Data not coming to BW from SAP system from last 7 days....please help

Hi Experts,
I am monitoring the process chain from last 7-8 days but no data is coming to BW from SAP R/3 . then i checked in SAP R/3 system in RSA7 there weree no queues it was empty. then i checked LBWQ and some MCEX03,MCEX11,MCEX13,MCEX04 were there and i double clicked on one of them then i saw the status in queue as NOSEND . we have used QUEUED DELTA as update mode in LBWE. now i want to bring data for last 7-8 days in BW system. please can anyone provide me the detail steps for this as it is our PRODUCTION system. please provide the steps...!!!!

Hi,
Go to SM37 in your R/3 environment and check if there are any jobs starting with LIS* in released status. This is the job which would push the entries from LBWQ to RSA7 for specific applications. If there are no jobs, this is the reason for your problem.
If you do find any job there, then double click on them to check their frequency. Generally it should be hourly.
If there is no such job, then go to LBWE. For each of your applications, click on Job Control and maintain the job scheduling. In the start date, maintain it as periodic job. Then simply schedule teh jobs. Once the jobs are scheduled, after every run of them, LBWQ would get cleared.
Then it would get picked from RSA7 by the BI job.
Edited by: Rahul K Rai on Dec 8, 2010 4:00 PM

Similar Messages

Data not getting inserted in R/3 System from Webdynpro

Hi,
We were trying to insert some data into r/3 z-table using a Custom BAPI using RFC.
But the data is not getting inserted.
Through I commit is being performed explicity.
Please help:
Below is the code :
Controllor code :
public void wdDoInit()
    //@@begin wdDoInit()
     try{
        Z_Bapi_Rfq_Test_Input objStatus = new Z_Bapi_Rfq_Test_Input();
        wdContext.nodeZ_bapi_rfq_test().bind(objStatus);
//        Create a new element in node Bapi_Transaction_Commit_Input
      Bapi_Transaction_Commit_Input inputCommit =
      new Bapi_Transaction_Commit_Input();
      wdContext.nodeBAPI_TRANSACTION_COMMIT()
      .bind(inputCommit);
        //Bapi_Transaction_Commit_Input obj;
       // wdContext.nodeZ_Bapi_Quo_Salesrep_Status_Input().invalidate();
        //wdContext.nodeOutput().invalidate();
        //wdContext.nodeRfq_Status().invalidate();
          } catch(Exception rfqException){
                    wdComponentAPI.getMessageManager().reportException("rfqException="+rfqException.getMessage(),true);
    //@@end
public void executeBapi( )
    //@@begin executeBapi()
     try{
               Z_Bapi_Rfq_Test_Input obj = wdContext.currentZ_bapi_rfq_testElement().modelObject();
               AbstractList   objAbBapiPartner = new Bapiparnr.Bapiparnr_List();
               Bapiparnr objBapiPartner = new Bapiparnr();
               objBapiPartner.setPartn_Numb("0000001046");
               objBapiPartner.setPartn_Role("AG");
               //obj.addPartner(objBapiPartner);
               objAbBapiPartner.add(objBapiPartner);
              obj.setPartner(objAbBapiPartner);
              Bapisdhd1 objBapisdhd1 = new Bapisdhd1();
               objBapisdhd1.setSales_Org("2500");
               objBapisdhd1.setDistr_Chan("30");
               objBapisdhd1.setDivision("20");
               objBapisdhd1.setDoc_Type("ZRFQ");
             obj.setHeader(objBapisdhd1);
             obj.execute();
//             Synchronise the data in the context with the data in the model
               wdContext.nodeZ_bapi_rfq_test().invalidate();
          wdContext.nodePartner().invalidate();
               wdContext.nodeHeader().invalidate();
               wdContext.nodeOutput().invalidate();
               wdContext.nodeReturn().invalidate();
//               Z_Bapi_Quo_Salesrep_Status_Output outPut= obj.getOutput();
//               if(outPut!=null){
//                    List materialList=outPut.getRfq_Status();
//                    if(materialList!=null){
//                      wdComponentAPI.getMessageManager().reportSuccess("materialList="+materialList.size());
          } catch(Exception rfqException){
               wdComponentAPI.getMessageManager().reportException("rfqException="+ rfqException.toString(),true);
    //@@end
public void executeBapi_Commit( )
    //@@begin executeBapi_Commit()
     try {
//       Calls remote function module BAPI_Transaction_Commit
     wdContext.currentBAPI_TRANSACTION_COMMITElement().modelObject().execute();
     wdContext.nodeBAPI_TRANSACTION_COMMIT().invalidate();
     wdContext.nodeOutput1().invalidate();
     wdContext.nodeReturn().invalidate();
     wdContext.nodeReturn1().invalidate();
     } catch (WDDynamicRFCExecuteException ce) {
          wdComponentAPI.getMessageManager().reportException(ce.getMessage(), false);
    //@@end
View Controlloer Code:
public void wdDoInit()
    //@@begin wdDoInit()
     wdThis.wdGetCControllerController().executeBapi();
     wdThis.wdGetCControllerController().executeBapi_Commit();
             IWDApplication wedDynApplication=wdComponentAPI.getApplication();
             IWDApplicationInfo applicationInfo=wedDynApplication.getApplicationInfo();
             Collection collection=applicationInfo.getApplicationProperties();
    //@@end

