Restrict if the excise invoice isn't cancel we can't cancel the billing Doc

HI
How to Restrict if the excise invoice is not cancel we can't cancel the billing Document
I know if the billing document is Cleared we can restrict by using the copy control Requirement in VOFA (29)
Is it possible to Standard SAP ? if Yes how?
Regards,
Prasanna

Dear prasanna_sap,
It is not possible in standard SAP.
You have to go for a development.
Exit RV60AFZZ-USEREXIT_NUMBER_RANGE
Please find the logic
If XVBRP-WERKS = J_1IWRKCUS - J_1IWERKS Pass the XVBUK - VBELN to J_1IEXCHDR u2013 RDOC, If STATUS = R the document should not allow saving (Error message: Excise invoice to be cancelled first), else allow saving.
Please let me know if you have any further clarifications.
Thanks&Regards
Raghu.k

Similar Messages

  • Cancel the excise invoice in Intra company stock transfer

    Dear Gurus,
    I have one issue in CIN.
    The following are the my sequence of operation.
    Intra company stock transfer.
    1. Purchase order with UB. (from plant A)
    2. Delivery ( from plant B),
    3. PGI ( from plant B),
    4.Excise Invoice ( from plant B to A),
    5. Billing ( from plant B),
    6. Creating Excise Invoice without purchase order Manually (from plant A),
    after PGI and Before MIGO.
    7. MIGO.
    Now i want to cancel the Excise invoice in Plant A.
    how can i cancel the excise invoice.?
    kindly provide the valid information.
    Thanks.
    Best Regards
    Anbu

    In T.Code: J1IIN, there is an option of deleting / cancelling the Excise Invoice. On the top most left hand side (after entering the Excise Invoice number) select Excise Invoice --> Cancel / Delete.
    Here it is possible to cancel the Excise Invoice.
    Regards,
    Rajesh Banka

  • Excise Invoice of Captured without PO can't be canceled with J1IEX

    Dear all,
    I entered the EWPO(Excise Invoice Without PO) from J1IEX transaction with processing mode "A01 Capture Excise
    Invoice" and reference document "R06 Without Purchase Order".
    But when I cancel it from same transaction, the error below has occurred.
    "Excise invoice xxx has already been posted for vendor XXX."
    And I couldn't cancel it from J1IS or J1IH transaction, too.
    Do you know how to cancel it?
    When I asked it to OSS, their answer was as following.
    Answer of person in charge 1.
    You have to reverse Part 2 with J1IH transaction, and cancel Part 1 with J1I5 transaction.
    ->(My confirmation result)
        But on the EWPO screen, there are no fields to input the material document number.
        So I couldn't cancel Part 1 portion from J1I5.
    Answer of person in charge 2.  (escalated from person 1)
    You can continue the cancellation from J1IEX with pressing enter key, ignore a message.
    ->(My confirmation result)
        As that operation result, Excise Invoice "0000000000" was created with status "B" separately.
        But ,, when a new posted EWPO was canceled, the Invoice "0000000000" described above was overwritten.
        This method was not able to be used.
    Answer of person in charge 3.  (escalated from person 2)
    You always have to register a Excise invoice from MIGO transaction.
    If you want to receive goods without PO, you can use movement type 501.
    And if you register a Excise invoice from J1IEX directly, you can't cancel the EI Part 1.
    There are only two ways to cancel the part1
    1. By cancelling the material document.
    2. By using the J1I5 transaction
    The material document is necessary in each case.
    The current EWPO function of direct J1IEX is useless.
    ->(My confirmation result,,,)
        So, what is the EWPO function of below?
       "J1IEX transaction with processing mode "A01 Capture Excise Invoice" and reference document "R06 Without Purchase Order"
    Best regards,
    Iwana

    Dear Padmasri  ,
    Thank you for your reply.
    But,,, as you wrote, that is normal case with PO and GR.
    I know that normal process well.
    I'm asking about EWPO(Excise Invoice Without PO) case.
    As I wrote, EWPO is registered directly from a J1IEX transaction.
    (with processing mode "A01 Capture ExciseInvoice" and reference document "R06 Without Purchase Order")
    The above-mentioned error occurs the Post mode of J1IEX, or Cancel mode, and cancellation of the Excise Invoice is impossible.
    And, since there is no field to input material document number on the screen of J1IEX in that case, a link is not made even GR has posted.
    We would like to apply this EWPO to the material which does not manage stocks.
    (We would like to deal with only the payment of the expense to a vendor, and the payment of Excise.)
    Best regards,
    Iwana

