODE('" + passwordAzienda[i] + "','tbg'), " + IDGioco + ", " + periodiInseriti[i] + ")");
         for (int j = 1; j <= numeroProdotti; j++) {
             stmt.executeUpdate("INSERT INTO PRODOTTI " +
              "VALUES (" + j + ", '" + nomeProdotto[j] + "', " + IDGioco + ")");
         pstmt = con.prepareStatement("INSERT INTO P_UNITA VALUES ( ?, ?, ?, ?)");
         pstmt.setInt(1, parametroUnitaPrezzo);
         pstmt.setInt(2, parametroUnitaInvestimenti);
         pstmt.setInt(3, parametroUnitaPezzi);
         pstmt.setInt(4, IDGioco);
         pstmt.executeUpdate();
         pstmt.close();
         pstmt = con.prepareStatement("INSERT INTO P_DEFAULT_PRODOTTO VALUES ( ?, ?, ?, ?, ?, ?, ?, ?)");
         for (int j = 1; j <= numeroProdotti; j++) {
             pstmt.setInt(1, parametroDefaultPrezzo[j]);
             pstmt.setInt(2, parametroDefaultPromozione[j]);
             pstmt.setInt(3, parametroDefaultPubblicita[j]);
             pstmt.setInt(4, parametroDefaultPrevisioneDiVendita[j]);
             pstmt.setInt(5, parametroDefaultDesign[j]);
             pstmt.setInt(6, parametroDefaultTecnologia[j]);
             pstmt.setInt(7, IDGioco);
             pstmt.setInt(8, j);
          pstmt.addBatch();
         pstmt.executeBatch();
         pstmt.close();
/// etc. etc. etc.this is the error message I get:
java.sql.SQLException: Syntax error or access violation: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near '800. 600. 1)' at line 1 at com.mysql.jdbc.MysqlIO.sendCommand(Unknown Source) at com.mysql.jdbc.MysqlIO.sqlQueryDirect(Unknown Source) at com.mysql.jdbc.Connection.execSQL(Unknown Source) at com.mysql.jdbc.PreparedStatement.executeUpdate(Unknown Source) at com.mysql.jdbc.PreparedStatement.executeUpdate(Unknown Source) at Game.saveInitialize(Game.java:7759) at SingletonGame.syncInitialize(SingletonGame.java:71) at SaveNewGame.doPost(SaveNewGame.java:316) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247) at
etc. etc. etc.
how do I know where I went wrong (the insert code is about 1200 lines)?
thank you
alessandro

While not related to your problem, I did notice that you're inserting into columns without specifying the column names, ie.
         stmt.executeUpdate("INSERT INTO GAMES VALUES (" + IDGioco + ", '" + gameName + "', " + numeroPeriodi + ", " + numeroAziende + ", " + numeroProdotti + ", " + periodiGiocati + ")");While technically it's not an error, it's really easy to introduce a bug into your code. There's no guarantee that the order of columns will always be the same as when you created the table. It's much better to do something like "insert into games (col1,col2,col3...) values(...)".

