In idoc to idoc scenario what settings are must in target system

Hi all,
I need to transfer idoc from r/3 4.5 B to SNC system using XI idoc adapter.
What settings are must in target SNC(Suppy Network Collaboration) system for reiceiving IDOC in XML format.

Solved

Similar Messages

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
Does it play in your Mac?
What brand of disks are you using?
Russ

What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishna

Hi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

When dragging photos to desktop, what settings are used?

When a photo is dragged out of iPhoto and dropped anywhere in the Finder, what settings are used for that implicit export? E.g., what JPEG quality? It seems to export the full size.
Can't seem to find this documented anywhere!

In tests Old Toad reckoned that it was equivalent to about 8 on Photoshop's scale of 12.
Typically when I export via the file menu I select the highest quality. If iPhoto uses something less than that, then I'll stop dragging and return to the file menu export.
Doesn't quite work like that.
If you have an edited photo then there is a single generation of compression applied. If you export at any setting other than Maximum the file will be smaller. At maximum the file will quite likely be larger - less compression applied to the data.
As to which is best to use? Depends on what you're using this jpeg for - but remember this, exporting via dragging gets none of the metadata you've added in iPhoto (Keywords, Location, titles, descriptions etc)
Regards
TD

What settings are used to convert to pdf?

what settings are used to convert to pdf?

Hi geoffc39307434,
Are you asking what settings Adobe PDF Pack uses when you create a PDF file, or what settings you should choose in Acrobat when you create a PDF?
Best,
Sara

What documents are posted in FI systems from MM/EBP

hi friends
If we are using Taxware for tax calculation then do we need to use FI also as backend. What is the use of FI in backend and what documents are posted in FI system
Regards
vinny

Hi
Irrespective of the technical scenario you are using, you should have a back end to handle your accounting documents. As SRM system does not support accounting, all the accounting documents will be posted to the back end. It need not be SAP R/3, you can have any other accounting package for this.
Thanks
Sri.

Can I upgrade the processor on my laptop? If so, what processors are compatible for my system?

I have an HP Pavillion dv6-2150us, which runs an Intel Core i3 @ 2.13 GHz, 8 GB RAM and Windows 7 Ultimate 64-bit. Can I upgrade this processor and if so, what processors are compatible to this system?

First think about memory and an SSD drive. Laptop processor upgrades are a big hassle and not cheap.

IDOC to File scenario Configuraton settings

hi,
   I am doing IDOC to FILE scenario.I am sending IDOC from R/3 to XI and then to XML file.That mean smy scenario is as Follows ( R/3XIfile ) These are my queries
-->I have created RFC Destination from R/3 to XI.should I need to create RFC destination from XI to R/3 ( i mean In XI )??
-->I have created one Port in R/3 and I have linked that port with RFC Destination that i have created.here i am sending IDOC from R?# to XI...SO we call this PORT as SENDER PORT or RECEIVER PORT??
-->and DO we need to create PORT in XI also??is it require for my scenario??
-->DO we need to create Partner Profiles in XI also??
-->DO we need to create LOgical system in XI to represent the XI system?? (as we created LS in R/3 to represent sender system)
--->Here is my big doubt..
               when we test IDOC ..by sing we19 TCODE,
   We need to fill the corresponding details as below,
Receipent                                  Sender
Port                                              Port
PartnerNo                                      PartnerNo
PartnerType                                   PartnerType
my Doubt is,
-->>In which field we need to specify the Port that we have created in R/3..Receipent side OR Sender Side..?? and Why??
-->>Same for ParnerNo..where we need to specify the Logical system which we have created in R/3 should specify??Why??
Please give reply ASAP..with detailedexplanation..
points will be rewarded..
regards,
murali

HI
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You donu2019t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You donu2019t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD u2013 System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system names
cheers
reward poins if found useful

What settings are required for Milestone Billing ?

Please explain in detail what all settings are required in order to do milestone billing ?
Regards,
Gobind.

