In RFc Response no data is coming

HI All,
I m doing File to RFC scenario where sender is a file adapter & receiver is the RFC Adapter while request data is coming into the RFC but for response from RFC empty payload is coming..
pls resolve this problem as early as possible...
Thanks

HI Avinash,
Make sure that your RFC is giving proper response with the input you are trying to send.
You can Verify this by executing your RFC in Standalone (i.e from se 37).
Check the Status of you rfc communication channel in RWB if it is green.
Do the Message Monitoring in RWB.
Are you using BPM ? (As your Scenario is File to RFC ) or Module.
Thanks
Sunil Singh

Similar Messages

RFC response no data

Hi everyone,
I am now doing a sync RFC in a xi integration process. The RFC returns blank response, but I have checked that the RFC request is right. What's more, I tried the same RFC module in the r/3 system using SE37, it works fine with response data. What is the problem? And is XI has a tool to debug calling rfc? Thanks!
Regards,
Nick

Hi,
1) First check if the RFC is working fine or not..
2) If your RFC is working fine then the only problem in your scenario is with your input to RFC from XI..The problem will be the input that you are sending to RFC may not produce an output...
Just check the case sensitivity of your input.
Hope this helps you...If not give more details about your input.
Regards,
Sudheer.

JDBC to RFC.request and RFC.response to JDBC

Hi all,
I have the need of create this scenario: JDBC will pick some records from DB and send them to SAP into a RFC.request, after that, SAP will generate a response that will be sent to XI (via the RFC. response), these data has to be sent back to the DB.
So I am clear in the first part: JDBC sender and sRFC receiver, so that, the response will be sent back to XI, BUT, is there a way to map these response data into a DT_Receiver_JDBC without using BPM???? If so, how?
And, what about the initial loads of data??? Customer wants this kind of scenario to be used then. What do you think about that?
I know XI is not the best approach for this purpose but... And i think i would have to take into account the response time of SAP in synchronous RFC...
Hope you guys may help me on this.
Thanks in advance and best regards,
David

is there a way to map these response data into a DT_Receiver_JDBC without using BPM?
No. U will have to use BPM.
I have not used it personally with JDBC adapter but u may try this to avoid BPM. Hope it works
http://help.sap.com/saphelp_nw04/helpdata/en/45/20c210c20a0732e10000000a155369/frameset.htm
I know XI is not the best approach for this purpose but... And i think i would have to take into account the response time of SAP in synchronous RFC...
For sync scenario, the response time should always be considered. However, using XI won't be that much of pain. It will surely relieve you when it comes to monitoring.
Regards,
Prateek

How to handle empty Dats field received from SAP RFC response

Hi All,
I am invoking a SAP RFC which gives me a Dats field in response.
A valid dats fields is successfully received by my pipelines.
But when an empty Dats field is received, My pipeline fails and i get error.
How to handle the empty Dats field from SAP

Hi Anant,
This is because the legacy SAP adapter accepted RFC messages with date field empty. In the new version, the same call results in an error. WCF-SAP adapter doesn't allow blank XML nodes.
You need to use the below custom pipeline component as a workaround.
Refer:
Pipeline component for enabling legacy behavior in WCF-SAP adapter.
Rachit
Please mark as answer or vote as helpful if my reply does

How to merge source data with RFC response and post back again as Idoc

Hi All,
This is the requirement we have for an interface
The legacy application is sending Vendor master to PI 7.0
If it is new vendor then it is send as an Cremas Idoc into SAP. Legacy (New Vendor) -
> PI 7.0 -
>Cremas Idoc SAP
If it is changed Vendor legacy will only send changed fields for that Vendor.In PI we would like to call an RFC which will return all the data for that changed Vendor Number and then merge the RFC response with changed data from legacy and then send it to SAP as Cremas Idoc again with all values.
I know these can be achieved using Proxy by custom Abap Code in SAP.But we would like to avoid it.
How can we achieve it?
1.RFC lookup - Shall we use these , when PI receives changed Vendor from legacy ,it will call RFC using RFC lookup and the response message from RFC lookup should be merged with source data .Is this possible?
2.Shall we achieve this using BPM ?Is it feasible and How?
Any Help greatly appreciated
Thanks,
V

