In ME23N where do the data saves in TEXT TAB (means tables)

HI,
i have small problem in ME23n screen regarding wher do data gets saved means in which table.
in ME23n , In Header we have TEXT TAB,
                                                                 In tht we have HEADER TEXT -
In this we have option for entering
HEADER NOTE
                                                                                PRINCING TYPE
in which table does the data entered in header note will be saved.
please tell table name where this data get saves.
thanks in advance.

Hi ajju_bobby ,
these texts are text modules and they are saved in tables STXL in raw format.
you can get the text via FM read_text.
Double click on text edit control - choose GOTO>HEADER then you get detailed info of the text module, usefull for using the FM
regards
rea

Similar Messages

HT201364 My imac running OS 10.6.8, and want to install software that needs OS10.7. The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac". Older upgrade better? How to proceed?

My imac running OS 10.6.8, and want to install Garmin software that needs OS10.7.
The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac".
I feel an older upgrade than Maverick might be better for my machine?
Is it possible to upgrade to ie, 10,7? or another recommended upgrade.
How to proceed?

Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

How do I figure where is the data in a materialized view coming from

Hi: when I run select NAME, OWNER from dba_mview_refresh_times, I see a number of materialized views. How do I find more details about this view i.e where is the data coming from and which fields. The source table that is in another database changed. But the view on my database where the materialized view exist has not changed. I want to confirm from where is data coming in this view
TIA
Ravi

SQL> select * from dict where table_name like 'ALL%MVIEW%'
TABLE_NAME                     COMMENTS
ALL_BASE_TABLE_MVIEWS          All materialized views with log(s) in the database that the user can s
                               ee
ALL_MVIEWS                     All materialized views in the database
ALL_MVIEW_AGGREGATES           Description of the materialized view aggregates accessible to the user
ALL_MVIEW_ANALYSIS             Description of the materialized views accessible to the user
ALL_MVIEW_COMMENTS             Comments on materialized views accessible to the user
ALL_MVIEW_DETAIL_PARTITION     Freshness information of all PCT materialized views in the database
ALL_MVIEW_DETAIL_RELATIONS     Description of the materialized view detail tables accessible to the u
                               ser
ALL_MVIEW_DETAIL_SUBPARTITION Freshness information of all PCT materialized views in the database
ALL_MVIEW_JOINS                Description of a join between two columns in the
                               WHERE clause of a materialized view accessible to the user
ALL_MVIEW_KEYS                 Description of the columns that appear in the GROUP BY
                               list of a materialized view accessible to the user
ALL_MVIEW_LOGS                 All materialized view logs in the database that the user can see
ALL_MVIEW_REFRESH_TIMES        Materialized views and their last refresh times for each master table
                                that the user can look at
ALL_REGISTERED_MVIEWS          Remote materialized views of local tables that the user can see
13 rows selected.

Where is the data saved in the srtucture for a particular tcode

Where is the data saved in the srtucture for a particular tcode.
For eg in MM01 there is a field with RMMG1
where dioes the data get saved from this field as in backend it shows the stucture and the structure can hold data only at runtime,
Please help me
Thanks in advance
chinnu

Hi,
The strcuture : RMMG1 holds data at run time only that to it can hold only one record at a time.
so we use this structure to hold data at run time and then we insert those values into database tables for that program.
Here you can the values stored and processed in the program in the tables : MARA (for matnr ,mbrsh,mtart..),MARC (for Plant ),MARD( for storage location : lgort )...etc.
so if you want to fecth some data means first you have to choose right table to fetch information by passing values in the selection screen.
Regds
Sivaparvathi
Please reward points if helpful...

HT4796 after transfering data froAm my pc to mac using windows migration assist, where do the data go to on my mac please?

after transfering data froAm my pc to mac using windows migration assist, where do the data go to on my mac please?

