In oops-alv how to get quantity.

Hi.. in oops-alv How to get gpqty(gpquantity) for each storage bin and Summerise all the gpqty for matnr,lgpla,werks combination. how to slove above problem in oop-alv. can any one provide solution. regards karthik
Moderator message : Requirement dumping not allowed, search for available information. Discussion locked.
Message was edited by: Vinod Kumar

Are you using FACTORY Method or SET_TABLE_FOR_FIRST_DISPLAY ..?
Check this http://help.sap.com/saphelp_nw04/helpdata/en/6a/e4eb40c4f8712ae10000000a155106/content.htm
hope this helps...

Similar Messages

Oops alv report not getting displayed

Hi experts,
I have REQUIREMENT WHERE I NEED TO DISPLAY THREE REPORTS USING ALAV OOPS.
I have maintained a FM to call alv rport.
,I have two validations to make at to different location in report. The report needs to be displayed only after I perform two different validations.
Issue is
I call this ALV reprt Fm once at : AT SELECTION SCREEN OUTPUT
and second time at : START OF SELECTION...
Now I can see the ALV report ( oops with three reports in one container) very well when i call it from : AT SECETION SCREEN OUTPUT( Here I perform one of teh two validations which I have mentioned above...The validation performed here is of Selction screen valiudation).
ButNow when I perform another validation at START OF SELECTIOn...here I cannot see the ALV report...TEH screen appearing is blank...
I am calling teh SAME OOPS ALV Function Module from both the locations...( START of SEL and AT selc O/p)..
I have debugged teh code and checked teh feidcatalogue genration as well s output table .and also structure
parameteers .. all of tehm are getting populated in both the cases ,,, but dont know why thye output doesnot appear in th last call..
please help ., I am stuck up...
TX a ton in adv...
Regards,
KT

Hi Kshitija T,
START-OF-SELECTION is processed in PAI of selection screen - as soon as all processing is done, the program flow will return, initialize your program an all of it's objects and display the selection screen again.
I solved this by disabling the default report status EXECUTE button and used AT-SELECTION-SCREEN events.
Regards,
Clemens

ALV : how to get checked datas

Hello,
I'm using REUSE_ALV_GRID_DISPLAY to display a list. In this list the first column is a check box ( reference to my first field of my internal table).
Some checkboxes are already checked. The user can select and unselect rows.
In this ALV you can select severals rows with the checkbox.
My question is : how to know which rows have been selected ?
Thanks.
Bertrand

in the user command subroutine of ur function module
call function 'REUSE_ALV_GRID_DISPLAY'
i_callback_userc0mmand = 'USER_COMMAND'.
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
                        P_SELFLD TYPE SLIS_SELFIELD.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data
case p_ucomm.
   when 'SAVE'.
    loop at itab where checkbox = 'X'.
    endloop.
endcase.

ME2N report - ALV- How to get Vendor Name ?

We use the ME2N (Purchasing Documents per Document Number), with the ALV scope of List.
Is it possible to have the <b>Vendor Name</b> in this ALV grid ?
The name is not offered in the COLUMN SET when pressing the "CHANGE LAYOUT" button.
Thanks

You are correct there is no vendor name available in the ALV grid for
ME2N. This is the way ME2N is presented in the standard with ALV. To
be able to view the vendor name you must use the classic view,
alternatively your Basis people could create a copy of ME2N and include
the field vendor name.
Regards,
Sunitha

How to get sum for each currency's in ALV Report

Hi,
A column has amounts with various currency's.
May I know how to get sum quantity for each currency in ALV Report?
Thanks in advance.

Hi,
Currency value column should have reference to currency code column.
Regards,
Wojciech

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

How to make a row as selected in output internal table in oops ALV

Hi All,
I have ALV grid output using oops ALV concept, in my output i have a checkbox as first column when i select this checkbox and press a push button 'Print' which is there above ALV grid that particular line in output table should get selected and i need to code some logic for printing selected row.
how to make the particluar row in the output internal table to be selected and where to write the logic for print once it is pressed?
Thanks in advance
Srilakshmi.

