Different configuration issues between the DEV and QAS

Dear friends,
I have 2 synchronize soap-xi-proxy and proxy-xi-soap scenarios, therefore I create a business service 'customer' and the soap communication channels.
In the DEV environment, I have only one client (DEV_100) for the unit test, so there's no problem.
Unfortunately in the QAS environment, we have several clients: QAS_500 for integration test, QAS_600 for UAT, QAS_700 for the end user training, as the test schedule can't be one by one in order, I have a requirement that I must support the multiple tests in the same time.
I could transport the configuration objects with different transport targets for the proxy-xi-soap scenario and use the virtual receiver for the soap-xi-proxy scenario, but it looks like ugly and we need to have at least 3 times configuration objects when comparing to the DEV environment.
Could anybody tell me how we design or transport the configuration scenarios better for achieving the requirement?
Thanks and regards,
Bean

Hi bean,
Please have a look at the following link and see if it helps you.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
Best Regards
sorry, I didn't find any information which could help me in this scenario, anyway thanks so much for your kind help.

Similar Messages

Configure SSO between the SAPGUI and ECC 6

Hi,
I need a help to configure SSO between the SAPGUI and ECC 6. I configured the SNC using the parameters:
snc/accept_insecure_rfc = 1;
snc/accept_insecure_gui = 1;
snc/accept_insecure_cpic = 1;
snc/identity/as = p:Domain\SAPService;
snc/enable = 1;
snc/data_protection/use = 1;
snc/data_protection/min = 1;
snc/data_protection/max = 1;
snc/gssapi_lib = D:\usr\sap \ <SID>\SYS\exe\nuc\NTI386\gssntlm.dll.
I configured desktop with the DLL sncgss32.dll but is not functioning. Somebody has some idea the how solve this problem?
Thanks
Alex

Hi Alex
You have
snc/identity/as = p:Domain\SAPService;
Check the following (wrong user)
snc/identity/as = p:Domain\SAPService<SAPSID>
Where SAPService<SAPSID> is the user who runs the SAP System.
You have
snc/gssapi_lib = D:\usr\sap \ <SID>\SYS\exe\nuc\NTI386\gssntlm.dll
Check the following (nuc is a wrong directory, the correct is uc)
snc/gssapi_lib = D:\usr\sap \ <SID>\SYS\exe\uc\NTI386\gssntlm.dll
Please, reward points if helpful
Edited by: Eydar Del Angel on Apr 21, 2008 4:54 PM
Edited by: Eydar Del Angel on Apr 21, 2008 4:55 PM

Importing Program from Production System to DEV and QAS.

Hi All,
I have 3 Systems in my Landscape.
DEV-> QAS-> PRD
One of my Z program is running in the Production system.
This Z program is got deleted in the DEV and QAS.
How can I import the Program from Production System to QAS and DEV.
Regards,
Viji.

hi Vijaya laxmi,
you can goto Production system ---> SE38/ SA38 and copy the program and create the same in program using SE38 in Development system and then transport it to Quality system.
You can also Re-Import the Request from Production to Dev system.
Thanks,
Nelson
Edited by: Nelson karunakar on Sep 18, 2008 7:15 AM

What is CTS ? what is the role of CTS in between DEV and QAS?

Dear
What is CTS ? what is the role of CTS in between DEV and QAS?
Thanx & Regards
Mohamamd Nabi
[email protected]

hello, friend.
actually, you can search for subjects like this in the threads archive. you will be pleasantly surprised to find that there are already many threads with similar issues and that you can find answers to even more otherwise unrealized questions. and you don't have to wait for anyone to reply.
it looks like the issue is urgent for you, and this is why i am attaching this feed from Sadhu Kishore, which was posted some time ago... (if he replies to your thread, you may choose to award him points).
"Hi,
The transport workflow provides a framework for transporting enhancements or new developments of existing business functions in a system landscape. It provides a direct connection between development and transport administration. The transport workflow manages the transport process, determines the user for each individual step automatically, and then displays an interface which they can use to perform the task directly.
It is an efficient method of transporting a selected number of requests into a group of transport targets, and uses clearly defined approval steps to ensure the quality of your target systems. The requests can be transportable change requests, Customizing requests, relocation transports or transports of copies. The transport targets do not need to be located on defined transport routes. However, the transport workflow can involve some risks, caused by the dependencies between transport requests:
Import sequence
It is important that you import requests in the correct order, so that development work is up-to-date in the target system.
Incompleteness
It is important that the functions transported in the transport proposal are complete; otherwise errors may occur in the import system.
A request is not imported, but it contains an important data element. You use another request to transport a table that references this data element. Since the referenced data element does not exist in the target system, activation errors will occur when you import the second request.
The transport workflow is a generic workflow. Its ability to process the transport route configuration in TMS enables it to adapt itself to any system landscape. This means you can transport multiple requests into multiple targets, even if these targets are not located on the transport routes.
This reduces the amount of work for the transport administrator significantly. The automated nature of the workflow also reduces the likelihood of errors during transports.
You can use the transport workflow in two different ways.
Transport workflow as a transport strategy
If you have production systems in your landscape that can only accept approved transports, we recommend that you use the transport workflow to organize and coordinate the transport process.
To do this, set Workflow-controlled transports as your transport strategy and configure the transport workflow.
When you release a transport request, the transport workflow starts automatically and the screen Create Transport Proposal appears. The requests are then released implicitly when the transport proposal is sent to the transport administrator.
Special transport workflow (mass transports)
You can use the special transport workflow to make transports that do not follow the defined transport routes or that take place outside the normal transport schedule (part of the mass transport strategy). These transports may be corrections made in the development system that have to be transported into the production system without delay.
To use the special transport workflow, set Mass transports as your transport strategy and configure the transport workflow."
thanks. you have been most generous.
regards.