  • Issue in the Excise Invoice

    Hi
    SD GURUS
    The requirement is client want to see the accounting entries of Education Cess and Secondry Cess in the accounting document after processing the J1iiN.
    They are processing the J1iiN document with the excise invoice type as '' NO BOND '' . After clicking the utilization button  while processing in j1iiN the Excise duty, Secondry Cess and Education Cess get disappeared. But in the initial screen after entering the BILLING DOCUMENT, POSTING DATE in J1iiN the Excise duty, Secondry Cess and Education Cess are getting reflected in the appropriate fields.
    If we see the accounting document after processing the J1iiN only the Excise Duty  is getting reflected the remaining Secondry Cess and Education Cess is not getting reflected.
    Kindly Guide me in this.
    ANAND

    It is possible that you may have to apply a SAP Note. I had faced similar issue in one of my assignment and the issue was resolved by applying a  Note.
    I do not remember the note number. It would be great if you could look for SAP Note, alternatively If you raise a SAP OSS message, you are likely to get response with the details of Note number.
    Regards,
    Rajesh Banka

  • In J1IIN the excise invoice type is not getting changed to BOND for Export

    Hi Experts,
    In ECC 6.0 I am trying to create an Excise Invoice (Export) but the system in J1IIN is not allowing me to change Excise invoice type to Bond (deemed is reflecting in Blue), some more details are as follows:
    The Customer is for Country India, the currency is INR, the series group is 20 (export), the sale order is of Export, the customer pricing proc in the customer master is same as what we select for other exports customers.
    I have checked the configuration in IMG---LOGISTICS GENERAL--TAX ON GOODS MOVEMENTS-INDIA---BUSINESS TRANSACTIONS-OUT GOING EXCISE INVOICE---MAINTAIN DEFAULT EXCISE GROUPS AND SERIES GROUPS, the EXPORT column is blank.
    Please advice as to how I will be able to get the export under bond in Excise Invoice type
    Thank you,
    Sagar R K

    Hi Sagar..
    Please note that in order to change the excise invoice type to Bond, System has to meet the below to requirement.
    1. Currency should be foreign ( I mean other than local currency, In case of India currency is INR) OR
    2. Ship to Party should be outside the country.
    By going through your comments, I understand that what ever excise invoice type is reflected in the excise invoice i.e,Deemed is correct only.
    If you want to treat this is as export then check the above mentioned two points..
    Thand and Regards
    Muralidhar Shetty

  • Not able to cancel the Excise invoice for STO process

    Hi All,
    In  STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
    Please guide how to cancel the same.

    Hi,
    STO has been created either through MM route or through SD-MM route.
    In MM route, the process is as below,
    You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
    In SD-MM route the process is as below,
    You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
    Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
    In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
    In MM route, you need to release the Excise doc to Accounting.
    In that case, you need to go for J1IV and release the same to accounting.
    Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
    Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
    Please let me know if any further problem you are facing.
    Regards
    Pradyumna

  • Reverse the material document before cancelling the excise invoice.

    Dear Experts,
    While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
    But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
    MINI

    Hello
    follow the below steps
    1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
    2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
    Thus the excise postings are reversed.
    3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
    above the procedure right. you will get this updation excise registers also
    Laxman

  • Cancel the Excise Invoice.

    Hi,
    I created the Billing document and Excise Invoice. When i went to the Document flow in the Billing Document I found the Accounting document of the Excise Invoice and its status is Cleared.
    After that I Cancelled the Excise Invoice. And again I checked the Document flow in the Billing document. But the status is showing the same.i.e Cleared.
    Wt it mean..is it correct?
    regards,
    jyothi.

    It is correct. the cancellation of excise invoice wont affect the document flow of sales document. For status go to J1ip enter the invoice no or billing doc and enter. here u can see reversed in the status.
    Hope it clarifies ur doubt.
    anya

  • What are options available to cancel the Excise Invoice?