Welcome to the Apple Support Communities
By default, Migration Assistant creates a new user account where it puts all the transferred data. Just go to  > Log Out, and log in the new user that Migration Assistant has created, so you will be able to access to the transferred data.
If you want to merge the data into the first user account, use the Shared folder (it's in /Users/Shared) to put the transferred files there, and then, on the first user, go to the Shared folder and put all the data in the folders you want

Where is the data held in Max 3.0

Hi,
Not sure if this right place to post this but as MAX 3.0 was installed with labVIEW 7.0.....here goes..
With Max 2.0, the data assoicated for GPIB, VISA and IVI was held in two places, IVI.INI and VISACONF.INI.
Now Max 3.0 arrives, so where has the data gone. There still is an ivi.ini but it doesn't contain all the data. Visaconf.ini still seeems to be the same.
I can still see most of the settings for drivers, logical names etc when I launch MAX 3.0, that used to be in my old ivi.ini file. So where does it store them now.
Also, what has happened to the default settings that used to be defined for a logical name?
Looking, in the MAX folder there are a load of LV VI's in the MAX\Assistants\LVCGen, what are these used for
I have looked, at the Max help but its a bit vague.
Can anyone shed some light.
Regards
Ray Farmer
Regards
Ray Farmer

Hello Ray,
With installation of LabVIEW 7.0, you have also installed MAX 3.0 and IVI Compliance Package 2.0. The IVI Compliance Package (ICP) 2.0 is a software package that contains IVI class drivers and the support libraries necessary for the development and use of applications that leverage IVI instrument interchangeability. The IVI Compliance Package also is based on and is compliant with the latest version of the instrument programming specifications defined by the IVI Foundation.
One of the most prominent changes between previous IVI products and the IVI Compliance Package is the way that the IVI Engine, IVI MAX configuration utility, and other IVI products included in the IVI Compliance Package access and store configuration information. The Configuration Server provides
a database for storing configuration data and an API for accessing this data.
This database is called the Master Configuration Store. Various IVI products have been redesigned to work with the Configuration Server instead of the previous method, which involved using the ivi.ini file.
If you have any configuration information stored in the ivi.ini file, the installer converts the existing ivi.ini data into a new format that is used by the Configuration Server and stored in the Master Configuration Store file (IviConfigurationStore.xml). This conversion process, which takes place when you install the IVI Compliance Package, removes the converted items from the original ivi.ini file as it places them in the Master Configuration Store database.
The installer also creates a backup copy of the ivi.ini in the same directory as the original ivi.ini.
If, after you install the IVI Compliance Package, you run an older specific instrument driver installer that adds entries to the ivi.ini file, you can convert the newly installed configuration data by running MAX, which monitors the ivi.ini file for changes. If MAX detects any changes, it launches a conversion utility automatically before loading the configuration from the Master Configuration Store file. Also, you can run the converter utility manually by selecting Start�Programs�IVI�Tools�INI to XML Converter.
There are a few KnowledgeBase entries on ni.com on this topic:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/b83c7bbd43fd855486256cd10077ef06?OpenDocument
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/72f3656387deaefa86256d180062862c?OpenDocument
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/33b3f3ea0f305a3386256d170064f02d?OpenDocument
You can also find more information in the ICP Release Notes.
I hope this helps.
Regards,
Vesna Jadric
Instrument Drivers/IVI

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is.

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is to do so. Putting my Mac Pro onto icloud synching contacts resulted in duplicate and triplicates of the same cards. I have a few THOUSAND contacts and the last time this happened was on mobile me. that had a function where you could replace info on the mobile me server with info on the computer. I see no way to do that on the new cloud.

In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
For TM restores, see Pondini's TM FAQs for starters, since I don't use TM.

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
(ON the Phone) Sticky note like program WM5
I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
Thanks.

Hi,
I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
Regards,
Zoltán
http://www.clamagent.org - Free Antivirus for Exchange
http://www.it-pro.hu
http://emaildetektiv.hu

E-Recruiting: Where are the data?