Nullpointerexception to a jtable

Hi, I have been struggling with this for hours, and I can't seem to figure out why this won't work. It compiles fine, but I get a run-time error that reads:
E:\Math\Chuck-a-Luck>java Chuck
Exception in thread "main" java.lang.NullPointerException
at java.awt.Container.addImpl(Container.java:625)
at java.awt.Container.add(Container.java:307)
at Chuck.initComponents(chuck.java:185)
at Chuck.<init>(chuck.java:36)
at Chuck.main(chuck.java:47)
I have this at the beginning of class Chuck:
private static JTable record;
private static RecordTableModel recordModel;
(RecordTableModel is an inner class)
The constructor is:
     public Chuck(String title) {
          super(title);
          try {
               UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
          } catch (Exception e) {
          createComponents();
          initComponents();
          recordModel = new RecordTableModel();
          record = new JTable(recordModel);
     }createComponents() and initComponents() just assign all the variables declared at the beginning of the class. i put it in separate methods for neatness. However, the lines
recordModel = new RecordTableModel();
and
record = new JTable(recordModel);
aren't in those methods because those methods are static, and the compiler didn't like that.
the inner class, RecordTableModel, is this:
     public class RecordTableModel extends AbstractTableModel {
          final String[] columnNames = {"Games Played", "Losses", "Wins (1 match)", "Wins (2 matches)", "Wins (3 matches)"};
          final Object[][] data     =     {
                          {new Integer(games), new Integer(losses), new Integer(wins1), new Integer(wins2), new Integer(wins3)}
          public int getColumnCount() {
                  return columnNames.length;
          public int getRowCount() {
               return data.length;
          public String getColumnName(int col) {
               return columnNames[col];
          public Object getValueAt(int row, int col) {
               return data[row][col];
          public void setValueAt(Object value, int row, int col) {
               if (data[0][col] instanceof Integer && !(value instanceof Integer)) {
                    try {
                         data[row][col] = new Integer(value.toString());
                         fireTableCellUpdated(row, col);
                    } catch (NumberFormatException e) {
                         JOptionPane.showMessageDialog(Chuck.this, "The \"" + getColumnName(col) + "\" column accepts only integer values.");
               } else {
                    data[row][col] = value;
                    fireTableCellUpdated(row, col);
     }Finally, the part that is giving me the error is when i try to add the jtable to a jpanel (the compiler said it's this line):
JPanel blank = new JPanel();
blank.add(record); // this line is where the error is
c.fill = GridBagConstraints.BOTH;
subbag.setConstraints(blank, c);
play.add(blank); // play is another jpanel
I don't know why it would be a null pointer when I try to add the jtable, it has clearly been declared and initiated. I appreciate any help you can give me. Thanks!
Tom

This trace...
Exception in thread "main" java.lang.NullPointerException
at java.awt.Container.addImpl(Container.java:625)
at java.awt.Container.add(Container.java:307)
at Chuck.initComponents(chuck.java:185)
at Chuck.<init>(chuck.java:36)
at Chuck.main(chuck.java:47)
Shows that inside of initComponents, you are calling add. I assume this is that code.
JPanel blank = new JPanel();
blank.add(record); // this line is where the error is
c.fill = GridBagConstraints.BOTH;
subbag.setConstraints(blank, c);
play.add(blank); // play is another jpanel
Since I can see that blank isn't null, maybe record is???

Use same nvidia-settings config in other X server.

I have been using Linux for a while and I have been playing all the games that can't be minimized on a separate X server, so I can use the desktop while playing. I use this script now: https://wiki.archlinux.org/index.php/Ru … _X_display
But I have noticed that the nvidia-settings (antialiasing and all that) have no effect on the new X. I have tried adding nvidia-settings --load-settings-only to the game script (I launch the games with ./xinit script, and script contains "nvidia-settings --load-settings-only" and a call to the game), but it doesn't seems to work either.
I notice it because antialising/anisotropic filters aren't applied and there are some glitches on textures. If I run the game con the current X server, those filters are applied and textures are fine.
Anyone know what can I do to load the same configuration when running on another X server?
I'm using all latest software and Nvidia GT440.
Thanks
Last edited by The Loko (2014-09-17 21:23:21)