    Hi,
    What are options available to cancel the Excise Invoice?
    Does cancelling the commercial invoice automatically cancels the excise invoice
    if not what are the other options?
    Any settings required to achieve that.
    Usefull answers will be rewarded
    Thanks
    Regards

    Dear Rajiv
    No cancelling commercial invoice will not cancel the excise invoice in background.  For that, you need to run the T.Code J1IH where if you click on Cancel Excise Invoice, system will ask for excise invoice reference, financial year and series group.  Here while giving the excise invoice number, you have to ensure that it is preceded with zeroes as you can see in J1I7.
    thanks
    G. Lakshmipathi

  • How To cancel The Excise Invoice

    Hi All
    what is the procedure to cancle the excise invioce if the excise invoice has already been get posted
    Thanks In advance
    ****appropriate solution will get rewarded

    Hey SP
    Return material to vendor its totally different process man.First of all in MR8M cancel your MIRO document.
    In case you want to reverse excise in this case follow are the steps.
    1. T code MBRL
    i select here quantity you are returning. Select the Stock type i.e. Unrestricted Stock or quality or blocked stock.
    2. With ref to MBRL document  go in J1is select material type MATD.
    3. Here you can check your entries of excise.
    4. After this do J1iV here you release this J1is document to accounting release.
    Process ends here only
    Secondly as you are saying there is deficit of quantity 10 this means that much of quantity must have been issued or you are selecting wrong stock type.
    1.For this you create a PO as return
    2. Enter quantity
    3.Do the MIGo
    stock will reverse w.r.t. PO quantity
    Then for excise
    Go in J1is
    Do same process i told above w.r.t. MIGO docuement
    Hope this will solve your problem
    Regards
    Vivek
    -- Reward if helful

  • How to cancel the Excise Invoice after Delivery Cancellation

    Hi,
    We are facing a Problem in Cancel Excise Invoice through J1IJ...
    By mistake, enter the amount in Excise Invoice was correct, so we reverse all the document i.e. Billing, Delivery BUT Skip the Excise Invoice.
    Now after Delivery cancellation, How can we cancel the Excise Invoice...
    Please guide...

    Hi,
    As a standard process J1IJ docuemnt must be reversed before you reverse the delivery. Else you will not be able to reverse J1IJ as delivery will no longer be available.
    You will have to come out of the error in debug mode by taking help of your ABAPer
    The logic for cancellation can be seen in the program SAPMJ1IJ subroutines CANCEL_DELIVERY.
    The tables to be updated are;
      1. J_1IEXCDTL
      2. J_1IRG23D
    Take the help of a technical consultant to update the tables according to the logic in subroutine CANCEL_DELIVERY.
    I suggest try this in DEV/TEST system before doing the same in PRD.
    Regards,
    Brinda

  • Excise invoice done with ZERO, not able to cancel.

    Hi Everybody,
    Client has done PGI with ZERO quantity also done billing & even done Excise invoice with Zero Quantity & Zero value. Now if i go to cancel that cancel invoice in J1IIN it is not allowing to cancel & not even displaying.
    That Invoice does not carries any value but even then client wants to cancel that exc inv number.
    How to cancel the Excise Invoice?
    Regards,
    Vijay

    Client has done PGI with ZERO quantity
          also done billing
    if i go to cancel that cancel invoice in J1IIN
         it is not allowing to cancel
    If your copy control is in line with standard settings, first of all you cannot post the goods issue without any quantity and also generation of billing is not possible.
    Coming to your second issue, please try in J1IH instead of J1IIN.
    thanks
    G. Lakshmipathi

  • Change mode of the excise invoice is showing zero excise values

    H ifriends,
    The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
    While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
    Thanks
    Sasi

    s

  • The excise invoice is  generatiing with inconsistant effect.

    Dear All,
    in my client i m having the excise invoice generation with the billing document at single step.
    but some there is ome in consistancy in this. some times when we do it in single process the excise invoice is not getting generated.
    it means if we are processing 1000 docuemnts its not processing for 300 documents.and  when we are going to do it mannualy then also it not showing in due list of excise invoice creation in J1IIN.
    please suggest what may be the probable reason for this.
    Thanks with Regards
    Subrat.

    Hi,
    To determine the automatic excise invoice have to maintain the default excise groups and series group, even thou every combination is there ,for your non generated invoices. Please sit with abaper and debug in j1iin by giving the billing document number in create mode.
    regards

  • Reg: How to capture the Excise Invoice with respect to Inbound delivery

    Hi All,
    Please give the process follow for capturing the excise invoice with respect to inbound delivery.
    Thanks & Regards
    Siva

    Hi Siva,
    Please check this link
    CIN with Example..?
    Regards,
    Bijoy Kumar

Maybe you are looking for