Actual cost are not updating in prodcutcost collectors ( KKF6N) - Variances

Hi SAP's
We are facing the problem with the Variance calculation for product cost collectors.
The issue is When we are calulating the Variances for prodcut cost collectors the actual costs are not ( For few materials of BOM) updating.
Because of these the variances are showing high.....If I settele this variances to COPA, my copa report is will be going wrong.....
Please help me to comeout of this problem.
Thanks in Advance
PrasadReddyS
FICO Consulatnt

Hi Anand
Please add the budget profile at Plant maintenance order level no need to add any substitution rule
budget should also be control at order level
Thanks
trinath

Similar Messages

Actual Cost & Quantity not update in Process Order

HI,
Process order confirmed from Production person before maintain the actity price rate.
hence those confirmation are gone in to the error & found in t.code COFC
afterword the activity rates are maintained & we reprocess those confirmation thorugh COFC, now there is no COFC entries
but still actual quantity & cost not updated.

Hi Ajay
'Z_UPD_ACT_IN_OPR_UNICODE in the note 736018.... Ask your ABAPer to implement the program and execute the same
You may need to raise an OSS message incase the program is not available to download
BR,Ajay M

Actual Costs are not captured in Production Order

Hi Experts,
I'm not able to see the actual costs for a production order. We made the cost estimate for a material for this month. We created the production order and partial confirmation also done. In production order i'm able to see the target cost only. I'm not able to see the actual cost for the production order after confirmation.
In routing costing relevancy tick mark is available and in work center i maintained the cost center and activity types also.
Can you please share anything is missed for getting actual cost for a production order.
Naren

dear friend,
you would finally confrim order (set CNF status) and try again.
also chack out you master data:
-material master (possible Acc1-2 and Cost1-2)
-work center (say,did you set a valid Cost center there?), are activities set up? usage? validity?..
-routing (header data and control key at item level)
check out your control key against the 'Cnf' and 'PrtCnf' checkboxes...
good luck!

Actual Cost is not updating in Production Order & WIP

Dear All,
I have issue in production order and Work in Process not getting Target Actual cost in costing view CO03 & KKAY.
Is there any settings or transaction missed out? Please guide me how to sovle the issue.
Thanks & Regards,
Venkat.

Dear,
Please check,
For Target cost
1. Your std cost must be released before Goods Receipt
2. There must be goods receipt posted on the prod order
3. You must calculate variances in KKS1/2
For Actual Cost
1. Post Goods receipt and Goods issues
2. See if any mat movements are pending in COGI
3. Ensure that operation is confirmed in PP and no entry is lying in COFC
Also in CO03GotoCost-Analysis--Here change the lay out and check it.
Regards,
R.Brahmankar

Actual cost are not posted

Hi all,
I am doing Purchase Order against project for service,assigning WBS Element in it,
and doing service entry sheet against that P.O.
But I am not getting plan & actual cost reflected in Project builder & reports.
Is there any setting for getting Plan & Actual cost ?

Have you accepted the service entry done? Actual Costs wouldn't appear unless you accept the service entry.
If you haven't done planning (T Codes CJR2 or CJ40), Plan costs wouldn't appear on the WBS.
You should be able to see commitments on the reports if you have the configuration settings for commitments.
Regards
Sreenivas

Cost are not updated in the PMIS.

Dear All
I am using ECC 6 in our companey. Till July 2008 the cost for Internal Material,External Material cost, Internal wage cost, External wage cost, & service cost were showing properly. But from the month of august it is not getting updated. It is showing zero for all value catagories. No. customization changes have been made in system. No Wrong cost element used during actual postings also.
What can be the reasons??
Regards

Dear all
Is it necessary to maintein the Value category in following setting for cost display in PMIS?
SPRO>Plant Maintenance & Customer Service>Maintenance & Customer service processing>Basic Settings--->Settings for Display of Costs
Is it necessary to assign cost element to Value category in following setting for cost display in PMIS?
SPRO>Plant Maintenance & Customer Service>Maintenance & Customer service processing>Basic Settings->Settings for Display of Costs->Assign Cost Elements to Value Categories
Regards

GR's are not updating "Actual" Value under the limit tab in PO

Hi Friends
Can anyone tell me the possible solution for GR's value are not updating in the "Actual" Value under the limit tab in the service PO.
Thanks in Advance

Hi,
I hope this is a service PO with item category D and the GR you mean is the service entry sheet.
Do you have an entry in the Purchase order history for the PO for this?
Do you have an acceptance for the service entry sheet which is complete?
Best regards,
Sridhar

KP06 Plan Values are not updating in Cost center report

Hi,
I have configured KP06 and uploaded through excel,It is getting uploaded successfully.
But after uploading planned values are not updating in the S_ ALR_87013611 Report.
What could be the reason.kindly give me some inputs regarding this.
Thanks
Supriya

Hi Supriya,
After uploading the entries have you saved or have you verified with excel values.
Please check.
Sateesh

Actual overheads are not caluculated

when i excute the transcation tcode:kgi2
actual overhead cost is not updating the report. where i need done mistake.
please try to give the solution asap
with regards

Please check you are putting the correct order, period & year in t-code KGI2.
Another thing that order must contain the cost for calculation for that period.

