In make to order cycle semifinished costs are not appearing in itemisation

Hi
We are facing a problem in Make to order. When a production order is created with respect to a sales order, semifinished costs are not appearing in Itemisation or cost component structure of Production order.
In other cases like make to stock and planning with final assembly costs are appearing. we are checking costs at CO02 - goto menu- costs - itemization.
Please provide us solution for this problem.
Thanks and regards,
Deepa

Hi
Please check 'Cost component Structure' Attribute details data for the semifinished component.
In that chek for 'Rollup cost' and also check for 'Filter Criteria for cost component views on Itemization' properly.
Regards
Laxmiprasad
Apart from above pls check for semifinished product in material master in costing1 view for material origin check box, check it if not selected.
Regards
Laxmiprasad
Edited by: Laxmiprasad Pagidala on Jan 22, 2008 2:03 PM

Similar Messages

HALB costs are not shown in Itemisation for Make to order

Hi
We are facing a problem in Make to order. When a production order is created with respect a sales order, semifinished costs are not appearing in Itemisation or cost component structure of Production order.
In other cases like make to stock and planning with final assemble costs are appearing.
Please provide us solution for this problem.
Thanks and regards,
Deepa

Hi,
Please check with Costing relevancy ind for Semei material at "General data Tab" in component over view of Production order (co02)
Do u mean to say for same sale order material Number , semi material cost will not be added forPG20 and is added for PG 10 at Prod order.Please confirm
Regads
Pradeep

Target costs are not appearing in Production order

Dear friends,
I have created cost estimate for a material on 22.08.2010. I have posted so many back log entries from 1st aug to 22nd aug i.e creation of production orders and goods issues to the production orders and and goods receipts from the production orders. Now I am not able to see the target costs in the production order even after running the variance calculation. Plz help me how to get the target values in the production order.

Hi
1. Have you released the cost estimate from CK24 before GR from prod order? Check if field Current price in Costing 2 view is not Zero
2. If your contr area currency is different than comp code currency, then your costing variant should allow you to release the cost in contr area currency as well.. T code OKKN ("assignments" tab)
3. Check if target cost version 0 is defined properly and assigned to your contr area
4. check if variance key is there in your prod order.. you can assign default var key to plant in OKVW
Regards
Ajay M

Make to Order cycle

Dear Experts,
     I want to do MAKE TO ORDER for production (Discrete). So can you please give me the complete cycle for MTO from SD, MM, PP & FICO involment in the cycle.
Thanks & Regards,
venkat.

Hi,
Please find below Make to Order Cycle.
1. Creation of Sales Order - VA01
2. MRP against Sales ORder - MD50
3. Convert the planned order into Production / Process ORder
4. Preliminary Cost Estimate for ORder
5. Release the Order
6. Conversion of Purchase requisition into Purchase Order
7. Creation of Purchase Order - ME21N
8. Goods Receipt against Purchase ORder - MIGO
   Accounting Entry: Rawmaterial A/c dr
                       To Goods Receipt/IR
9. Confirmatin of ORder - COR6N
10. Order Report - KKBC_ORD
11. Goods Receipt for Order - MB31
    Accounting Entry: Finished Goods a/c dr
                         To Production Order
12. Order Report KKBC_ORD
13. Stock Overview Report - MMBE
14. Outbound Delivery PGI - VLO1N
    Accounting Entry: Finished Goods COS a/c dr
                        To Finished Goods
15. Billing - VF01
    Accounting Entry: Customer A/c dr
                        To Sales Revenue
Period End Activities
16. Overhead Calculation - KGI2
17. When Order Technically completed:
    Variance Calculation for ORder - KKS2
18. Settlement of Variance - KO88
    Accounting Entry: Finished Prod PV
                        To Production Order SEt
Regards,
Durga

PP Make to Order Cycle.

