In Payables if invoice is in INR then can u make payment in USD?

Hi Experts,
Can anyone explain me that if u raised the invoice in currency INR then is it possible to make the payment to supplier in USD?
If yes then how and what are the pre-requisites?
Please guide me.
Thanks

Hello.
You cannot pay an invoice in a currency different from the one it has been recorded. The exception goes to currencies where a direct relation exists between them (like EURO and the former EURO currencies like German Mark of French Franc).
Octavio

Similar Messages

In F110 -Customer as a Vendor invoice clear and make payment

Dear all ,
Can we make payment through in F110.
WE maintain Customer as a vendor and Vendor as customer,While running automatic program system
showing error massage"No pymt possible because items with a debit bal"
But over all amount is credit ,But only customer invoice showing like this.
Could you tel me that ,Is there any setting ,Wt setting we have to configured .How to solve this issue
Thanks in advance
Regards
Girish.

Dear all,
Kindly suggest me how to do this.
we have maintained customer as a vendor in different company code
one company code xxxx here we maintained as a customer ,In this
customer master data we maintained vendor no and clearing with vendor we have selected.
In next company code yyyy here we maintained vendor as customer ,here we maintained customer no and selected clearing with vendor.and payment method .
In xxxx company code customer as a vendor balance is 1000.
In another company code yyyy here vendor as customer balance is 15000,
paying company code is yyyy.
while running F110 system asking paying company code and sending companycode,we are entering two times.first time yyyy and second time xxxx.
that time showing error"No pymt possible because items with a debit balance"
Then we edit proposal its working fine ,But its not clear against vendor
invoice
system taking full vendor invoice amount(15000) as a out going payment
and 1000 is incoming payment.
But we want pay only difference amount of the invoice.
For this what we need to do in the system please guide
thanks in advance
Thanks and Regards
Girish

Payables Posted Invoice Register error information (11i)

Just to let people know, I have run across an issue on the Payables Posted Invoice Register report. What I stumbled across is that sometimes a few invoices would not print on the report. If I changed the date range, so that the date was now in the middle of the range, then the invoice data would print. What I finally discovered is that if I have a distribution record with a date/time timestamp value (not just a date only timestamp value) for the TO ACCOUNTING DATE parameter of my report request, the report would not include those records. Further research showed that this only happened on cancelled invoices only, but only some of the time when cancelling (not all of the time). I reported this to Oracle Support. Turns out there is a patch available to fix the cancel invoice program to not put out a date/time timestamp value, and a data fix script to fix your historical data. I have also put in an enhancement request (search for document ID 8585995) to have the Posted Invoice Register report do a SQL TRUNC function. That way even if you do get a time value into the timestamp field (accounting date), the report would still pick up the record. We had this problem for 17 months before stumbling across it, so it may be possible that you have the same problem and are not aware of it either. The number of affected records are small, and would have to be on the TO DATE date value to impact the report as well. Just wanted to let people be aware of this situation.
John Dickey

Hi Gareth,
i am getting the below error in OPP log file.
[11/4/09 8:32:21 PM] [OPPServiceThread0] Post-processing request 19669637.
[11/4/09 8:32:21 PM] [68406:RT19669637] Executing post-processing actions for request 19669637.
[11/4/09 8:32:21 PM] [68406:RT19669637] Starting XML Publisher post-processing action.
[11/4/09 8:32:21 PM] [68406:RT19669637]
Template code: APXPOINV
Template app: SQLAP
Language: en
Territory: US
Output type: RTF
[11/4/09 8:32:29 PM] [UNEXPECTED] [68406:RT19669637] oracle.apps.fnd.cp.util.RemoteFileException: An Error occured during file transmission in the FND File Server: The Applications File Server could not open the file 4268095326 for read.
     at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:242)
     at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:195)
     at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:131)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:224)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[11/4/09 8:32:29 PM] [68406:RT19669637] Completed post-processing actions for request 19669637.
Could you please help me to understand this error message?
Many Thanks,
S

Need interface tables in payables for invoices of type prepayment

hi all i am doing conversion in payables for invoices of type prepayments
the table which i am using are
AP_INVOICES_INTERFACE
AP_INVOICE_LINES_INTERFACE
can any one help me by giving correct interface tables

Hi,
As far as I know, you can't import prepayments through AP Open Interface: it only supports importing invoice types 'STANDARD' and 'CREDIT'. One alternative would be importing them as standard invoices and, after loading them into AP, change invoice_type_lookup_code to PREPAYMENT.
Hope it helps,
Ketter Ohnes

Accounts Payable API Invoice Creation API

Hello All,
Is there any API available in R12 for creating Accounts Payable(AP) Invoices.
Thanx in Advance.
Regards,
Deepak Arora
+91-96500-28672