but the checkbox is not getting set in internal table when i select some checkboxes.
can anybody explain y the checkbox in internal table not set?
Hi Srilakshmi,
As explained by Uwe, when we change a field ( say check box ) in ALV grid, the view (frontend) changes (showing the tick mark) but the changed data ( normally ) is not transfered to the backend.
We can initiate this data transfer by just registering the cl_gui_alv_grid=>mc_evt_modified edit event
go_grid->set_table_for_first_display( CHANGING it_fieldcatalog      = pt_fieldcat
                                                  it_outtab            = pt_outtab ).
go_grid->set_ready_for_input( 1 ).
go_grid->register_edit_event( EXPORTING i_event_id = cl_gui_alv_grid=>mc_evt_modified ). " This does the trick
Now as soon as we check a checkbox, the data_changed event is triggered.
This initiates data transfer to the backend and the checkbox field in internal table is updated.
check the below code for example.
DATA: go_cont            TYPE REF TO cl_gui_custom_container,
      go_grid            TYPE REF TO cl_gui_alv_grid,
      gt_fieldcat        TYPE lvc_t_fcat,
      gv_language        TYPE spras VALUE 'E',
      gt_outtab          TYPE TABLE OF bus_loca_demo WITH HEADER LINE.
START-OF-SELECTION.
CALL SCREEN 100.
*       MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
SET PF-STATUS 'BASIC'.
SET TITLEBAR '001'.
PERFORM create_and_init_alv CHANGING gt_outtab[]
                                       gt_fieldcat.
ENDMODULE.                    "pbo OUTPUT
*       MODULE PAI INPUT                                              *
MODULE pai INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'PRINT'.
      BREAK-POINT.
ENDCASE.
ENDMODULE.                    "pai INPUT
FORM create_and_init_alv CHANGING pt_outtab LIKE gt_outtab[]
                                  pt_fieldcat TYPE lvc_t_fcat.
CHECK go_cont IS NOT BOUND.
CREATE OBJECT go_cont
    EXPORTING
      container_name = 'CUSTOM'.
CREATE OBJECT go_grid
    EXPORTING
      i_parent = go_cont.
PERFORM build_display_table.
PERFORM build_fieldcat CHANGING pt_fieldcat.
go_grid->set_table_for_first_display( CHANGING it_fieldcatalog      = pt_fieldcat
                                                  it_outtab            = pt_outtab ).
go_grid->set_ready_for_input( 1 ).
go_grid->register_edit_event( EXPORTING i_event_id = cl_gui_alv_grid=>mc_evt_modified ). " This does the trick
ENDFORM.                               "CREATE_AND_INIT_ALV
FORM build_display_table.
FREE gt_outtab.
DO 10 TIMES.
    gt_outtab-creation_partner = sy-index.
    gt_outtab-date_field       = sy-datum.
    APPEND gt_outtab.
ENDDO.
ENDFORM.                               "build_display_table
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'BUS_LOCA_DEMO'
    CHANGING
      ct_fieldcat      = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
    CASE ls_fcat-fieldname.
      WHEN 'CHECKBOX'.
        ls_fcat-checkbox = 'X'.
        ls_fcat-edit     = abap_true.
        MODIFY pt_fieldcat FROM ls_fcat.
      WHEN 'ENTER_FIELD' OR 'DBLCLICK_FIELD'.
        ls_fcat-no_out = abap_true.
        MODIFY pt_fieldcat FROM ls_fcat.
    ENDCASE.
ENDLOOP.
ENDFORM.                               "build_fieldcat
Cheers,
Jose.

How do I define Field-Catalog and Event-Catalog in OOPs ALV

Hi All,
This is the piece of the code on which I'm working upon. This program is giving an exception "No Field-Catalog Found".
I'm new to OOPs ALV. Could anybody please tell me how to define the field-catalog and event-catalog in this.
module PBO output.
      IF g_custom_container IS INITIAL.
          CREATE OBJECT g_custom_container EXPORTING CONTAINER_NAME = 'CCCONTAINER'.
          CREATE OBJECT g_grid             EXPORTING I_PARENT       = g_custom_container.
      CALL METHOD g_grid->set_table_for_first_display
          EXPORTING I_STRUCTURE_NAME = 'IT_MATERIAL'
                    is_layout = layout
          CHANGING IT_OUTTAB         = gt_it_material.
      ENDIF.
endmodule.
Regards,
Saurabh