I have been testing with nvidia-settings -q all, running it in another X server and redirecting the output to a file.
Then I diff'ed it with the result of running it on the desktop and the output was the same, so the config is loaded, but 1 line:
Other X: Attribute 'GPUUtilization' (julio-linux:10[gpu:0]): graphics=31, memory=24, video=0, PCIe=1
Desktop: Attribute 'GPUUtilization' (julio-linux:0[gpu:0]): graphics=0, memory=1, video=0, PCIe=0
While GPUUtilization attribute on desktop is always the same, when running another X server, this attribute on that X changes, those variables change randomly, I suspect about PCIe parameter. It looks for another GPU?? (I only have one).
Sometimes the PCIe parameter is the same, but not the others.
I have tried running another desktop too, (I use xfce) loading the xinitrc file with startx ~/.xinitrc --: 10, and run the game from there. The antialiasing/anisotropic filters were applied there, the game looked good.
I checked there the configuration and the GPUUtilization attribute was the same of main X server/desktop, It doesn't change when loading another desktop with .xinitrc.
So I think that the problem is when not loading a desktop, the attribute 'GPUUtilization' changes and this is what makes the driver not apply the settings there.
How can I fix that?
Last edited by The Loko (2014-09-19 21:47:43)

Multiplayer abilities level-up: community help

Hello to the KZ community. As my title states, the abilities level-up can take a ridiculous amount of time, especially with the 400 air or buddy drone kills. If you people have tips or if some of you want to work towards getting these abilities leveled up to the max, please post below.I suggest to create a warzone with low life and just play normally. More ideas are very welcome! Thanks a lot and keep fragging!

It is learning with experience game. No matter how much you play with bots it is going to be difficult playing against human opponents. Because every game , every loss, every kill you learn, you learn where you get flanked from, you learn the map , you learn different styles, you scan your enemy, you know when to be agressive, you know when to be defensive, you know when to use which abilities, you understand when not to get killed, you understand when it is time to get purposefully killed, you understand when to go infront of 7 players just becauses that 2 seconds of capturing mission or bomb is going to make that difference. And at the end you learn and become a great player. That is the phase that everybody got through , nowhatever which game you play you will start as a noob.So stop worrying about KD and just enjoy the experience.

845PE Max 3 problems - well documented

Ok here goes....
MSI 845PE Max3 mboard
Intel P4 2.4Ghz 800FSB
512mb 3200 memory
300w AMD / Intel approved PSU
Asus Ti4600 Geoforce 4
IBM 80gb HDD
Clean install of windows
all drivers etc install successfully
no IRQ conflicts that are obvious
THEN......
-random crashes, lockups, blue screens etc particularly in games
-random loss of sound in games about 5-10 minutes in
Botth these problems many people seem to have had looking on a forum search here. The only factor that is consistent is everyone with the problem had a 300W PSU which many advisers have suspected to be too low. Can anyone definitively confirm this before I buy a 400W PSU replacement? What is the likelehood it's something else?

I don't know if this will help anyone but here goes.
my system is as follows: antec case and 350w power supply.
msi 845pe max3.
pentium4 2.6g 800 fsb.
2x256mb corsair xms 3200 memory.
geforce 3ti 200.
xp home.
I have been suffering with random crashes since i built this system,about 2 months ago.I tried re-seating cpu (fresh thermal paste),swopping memory (1 stick,2 sticks),different graphics cards ( geforce4 mx 440, radeon 9500 pro),different sound card (sound blaster 5.1, on board sound,no sound!).
None of which made any difference!
I tried "throttling "back the cpu to 533.
But i recentlygot hold of a programme called BURNIN TEST PRO VER2.3,And ran the tests,Everything worked great until i tried the 2D test,No matter what i did it wouldn't run this test,I thought it might be the graphics driver and updated to 45.23 NVIDIA DRIVER, But still no luck.So i disabled HYPERTHREADING in the BIOS,And the test ran fine.
Since then i haven't had any random crashes (approx 2 weeks),Obviously only time will tell,but if your having similar problems to me it's worth a try!
p.s. I am not qualified in anyway in computers,and there might be a logical reason why the 2D TEST didn't run,And if anyone has a different input i would appreciate it. davidblack

Terrible Packet Loss in Game- Please help!