Special Characters issue in DEV and QAS

Hi,
I am uploading a file that has special characters (Japanese).
In the DEV system the special character is converted to #. Which the business wants.
In QAS system the special character is not converted and is as it is, which makes the business users difficult to find out if any speical characters are there and they don't want the special character as it is
The file consists millions of record with a possibility of four or five records with special characters
The special characters on keyboards is not an issue.
The programs in DEV and QAS system are same and the file tested is also the same but different results.
Tried in Tcode SNLS to find something but didn't know what and where to look into.
What could be the issue in this? Looks like this is Basis issue but would like to know if anyone can let me know.......
Regards
Sandeep

Hi ,
i want to check ur open dataset statement in the program which is being used here if at all in ur case.
Can you please check the relavant code page in both the D and Q systems and search with the appropriate hexa decimal values(for the special characters ) in both the systems ..
u can use code page by tcode scp ..
ex -> as u say a special char sp1 is having entry in q and code page which is being used (like 4200 )
is not having in d03 .
then if in d03 this page has no entry then it shows as # , since it is showing in q then it has an entry over there. this is my guess..
so if at all the client wants not to see this special char's , u need to remove them from this code page.. and check ..
Cant say if this can solve but u can take this as one more way of dealing with code pages and special chars....
br vijay..

Compare SPRO between DEV and QAs

Hi there,
I'm in GoLive eve and all consultants are desperate with the future problems.
Is there a way that I can compare the customizing (SPRO) between DEV and QAS or another system?
Thanks,
Dany Anderson
Edited by: Dany Anderson Alves on Mar 4, 2008 9:03 PM

Hi,
Use comparison tool in SCU0.
Select SAP Reference IMG and ssay compare.
This will show the differences if any.
You can also compare at component level.
cross system visibility should be maintained in SCC4 settings for the client
Regards,
Revathi

Does anyone know if there is any difference at all in the display between the 4 and the 4s. I use my 4 with no problems but have issues with the 5 - makes me feel ill. Any help appreciated before I make an expensive mistake

Can anyone tell me if there is any difference at all in the display between the 4 and 4s. It appears they are the same from the specs but I dont want to make an expensive mistake. I can use the 4 with no problems but the 5 makes me feel ill and I am hoping I can upgrade to a 4s with no issues. Any help appreciated.

In a technical sense, the differences between the displays on the iPhone 4 vs 4s are vast. I'm mean, they are both attached to 70 - 90% of the internal components and far from interchangeable. There are no differences however, that are noticeable by the user.

Cloning use the different gcc version between source system and target sys

Hi All,
Our system is: Application tier and Database tier is split to two servers.
We should run a cloning, but I found the different gcc version on application tier on source system and target system.
The source application tier server is RedHat Linux ES3, gcc version is 3.2.3
The target application tier server is RedHat Linux ES3, gcc version is 2.9.6
There is the same gcc version on database tier on source system and target system, they are gcc 2.9.6.
My question: Can I use the different gcc version between source system and target system when I run an erp cloning?
Thanks & Regards
Owen

Not necessarily, you might get some errors if the version is higher and it is not supported by the OS. An example is Note: 392311.1 - usr/lib/gcc/i386-redhat-linux/3.4.5/libgcc_s.so: undefined reference to 'dl_iterate_phdr@GLIBC_2.2.4'
To be on the safe side, make sure you have the same version (unless you want to give it a try).

When I use the type tool or the selection tools, my photos blink between the photo and a black screen. Anyone else have this issue?

When I use the type tool or the selection tools, my photos blink between the photo and a black screen. Anyone else have this issue?

Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

Reset the SMC, as per > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then retry the Disc Drive.

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

PRD installation in a differenet domain than DEV and QAS

Dear Experts,
I need to install SAP ECC 6 and PI 7.1 on production servers.Our dev and qas servers are running in the domain X(for eg) and the PRD servers are in the domain Y(for eg).All the servers are supposed to be in the same landscape.Do I have to include the prd servers also in the same domain as dev and qas or will it cause any issues running them in different domain ?If it gives issues pls let me know the the kind of issues it will be as I need to give my IT team proper reasons to run all the servers in the same domain.
I know some reasons like servers should be in the same domain if we use common transport directory.
Please let me know if there are any other reasons.
Regards,
Dinakar
Edited by: mutnuru dinakar on Apr 13, 2011 7:19 AM

Hi Sunny,
Thanks.your notes are helpful.From PI point of view,running dev PI and prd PI in different domains will cause any issues?
Suggestions of others will also be appreciated.
Regards,
Dinakar
Edited by: mutnuru dinakar on Apr 18, 2011 1:44 PM

Not able to comapre roles in DEV and QAS using SUIM?

