In reply to MK re: print too high...

MichaelKazlow:in Re: print too high;
I'm using A.Reader v.9.3.4 in XP.3 and Officejet J4540 series; I do think you are on to something with print preview composite showing Zoom 94% & page set to 8.27 x 11.69" but where to change to 8.5 x 11 inches since the zoom @ 94% does not jibe with over 11 lgth X less than 8.5 inches which would seem logical if the 94% issue were the trouble...please expound ~ Jaye ~

I'm not on Windows now, but the Windows dialog box is similar to the Mac Print dialog box.
You can see under Comments there is a Page scaling dialog box. Click on the drop down menu and switch from None to Shrink to Printable Area.
If you need to continue this discussion stay here or the original thread (at this point here might be better). Do not create yet another thread.

Similar Messages

Reader 11 pdf page numbers printing too high

After I upgraded to Adobe Reader 11, I have started having issues with page numbers on my pdf forms printing too high on the page. Instead of printing at the bottom of the page, they jump up to wherever the text on the page stops. For instance, if the text stops half way down the page, the page number prints one line beneath that text, so it's in the middle of the page instead of the bottom corner. The file looks fine on the screen, and if I print it in Reader 10 on another computer, it prints at the bottom of the page where it belongs. I've compared settings between my computer, and the computer where the file prints correctly, and I can't find any settings that are different. Has anyone else had this problem? And if so, suggestions for a solution?

looking again, it prints badly in Chrome, Safari, pdf, preview but NOT Firefox.
And, I was wrong about Gmail. it prints wrong from gmail, too.

Officejet 6500A Plus - Check printing alignment too high

I am unable to find a way to properly align my checks in the printer. They are printing too high on the form.
This question was solved.
View Solution.

Hi MMSINC,
You might try printing the checks with the Print Quality option set to Draft Mode. See Page 30. Does that help?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

When I print business cards, they sometimes print 1/4 too high but not always.

I have my business cards in a Word document using an Avery template. I have used the same file for years. I never had a problem with my Canon printer but after buying an HP Photosmart D110 I have had nothing but problems. When I print then they print about 1/4 inch too high ruining the cardstock and wasting ink. This doesn't happen all the time. Sometimes I print and they are perfect but when I go back and print another, the problem returns. This is the same card stock I have used for years and when it is inserted in the printer it doesn't matter if it is a single page or a stack of them. I have tried previewing the page before printing and the alignment is correct. I've tried printing to a PDF and then printing the PDF, same problem. I try it on the Canon and no problem. Only reason I bought this in the first place was the cartridges were cheaper and I do a lot of color printing and scanning! I have just replaced the cartridges and did a head alignment so that is not the problem. I have tried it with regular paper and the problem persists. I'm ready to drop kick this thing and buy another Canon!
This question was solved.
View Solution.

Did you ever find a solution for this problem? I have no problem printing the business cards out on a Canon printer, or a different HP printer I used to have, but the D110 is nothing but a pain in the you know what ! I'm using publisher and the avery 8371 card stock, I searched solutions for days and did everything possible but still they're not printing correctly!! I'm dissapointed in this printer, every time I have a problem with something it always seems to be an HP product!!! Very frustrating because I never had to mess with any settings in the other printers I had, I would just put the file in, change the quality and click the print button with no problems. I'm ready to throw this printer out the window Anyway thanks in advance and I hope somebody can help me with this issue !!!

MSI R7950 TF 3GD5/OC BE too high stock voltage

Hi, this is my first post so please be gentle with me
I just bought a MSI R7950 TF 3GD5/OC BE video card which is 960mhz stock speed, but I found out that this card has a too high stock voltage which displays 1.18v in GPUZ and 1.25v in afterburner. I don't think the card can last long with such a high voltage so I want to lower it.
I try to adjust the voltage in afterburner, it seems it changes in the software (the slide did change). But GPUZ still displays the same voltage.
Can anyone help me with this?
Thanks.