Computing statistics for 100 seconds...
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 Sam-PC.home [192.168.1.5]
0/ 25 = 0% |
1 2ms 0/ 25 = 0% 0/ 25 = 0% Wireless_Broadband_Router.home [192.168.1.1]
1/ 25 = 4% |
2 13ms 1/ 25 = 4% 0/ 25 = 0% L100.WASHDC-VFTTP-126.verizon-gni.net [173.66.228.1]
0/ 25 = 0% |
3 11ms 1/ 25 = 4% 0/ 25 = 0% G1-5-0-4.WASHDC-LCR-21.verizon-gni.net [130.81.213.68]
0/ 25 = 0% |
4 20ms 1/ 25 = 4% 0/ 25 = 0% so-12-1-0-0.RES-BB-RTR1.verizon-gni.net [130.81.151.230]
0/ 25 = 0% |
5 12ms 1/ 25 = 4% 0/ 25 = 0% 0.xe-8-0-0.BR2.IAD8.ALTER.NET [152.63.38.129]
0/ 25 = 0% |
6 34ms 1/ 25 = 4% 0/ 25 = 0% ae17.edge1.washingtondc12.level3.net [4.68.62.137]
0/ 25 = 0% |
7 33ms 2/ 25 = 8% 1/ 25 = 4% vl-3503-ve-117.ebr1.Washington12.Level3.net [4.69.158.26]
0/ 25 = 0% |
8 29ms 3/ 25 = 12% 2/ 25 = 8% ae-6-6.ebr1.Atlanta2.Level3.net [4.69.148.105]
0/ 25 = 0% |
9 30ms 2/ 25 = 8% 1/ 25 = 4% ae-63-63.ebr3.Atlanta2.Level3.net [4.69.148.241]
0/ 25 = 0% |
10 50ms 1/ 25 = 4% 0/ 25 = 0% ae-7-7.ebr3.Dallas1.Level3.net [4.69.134.21]
1/ 25 = 4% |
11 56ms 2/ 25 = 8% 0/ 25 = 0% ae-63-63.csw1.Dallas1.Level3.net [4.69.151.133]
0/ 25 = 0% |
12 54ms 2/ 25 = 8% 0/ 25 = 0% ae-1-60.edge2.Dallas1.Level3.net [4.69.145.11]
0/ 25 = 0% |
13 54ms 2/ 25 = 8% 0/ 25 = 0% 4.59.197.34
1/ 25 = 4% |
14 50ms 3/ 25 = 12% 0/ 25 = 0% 64.25.32.9
0/ 25 = 0% |
15 --- 25/ 25 =100% 22/ 25 = 88% 64.25.32.26
0/ 25 = 0% |
16 48ms 3/ 25 = 12% 0/ 25 = 0% 64.25.39.1
These are the results of a test I ran, but I don't know how to solve the problem. The game is unplayable because of the amount of packet loss. I know it is an issue of connection between the game and my router, so should I get a new router if mine is old?

The router I would imagine to be okay for the first bit, but for the sake of things, reboot the router and also try giving your ONT a reboot by unplugging it from AC power and then disconnecting the battery. Re-connect it after 30 seconds by connecting the battery and then plugging it back into AC power.
Also, see if the packet loss takes place during specific times of the day. If your router has a WAN connection over Coax (rather than an Ethernet connection) to your ONT, also consider checking your MoCa speeds based on this FAQ. Poor MoCa speeds can suggest shoddy coaxial causing some issues, too: https://secure.dslreports.com/faq/verizonfios/3.2_MOCA#16569
========
The first to bring me 1Gbps Fiber for $30/m wins!

I wanted to delete a app so I could redownload to restore and start game over and so I deleted it then went to re down load and it says it's still installed so I can't re download but the I con is not any where on my iPad where can I find it?

Where do I find a I con that is gone but on the app store it says it's installed when I deleted the app to restore game and now I can't install the game because it says it already is but I deleted it and Icon doesn't show any where on my screen?