Hi
Milestone Billing.
1. Create New Sales Order Type, say ZOR (Copy of OR) through T.Code: VOV8
Maintain Delivery Type as LF & Billing Type As 'F1' - Order Related / 'F2' Delivery Related.
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Header > Define Sales Documents Types
2. Assign New Sales Document Type to Sales Area, For Eg:
1000 (S.Org) / 10 (D.Channel) / 10 (Division) / ZOR (S.O Type)
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Header > Assign Sales Area to Sales Document Type
3. Create New Item Category, say ZTAN - Copy of TAN (For delivery Related) / ZTAD - Copy of TAD (For Order realted) / ZTAS - copy of TAS (For Third Party)
Maintain as under (others remaining same)
Billing Relevance: I
Billing Plan Type: 01
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Item > Define Item Category
4. Assign Item Category, for ex (assuming Usage & higher level item category as blank):
Sales Document Type | Item Category Group | Default Item Category
ZOR | NORM | ZTAN
ZOR | DEIN | ZTAD
ZOR | BANS | ZTAS
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Item > Assign Item Category
Note: In the above Billing Type '01' plays the main controller for milestone billing. In Sales order, at item level, we require to maintain the billing plan.
Follow the Sales cycle as normal sales cycle for particular Scenarios
Also Refer:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/milestone+billing.

What settings are reqd. for consuming a webservice in 6.2 - Other questions

Hi,
I have been following the below mentioned blog to create a program to consume a webservice.I am currently on Enterprise version(4.7), release 6.2.
I get a communication_failure(sy-subrc = 1) when using "METHOD http_client->receive".Please let me know if you have any solutions.(The code of the program is in the blog..link mentioned below)
Could the group provide solutions to the following in relation to blog mentioned below:
Webservice consuming using ABAP in 6.2
/people/durairaj.athavanraja/blog/2004/09/20/consuming-web-service-from-abap
- What Proxy settings are required to be performed,
where can we perform the same
- What is the information required to fill the user id
and passwords for ? - Are the credentials for the
webservice we are calling or for the proxy
(correct me if i am wrong)
- How can we fill the fields Proxy and port, how do they
play a role.
Thank you

Hi,
As reply to his blog DuraiRaj Athavan Raja has provided the following information.Thank you Raja.
http_client->receive - Communication failure obtained
2006-07-18 22:29:04 Durairaj Athavan Raja [Reply]
do you connect to internet via proxy? if yes you have to either code proxy authentication or simply maintain it in transaction SICF.
go to
SICF->client->proxy settings
go to http_log tab
host name: proxyhost.domain.com
port: <portno>
user - > proxy user id
pwd -> proxy pwd and save it .
and this setting is per client , so you have to do that for all clients.
Regards
Raja
I am working on getting the proxy settings completed and will update the post when i am through with all the findings.

What settings are needed to get iPhone to show in iTunes on Win 7

have a new iPhone 4S
Have d/loaded latest iTunes to my pc (Windows 7 Pro)
When I plug phone into pc iTunes does not automatically open (have checked Auto Play settings and there is no listing of the iPhone or iTunes)
so I open iTunes manually however am unable to get the phone to show up in the L.H.column.
Clearly the settings are not allowing this but I have no idea whatsoever about how to proceed as there is no indication of what is required.
Any suggestion?

Yes Ralph, of course tried several outlets (all working with other electrical appliances).
And yes, I did contact Apple ... I went through the long and nuisance process of actually getting to them ...
all the while chewing up my credit at a rate of knots and finally when I got someone and had once again (for pete's sake how often must we identify ourselves in one call?) given my particulars I was then told my credit card was needed before Apple would sent another plug.
1. Apple ought to know that one does not give out credit card details over such an insecure medium as mobile phone
2. the idea that I have to pay for a replacement plug after just forking out a bomb for a brand new iPhone 4S left me flabbergasted. I stopped the call and I think I felt a decision to never purchase another apple product.
I do hope someone from the Apple company reads these posts .... if so please convery to whoever that I am disgusted over the treatment I've recieved after this purchase. It was a big deal for me and there has been absolute zero joy in the aquisition.