Quote from: tails on 07-April-13, 22:29:57
Thanks for the reply.
I've found the solution for that. I downloaded the version 3.00beta9 of afterburner and now it can change the vcore.
I changed the vcore from 1.25 to 1.05v. Now the card is running at 1050mhz, 57degree with 60% fan speed, cool and quiet. Before was 75 degree and 80% fan speed.
I'm satisfied now.
Ive got Afterburner 2.31, its allows undervolting as well. But problem is that in boost mode new values are ignored and back to default. So in that case cant see any sense in doing that. Is that changed in ver 3?
D.

Epson prints too dark from LR on color managed MacBook Pro?

Hi all,
I have a newish MacBook Pro, calibrated with Spyder2, and printing to an Epson 2200. The prints are too dark, and don't really come close to matching the screen in LR. I've brought the images into PS2 for soft proofing, but the prints are still far too dark. It's not just out of LR, but DPP as well. I found this topic:
http://www.adobeforums.com/cgi-bin/webx/.3bc44027/28
Tthat seems to describe my problem, but it seems to be Adobe-specific. Doug doesn't say if he's tried printing from other apps. I use Epson's custom profiles, which actually seem to be worse than the standard profiles that come with the driver.
A new twist seems to be that profiled jpg images with sRGB profiles exported from LR also print too dark when I had them sent out for printing, which leads me to think that my screen is not profiled correctly, or there's some weird flaw in the Mac's color management engine that skews everything.
My first question: When I profile my screen using Spyder2, I have the brightness set at maximum. Should I bring it down, and if so, how far? The Spyder2 help says use "Factory Defaults", but the MBP ships with brightness set on auto-adjust based on ambient light levels.
My second question: Are there others who have this issue? Have any of you resolved them successfully, and if so, how?
Thanks!
Timmy

Time for a reality/sanity check for those who complain that "the "prints are too dark from my Epson printer"!
If you will just reduce your monitor's white-point luminance to the range of 80-90 cd/m2 when you edit your images, it's almost certain that the problem will be solved (assuming you're not making some other error in color management setup). Many people conclude that their problem must be a generic failure or defect of Epson printers (i.e., compared to HP, etc)-- or that the Epson paper profiles are defective. Well, perhaps there's some element of truth to that conclusion--to the extent that Epson printers have evidently been designed with typical professional editing environments in mind (i.e., the low brightness levels to which "serious" printers adjust their monitors and ambient lighting). Why would they do that: Well, who wants to spend many hours each day looking at the glare of a 200 cd/m2 monitor screen (and the reflections from a brighly lighted room)?
So, for getting "monitor-matching" prints from printers such as the SP 2200, you simply need to work (edit) with your images in a more-or-less "dimly lit" room using a monitor that is properly adjusted for such a low-light environment--(i.e., the screen luminance not higher than 90-100 cd/m2). Of course even with such a reduced screen luminance, the light used for print-viewing must be sufficiently bright(**)
It's possible that your monitor cannot be adjusted to the necessary (low) luminance level--or that you haven't any means to measure the luminance level. Those are correctable hardware issues, although may require $$.
(**)please note that a fairly bright viewing light is needed for prints (made as suggested above) to appear to be a reasonably close "match" to the monitor image.
Phil

Print too small and does not fit page.

Using windows XP and a Brother printer. Have tried several steps listed for solving this problem.
In trying to reset firefox printer instruction , cannot locate the print.print_printer in the list to see if that will work. It is not there. How do I solve that problem?
Changed scale and font size and still does not work to restore settings.
Have version 21.0 installed on computer.

If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

ITunes store print too small and light

Does anyone else with that it were possible to enlarge iTunes store with a two-finger swipe? Or at the least, make the type bigger and darker. Thanks for your consideration.