Hi;
All APIs are listed in Oracle Integration Repository
http://irep.oracle.com/index.html
API User Notes - HTML Format [ID 236937.1]
R12.0.[3-4] : Oracle Install Base Api / Open Interface Setup Test [ID 427566.1]
Pelase also check below:
Api's in EBS
Re: Api's in EBS
http://sairamgoudmalla.blogspot.com/2009/05/script-to-find-oracle-apis-for-any.html
API
Fixed Asset API
List of API
Re: List of APIs
Oracle Common Application Components API Reference Guide
download.oracle.com/docs/cd/B25284_01/current/acrobat/jta115api.pdf
Regard
Helios

HT203167 i have purchased 100 songs in last 2 years on itunes now i am able to find the first 50 songs i am using the original id in all my devices.i even got the invoice of my purchase where can find them all?

i have purchased 100 songs in last 2 years on itunes now i am able to find the first 50 songs, i am using the origial id in all my devices.i even got the invoice of my purshace where can find them all?
ITS NOT EVEN SHOWING UP IN PURCHASED SECTION

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect?

When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect.

Yes you certainly can.
Right click any desktop in the list > Settings > in the left pane select the desktop you want to auto connect to > check "Auto connect to this desktop".

Xserve Services are accessible for a moment and then can't access

I have new Intel Xserve. Set up as a gateway, open directory master, web server, etc. Ethernet 1 connects to the wan and Ethernet 2 connects to a new Airport Extreme. The client machines are Macbooks. The Xserve is set up to be the dhcp server. The Airport is a bridge.
Everything was working fine until last week. Here is what is happening: The Macbooks can use the services that the Xserve provides for a short while, ie they can browse the Xserve's websites, browse internet websites and authenticate with open directory. Then after a short while they can't. For instance attempting to get to www.apple.com with the Macbook will result in a constant "contacting ...." status in Safari. Authentication with Open Directory is no longer possible. Even trying to browse 192.168.2.1 (the Xservers Eth2 IP address) results in "contacting...." and nothing happening. Interestingly I can still ping 192.168.2.1 from the laptop.
To get things working again I've found I can simply make a change to the setting of the ethernet card on the Xserve. For example I might switch it from static ip to dhcp and back. I might change the ethernet from auto to manual and back or whatever. Just make a change to the network settings and apply then change them back and apply. The laptops will be able to access the services again for a short while (maybe a minute or two) and then things get stalled again. They won't be able connect to websites or get access to the internet etc. Again even http://192.168.2.1 won't work. Change something in network settings and change back and it will work for a short while again. Nothing is popping out at me in any logs I'm looking at.
Do I have a hardware problem? At first I assumed DNS perhaps? Since the server is pre-production I erased the harddrives last night and reinstalled OSX Server. Set it up as a gateway and webserver using the apple setup aids and the same thing. Laptops can access the server for a few moments then fail. If I make a change to the networking settings in preferences that seems to reset things for a short time and then it fails again.
I'm stumped, but then again I'm also new at this.
Xserve Mac OS X (10.4.9)

&tWhen the clients keep on showing the "connecting..." screen, that is usually a DNS problem. Do you have the DNS servers correctly listed under DHCP services by the server?
If you can ping your server but cannot access the Internet try the dig command and see if the DNS servers are responding.
;b>dig www.apple.com
The last few lines should contain the IP address of your DNS server like this:
e.g. Covad DNS server
;; Query time: 25 msec
;; SERVER: 64.105.189.26#53(64.105.189.26)
;; MSG SIZE rcvd: 284
If the IP address shown there is not the one for the DNS server, you have configuration problem.

How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red.

Excise Invoice of Captured without PO can't be canceled with J1IEX

Dear all,
I entered the EWPO(Excise Invoice Without PO) from J1IEX transaction with processing mode "A01 Capture Excise
Invoice" and reference document "R06 Without Purchase Order".
But when I cancel it from same transaction, the error below has occurred.
"Excise invoice xxx has already been posted for vendor XXX."
And I couldn't cancel it from J1IS or J1IH transaction, too.
Do you know how to cancel it?
When I asked it to OSS, their answer was as following.
Answer of person in charge 1.
You have to reverse Part 2 with J1IH transaction, and cancel Part 1 with J1I5 transaction.
->(My confirmation result)
    But on the EWPO screen, there are no fields to input the material document number.
    So I couldn't cancel Part 1 portion from J1I5.
Answer of person in charge 2. (escalated from person 1)
You can continue the cancellation from J1IEX with pressing enter key, ignore a message.
->(My confirmation result)
    As that operation result, Excise Invoice "0000000000" was created with status "B" separately.
    But ,, when a new posted EWPO was canceled, the Invoice "0000000000" described above was overwritten.
    This method was not able to be used.
Answer of person in charge 3. (escalated from person 2)
You always have to register a Excise invoice from MIGO transaction.
If you want to receive goods without PO, you can use movement type 501.
And if you register a Excise invoice from J1IEX directly, you can't cancel the EI Part 1.
There are only two ways to cancel the part1
1. By cancelling the material document.
2. By using the J1I5 transaction
The material document is necessary in each case.
The current EWPO function of direct J1IEX is useless.
->(My confirmation result,,,)
    So, what is the EWPO function of below?
   "J1IEX transaction with processing mode "A01 Capture Excise Invoice" and reference document "R06 Without Purchase Order"
Best regards,
Iwana