hi,
chk this sampl ceode.
TYPE-POOLS: slis.
CLASS lcl_event_receiver DEFINITION DEFERRED.
TABLES : zmpets_shipactiv, zmpets_chargebk, zmpets_shiphdr.
DATA : BEGIN OF int_crb OCCURS 0,
       sel TYPE char1,
       icon TYPE icon_d,
       pernr LIKE zmpets_cil-pernr,
       vorna LIKE pa0002-vorna,
       movreason LIKE zmpets_shiphdr-movreason,
       shipdocnum LIKE zmpets_chargebk-shipdocnum,
       createdon LIKE zmpets_chargebk-createdon,
       chargeamount LIKE zmpets_chargebk-chargeamount,
       version LIKE zmpets_shipactiv-version,
       activity LIKE zmpets_shipactiv-activity,
       vendor LIKE zmpets_shiphdr-vendor,
      smtp_addr LIKE adr6-smtp_addr,
       empperid LIKE zmpets_167doc-empperid,
       celltab TYPE lvc_t_styl,
       END OF int_crb.
DATA : int_crb_ver LIKE int_crb OCCURS 0 WITH HEADER LINE.
DATA : int_crb_mail LIKE int_crb OCCURS 0 WITH HEADER LINE.
DATA : int_shipactiv LIKE zmpets_shipactiv OCCURS 0 WITH HEADER LINE.
DATA: gt_fieldcatalog TYPE lvc_t_fcat.
DATA : wf_flag TYPE i.
DATA : wf_res TYPE c.
DATA : wf_tabix TYPE sy-tabix.
DATA: BEGIN OF int_sin OCCURS 0,
      shipdocnum LIKE zmpets_chargebk-shipdocnum,
        shipdocnum LIKE zmpets_shipactiv-petsdocnumber,
      END OF int_sin.
DATA: objpack   LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead   LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objtxt    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist   LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA l_num(3).
DATA: ok_code            LIKE          sy-ucomm,
      w_repid            LIKE          sy-repid,
      wl_sno             TYPE          i         VALUE 0,
      w_max              TYPE          i         VALUE 100,
      wf_layout          TYPE          lvc_s_layo,
      cont_on_main       TYPE          scrfname   VALUE 'GRID_CONTROL',
      cont_on_dialog     TYPE          scrfname   VALUE 'GRID_CONTROL',
      grid1              TYPE          REF TO cl_gui_alv_grid,
      grid2              TYPE          REF TO cl_gui_alv_grid,
      custom_container1 TYPE          REF TO cl_gui_custom_container,
      custom_container2 TYPE          REF TO cl_gui_custom_container,
      event_receiver     TYPE          REF TO lcl_event_receiver,
      lt_exclude         TYPE          ui_functions,
      ls_celltab         TYPE          lvc_s_styl,
      lt_celltab         TYPE          lvc_t_styl.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-001.
PARAMETERS : p_cash AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK b3.
PERFORM fieldcatalog_init USING gt_fieldcatalog[].
Selection-Screen----
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
SELECT-OPTIONS:s_chdate FOR zmpets_chargebk-createdon,
               s_pernr FOR zmpets_shiphdr-pernr,
               s_mvrsn FOR zmpets_shiphdr-movreason,
               s_sin FOR zmpets_chargebk-shipdocnum NO INTERVALS
NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM f_clear_fields.
CALL SCREEN 100.
      CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
    handle_toolbar
        FOR EVENT toolbar OF cl_gui_alv_grid
            IMPORTING e_object e_interactive,
    handle_user_command
        FOR EVENT user_command OF cl_gui_alv_grid
            IMPORTING e_ucomm.
PRIVATE SECTION.
ENDCLASS.                    "lcl_event_receiver DEFINITION
      CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
§ 2.In event handler method for event TOOLBAR: Append own functions
by using event parameter E_OBJECT.
    DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
    CLEAR ls_toolbar.
    MOVE 3 TO ls_toolbar-butn_type.
    APPEND ls_toolbar TO e_object->mt_toolbar.
    CLEAR ls_toolbar.
new button -
    MOVE 'PROCESSED' TO ls_toolbar-function.
    MOVE icon_execute_object TO ls_toolbar-icon.
    MOVE 'Process the Record'(110) TO ls_toolbar-quickinfo.
    MOVE ' Process '(200) TO ls_toolbar-text.
    MOVE ' ' TO ls_toolbar-disabled.
    APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.                    "handle_toolbar
METHOD handle_user_command.
§ 3.In event handler method for event USER_COMMAND: Query your
function codes defined in step 2 and react accordingly.
    DATA: lt_rows TYPE lvc_t_row.
    CASE e_ucomm.
      WHEN 'PROCESSED'.
        CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
                 EXPORTING
                  defaultoption        = 'N'