Hi Gareth,
I was not getting enough time to reply, so replying late.
Actaully the problem was with r/3 BAPI Code itself.
There was condition in the begining of the code to check the data in the workare of R/3, so this condition was failing here.
But when we try to invoke that bapi from r/3 workbench it works fine because the data first comes to R/3 workarea then to R/3 Tables.
But when we insert data from Webdynpro framework , the data directly goes to R/3 Tables rather than the R/3 Workarea. So in Bapi the first condition was failing and no data was getting inserted.
So this was the problem, and we solved it.
Thanks,
Regards,
Aditya metukul

My iPod touch won't turn off. I tried and the turn off slide button in stuck in the of position, but it's still not turning off. It's been a few days please help!!!!

My white 4th generation iPod touchs turn of slide button is stuck on off but my iPod won't turn off for some reason and it only shuts off when the battery dies. It's been stuck like this for some time. Please please please help!!!!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Installing iLife '08 on top of Leopard from Tiger System disk...please help

Hi, I am wondering if anyone can help me.
When I bought my 24" iMac, it came with Tiger and iLife 08 bundled with it.
I just recently bought Leopard and backed up my mac. I then did a low level format on my internal drive and installed Leopard fresh. But didn't realize Leopard didn't have iLife apps on it.
I am wondering if there is a way I can install or move my iLife apps from my Tiger disk or my backup.
I think I had heard of some third party software that would allow you to do this, but can't remember.
Thanks in advance for your help.
Eddy

Perform a custom restore of the iLife applications from the original disk. A Tiger installation DVD which shipped with a Mac includes the iLife applications; retail DVDs do not.
(27108)

Import RFC from SAP System to XI

Hi
It is taking more time ( 5 to 10 mins) to list the RFC from SAPsystem ,When i try to Import RFC from SAP System to XI.
Please let me know your ideas on the same
Regards
Madhan D

Hi,
Could you pls check the following sap notes..
SAP Notes 718320,767091 and 212011 for a better idea on difference in performance while extracting data from R/3 backend.
Regards,
Madhu

Transfer Data from SAP system to non-SAP system

Hi all,
I want to send material no, site and price data from SAP system to non-SAP system. Would you tell me how can I do it
Thanks
Arif
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Oct 16, 2011 10:38 PM

Hi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh

Aattach an existing Excel file to an email from SAP system.

Hi,
How can I attach an existing Excel file from SAP system (Example in 'DIR_TEMP' folder) & send a mail. Guess this requires a class with a method which picks up the file using the file path. Does CL_DOCUMENT_BCS provides this???? boz CL_DOCUMENT_BCS->ADD_DOCUMENT_AS_ATTACHMENT is for Add Existing Document as an Attachment,if so please let me know how with few lines of code??
Thankx in advance.

