In partial delivery, what does it mean by Create only one delivery (also with qty = 0)?

Hi Expert,
I would like to ask
"Create only one delivery (also with qty = 0)"
It is mentioned in Partial Delivery
The following partial delivery agreements exist:
A Create a delivery with qty greater than zero
B Create only one delivery (also with qty = 0)
C Only complete delivery allowed
D No limit to subsequent deliveries
Please provide example together.
Many thanks.
Rgds,
Ong

Dear Lit Yit Ong
The use of B is Creating only one delivery (also with quantity = 0) Same like as indicator A, only the difference is we can create a delivery with zero qty also.
Regards
venu Gopal reddy

Similar Messages

I plugged my iphone in for the first time to my itunes account and it now reads that this device is already associated with an apple id. what does that mean. i only have one apple id. and do i chose cancel or transfer?

i plugged my iphone in for the first time to my itunes account and it now reads that this device is already associated with an apple id. what does that mean. i only have one apple id. and do i chose cancel or transfer?

Hello there, Shellywms09.
The following Knowledge Base article points out why you are receiving that message on your iPad:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

What does is mean when MacBookPro only charges to 99% instead of 100%?

What does it mean when MacBookPro only charges to 99% instead of 100%?

Perfectly normal behaviour.
http://support.apple.com/kb/TS1909

HT1338 what does it mean when there is one long beep?

What does it mean when there is one long beep?

See this article. By the way, the reason no one responded is because Mac OS X 10.3 and 10.8 are mutually exclusive, and can't run on the same machine.

What does it mean when i have a flashing folder with a question mark in it when i try to boot up?

what does it mean when I have a flashing folder with a question mark in the middle of it when I try to boot the interface?

It means the system cannot find a bootable OS. Reinstall OS X.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

What does it mean if you have a lock symbol with a circle around it on a I phone 4

What does it mean when your I phone 4 has a lock symbol with a circle around it?

It is called "Portrait Lock".
To enable or disable, double tap the home button then swipe right to get to the music controls.
Either a circular arrow or circular arrow with a lock will appear, the lock indicates Portrait Lock is turned on.

What does it mean to create a disk image?

I had an option to "create disk image" of an external drive Im using for back up. What does that actually mean, to create disk image? I mean what is the puropose of it and when do I use this disk image?
Thanks in advance, your all geniuses, or is it genieii!
Message was edited by: tracyryan354

A disk image is basically a file containing other files and folders.
When you double-click it, it mounts, and appears as though it is a CD or external hard drive, allowing you to access the files.
You can encrypt a disk image, if you want, meaning you would have to type a password to access the files that are on it.
Good luck!
Message was edited by: joshz

What does this mean? "This computer is already associated with an apple ID"

I just subscribed to Music Match on my laptop.
Now I am trying to add my main computer that has the majority of my music to Music Match as well but I get an error:
"This computer is already associated with an apple ID"
What does that even mean? Of course it is associated with an apple ID. Isn't the whole point that I can add up to 10 devices under the same ID?
I don't get it.

I set up a call with Apple Support to talk to a live person.
It was a terrible experience but I got it fixed.
Set it up to call me at a specific time.
First call - After explaining about 5 times and transfered the same amount of times, the final person I talked to got very combative and hung up.
Setup another call back and being transfered around 3-4 times, I got to Audrey, who I was told was a "Senior Advisor". All I can say is... it's the support employee I wish I got first. She wasn't with the iTunes team, but chatted them, tried some stuff.
Finally it came down to that there was "another ID" attached to my mac. I have multiple User Accounts on my mac, but they said it shouldn't matter. I had never used another account within iTunes (though my iCloud account is separate, it has never been used in iTunes).
She said they removed that account, and told me to wait 15 minutes. She setup a callback. I waited 15 minutes, and it worked.
Audrey called me back, gave me her email address and callback number in case further issues come up with this.
The first 7-8 people I talked to made me feel like I was calling just about every other support line (and I expect more from Apple), but Audrey, singlehandedly, restored my faith that support means helping the customer (and not simply saying they are sorry over and over without doing a thing).

HT201210 (-1) error what does it mean i didi everything the guide said with no success

error (-1) what does it mean

heisetax,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

What does it mean if i only see the apple sign on my iphone

My iPhone 4 suddenly went blank, and I failed to turn it on even when I press the switch and home button together at the same time, so I tried to charge it instead.
The apple sign appeared but stayed for a long time so I waited and it finally vibrated and lit up with "iOS 6" showing and it said "slide to set up" ...
I don't think I backed up my stuff because I recently got a new laptop... so does that mean everything is lost?

If there's no backup then most of the stuff is gone.
You can re-download if available apps, music and books for free form iTunes/App Store under Purchased.

HT1551 what does it mean when I see a black screen with the Apple logo but it wont do anything but that. I have re booted 4 times same outcome. Help!

I just hooked up my Apple TV. I see a black screen with Apple logo. Nothing else happens. Remote functions as I see the white light respond. Have rebooted 4 times but same thing occurs. What should I try.
Thanks.

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

What does it mean when iPhoto displays a warning sign with an exclamation point when you try to open a photo in your library?

What is iPhoto 11 trying to tell me when it displays a warning sign with an exclamation point in it when I try to open a photo in my library? I'm corrupted file and that since there are many I may have a bad drive. I have 2 time machine backups (one is off site) but its not clear to me if I can restore individual photos or whether it's worth even trying since ther are many.
Any thoughts from people who have experienced this would be much appreciated.

I rebuilt it using iPhoto Manager and that appears to have worked. I did the rebuild onto a different drive and I'm now working to determine if there is a problem the the external drive that held the corrupted library.

What does it mean when you see the battery symbol with red and black and an "lightening" symbol below it

Why doesn't the battery on my new iPhone 4s last very long? I charged it yesterday late afternoon. Did not use it at all and it was completely dead this morning.

All icons are covered in the User's Guide... might be a good idea to browse through it.
Also, a simple search of these forums or google will result in a plethora of information regarding battery life. Help yourself by doing a little research.

HT1329 How do you deauthorize ipods that no longer work or have been stolen. What does it mean that you only have 5 devices that can download your itunes library. How do you deactivte old serial numbers and add new ones as of now we only have one ipod

Over the years we have owned many i-pods. Most of them ran out of juice or were just outdated some even stolen. As of right now I have one i-pod that should be authorized to download music from my library. I plan to get a new one. My question is how do you deactivate all the old i-pods so that i-tunes doesnt think I have all these pods downloading from my personal lbrary of music. If I get a new one and plug it in it will say you are authorized 1 or 2 or whatever it is at this point to download music from this libtary. How to I get rid of all the old devices (serial numbers) that don't draw from my i-tunes library anymore?

Ipods/iphones/ipads/apple tvs are not authorized at all.
Authorization applies ONLY to computers.

I tried to download the latest OSX Mountain Lion and got this notice - "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed. " What does this mean and why can't I download it?

I tried to download the latest OSX for my iMac - Mountain Lion.
This is the message that I received:
"We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
What does this mean?

The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps.

In partial delivery, what does it mean by Create only one delivery (also with qty = 0)?

Similar Messages

Maybe you are looking for