Hi!
I'm new here. I'm trying to learn something about E-Recruiting. I have one elementary question. So thank you very much for your help.
Where are the data of the applicants (talents) stored? I saw that there are infotypes (5000 - 5nnn). But are these infotyps on the hr-system? Or are these infotypes on an own E-Recruiting-System? So witch data are sent to the HR-System?
Thank you very much for your help!
Richard

Hi,
This will tell you everything abt e-recruiting.
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/72/c9b54015c4752ae10000000a155106/frameset.htm">e-recruit</a>
Regards,
Amit
Reward all helpful replies.
Check these links -
<a href="http://www.purdue.edu/onepurdue/contribute_pdf/e-Recruitment1.pdf">e-recruit1</a>
<a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PARC/PARC.pdf">recruitment</a>
<a href="http://www.sap.com/solutions/business-suite/erp/hcm/erecruiting.epx">SAP E-recruit</a>
You may also take a look at the google for e-recruiting as there are ample case studies available for reference.
Message was edited by:
Amit Khare

Where is the data source configuration in Jdev 11g?

Does anybody know where is the data source configuration in JDeveloper 11g? I want to create a JNDI data source using the database connection. Do I have to login the Integrated WLS to create the data source? Thanks.

Hi Chris,
Configuring the data source in Integrated WLS works for me. Thanks for your help!
Looks 11g didn't create the data source automatically in the App Navigator. I checked the deployed application directory - "Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestDS\adf\META-INF" and "Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestDS\META-INF". I didn't find the data source file - data-sources.xml. Then I started the web application and checked the Context, I can only find the data source which I defined in the Integrated WLS. It is interesting that 11g removed the JNDI list from the RMI bindings.
Also thanks to Nick for the information. We are migrating a Spring Framework application to Oracle and don't use ADF Business Components in this project.
Huaichen

Where is the "data" stored???

Which table or where is the "data" stored when new users are created inside of Portal? I've been to the Portal Navigator page and can view the many, many classes, triggers, tables, etc.. but find it a bit overwhelming to try and look for stuff. How can one maneuver around the different schemas easily? Is there a way to tie in a visual tool that can show the objects and schemas of the db?

hi,
the users are stored in the table called WWSEC_PERSONS$ and the groups are stored in WWSEC_GROUP$.
i'm using the SQL Navigator to go thru all the components of the product.

Where does the data come from which powers the ship date and delivery date

Hi All,
Please let me know, where does the data come from which powers the ship date and delivery date?.
Adi.

Hi,
DELIVERY DATE will be maintain in the SALES DOCUMENT TYPES in VOV8 in the tab REQUESTED DELIVERY DATE/PRICING DAE/PURCHASE ORDER DATE.
The field is PROPOSE DELIVERY DATE .
If you check the field then the document created date will be the Requested date and will be carried from ORDER TO DELIVERY.
If you want the delivery date other thann the CURRENT date then you have to maintain the LEAD TIME in days in the same tab.
SHIP DATE: is the date on which you do the PGI in the delivery .
Please check them and revert back if u need further details
thanks,
santosh

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

How to delete the data from SAP R/3 DB table from BW

Hi,
I am facing an issue... I have populated the data into custom r/3 DB table by running a user exit.I am getting the data and loading(Full Load) it in BW ODS. But my problem is when i rerun the user exit it is giving me a short dump saying "SAPSQL_ARRAY_INSERT_DUPREC". when i delete the enteries of DB table it is working fine. But this fine in development.but i production i cannot do this.So i want to delete the DB table enteries by an ABAP program and call this ABAP program using Process chain when my ODS data LOAD is successful. How to go About this.
P.S: I want only to delete the DB table enteries not the DB table.....
Thanks and Regards
Sairam phani

Sairam,
why don't you just add the code for deletion of records into that user exit, so it would first delete entries and then write new ones.
Alternatively, you could use a Process Chain to trigger an event in R/3, and by that event a scheduled job would run, deleting entries from that table.
As I don't know details of the solution you're implementing, that's all I can think of now.
Cheers,
/RB

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

In ME23N where do the data saves in TEXT TAB (means tables)

Similar Messages

Maybe you are looking for