textline1     = 'Do you want to process the selected documents?'
          TEXTLINE2            = ' '
                   titel                = 'Process Documents'
          START_COLUMN         = 25
          START_ROW            = 6
          CANCEL_DISPLAY       = 'X'
                IMPORTING
                  answer               = wf_res.
*--IF THE USER CONFIRMS 'YES',
        IF wf_res = 'J'.
          PERFORM f_modify_activity.
          CALL METHOD grid1->refresh_table_display.
       PERFORM SENDINGMAIL.
        ENDIF.
    ENDCASE.
ENDMETHOD.                           "handle_user_command
ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION
MODULE pbo_100 OUTPUT
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
w_repid = sy-repid.
IF custom_container1 IS INITIAL.
*get the data from charge back table
    PERFORM select_table_chb.
create a custom container control for our ALV Control
    CREATE OBJECT custom_container1
        EXPORTING
            container_name = cont_on_main
        EXCEPTIONS
            cntl_error = 1
            cntl_system_error = 2
            create_error = 3
            lifetime_error = 4
            lifetime_dynpro_dynpro_link = 5.
    IF sy-subrc NE 0.
add your handling, for example
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = w_repid
          txt2 = sy-subrc
          txt1 = 'The control could not be created'(510).
    ENDIF.
    CREATE OBJECT grid1
              EXPORTING i_parent = custom_container1.
Set a titlebar for the grid control
    wf_layout-grid_title = 'Charge Back'(100).
allow to select multiple lines
    wf_layout-sel_mode = 'C'.
    wf_layout-stylefname = 'CELLTAB'.
Exclude all edit functions in this example since we do not need them:
    PERFORM exclude_tb_functions CHANGING lt_exclude.
    CALL METHOD grid1->set_table_for_first_display
               EXPORTING
            I_BUFFER_ACTIVE               =
            I_CONSISTENCY_CHECK           =
            I_STRUCTURE_NAME              =
            IS_VARIANT                    =
            I_SAVE                        =
            I_DEFAULT                     = 'X'
                 is_layout                     = wf_layout
            IS_PRINT                      =
            IT_SPECIAL_GROUPS             =
              it_toolbar_excluding          = lt_exclude
            IT_HYPERLINK                  =
            IT_ALV_GRAPHICS               =
          CHANGING
            it_outtab                     = int_crb[]
            it_fieldcatalog               = gt_fieldcatalog.
    CREATE OBJECT event_receiver.
    SET HANDLER event_receiver->handle_user_command FOR grid1.
    SET HANDLER event_receiver->handle_toolbar FOR grid1.
    CALL METHOD grid1->set_toolbar_interactive.
ENDIF.                               "IF grid1 IS INITIAL
CALL METHOD cl_gui_control=>set_focus
    EXPORTING
      control = grid1.
ENDMODULE.                    "pbo_100 OUTPUT
MODULE pai_100 INPUT
MODULE pai_100 INPUT.
CASE ok_code.
    WHEN 'EXIT'.
      PERFORM f_clear_fields.
      LEAVE PROGRAM.
    WHEN 'CANCEL'.
      PERFORM f_clear_fields.
      LEAVE TO SCREEN 0.
    WHEN 'BACK'.
      PERFORM f_clear_fields.
      LEAVE TO SCREEN 0.
ENDCASE.
CLEAR ok_code.
ENDMODULE.                    "pai_100 INPUT
**&      Form select_table_chb
      text
FORM select_table_chb.
IF p_cash = 'X'.
*Consider the pending documents also.
*get the documents which are not processed yet,
*Doctype -> 06 = Charge Back document type.
    SELECT zmpets_shiphdrpernr pa0002vorna
     zmpets_shiphdrmovreason zmpets_chargebkshipdocnum
     zmpets_chargebkcreatedon zmpets_chargebkchargeamount
     zmpets_shipactivversion zmpets_shipactivactivity
zmpets_shiphdr~vendor
   adr6~smtp_addr
zmpets_167doc~empperid
             INTO CORRESPONDING FIELDS OF TABLE int_crb_ver
             FROM zmpets_chargebk
             JOIN zmpets_shiphdr
           ON zmpets_chargebkshipdocnum = zmpets_shiphdrshipdocno
             JOIN zmpets_shipactiv
     ON zmpets_chargebkshipdocnum = zmpets_shipactivpetsdocnumber
             JOIN pa0002
             ON zmpets_shiphdrpernr = pa0002pernr
                JOIN lfa1
                ON lfa1lifnr = zmpets_shiphdrvendor
                JOIN adr6
                ON adr6addrnumber = lfa1adrnr
             JOIN zmpets_167doc
             ON zmpets_167docpernr = pa0002pernr