If it is changed Vendor legacy will only send changed fields for that Vendor.In PI we would like to call an RFC which will return all the data for that changed Vendor Number and then merge the RFC response with changed data from legacy and then send it to SAP as Cremas Idoc again with all values.
I am not sure why you want to pull whole data from R3 and send back to R3.
you can follow any of these approach..
if you have any indicator for new/ changed cusotmer in the legacy data then trigger CREMAS IDoc accordingly.
mapping rules will be diffrent for New and changed CREMAS idoc.
otherwise just do RFC look up for each record then based on the output(new/changed) create or update cusotmer data through CREMAS IDoc.
when changing the customer through CREMAS no need to pass whole data again. it is enough if pass the changed fields. offcourse qualifier values for segments will differ.

File to RFC, and through RFC response i am trying to trigger the Mail adapt

Hi All,
Right now i am doing File to RFC, its working fine but now the requirement is when xi connect to ftp and picks the file need to send one success mail after the file pickup and data sent to BW system again i need to send one mail and also error alerts to inbox.
Till now i am not using BPM, can we do this without BPM pls let me know
now i am trying to achieve this in File to RFC, and through RFC response i am trying to trigger the Mail adapter.
or else i need use only BPM pls share the steps which i need to be configure.
Am i correct or pls suggest me some idea to achive this and also pls share some smaple ones in BPM .
Thanks in advance
Venkat

With BPm, follow this:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Instead of receiving the response in file, use mail adapter
Regards,
Prateek

Mapping problem in SOAP response to RFC response - RFC-XI-SOAP scenario

Hi gurus,
response structure from SOAP is as below (inbound msg - in SXMB_MONI)
MONI and RWB shows successful(I am using graphical mapping)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <ns0:testrequestResponse xmlns:ns0="conversion" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" Status="Success">
- <ns0:SAP_OUT>
       <ns0:F1 Value="1234" />
       <ns0:F2 Value="2345" />
     - <ns0:SAP_LINES>
         - <ns0:SAP_LINE>
                <ns0:SAP_L Value="1" />
                <ns0:Field5 Value="" />
              - <ns0:SAP_S1>
                       - <ns0:SAP_S>
                               <ns0:ID Value="11111" />
                               <ns0:SAP__NO Value="0001" />
                               <ns0:DATE1 Value="08/15/2008 00:00:00:000" />
                               <ns0:FST/>
                         </ns0:SAP_S>
                </ns0:SAP_S1>
         </ns0:SAP_LINE>
      </ns0:SAP_LINES>
</ns0:SAP_OUT>
</ns0:testrequestResponse>
I make the RFC response with same structure and mapped it but it is not giving the full structure rather it is giving only this (Outbound Msg in SXMB_MONI)
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Z_MYRFC.Response xmlns:ns1="urn:sap- com:document:sap:rfc:functions">
<STATUS>Success</STATUS>
</ns1:Z_MYRFC.Response>
what went wrong?

Hi,
You would have forgot to map parent node coming after <STATUS>Success</STATUS>
Make sure that you have properly mapped all the parents and there child.
Are you getting the same result while Testing it standalone?
Thanks
Sunil Singh

RFC Response Error in XI

Dear team,
In my SOAP to RFC scenario, Im facing the error.The is two message mappings in my scenario.
One is between SOAP Req MT and RFC Import str . Second one is b/w RFC.Response and SOAP RESP MT. While Im testing with XMLSPY the request mapping is executed successfully. the RFC executes its functionality successfully in SAP[updating data in atransaction]. The RFC response should be "SUCCESS" or "FAILURE".*Even if we check RFc individually its working fine and giving response as SUCCESS / FAILURE* .
BUT
In my case I got the below error in MONI in Response message .The INBOUNDMESSAGE(CENTRAL)->Payload contains the below response. So obviously the response mapping failed in XI . Why im getting this error. BUT RFC functionlity working in SAP , but response getting error .
Failure case:
- <rfc:ZRFC_USAGE_DEC.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<Name>JCO_ERROR_XML_PARSER</Name>
<Text>Expecting a tag to begin with '<' instead of '#', in "#F#A#I#L#U"</Text>
</rfc:ZRFC_USAGE_DEC.Exception>
SUCCESS case:
- <rfc:ZRFC_USAGE_DEC.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<Name>JCO_ERROR_XML_PARSER</Name>
<Text>Expecting a tag to begin with '<' instead of '#', in "#S#U#C#C#E"</Text>
</rfc:ZRFC_USAGE_DEC.Exception>
Thanks.
-Drumi