Hello,
Client Input:
Currently, we create finished product such as 11KG LPG filled bottle by using a manual Production order based on BOM with basic materials such as Bulk LPG, empty bottle and refilling charges per KG. Our requirement is to automate the assembly or production of the finish good(LPG filled bottle) in background during Delivery/Goods Issue (if possible) wherein components(Bulk LPG, empty bottle and refilling charge) are automatically consumed based on BOM.
        for example, the customer placed an order for an 11KG filled bottle. the person creating the order will just input the filled 11KG LPG bottle even without inventory, if the sales order is ready for delivery, the system will automatically assemble the 11KG filled bottle based on BOM during Goods Issue. However, the question is what will happen to the finish product that was issued if we suddenly decide to cancel the delivery, will the system return the product as finish good and we need to manually reverse it to return the raw components?
In reference with the above requirement, kindly let me know, is it possible to auomate the process so as to create the Prodcution order automatically.
Also in case of cancellation of Sales Order,   what are the steps to be followed?
regards..chaitanya

Hi,
Pls. go through the following link :
[Make to Order Cycle|http://www.sap-img.com/production/discrete-manufacturing-the-made-to-order-cycle.htm]
Hope this helps you somewhat.
Regards,
Tejas

Actual cost are not updating in prodcutcost collectors ( KKF6N) - Variances

Hi SAP's
We are facing the problem with the Variance calculation for product cost collectors.
The issue is When we are calulating the Variances for prodcut cost collectors the actual costs are not ( For few materials of BOM) updating.
Because of these the variances are showing high.....If I settele this variances to COPA, my copa report is will be going wrong.....
Please help me to comeout of this problem.
Thanks in Advance
PrasadReddyS
FICO Consulatnt

Hi Anand
Please add the budget profile at Plant maintenance order level no need to add any substitution rule
budget should also be control at order level
Thanks
trinath

Some of the orders are not appearing in KOC4

Hi,
While running the trnasaction KOC4, Some orders are not appearing.which are appearing in KKBC_ORD.
Please guide me how to get the same in KOC4.
Thanking you in anticipation.
With regards
Aniruddha

Some pages may not have all the fields in the xml even though they are being shown on the UI.
Possible reasons I can think of are:
1) Beans are rendered dynamically through controller code
2) Page is using regions or other pages by extending them. There is Extends property in Property Inspector and if filled, those attributes from the extended page can also be seen.
3) Personalization to add elements on the page
-- Thanks

IPad Group Contacts are not appearing in itunes

I have a Group Contacts app on my ipad mini that syncs with the contacts on my iPad. I created 4 groups. I want to import those groups into Outlook. I tried opening up icloud, select all, export. Only the 1st contact in that particular group is exported. I then deleted and reinstalled itunes and my groups are not appearing.

Have had same problem and read many different posts on the discussion boards. Came to my own sort of hybrid solution that's posted below:
Backup address book.
Turn off syncing to iPhone within iTunes, and then hit Apply to make sure it takes.
Quit Address Book, iTunes, and basically everything.
Go to Finder > Library > Application Support > Address Book … move all folders out of there EXCEPT the Metadata folder.
Go to Finder > Library > Application Support > Sync Services … move everything out of there.
Reboot computer.
Open address book.
Open iTunes, connect iPhone, and sync.
NOTE: I had to play with these steps, and their order, several times to force iTunes to properly reflect what’s in the address book/contacts, but after about the sixth time it worked.

In case of Factory sales, ECS values alone are not appearing

Hi friends,
In case of Factory sales, ECS values alone are not appearing in the sale order
and billing document even after maintaining excise rates in J1ID as 2% and condition
record as 100% for both JECS and JECX condition types, finally I checked with tax
code but still I am facing same problem. But same 2% values are appearing in J1IIN
screen.
Please help me out in solving this problem.
Thanks and regards,
Swamy H P

Dear Swamy
Ensure the following in your pricing procedure, for condition type JECS.
- The "From-To" step number should be the step number of JEX2.
- The Calculation Type should be 366
- For JEX2, Calculation Type 353 and Account Key EXD are maintained
thanks
G. Lakshmipathi

Pricing ZCondition Types are not appearing in Condition Record Maintanence

Hi All,
We have a requirement in SAP CRM Opportunity Management where the pricing determination should happen. So, to facilitate the requirement we have done the following
Downloaded the DNL_CUST_CNDALL and DNL_CUST_CND from ECC to CRM
But the Problem is when I am trying to maintain the Condition record in T-Code "/SAPCND/GCM" 　our Z-Condition types are not appearing in the list, also in Product Master Condition Tab.
Please suggest me how to resolve this issue.
Regards,
karthik J