                       WHERE zmpets_shipactiv~doctype = '06'
                    zmpets_shipactiv~activity NE '30'
                  ZMPETS_CHARGEBK~CREATEDON IN s_chdate
                  AND ZMPETS_SHIPHDR~pernr IN s_pernr
                  AND ZMPETS_SHIPHDR~MOVREASON IN s_mvrsn
                  AND ZMPETS_CHARGEBK~SHIPDOCNUM IN s_sin
                       AND zmpets_chargebk~loekz NE 'X'
                       AND zmpets_shipactiv~loekz NE 'X'
                       AND zmpets_shiphdr~loekz NE 'X'.
    IF sy-subrc <> 0.
*Message is 'No Pending Documents Available.'.
      MESSAGE s196(zm050).
    ELSE.
      LOOP AT int_crb_ver.
*Not yet processed. set to red
        int_crb_ver-icon = '@0A@'.
        MODIFY int_crb_ver.
      ENDLOOP.
      PERFORM f_filter_data_pending.
    ENDIF.
ELSE.
*Get the document details from pa0002,zmpets_shipactiv,ZMPETS_CHARGEBK
*table.
*Consider document type as '01' during the selection.
*Doctype -> 06 = Charge Back document type.
    SELECT zmpets_shiphdrpernr pa0002vorna zmpets_shiphdr~movreason
    zmpets_chargebkshipdocnum zmpets_chargebkcreatedon
zmpets_chargebkchargeamount zmpets_shipactivversion
zmpets_shipactivactivity zmpets_shiphdrvendor
*adr6~smtp_addr
zmpets_167doc~empperid
             INTO CORRESPONDING FIELDS OF TABLE int_crb_ver
             FROM zmpets_chargebk
             JOIN zmpets_shiphdr
             ON zmpets_chargebkshipdocnum = zmpets_shiphdrshipdocno
             JOIN zmpets_shipactiv
       ON zmpets_chargebkshipdocnum = zmpets_shipactivpetsdocnumber
             JOIN pa0002
             ON zmpets_shiphdrpernr = pa0002pernr
            JOIN lfa1
                ON lfa1lifnr = zmpets_shiphdrvendor
                JOIN adr6
                ON adr6addrnumber = lfa1adrnr
                 JOIN zmpets_167doc
                 ON zmpets_167docpernr = pa0002pernr
                       WHERE zmpets_chargebk~createdon IN s_chdate
                       AND zmpets_shiphdr~pernr IN s_pernr
                       AND zmpets_shiphdr~movreason IN s_mvrsn
                       AND zmpets_chargebk~shipdocnum IN s_sin
                      AND zmpets_shipactiv~activity NE '30'
                       AND zmpets_shipactiv~doctype = '06'
                       AND zmpets_chargebk~loekz NE 'X'
                       AND zmpets_shipactiv~loekz NE 'X'
                       AND zmpets_shiphdr~loekz NE 'X'.
    IF sy-subrc <> 0.
*Message is 'No Charge Back Documents Available.'.
      MESSAGE s201(zm050).
    ELSE.
      PERFORM f_filter_data.
    ENDIF.
ENDIF.
ENDFORM.                    "select_table_chb
*&      Form UPDATE_RECORDS
      text
--> p1        text
<-- p2        text
FORM update_records TABLES p_et_index_rows
                                STRUCTURE lvc_s_row.
DATA: ls_selected_line LIKE lvc_s_row,
          lf_row_index TYPE lvc_index.
LOOP AT p_et_index_rows INTO ls_selected_line.
    lf_row_index = ls_selected_line-index.
ENDLOOP.
ENDFORM.                    " UPDATE_RECORDS
**&      Form fieldcatalog_init
      text
     -->P_GT_FIELDCATALOG[] text
FORM fieldcatalog_init USING lt_fieldcatalog TYPE lvc_t_fcat.
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'SEL'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-datatype = 'C'.
ls_fieldcatalog-col_pos = 1.
ls_fieldcatalog-edit     = 'X'.
ls_fieldcatalog-reptext = 'Select for Processing'.
ls_fieldcatalog-coltext = 'Select for Processing'.
ls_fieldcatalog-seltext = 'Select for Processing'.
ls_fieldcatalog-tooltip = 'Select for Processing'.
ls_fieldcatalog-checkbox = 'X'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'ICON'.
ls_fieldcatalog-tabname   = 'INT_CRB'.
ls_fieldcatalog-datatype = 'CHAR'.
ls_fieldcatalog-col_pos    = 2.
ls_fieldcatalog-intlen     = '4'.
ls_fieldcatalog-reptext   = 'Status'.
ls_fieldcatalog-coltext   = 'Status'.
ls_fieldcatalog-seltext   = 'Status'.
ls_fieldcatalog-tooltip   = 'Status'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'PERNR'.
ls_fieldcatalog-tabname   = 'INT_CRB'.
ls_fieldcatalog-datatype = 'NUMC'.
ls_fieldcatalog-col_pos   = 2.
ls_fieldcatalog-intlen    = '8'.
ls_fieldcatalog-reptext   = 'Employee Number'.
ls_fieldcatalog-coltext   = 'Employee Number'.
ls_fieldcatalog-seltext   = 'Employee Number'.
ls_fieldcatalog-tooltip   = 'Employee Number'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'VORNA'.