I have done cache refresh, cross checked MT strucures.
SOAP Response MT structure is
--->MT
>REsponse
RFC.REpsonse Structureis...
--->RFC.RESPONSE
>Response
-Drumi

Wrong RFC-response filling with characters '#'

Hi all,
we have an XI scenario in which a Report use a synchronous RFC call to run a query on a DB table and return the resultset to the calling Report.
Sync RFC call -> PI 7.0 -> JDBC Query (Select u2026 with ResultSet) -> PI 7.0 -> RFC Adapter
Weu2019ve some troubles on the data returning from the resultset of the query, thatu2019s rightly filled, and the RFC-response structure because there are some '#' characters as values of the response fields.
Weu2019ve loaded into the Message Mapping the instance of the resultset (rightly filled) and the test has run successfully, so perhaps the issue itu2019s regarding the RFC Adapter side.
Now the mapping mapping is set up with constant values but not all the RFC-response fields are filled, infact there are some u2018#u2019 characters that break the values in more lines.
Weu2019ve already run the full cache refresh on XI on the ABAP and Java side, also weu2019ve restarted the XI instances without results.
Any ideas?
Thanks in advance,
GB

If its due to the special characters that are popping in the result of query which does not seem to be valid for RFC response,
1) try to make the RFC Destination Communication Setting as "Unicode"
2) Check the data type of RFC Response structure could be the fields for which the data is mapped are of date/numeric, in that case RFC data type has to be changed.
(you would have to reimport the RFC into PI i guess)
3) If you feel you would not require these special character, you can filter the same in mapping.
4) After all these if you are still struck and data types are rightly defined and rfc destination is rightly maintained for Unicode, then it i feel the problem resides in the RFC Adapter to convert the xml message into ABAP RFC Format using its metadata, in that case i recomend to change the scenario to Proxy from RFC where by the messages are routed by ABAP stack not by Java.

JDBC(Sender)-XI-RFC (Request) RFC (Response)-XI-JDBC(Receiver)

Hi All,
JDBC(Sender)-XI-RFC (Request)
RFC (Response)-XI-JDBC(Receiver).
Need some solution for sending email for successfully completion of scenario after updating SQL DB Table.
Let me explain the scenario:
We are pooling the SQL DB table to pull the records and map the records to RFC request parameters, after successful Posting the entries in R3 HR, RFC response contain the same with E (Error) S (Success) records status, we are updating the same in SQL DB table, I implemented the complete scenario without BPM with the help of module processor in Sending JDBC Adapter, scenario is working fine but now we have to send the successful mail to our support team with status contain Number of success, Error and total records as email.
I need the solution how to implement the same requirement in current scenario.
Is their way to do something with the RFC receiver adapter module addition to send the successful mail or generating Alert with all the description?
I am at PI 7.0 SP12 with HP unix box.
Thanks in Advance for creative idea
With Regards
Sunil

Hi Bhavesh,
Thanks for your help and your blog is really helpful. I implemented the UDF for generating Email Alert but this alert is generating before Updating the SQL Database, is their any way to generate alert after updating the SQL.
Actually in my scenario we are sending the data from SQL to R3 by RFC and again updating the SQL status whatever the RFC return, after successfully updating SQL we need to send success email to support people but if we are sending the email before updating the DB then their will be problem.
JDBC receiver after updating the SQL DB returns the response with No. of row updated but how to capture this response, if we can capture this response then we can send email through email adapter even their is one more problem, In my scenario I am counting the number of rows with status S and E and sending the same in alert email but if are sending email after updating the SQL DB where can hold the row count value and use it while sending the email.
Implemented the scenario without using BPM..i am using sender JDBC module processor for Syn-Asyn bridge.
Even I do not find the link to reward point. Please let me know how to do it.
With Regards
Sunil