If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

Audio level too high

I created a slideshow with music behind it in iPhoto. It plays fine althought the audio level is noticably higher than another project I made with a different song. I added both projects to an iDVD project so I can burn 1 disc with both slideshows. They both preview fine in iDVD. Now after I burnt the dvd the audio tracks are distorted when I play them on my home DVD player. It seems the audio level is too high. Is anyone able to tell me how I can adjust my background music level? Thanks for the help.
d

Thanks for the reply John. I thought I saw a setting to change levels somewhere but I think that was when I was importing a movie from my camcorder. I will try to edit the levels as you suggested later today and report back.
Incidentally, the audio is not distorted when I play the dvd from my computer. I am also going to see if I can get some other players to try it on.
Message was edited by: dguiley

Ms word95 to pdf - "security level too high"?

I'm a brand new user of Acrobat 9.0 (on XP system) - all kinds of problems (including major file crash and loss during 9.0 installation - more on that later). for now, I need to get started immediately on converting some MS Word doc files to pdfs - What I get from 9.0 is the message that "The Security Level is Too High". If it's referring to the MS word docs, they are unprotected (I've checked and tried several - Word shows they are not protected, and as far as I know, never have been). They were originally created on a mac with macWord - but were not protected and converted to windows with MacDrive7. They show in MS Word in good condition and unprotected. What do I need to do to get them into acrobat and into pdf format? I've also check the knowledge base here and elswhere without any clues except one chap who seemed to be having similar problems (along with serious crashes) using 8.1. Other than that, I'm mistified.
I've also tried using the context menu 'covert to pdf' method and also creating a new pdf (blank) and inserting them. In both cases the security message aborted the process. Need to do this right away. I'm not technically skilled, so if someone can give me some clear instructions I'd be grateful. - red