Check here:
Settings>General>Usage>Show all Apps (you'll likely need to scroll down)
Find the app you wish to delete, tap on it, then tap "Delete App"

100% packet loss and I can't play Online games

Recently I just got cable installed and the Internet works and it connects to my Xbox one but I have 100% packet loss and I can't play any online games or apps on my phone. Can someone please help me out as I have waited about 2 weeks to get it working!

hi AireVuqe101
I'm referring your post to our Social Media Tech Team for some further assistance.
You may not receive any contact from them until Monday, so if you need further assistance in the meanwhile, we do have a 24 hour Technical Support team who can be contacted by either calling 133933 or via Live Chat http://tel.st/gq6m
Regards

Packet Loss Causing Game Lag

For the past few days I've been experiencing severe lag while playing an online game. The ping is normal, but the game stops responding or its response is delayed to such an extent that it's impossible to continue playing. My friend attributed the problem to the packet loss that Verizon customers have been experiencing. I'm curious as to when this issue will be resolved, as it's extremely annoying and has prompted me to consider switching to a different internet service provider.

Step one: Visit http://www.giganews.com/line_info.html and post up the Traceroute the page shows, if you wish. Be aware that your non-bogan public IP Address will show up. It might shown up as the final hop (bottom-most line of the trace) might contain a hop with your IP address in it. Either remove that line or show only the first two octets. What I'm looking for is a line that mentions "ERX" in it's name towards the end. If for some reason the trace does not complete (two lines full of Stars), keep the trace route intact.
For example this what I saw when I was using Verizon
news.giganews.com
    traceroute to 71.242.*.* (71.242.*.*), 30 hops max, 60 byte packets
    1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 13 ms 13 ms 13 ms
    2 ash-bb1-link.telia.net (213.248.70.241) 39 ms 7 ms 7 ms
    3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 4 ms 4 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 4 ms
    4 so-7-1-0-0.PHIL-CORE-RTR1.verizon-gni.net (130.81.20.137) 6 ms 6 ms 6 ms
    5 P3-0-0.PHIL-DSL-RTR11.verizon-gni.net (130.81.13.170) 6 ms 6 ms 6 ms
    6 static-71-242-*-*.phlapa.east.verizon.net (71.242.*.*) 32 ms 32 ms 33 ms
Step two: Can you provide the Transceiver Statistics from your modem?
#3 If you don't know how to get that info:
a) What is the brand and model of your modem?
b) If you have a RJ-45 WAN port router connected to it: What is the brand and model of the RJ-45 WAN port router?
#4 If you have a RJ-45 WAN port router connected to the modem, even if you know how to get the Transceiver Statistics from the modem: What is the brand and model of the RJ-45 WAN port router?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Salve ho un iphone 5c con aggiornamento avete risolto molti bug ma non avete riaolto quello su game center perche' su game center quando entro spesso mi crasha il telefono per favore risolvete questo bug buon lavoro

salve ho un iphone 5c ho problemi con game center ho provato varie volte a fare il ripristino come nuovo

salve ho un iphone 5c ho problemi con game center ho provato varie volte a fare il ripristino come nuovo
iPhone 5c, iOS 7.1
I have this question too (0) Reply Categories: Apps Tags: none (add)

HT201269 I have 2 iPads and every time I download a game it also downloads onto the other iPad as well how con I stop this

My wife and I have an iPad each and every time I download a game it also goes onto hers,how can I stop this from happening

Settings-store-turn off automatic downloads.

Loss of sound in games apps

First let me say that I am an Apple/iPad newbie.
Without making any settings changes, all of a sudden I have lost all sound in my games apps. At first it was just partial sound that was lost, but now it's everything.
Read through some other discussions re: this issue, and checked the switch next to the volume button. Shows that sound is not muted.
I have a 4th gen iPad with iOS 6.1.3. This machine is only 2 months old so I am a bit disappointed since I was glad to be off Windows and its quirks. Please tell me there is an easy fix.
Thanks.

This may come in handy.
iPad Manual
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

In Game Conn Loss

Similar Messages

Maybe you are looking for