RFC response from Java mapping

Guys,
I am RFC response in my java mapping as &lt & &gt. Any ideas why and how we can make it to get in xml < > format. The problem is parser does not identify this format.
<?xml version="1.0" encoding="UTF-8"?><rfc:BAPI_COMPANYCODE_GETDETAIL.Response xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><COMPANYCODE_ADDRESS><ADDR_NO></ADDR_NO><FORMOFADDR></FORMOFADDR><NAME></NAME><NAME_2></NAME_2><NAME_3></NAME_3><NAME_4></NAME_4><C_O_NAME></C_O_NAME><CITY></CITY><DISTRICT></DISTRICT><CITY_NO></CITY_NO><POSTL_COD1></POSTL_COD1><POSTL_COD2></POSTL_COD2><POSTL_COD3></POSTL_COD3><PO_BOX></PO_BOX><PO_BOX_CIT></PO_BOX_CIT><DELIV_DIS></DELIV_DIS><STREET></STREET><STREET_NO></STREET_NO><ST R_ABBR></STR_ABBR><HOUSE_NO></HOUSE_NO><STR_SUPPL1></STR_SUPPL1><STR_SUPPL2></STR_SUPPL2><LOCATION></LOCATION><BUILDING></BUILDING><FLOOR></FLOOR><ROOM_NO></ROOM_NO><COUNTRY></COUNTRY><LANGU></LANGU><REGION></REGION><SORT1></SORT1><SORT2></SORT2><TIME_ZONE></TIME_ZONE><TAXJURCODE></TAXJURCODE><ADR_NOTES></ADR_NOTES><COMM_TYPE></COMM_TYPE><TEL1_NUMBR></TEL1_NUMBR><TEL1_EXT></TEL1_EXT><FAX_NUMBER></FAX_NUMBER><FAX_EXTENS&g t;</FAX_EXTENS></COMPANYCODE_ADDRESS><COMPANYCODE_DETAIL><COMP_CODE>0001</COMP_CODE><COMP_NAME>SAP A.G.</COMP_NAME><CITY>Walldorf</CITY><COUNTRY>DE</COUNTRY><CURRENCY>EUR</CURRENCY><LANGU>D</LANGU><CHRT_ACCTS>INT</CHRT_ACCTS><FY_VARIANT>K4</FY_VARIANT><VAT_REG_NO></VAT_REG_NO><COMPANY></COMPANY><ADDR_NO></ADDR_NO><COUNTRY_ISO>DE</COUNTRY_ISO><CURRENCY_ISO>EUR</CURRENCY_ISO><LANGU_ISO>DE</LANGU_ISO></COMPANYCODE_DETAIL><RETURN><TYPE>W</TYPE><CODE>FN021</CODE><MESSAGE>Address data not found for company code 0001</MESSAGE><LOG_NO></LOG_NO><LOG_MSG_NO>000000</LOG_MSG_NO><MESSAGE_V1>0001</MESSAGE_V1><MESSAGE_V2></MESSAGE_V2><MESSAGE_V3></MESSAGE_V3><MESSAGE_V4></MESSAGE_V4></RETURN></rfc:BAPI_COMPANYCODE_GETDETAIL.Response>

If you check Michal's guide on RFC Loopkup, it also comes with < and > chars.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/801376c6-0501-0010-af8c-cb69aa29941c#search=%22site%3Asdn.sap.com%20lookup%20rfc%22
What happens if you output this string directly to output stream? I think XI will be able to understand it as a XML. Then, you could execute another mapping program to parse this XML and get the fields you want. In a same interface mapping, you can use more than one mapping programs.
Regards,
Henrique.

Data not coming in cube...

Hi,
I have loaded data in ODS but when loading the data from this ODS to cube it is not fetching any data in the cube. I have created the DTP to transfer data from ODS. but no data is coming in cube.
Any mistake I have to correct? or any setting I have to check?
Please let me know.
Thanks,
Jeetu

Hi Ravi,
I presed execute button from DTP in schedule tab.
It is showing DTP as green , no error is there.
But no records are loaded from ODS through DTP.
Thanks,
jeetu

Delivery schedule dates are coming in Past dates

Hi Friends,
In the Scheduling Agreements the delivery schedule dates are coming in the past dates even tough the scheduling agreements are having new schedules. There is also open quantities there for the scheduling agreements.
please kindly explain me what is the delivery schedule date in Scheduling Agreement.
Thanks in advance.
Regards,
Kannan M