Dear Padmasri ,
Thank you for your reply.
But,,, as you wrote, that is normal case with PO and GR.
I know that normal process well.
I'm asking about EWPO(Excise Invoice Without PO) case.
As I wrote, EWPO is registered directly from a J1IEX transaction.
(with processing mode "A01 Capture ExciseInvoice" and reference document "R06 Without Purchase Order")
The above-mentioned error occurs the Post mode of J1IEX, or Cancel mode, and cancellation of the Excise Invoice is impossible.
And, since there is no field to input material document number on the screen of J1IEX in that case, a link is not made even GR has posted.
We would like to apply this EWPO to the material which does not manage stocks.
(We would like to deal with only the payment of the expense to a vendor, and the payment of Excise.)
Best regards,
Iwana

Restrict if the excise invoice isn't cancel we can't cancel the billing Doc

HI
How to Restrict if the excise invoice is not cancel we can't cancel the billing Document
I know if the billing document is Cleared we can restrict by using the copy control Requirement in VOFA (29)
Is it possible to Standard SAP ? if Yes how?
Regards,
Prasanna

Dear prasanna_sap,
It is not possible in standard SAP.
You have to go for a development.
Exit RV60AFZZ-USEREXIT_NUMBER_RANGE
Please find the logic
If XVBRP-WERKS = J_1IWRKCUS - J_1IWERKS Pass the XVBUK - VBELN to J_1IEXCHDR u2013 RDOC, If STATUS = R the document should not allow saving (Error message: Excise invoice to be cancelled first), else allow saving.
Please let me know if you have any further clarifications.
Thanks&Regards
Raghu.k

Invoice number and document number not printed in payment advice

Hello Gurus,
I am executing reprint check through transaction fch7, In that Invoice number and document number not printed in payment advice. I have created zscript for that and also assinged regup-belnr and regup-xblnr and used standard program RFFOUS_C.
other fields from regup table are displayed but above two mentioned fields are not displayed.
I even tried debugging standard RFFOUS_C prog, in that regup-belnr and regup-xblnr are coming but it is not printed on form.
With regards,
Vikram

Hi,
Debug you Zscript and check the invoice no and document no. Have assigned that script in FBZP..? check the which form is calling FCH7 in debugger mode..?
Rgds
Aeda.

My iphone application running continuously in background to access some information by "beginBackgroundTaskWithExpirationHandler" then can i submit in appstore .

My iphone application running continuously in background to access some information by "beginBackgroundTaskWithExpirationHandler" then can i submit in appstore ?

This is a question that should probably be posed in the Developer forum.

When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Safari 6.1 freezes and then can't connect to the server when I refresh the page

Hi everyone.
I have a Mid 2010 13" Macbook. It is running the following..
Processor: 2.4 GHz Intel Core 2 Duo
Memory: 4GB 1067 MHz DDR3
Graphics NVIDIA GeForce 320M 256 MB
Software OS X 10.8.5 (12F45)
Hard Drive: 320GB
Recently Safari has been acting up. Everything will be working fine but then it will freeze and when I switch to another tab that tab will be white, as will all other tabs when I switch to them. When I refresh the page it force refreshes all other pages but on a lot of the pages (Facebook, Twitter, google, Gmail, mostly things with a password I think) it says that it can't make a secure connection to the server. I tried switching to Chrome and the same thing happened and then I switched to the Guest User and the same thing happened.
It has also been telling me that I have no more space on the startup disk but I'm not sure how that can be the case. I currently have 272GB free of a 319GB hard drive so I'm not sure what the problem is here! When I restart the mac everything is fine again but I have noticed it is taking longer for the mac to start up now. I have repaired disk permissions, I have reset Safari and cleared the history. I have downloaded OmniDiskSweeper and it has told me that the highest usage is in Spotify caches and my Gmail folder. So I deleted the Spotify caches and deleted all my emails. I then tried to delete the mail folder in Finder but when I do it just builds itself back up again.
When I used Disk Utility to verify the disk it found no issues.
I tried to shut down and restart it to run the hardware test but it doesn't boot up, it just takes a lot longer to reach the log in screen.
I don't know what else to try! Any help would be welcomed.

Try this DNS server ..
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch Safari to test.

In Payables if invoice is in INR then can u make payment in USD?

Similar Messages

Maybe you are looking for