ls_fieldcatalog-tabname    = 'INT_CRB'.
ls_fieldcatalog-col_pos    = 3 .
ls_fieldcatalog-datatype   = 'CHAR'.
ls_fieldcatalog-outputlen      = '20'.
ls_fieldcatalog-reptext    = 'Employee Name'.
ls_fieldcatalog-coltext    = 'Employee Name'.
ls_fieldcatalog-seltext    = 'Employee Name'.
ls_fieldcatalog-tooltip    = 'Employee Name'.
ls_fieldcatalog-key      = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'MOVREASON'.
ls_fieldcatalog-tabname    = 'INT_CRB'.
ls_fieldcatalog-col_pos    = 4.
ls_fieldcatalog-datatype   = 'NUMC'.
ls_fieldcatalog-outputlen = '10'.
ls_fieldcatalog-reptext    = 'Move Reason'.
ls_fieldcatalog-coltext    = 'Move Reason'.
ls_fieldcatalog-seltext    = 'Move Reason'.
ls_fieldcatalog-tooltip    = 'Move Reason'.
ls_fieldcatalog-key      = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'SHIPDOCNUM'.
ls_fieldcatalog-tabname   = 'INT_CRB'.
ls_fieldcatalog-datatype = 'NUMC'.
ls_fieldcatalog-outputlen = '10'.
ls_fieldcatalog-col_pos   = 5.
ls_fieldcatalog-reptext   = 'Shipping Document Number'.
ls_fieldcatalog-coltext   = 'Shipping Document Number'.
ls_fieldcatalog-seltext   = 'Shipping Document Number'.
ls_fieldcatalog-tooltip   = 'Shipping Document Number'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'CREATEDON'.
ls_fieldcatalog-tabname   = 'INT_CRB'.
ls_fieldcatalog-col_pos   = 6.
ls_fieldcatalog-datatype = 'DATS'.
ls_fieldcatalog-outputlen = '8'.
ls_fieldcatalog-reptext   = 'Created On'.
ls_fieldcatalog-coltext   = 'Created On'.
ls_fieldcatalog-seltext   = 'Created On'.
ls_fieldcatalog-tooltip   = 'Created On'.
ls_fieldcatalog-DO_sum      = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'CHARGEAMOUNT'.
ls_fieldcatalog-tabname   = 'INT_CRB'.
ls_fieldcatalog-col_pos   = 7.
ls_fieldcatalog-datatype = 'CURR'.
ls_fieldcatalog-outputlen = '13'.
ls_fieldcatalog-reptext   = 'Charge Back Amount'.
ls_fieldcatalog-coltext   = 'Charge Back Amount'.
ls_fieldcatalog-seltext   = 'Charge Back Amount'.
ls_fieldcatalog-tooltip   = 'Charge Back Amount'.
ls_fieldcatalog-DO_sum      = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ENDFORM.                    "fieldcatalog_init
*&      Form f_modify_activity
Modify the activity to 79 in zmpets_shipaciv table.
--> p1        text
<-- p2        text
FORM f_modify_activity .
REFRESH int_crb_mail.
int_crb_mail[] = int_crb[].
*All the document number which is to be processed is stored in
*the internel table 'INT_SIN'.
LOOP AT int_crb INTO int_crb.
    IF int_crb-sel ='X'.
      MOVE int_crb-shipdocnum TO int_sin.
      APPEND int_sin.
      CLEAR int_sin.
*Removing the processed documents.
      DELETE int_crb.
    ENDIF.
    CLEAR int_crb.
ENDLOOP.
*Get the details from shipactiv table.
IF int_sin[] IS NOT INITIAL.
    SELECT * FROM zmpets_shipactiv
        INTO TABLE int_shipactiv
          FOR ALL ENTRIES IN int_sin
                WHERE petsdocnumber = int_sin-shipdocnum.
*Modify the activity code, version, actual date and last changed date.
    SORT int_shipactiv BY petsdocnumber version DESCENDING.
    CLEAR wf_tabix.
    LOOP AT int_shipactiv.
      wf_tabix = sy-tabix.
      AT NEW petsdocnumber.
        READ TABLE int_shipactiv INDEX wf_tabix.
        int_shipactiv-activity = '030'.
        int_shipactiv-version = int_shipactiv-version + 1.
        int_shipactiv-actdate = sy-datum.
        int_shipactiv-lastchangedby = sy-uname.
        int_shipactiv-lastchangedt = sy-datum.
*Modify the data base table
        MODIFY zmpets_shipactiv FROM int_shipactiv.
      ENDAT.
      CLEAR int_shipactiv.
      AT LAST.
*Message is 'Data Processed Successfully.'.
        MESSAGE s203(zm050).
      ENDAT.
    ENDLOOP.
*-send mail to the vendor and employee that the shipment is cleared for
    LOOP AT int_crb_mail WHERE sel = 'X'.
      PERFORM f_send_mail.
    ENDLOOP.
    REFRESH int_crb_mail.
   CALL SELECTION-SCREEN 1000.
ELSE.
*Message is 'No Data Selected for Processing.'.
    MESSAGE s200(zm050).
ENDIF.
ENDFORM.                    " f_modify_activity
*&      Form f_clear_fields
      text
--> p1        text
<-- p2        text
FORM f_clear_fields .
CLEAR int_crb.
CLEAR int_crb_ver.
CLEAR int_sin.
REFRESH int_crb.
REFRESH int_crb_ver.
REFRESH int_sin.
CLEAR int_shipactiv.
REFRESH int_shipactiv.
CLEAR wf_flag.
CLEAR wf_tabix.
ENDFORM.                    " f_clear_fields
*&      Form f_filter_data
      text