Thank you all for responding so quickly. First, I'll mention the serious message and a warning. DO NOT INSTALL ACROBAT 9.0 IN AN ENVIRONMENT WITH WORD 7.0 (or any old(er) MS Word version before 2k). The consequences are ghastly, including the deletion of half or more of your program files (including your email clients, av software and other primary programs), the corruption of your browser, registry (including restore points) and other not so nice events - worse than most bad viruses. That's a problem Adobe and I will probably be taking a look at next week. Mean time, they indicate that they are going to add the matter to their KB and elswhere so that users have a heads-up on the issue.
As for the conversion problem from Word 7.0 .doc to .pdf - Bill, you just about nailed it. It was, indeed, a problem that could be circumvented by going to the printer dialog and setting the printer to 'Adobe pdf file' (something a novice wouldn't think of, nor line tech-support for that matter.). As far as Word/pdf 'printer' is concerned you're just printing the file. However, as I understand things, that's how Adobe attaches the Word documents - It does it through the printer interface. Once that setting is changed to 'Adobe pdf printer' the file is simply picked from the print queue (or before) and loaded into A9. Save it from A9, and the job is done. So, Bill, If Adobe hadn't found the answer, I do believe you would have been telling me exactly how to do it after a few more posts. The credit, though, goes to Neo Johnson, tech-support supervisor in New Delhi. The last two days (almost 9 hours of phone time) were spent with various tech-support agents at Adobe; but, he was the one who finely thought about the interaction between A9 and Word and figured it out.
Ok -that's the brief. The rest is a little history/background for whomever is interested (skip, otherwise - not important). The problem begins with failure to install - first, setup can't find the msi file - it was there, and I browsed it, so that was solved. Then 'invalid licensing - process stopped' messages appear. That was a little tougher and http://kb2.adobe.com/cps/405/kb405970.html and some other articles had me doing repair, reinstall, and other complex (for me) procedures. One of the problems was that flexnet had failed to install, which was a stumper for me (I couldn't find it to download separately - barely knew what it was/did - and finally understood that Adobe was supposed to install it. After that, I did several uninstalls, to no effect. Finally I did a few moderate and then deep uninstalls (with Revo) and several reinstalls. Things got progressively worse. On one reboot, my desktop came up and all the program icons were broken links. I examined targets and such and then went to my 'program files' directory. To my horror, nearly all my primary program (including thunderbird email client, AVG etc.) files had disappeared. The folders were simply empty. Firefox still loaded, but the tabs were non functional. Several checks and some light disc analysis indicated the files vanished. No trace. However, my document folders and data were intact (also backed-up). I went to restore and found that all the old restore points (including the one's Revo sets before uninstalling) were gone. If it had been a virus, it couldn't have done a better job at making a mess of things. At that point, I knew the registry had been toasted and I was facing a complete OS reinstall. Instead, I opted for reinstalling some of the critical programs (and because the document files appeared to be intact). After the first few - thunderbird, firefox etc. - I was relieve to find that they were picking up on the old settings and restoring themselves to their previous states. I still have a number of these to do - and a few must be re-configured. But that's going ok.
Then the saga of Adobe, several phone calls; several times the phone connection was cut off and I had to call again and start over from the beginning with a new person. The matter always had to be esculated to the next tier - more time, more cues, no solutions. They went over the firefox settings, the adobe settings. They were puzzled about the broken links. Attempts to open doc files (after a fresh install of winword) were resulting in 'invalid win32 application'. All kinds of problems made progress difficult. We cleared up the 'invalid....' messages by reparing the file associations (in XP folder options) and then opening the docs in Word and resaving them as something else. It was a labor. Finally, there was simply no answer except, like the post here, Word 7 is simply too old and uses different scripting. The only solution was to either buy (ugh, ouch!) Word 2007 (and hope that it would load them and save them in A9 useable form) or, try installing Word2k (which I have) and processing them through that; and, then using Acrobat 8.x to load those and save the pdfs for A9 to use. However, when Adobe said they could not provide me with a free (even trial) version of 8.x to do the job - licensing problems etc. -- It seemed like a really ugly solution. Finally, I'm begging Adobe to give me a free copy of 8.x and in steps Neo. He can't provide the free copy, but he asks a few questions himself. We go to Adobe and reset some of the security settings (something other agents didn't know or think of). No dice - still can't load the docs. But then he says, Open up Word. Ok. load the file and then hit 'print' - ok, the print dialog comes up. 'Now,' he says, 'open the properties and see what printers are listed.' Ok I do that, and I'll be... 'Adobe pdf printer' is among them. "Just what I thought," he said, Adobe was hooking up with word, but didn't have its printer to attach." So we set 'Adobe pdf' as the printer and lo and behold, the docs loaded into Adobe as pdfs. End of that story. (so bill, you had it too - wish you had answered the phone in the first place!)
Clean up. So, there's a few simple solutions, I think (though i'm no techie and you folks will certainly have better ideas). First, I don't buy the story that early versions of Word are either 1) unsupported by MS or, 2) nobody uses them, as valid reasons why not to fix the problem of the "unloadable" docs. I figure there are at least a couple of aproaches and easy patches that will correct the matter. One is from the Word side - to is to set the current printer setting to use 'Adobe printer', get the file and then reset the printer back to what it was - default. The other is to patch A9 to detect legacy source applications and bypass things that would normally make the file unloadable, unless, of course, they were actually protected or, read only files. In that case, Adobe could simply inform the user to 'unprotect' them, the same as it now does with its 'Security Setting too High' message for later versions. I'm sure there are even better ways. But, that would fix things as far as file loading and conversion.
As to the installation and crash problems - those need to be addressed. Even if its only a few dozen people that might have the same problem, it needs 1) to be given as a noticable warning and keyword in Adobe documents (which now simply indicate that it can process .doc files); 2) it needs to be examined to insure systems that have Word 7.x or older can install without problem, and certainly without harming their system. Adobe has a good reputation and does a good job. That's worth protecting with all customers, even if Marketing can't quite see why and the bean counters can't find much profit in the task. It's what I expect from professionals and to do less certainly subtracts from Adobe's standing. That should be worth a great deal, I would imagine.
Anyway, thanks folks - got to get some sleept, and then get those pdfs done and sent to people who are waiting for them. - best to you all, red.