Changes to BI web templates are not updated

Hello BI Experts,
I need to find a way to advise my portal resource on how to resolve a problem we are experiencing.
When we make a change to a web template, the changes are not updated and it appears that the old version is cached. The only way we can get the new template to show is to bounce EP.
Does anyone have suggestions where we can find the appropriate global settings to set the cache so that EP will retrieve new BI content as it is modified?
Thanks in advance for any help.
Tom

Hi Tom,
If there is some incorrect setting in the portal, the WAD templates does not get saved after the first Save action.
I am not sure of the setting which needs to be done. But I can provide you an alternate solution. If there is no other issue than the templates not getting saved, you can use this.
You can save your changed template using 'Save As' in a different name and then you can delete the original template. Afterwards, you can save this template with the actual name.
I hope this would solve your problem.
Regards,
-Neethu

KSPP -Scheduled Activity are not updated for last 2 periods

Hi All,
When we run KSPP by using LTP, noticed that for one cost center and activity type the plan scheduled Acivities are not updated for last 2 period's.(shows Zero)
Do we miss any thing.
Regards,
Raj

Hi,
It can be due to the sales demand you have uploaded and the Lead time in the material master
because of the that, the demand gets shifted before (say, Dec demand gets shifted for manufacturing in October) and the activity qty in the last month comes zero
So, upload 14 months demand where 13 and 14th month is the same as 12th month... Most of the companies do this way
Ajay M

Overhead Cost Element not update

Hi,
I have created Cost sheet , assigned to Production plant, for FG Material,
Overhear updated when run SCE, and production order also updated but after settlement secondary GL a/c with Credit cost center not update. in system show no value in particular overhead
Please help me
Thanks & regards.
Vinu.

Hi Ajay,
Yeah I have maintained inventory valuation (Fixed and variable costs)
overhead cost should be calculate, Fixed and variable cost so i have maintained (Fixed and variable costs)
in cost sheet i have maintained only plan rate not actual.is it ok ?.
Thanks & Regards.
Vinu,
Edited by: vinutha1010 on Oct 25, 2010 7:37 PM

OPM Actual Costing (PMAC) not including AP Invoice transactions

Hi,
OPM Actual Costing (PMAC) not including AP Invoice transactions in 12.1.3 version. We have set profile GMF:Include Receipts in Actual Cost = 0, GMF:Include Invoices in Actual Cost = 1 still AP Invoice not included in OPM Actual costing.
Observed, Invoices which has IPV are shown as in Actual transaction view with line source as "Invoice Price Variance". I was looking for a line source with "AP invoice" and "IPV"(if exisits) in Actual transaction view screen.
Thanks,
Solomon.

Hi,
did you run the extract AP charges request ?
thanks .
Ahmad.

Split valuation for Finished Goods - Target cost was not updated

Hi,
We are following split valuation for 'Finished goods'.
Valuation typte 1 is for 'manufacture' and
Valuation type 2 is for 'External procurement'
For production orders with this material, we are not getting target costs. It is showing zero.
We have done release of standard cost estimate before creation of production orders and goods receipt for these orders. But still it is not updating.
Pls guide me.
Regards
MadhuSekhar Gupta

Hi,
Thanks for your reply.
At the time of variance calculation only the credit part of target cost will update and at the time of goods receipt debit part of the target cost will update.
Our client has done goods receipt but debit part of the target cost was not updated. and the order status is DLV.
I simulated the scenario in QAS by creating new finished goods materials (Industry-Construction) one is with split valuation and another is without split valuation, then the debit part of target cost was updated at the time of goods receipt and credit part was updated at the time of variance calculation for both the materials. So this problem was not arised because of split valuation.
Was this problem arising because of the material master data, because for one material it is updating and for another it is not for the same configuration?
Regards
MadhuSekhar Gupta
Edited by: gms gupta on Oct 22, 2011 3:39 PM
Edited by: gms gupta on Oct 22, 2011 3:41 PM

Actual activity price not updating in production order

Hi All,
I am facing one problem, that actual price for activities are not updating in production order while plan price are updated. Earlier both plan and activity prices were getting upadated but now actual price is not updating for any material. I have tried at the same material also but it is not getting updated. Actual hours are updated in confirmation of production order but not price. If somebody could suggest the reason it will be great.

Dear Nitin,
Thanx to all for valuable input. Problem is solved.
Nice to see That your problem is solved
But Can you let the Forum Members know
where was the exact problem & how it is solved
Regards
Madhu Kumar

Actual cost are not updating in prodcutcost collectors ( KKF6N) - Variances

Similar Messages

Maybe you are looking for