--> p1        text
<-- p2        text
FORM f_filter_data .
*Take the latest Version Data.
*take all the activities, including the activity '30'.
then put the details in internal table 'INT_CRB'.
SORT int_crb_ver BY shipdocnum version DESCENDING.
CLEAR wf_tabix.
CLEAR int_crb.
REFRESH int_crb.
LOOP AT int_crb_ver.
    wf_tabix = sy-tabix.
    AT NEW shipdocnum.
      READ TABLE int_crb_ver INDEX wf_tabix.
      MOVE-CORRESPONDING int_crb_ver TO int_crb.
      APPEND int_crb.
      CLEAR int_crb.
    ENDAT.
ENDLOOP.
IF int_crb[] IS INITIAL.
*Message is 'No Records Available.'.
    MESSAGE s202(zm050).
ELSE.
    CLEAR wf_tabix.
    LOOP AT int_crb.
      wf_tabix = sy-tabix.
      REFRESH lt_celltab.
      ls_celltab-fieldname = 'SEL'.
      IF int_crb-activity = '030'.
        ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
*status becomes green. ie processed
        int_crb-icon = '@08@'. "Green
      ELSE.
        ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
*status set to red. ie not yet processed
        int_crb-icon = '@0A@'. "Red
      ENDIF.
      INSERT ls_celltab INTO TABLE lt_celltab.
      INSERT LINES OF lt_celltab INTO TABLE int_crb-celltab.
      MODIFY int_crb INDEX wf_tabix.
    ENDLOOP.
ENDIF.
ENDFORM.                    " f_filter_data
*&      Form f_filter_data
      text
--> p1        text
<-- p2        text
FORM f_filter_data_pending.
*Take the latest Version Data.
*take all the activities, including the activity '30'.
*then filter it with out the activities '30' and having the lastest
*version. then put the details in internal table 'INT_CRB'.
SORT int_crb_ver BY shipdocnum version DESCENDING.
CLEAR wf_tabix.
CLEAR int_crb.
REFRESH int_crb.
LOOP AT int_crb_ver.
    wf_tabix = sy-tabix.
    AT NEW shipdocnum.
      READ TABLE int_crb_ver INDEX wf_tabix.
      IF int_crb_ver-activity NE '030'.
        MOVE-CORRESPONDING int_crb_ver TO int_crb.
        APPEND int_crb.
        CLEAR int_crb.
      ENDIF.
    ENDAT.
ENDLOOP.
IF int_crb[] IS INITIAL.
*Message is 'No Records Available.'.
    MESSAGE s202(zm050).
ENDIF.
ENDFORM.                    " f_filter_data_pending
*&      Form EXCLUDE_TB_FUNCTIONS
      text
     <--P_LT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_cut.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste_new_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
APPEND ls_exclude TO pt_exclude.
ENDFORM.                               " EXCLUDE_TB_FUNCTIONS
*&      Form f_send_mail
      text
--> p1        text
<-- p2        text
FORM f_send_mail .
*store the vendor name, vendor email id , employee name and employee
*email id in the internal table int_crb
Creation of the document to be sent
CLEAR doc_chng.
REFRESH objpack.
REFRESH objhead.
REFRESH reclist.
REFRESH objtxt.
File Name
doc_chng-obj_name = 'SHIPMENT'.
Mail Subject
CONCATENATE 'Shipment Document No.' int_crb_mail-shipdocnum
'Cleared.'
INTO doc_chng-obj_descr SEPARATED BY ' '.
Mail Contents
objtxt-line = 'Hi,'.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CONCATENATE 'Shipment Document Number ' int_crb_mail-shipdocnum
' cleared for move.' INTO objtxt-line SEPARATED BY ' '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CLEAR objtxt.
objtxt-line = 'Regards '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
objtxt-line = 'SAP '.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN(
objtxt ).
Creation of the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
Completing the recipient list
target recipent
CLEAR reclist.
reclist-receiver = int_crb_mail-empperid. "employee email ID
"wf_empperid.
reclist-express = 'X'.
reclist-rec_type = 'U'.
APPEND reclist.
copy recipents
CLEAR reclist.
reclist-receiver = 'anversha.shahul@'."int_crb_mail-smtp_addr
reclist-express = 'X'.
reclist-rec_type = 'U'.
reclist-copy     = 'X'.
APPEND reclist.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = doc_chng
    TABLES
      packing_list               = objpack
      object_header              = objhead
   contents_bin               = objbin
      contents_txt               = objtxt
      receivers                  = reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
COMMIT WORK.
SUBMIT rsconn01
                WITH mode = 'INT'
                WITH output = ' '
                  AND RETURN.
ENDFORM.                    " f_send_mail
rgds
anver
pls mark hlpful answers