Are JPEG 3504x2336 pixel pictures too high resolution for the photo books?

Hi,
I am done creating my photo book and I am ready to order, but I'd like to know if my pictures are too high resolution. They are professional wedding pictures so they are 7.4 mb each JPEG 3504x2336 pixel pictures. (Last time, I printed through MyPublisher but the pages with multiple pictures didn't turn out well and they said it was because the resolution was too high so when they compressed the file for the pages with multiple pictures it didn't turn out well.) Will I run into the same problem if I print directly through Iphoto?
If I do need to lower the resolution, how do I do it, given that I've aready created the book?
Thanks for any help you can give me!

Welcome to the Apple Discussions.
When you order the book it will be compressed and a PDF will be created. That PDF is what gets uploaded to Apple (via Kodak) for printing. So the best way to check your book before ordering is to create a PDF, then inspect it. Chances are, what you see in your PDF is what you will get printed.
To do this, select your book and do File > Print. You'll get an "Assembling book" progress bar. That can take several minutes. When done, you get the Print Dialog box. Click the PDF button and choose "Save as PDF..." Choose a name and location for the file (the Desktop is convenient) and Save. Then switch to the Finder and open that PDF in Preview. You might select a page or two and do a test print yourself, to see if the quality looks good. The PDF saves you from having to print out the whole book yourself to check for errors.
Regards.

I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?

I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?

When you are dealing with websites, image file size is a trade off between quality and download speed. There's not a lot of point to having high quality images if they take too long to download in the browser.
Nowadays we also have to consider the device that the end user is viewing the images on. An image that is optimized for viewing on a large screen is total overkill and unsuitable for those using mobile devices.
Really we should be supplying different versions of media files for different devices using @media rules in the stylesheet but this is rather outside of the scope of iWeb. If you use the built in image optimizer and the iWeb Photo template with slideshow, the application will optimize the images according to the way in which you set this function in preferences and the slideshow size will be automatically reduced for those viewing it on smaller screens.
If you want to give your viewers the opportunity to view large, high quality images, you can supply them as a download.

Yosemite Apple Mail prints too small

After Yosemite upgrade the body of text in Apple Mail messages prints extremely small. 2 Printers tested - HP Laserjet 5100tn and a Konica Minolta 5500 with a Fiery controller. Printing to a PDF file first is OK.
This only seems to occur when I print messages that I've sent or when I print a message where someone has replied to a message that I sent previously. Only the body of the messages that I sent prints too small. The From, Subject, Date, To, My signature, and anything from messages that have been sent to me from someone else are all OK. In messages that were replies to me from messages that I sent to others, everything is OK except the body of the message that I originally sent to that individual.

I have had this issue as well and have not really been able to resolve it. Yosemite Mail app doesn't seem to have the option that previous OS did where you could choose "Scale Message to Fit," "Rewrap Message to Fit," etc.
Am I missing something here or did they disable this option? I know I can change font or increase font size in preferences, but I don't really need to increase font size for display, only for printing, which seems to be very tiny no matter what I try to do.

Nfs_write_latency, how high is too high

statistics show-periodic -object volume -instance volume_name -counter nfs_write_latency I am running this command on volumes, and got different values, from 0 us to a few hundreds, How high it is too high, and then we could have performance issue.Anybody please let me know your measurement? Thanks!

Hi, I think this is a duplicate post which I replied to ( http://community.netapp.com/t5/Data-ONTAP-Discussions/nfs-write-latency-how-high-is-high/m-p/106871/highlight/false#M22005 ) Thanks

Photosmart alignment too high

Photosmart all in one, printing alignment is always an inch or two too high on the page, so I loose at least an inch.

Need a little more information about this issue. What model is the Photosmart printer? Is this being done on white 8.5x11 paper? Is the paper tray (if removable) installed fully into the printer?
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

In reply to MK re: print too high...

Similar Messages

Maybe you are looking for