What to do if the target system is down for async scenario

Hi All,
What all recovery options we have in XI if the target system is down for very long time
in async scenario ??
-> Can we configure any alerts which will send mails with the failed message details if the
   target system is dowm for very long time.
   If this is possible, will there be any links in that mail which will allow the
   alert mail receiver to 'resend' the failed message once the target system is up ?
We are on nw2004s SP9.
Can anyone help.
Thanks in Advance
Regards,
Chemmanz

Can we configure any alerts which will send mails with the failed message details if the target system is dowm for very long time.
Yes we can send Alters from XI . let clarify one thing here alters are triggred immedaitely when their any failure in Adapter or mapping or etc then immdeaitely it is sendt so theirt is no such things for this "details if the target system is dowm for very long time". it does not differencate it long or short.
If this is possible, will there be/can we configure any links in that mail which will allow the alert mail receiver to 'resend' the failed message once the target system is up ?
chekc the blog for alter step by step from Michal
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
you can confiure alters to send your outlook also then if he replis you get a reply.
Regards
Sreeram.G.Reddy

What Settings Are Best?

I shoot HD 1080i60
I export from fcp into HDV-1080i60
I want to burn this final HD1080i60.mov onto a dvd and have it look as close to HD as possible.
I understand that HD DVDs wont play in most dvd players, so I know I have to set DSP to SD-DVD settings.
What is the best I guess compressor settings to get what I am asking for?
Im just want to move beyond IDVD

Welcome to the Boards
There are a few ways to approach things along the whole process as [discussed in these thread|http://discussions.apple.com/search.jspa?objID=c123&search=Go&q=HDtoSD]
Usually, in general, exporting to an uncompressed format (Pro Res) then using Compressor with settings for SD DVD, frame controls set to Better for resizing based on bit rates as [described here|http://dvdstepbystep.com/faqs_7.php] and subject to the issues [described here|http://dvdstepbystep.com/faqs_3.php].
Some of it will be a bit of trial and error depedning on the footage, but that should get you going.

What settings are best to export sharpened images from Photoshop to use in Final Cut?

I need to give a professional photographer the correct dimensions to export her images from Photoshop for me to use in Final Cut. I told her:
1080 x 1920, 300 dpi, and also to Convert Images to Apple RGB (Final Cut doesnt work well with Adobe RGB, I am told). Her images have alot of heavy sharpening on them--she is an artist--and when i import them into Final Cut, many of the lines that should be crisp are zig-zagged, and if I apply motion to them, they "shake."
My problem is specific to images that have been highly sharpened in Photoshop; i have imported lots of professional images before with no problem. I am on deadline and hope someone out there will see this.

You were right about trashing the finalcut plist. As well as a very specific set of directions I now have put together from what you and others have said elsewhere, and this is it, i hope it helps others with their Canon XHA1 and Final Cut Express HD:
Trash the final cut preferences (plist) in your Home - LIbrary.
go into the Canon XHA1 menu, make sure that you're not set to down-convert to DV.
Get out of the menu. Shut the camera off,
plug in the firewire cable to both the camera and computer,
and turn the camera back to VCR mode.
Open up Final Cut, and go to Easy Setup ,
choose HDV- Apple Intermediate Codec 1080i60
This worked beautifully but took me nearly four hours to figure out, including researching the web and experimenting in FCE HD

What settings are needed for Flip 4 Mac to change frame size?

I just installed Flip 4 Mac Studio Pro so that I can make wmv files in different sizes. It works in 340x240 and 480x360, but freezes up when I choose the preset 384x288. Are there other settings that need to be changed to make this work. I thought this version of Flip would allow me to do most anything.
I'm exporting a short 4 min sequence from FCP using Quicktime conversion.

This will give you the instructions on how to set it up step by step.
http://community.virginmedia.com/t5/Email/Setting-up-access-to-Virgin-Media-NTLW ORLD-email-on-iPhone-or/td-p/883445

In idoc to idoc scenario what settings are must in target system

Similar Messages

Maybe you are looking for