Hi,
I am trying to compare role in both DEV and QAS, DEV and PRD using SUIM t-code.
While comapring its showing that roles are in different systems, not able to comapre.
Actually role exisitng in both QAS and PRD.
Individually I can login to QAS, PRD can see the role.

For role comparision both the roles must be in the same system, in same client
Transaction code SUIM -> Comparision-> Roles
If the roles are in different system, then tranport the role into one of the system and do comparision. If no transport connection defined then, you can use the upload and download option in the PFCG
comparing
Run the t-code SUIM
Go To Comparison and select the option of roles
Click on Across systems option it will give option to select the sys name under Remote Comparison there enter the SYS ID between which system you want to do comparison and put the role name in compare role section then execute it will give you the result.
If there is any difference b/wn the t-codes it will b in red colour otherwisein yellow.

Connectivity issues between Cisco 2901 and Cisco SG300-52

Hello,
I am having some serious connectivity issues between the hosts in my LAN.
My LAN is based on a Cisco 2901 router and a Cisco SG300-52 port switch.
The issue that has been happening is that connections between hosts on the LAN (remote desktop, extended ping, etc) is very unstable, at some point I can see a 35% lost packets on an extended ping. This happens at any time of the day and from any host.
All hosts are on the same Vlan(default Vlan) and on the same subnet. Some hosts have fixed IP addresses (servers and network equipment) and others obtain their IP address trough a DHCP reservation established on the router (reserved with the MAC address of every host).
I can provide further details if needed, because this issue is very serious and I would really appreciate any insight or support.
Many thanks in advanced.
Sair Amer
EDIT: After doing every test we could think of, we finally found the reason behind this problem.
It turns out that the switch has problems handling communications between clients at different speeds, because most of the hosts connected were working at 100 Mbps but the servers were working at 1000 Mbps (and the communication between host and servers wasn't stable).
After manually setting the speed on all ports to 100 Mbps the problems have stopped.
Many thanks for you help on this issue.

Building configuration...
Current configuration : 4123 bytes
! Last configuration change at 12:06:16 PCTime Sat Jul 19 2014 by ccp
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Foninsa
boot-start-marker
boot-end-marker
no logging buffered
enable secret 5 $1$BDbJ$HN3VP8nmywrGB55RCxPd30
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
clock timezone PCTime -4 0
clock summer-time PCTime date Apr 6 2003 2:00 Oct 12 2003 12:00
no ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.10
ip dhcp excluded-address 192.168.1.151 192.168.1.255
ip dhcp pool FONINSA
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 8.8.8.8 8.8.4.4
ip dhcp pool Laptop-Sporta-Wifi
host 192.168.1.10 255.255.255.0
ip name-server 8.8.8.8
ip name-server 8.8.4.4
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-213585710
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-213585710
revocation-check none
rsakeypair TP-self-signed-213585710
crypto pki certificate chain TP-self-signed-213585710
certificate self-signed 01
30820229 30820192
quit
license udi pid CISCO2901/K9 sn
license boot module c2900 technology-package securityk9
username ccp privilege 15 password
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 190.196.21.98 255.255.255.248
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
no ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip nat inside source static tcp 192.168.1.3 21 190.196.21.98 21 extendable
ip nat inside source static tcp 192.168.1.3 80 190.196.21.98 80 extendable
ip nat inside source static udp 192.168.1.8 1194 190.196.21.98 1194 extendable
ip nat inside source static tcp 192.168.1.4 3389 190.196.21.98 3389 extendable
ip nat inside source static tcp 192.168.1.9 3389 190.196.21.98 10000 extendable
ip nat inside source static tcp 192.168.1.3 3389 190.196.21.98 20000 extendable
ip route 0.0.0.0 0.0.0.0 190.196.21.97
access-list 1 permit 192.168.1.0 0.0.0.255
control-plane
line con 0
password $
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 5
access-class 23 in
privilege level 15
password #
transport input telnet ssh
no scheduler allocate
end

Routing issue between Cisco Nexus and Cisco 4510 R+E Chassis

We have configured Cisco Nexus 7K9 as core and Cisco 4510 R+E as access switches for Server connectivity.
We are experiencing problem in terms of ARP learning and Ping issues between Cisco Nexus and end hosts.

Hi,
So you have N7k acting as L3 with servers connected to 4510?.
Do you see the MAC associated with failing ARP in 4510?. Is it happening with all or few servers?. Just to verify if it is connectivity issue between N7k and 4510, you can configure an SVI on 4510 and assign address from same raneg (server/core range) and perform a ping.
This will help narrow down if issue is between server to 4510 or 4510 to N7k.
Thanks,
Nagendra

Different configuration issues between the DEV and QAS

Similar Messages

Maybe you are looking for