How to get the latest ALV record?

Hi all,
I have create a ALV in my module pool with delete row feature. The module pool is able to display the record into the ALV.
The user needs to delete some of the unwanted records. After that, my program needs to populate the record (after deleted rows), and save it into a customized table.
My question is, how can I get the most up-to-date record from the ALV and assign it into internal table?
Thanks in advance.

Hi,
Yes, I am using OOPs ALV
I have included this code into PAI, but how do I get it assigns to a internal table?
data: lv_valid type c,
      lv_refresh type c.
call method grid1->check_changed_data
importing
    e_valid = lv_valid
changing
    c_refresh = lv_refresh.
PBO
data grid1 type ref to cl_gui_alv_grid.
call method grid1->set_table_for_first_display
    exporting
      i_structure_name     = 'ZSTRUCTURE_EXCEL'
      it_toolbar_excluding = lt_exclude
      is_layout            = ls_layout
    changing
      it_outtab            = gt_export2excel.
FYI, my ALV is with delete row feature, the user will delete some of the row and now I need to get the remaining row and assign it to an internal table.
Please help with some sample code. Thanks.

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

How to get total in ALV report in same Internal table?

Data : Begin of it_data,
        kunnr type kunnr,
        name1 type name1,
        amt1 type btrt01, " CURR 15,2
       end of it_data.
loop at it_data into wa_data
endloop.
Hello friends,
I am developing one ALV report with 20 rows.
I have filled one internal table with some fileds like amount.
I want to get total of all amount1 in AMT1 field.
So, How to get total of amount in same internal table in ALV report ?
It is ok if i get duplicate rows in internal table.
Points 'll be awarded soon.
Regards,
NVM

Hi Ronny,
the alv output will display the sum at the last row.
for this functionality u have do this logic.
data: lw_fcat type slis_fieldcat_alv.
data: lt_fcat type slis_t_fieldcat_alv/
wa_fcat-fieldname = 'AMT1'.
wa_fcat-tabname = 'ITAB'.
wa_fcat-do_sum = 'X'.
append wa_fcat to lt_fcat.
and then pass it to reuse_alv_grid_display function,
regards,
Santosh Thorat

How to get the actual data in ALV report

I am doing some upgradation work in that i am using Submit & And return and also i am using some function modules like LIST FROM MEMORY , LIST TO TXT wnd WRITE LIST , it gives output in normal list format , But i need to print in ALV report .
With the use of set table for 1st display i got the ALV report but not with actual data, (some junk value is showing) , So can any 1 suggest me how to get the actual data in ALV report, With the use of Any Function Module or with Coding,
with regards,

Hi Saravana
I am sure you must be getting the values in tables of table parameters from every FM.
consolidate the values from tables of all FMs in one table and built ALV for that table only.
I hope this way you can show the actual data in ALV.
thanks
Lalit

How to raise error message from PAI of oops ALV report

Hi All,
I have a requirement to raise error message form editable oops alv . After entering the data and then press SAVE button .
Please help.
Thanks in Advance

HI SK,
Write a Local class (Event Handeler) to handel the events. In Editable ALV once the user enter a value, CL_GUI_ALV_GRID will raise an event called DATA_CHANGED.
1. Define and Implement a local class to handle that event.
In the implementation of this class you need to get data from imported object to an internal table, then compare the same with the ALV output table.
* Local Class to handler the events raised from the ALV Grid
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
* Method to handel EDIT event, DATA_CHANGED of CL_GUI_ALV_GRID
METHODS : ON_DATA_CHANGE FOR EVENT DATA_CHANGED OF CL_GUI_ALV_GRID
                       IMPORTING ER_DATA_CHANGED.
ENDCLASS.
* Event handler class Implementation
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD ON_DATA_CHANGE.
    DATA : LT_MODIFY TYPE LVC_T_MODI,
               LS_MODIFY TYPE LVC_S_MODI.
* Copying changed data into intenal table from Object
    LT_MODIFY = ER_DATA_CHANGED->MT_MOD_CELLS.
* Modifying the ouptut table with the changed values
    IF LT_MODIFY[] IS NOT INITIAL.
          *Compare the ALV Output table with LT_MODIFY
    ENDIF.
ENDMETHOD.
ENDCLASS.
Then raise a message on required condition in the same method.
Note: To trigger the above method, you need to set event handler before displaying ALV (before calling method SET_TABLE_FOR_FIRST_DISPLAY)
* Creating object for the Local event handler class
CREATE OBJECT GR_HANDLER.
* Set handler (call method of Event_handler) to handler Edit event
SET HANDLER GR_HANDLER->ON_DATA_CHANGE FOR GR_GRID.
Regards,
Vijay

How To Get The Total Delivered Quantity of a Sales Order

Hello All,
I have a requirement of getting the total delivery quantity of the sales order .I have checked it in LIps table but I am getting partially delivered quantity for a schedule line item.Can any one tell me how to get the total delivered quantity.
Regards,
Pavani.

Hi
Check the Table:
VBEP - Sales Document: Schedule Line Data.
Inside the table check the Quantity Fields.
Regards,
Sreeram

How to get Item-Code wise stock quantity and value for a previous date

Dear Sir,
As per the government legal requirement , we are required to furnish a list for items having stock as on a date ( date is not the current date but it is some past date) and in the list we need to provide material wise stock quantity and value .
We can generate a list for the current date , but do not know how to get it for a previous date .
We request you to kindly guide us about such a list .
With Thanks and Regards
Sonia Agarwal

hi,
might be this reports will be help full for your requirement.
MMBE
MB53
MB52
MB5M
MB5B
MB5T
MBLB
MBBS
MB54
ME56
Thanking you

In oops-alv how to get quantity.

Similar Messages

Maybe you are looking for