Hi Khan,
Just check this thease might be the reasons to get correct the delivery schedule.
To access a delivery schedule, mark a scheduling agreement item and choose Goto ® Item ® .
The following data is displayed in the delivery schedule tabstrip:
·        Delivery schedule number and date
·        A wide range of standard cumulative quantities
·        Delivery information
To display deliveries for the delivery schedule, choose Deliveries on the delivery schedule tabstrip.
In scheduling agreements involving external agents, the system displays deliveries made to the customer by external agents as consignment issues.
·        Correction delivery information
To display or create correction deliveries, choose Corr. delivery on the delivery schedule tabstrip.
·        An analysis function
·        Information at a glance
To display a summary of delivery schedule data, choose Short disp. on the delivery schedule tabstrip.
·        Schedule lines
Choose DlvSch.Hdr on the delivery schedule tabstrip to access the delivery schedule header. The following data is displayed here:
·        Information on quantities received by the customer
·        Information on the customer fiscal year and cumulative quantities reset due to a year change
·        A wide range of cumulative go-ahead quantities
·        Notes on the delivery schedule
Correcting Cumulative Delivered Quantities
Prerequisites
You correct cumulative quantities in scheduling agreements:
·        In case of returns
·        When there has been a processing error
·        When there has been a year change
·        When you are transferring initial quantities from a legacy system into the SAP System
To do this, you create a correction delivery within the delivery schedule itself. This delivery is not relevant for requirements planning, shipping, goods issue, or billing.
Correct cumulative quantities only when the customer has not posted goods receipt.
Procedure
To create a correction delivery (document type LFKO):
       1.      Choose Corr. delivery on the delivery scheduletabstrip.
The system displays a dialog box in which you enter a:
-         Correction delivery date
For help on deciding where you want to position the correction delivery, choose Display. The system lists delivery dates in chronological order.
-         Correction quantity
Enter a negative correction quantity by placing a minus sign after the quantity.
       2.      Choose Enter and save the scheduling agreement.
Result
When you save the correction delivery, the system updates the cumulative quantities in the delivery schedule.
To display correction deliveries, choose Deliveries on the delivery schedule tabstrip, or Environment ® Display document flow.
Example
Your customer returns 200 pieces of material from a delivery made on 7/10 because of damage during transport. Several other deliveries have been made before you prepare the correction delivery, so you view a list and choose an appropriate date. In this case you decide on 7/14 because it occurs after the delivery on 7/10 and before the delivery on 7/15.
Regards,
Murthy V.N

Data not coming to BW from SAP system from last 7 days....please help

Hi Experts,
I am monitoring the process chain from last 7-8 days but no data is coming to BW from SAP R/3 . then i checked in SAP R/3 system in RSA7 there weree no queues it was empty. then i checked LBWQ and some MCEX03,MCEX11,MCEX13,MCEX04 were there and i double clicked on one of them then i saw the status in queue as NOSEND . we have used QUEUED DELTA as update mode in LBWE. now i want to bring data for last 7-8 days in BW system. please can anyone provide me the detail steps for this as it is our PRODUCTION system. please provide the steps...!!!!

Hi,
Go to SM37 in your R/3 environment and check if there are any jobs starting with LIS* in released status. This is the job which would push the entries from LBWQ to RSA7 for specific applications. If there are no jobs, this is the reason for your problem.
If you do find any job there, then double click on them to check their frequency. Generally it should be hourly.
If there is no such job, then go to LBWE. For each of your applications, click on Job Control and maintain the job scheduling. In the start date, maintain it as periodic job. Then simply schedule teh jobs. Once the jobs are scheduled, after every run of them, LBWQ would get cleared.
Then it would get picked from RSA7 by the BI job.
Edited by: Rahul K Rai on Dec 8, 2010 4:00 PM

As we are having a problem explicit with Adobe Reader 11.0.07, we are interested in news and dates for coming updates to Adobe Reader. Can I find information about this anywhere ?

As we are having a problem explicit with Adobe Reader 11.0.07, we are interested in news and dates for coming updates to Adobe Reader. Can I find information about this anywhere ?

Hello Claus,
you could have a look here: http://helpx.adobe.com/security/products/flash-player/apsb14-13.html and in german language http://www.chip.de/downloads/Adobe-Reader_12998358.html
In all These cases Google could be "your friend".
Hans-Günter

In RFc Response no data is coming

Similar Messages

Maybe you are looking for