Hi Karthik,
As a best practice -
1. If you are downloading the condition type and pricing procedure from ECC, then it is advisable to use ECC as a master system for all your Z condition type/condition record maintenance.
2. Similarly if you are using Pricing procedure as of ECC, then ensure that the downloaded pricing procedure in CRM is used for pricing procedure determination.
3. The condition record in T-Code "/SAPCND/GCM" is advisable to use if you are mainly using CRM Pricing.
By looking at your problem statement you are using ECC pricing procedure, condition types by downloading it to CRM.
If you have any other comments to make, please give the exact problem statement or any appropriate problem screenshot for further analysis.
Hope this will be useful
Thanks and Regards
DJ

Tax Code and Tax Amount Fields are not appearing

Hi to all,
While making Downpayment Request (F-47) Tax Code and Tax Amount Fields are not appearing in the screen.
for more clarity...
suppose PO is 1150 include all taxes ( Amount 1000+ Tax Amount 150)
as per agreement with vendor we need to raise DR for 1150 and based on DR we will make downpayment to vendor (F-48)
But in F-47 screen Tax Code and Tax Amount fields are not appearing.
Could any body help me on this??
Thanks in Advance
Regards,
Schilukuri

why you are looking for tax code field, pay gross amount as per PO, same amount will update in PO history as well as Vendor account.
Even if you find the tax code field and check the tax code check box, system will not calculate tax at the time of down payment or down payment request.
Please remember that by default standard SAP provides the tax code field in f-47 or F-48.

Rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present includeing Adobe Flash

rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present including Adobe Flash

If that only happens on a specific page or domain then make sure that you do not block images on that domain.
See [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the Media tab of that "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
*You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
*You can see all image exceptions in Tools > Options > Content: Load Images > Exceptions

Tax Levels are not appearing in PO

Dear All,
I am using Taxinn and i am maintained Conditions in FV11 on Plant/Tax Code Level.
While raising PO these values are not appearing.
Regards
amey

Hi,
Once you have maintained the tax condition record through FV11, you have to come out of the PO creation transaction and again try to create PO. (Sometimes it is required). As mentioned above, it is necessary to check the date of the condition record should cover the date of creation of purchase order. Also check the condition record you entered is not deleted by somebody.
Also check the company code assignment to tax code as mentioned above reply.
SPRO->Logistic General-> Tax on Goods movements -> India -> Basic Settings -> Maintain Excise duty -> Conditionbased excise determination -> Assign tax codes to company codes.
Thanks,
Harikrishnan.
Edited by: Harikrishnan_sap on Aug 13, 2010 3:52 AM

My downloads are not appearing in music

After adding music (either by CD or by itunes purchase) my songs are not appearing in Music.

I'm having the same issue. Just downloaded two songs and they show up everywhere but the iTunes music library. No matter what I try, I can't make them show up there. Never had the problem before today.

Descriptions of Iphoto are not appearing in Front Row

I have several slideshows of photos in Iphoto. Those slideshow contains descriptions for certain photos.
When playing those slideshows via Front Row, the descriptions are not appearing.
Further, only the first track of music linked to those slideshows is playing and repeating its own, instead of going over to the 2nd and 3nd music partition.
Any idee how to solve those problems? Will Front row on the apple Tv or on the Mac mini show the same ?
Many thanks.

First of all many thanks for your help.
In Iphoto, below on the left of the window, when you select an album, you see the title, the date and hour, the Key word, the type and size of the selected photo in the album. Below that is the 'description' that you can enter. This description is displayed in Iphoto when playing the photo show. This description is also transferred to Idvd, what means that it is possible to burn a Dvd to be watched on your Tv. Synchronizing the same album with the Ipod transfers the photos but not the description. And, in my opinion, there is no way to do it. Exporting the album gives the possibility to select the title and the key-word of the photo, but not the description. I tried this out, and unfortunately it is not working (only the title is transferred). Exporting the same album to as Web Page gives the possibility to select the description for export.
As I am eventually interested in the acquisition of a Apple Tv or a Mac Mini as Media center, I tried on my Imac to use Front Row in order to be sure that the 'description' of my photos will show on Tv as it is the case via a Dvd.
And in fact, the 'description' is not taken into account by Front row.
I hope that this long story is clear enough and that somebody has a solution.
Thanks

In make to order cycle semifinished costs are not appearing in itemisation

Similar Messages

Maybe you are looking for