* Local Data declarations
DATA: ls_rec          TYPE somlreci1.
DATA: lp_send_request    TYPE REF TO cl_bcs,
        lp_document        TYPE REF TO cl_document_bcs,
        lp_sender          TYPE REF TO if_sender_bcs,
        lp_recipient       TYPE REF TO if_recipient_bcs,
        lp_bcs_exception   TYPE REF TO cx_bcs.
DATA: lt_text TYPE soli_tab,
        ls_text LIKE LINE OF lt_text,
        lv_flag.
DATA: lt_tline TYPE TABLE OF tline.
DATA lv_receiver TYPE ad_smtpadr.
* DATA lt_attach TYPE soli_tab.
DATA ls_tline TYPE tline.
TRY.
*   create persistent send request
      lp_send_request = cl_bcs=>create_persistent( ).
* Get the text
      IF iv_stxt IS NOT INITIAL.
        CALL METHOD zfi_flexgl_common=>read_text
          EXPORTING
            iv_stxt   = iv_stxt
          IMPORTING
            et_tline = lt_tline
            ev_failed = ev_failed.
        LOOP AT lt_tline INTO ls_tline.
          APPEND ls_tline-tdline TO lt_text.
        ENDLOOP.
      ENDIF.
* create and set document
*     create document from internal table with text
      lp_document = cl_document_bcs=>create_document(
                      i_type    = iv_format_type   "'XLS' "HTM'
                      i_text    = lt_text
                      i_subject = iv_msg_subj ).
      IF it_attach IS NOT INITIAL.
* Add attachment
*        DATA:      l_size      TYPE sood-objlen,              " Size of Attachment
*                   l_lines     TYPE i.                        " Lines count
*        l_lines = LINES( it_attach ).
*        l_size = l_lines * 255.
        CALL METHOD lp_document->add_attachment
          EXPORTING
            i_attachment_type    = 'RAW'
            i_attachment_subject = 'My attachment'
*            i_attachment_size    = l_size
            i_att_content_text   = it_attach.
      ENDIF.
*     add document to send request
      CALL METHOD lp_send_request->set_document( lp_document ).
* Sender addess
*l_sender = cl_sapuser_bcs=>create( sy-uname ).
*call method l_send_request->set_sender
* exporting
*    i_sender = l_sender.
*      LOOP AT it_rec INTO ls_rec.
      lv_receiver = iv_rec.
      TRY.
          CALL METHOD cl_cam_address_bcs=>create_internet_address
            EXPORTING
              i_address_string = lv_receiver
            RECEIVING
              result           = lp_recipient.
        CATCH cx_address_bcs .
      ENDTRY.
      CALL METHOD lp_send_request->add_recipient
        EXPORTING
          i_recipient = lp_recipient
          i_blind_copy = abap_true
          i_express    = abap_true.
*      ENDLOOP.
      IF sy-subrc <> 0.
        ev_failed = abap_true.
        EXIT.
      ENDIF.
*     ---------- send document ---------------------------------------
      CALL METHOD lp_send_request->send(
        RECEIVING
          result              = lv_flag ).
    CATCH cx_send_req_bcs.
      ev_failed = abap_true.
    CATCH cx_document_bcs.
      ev_failed = abap_true.
ENDTRY.
IF iv_commit = abap_true.
    COMMIT WORK.
ENDIF.

How to consume a web service provided by third party system from SAP system

Hi Friends,
Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system?
Do we get an URL to create a client proxy for consuming the web service?
Thanx in advance,
Ram

Hi Ram,
of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
<soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
which is the actual adress of the service.
An example service can be found here:
<a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
containing the WSDL URL at
<a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
have fun,
anton

SLED date not coming automatically

hi,
As per my client requirement they will enter the production date only in goods receipt and SLED date have to come automatically at GR time. I already maintain the Total shelf life and minimum remaining shelf life in material master.i activated SLED for plant and movement type but SLED date not coming automatically.
If i l enter SLED date more than my Total shelf life period , then system automatically updating the total shelf life period in batch master record. how to avoid this issue? i want whatever shelf life entered in GR should have to recorded not system calculated based on master data(Total-shelf life)
Thanks
Muthuraman.D

Dear all,
i am using internal batch numbers at the time of goods receipt provide me some solution for above issue?.....
Thanks
Muthuraman.D
Edited by: muthuraman d on Nov 7, 2011 12:18 AM

QRFC/TRFC for sending idocs from SAP system to XI

Hi experts,
The standard program RFFOEDI1 generates payment orders - first PEXR2002 and then EUPEXR idocs. These idocs are to be sent to the bank from SAP through XI. Bank partner profile is maintained. But these idocs because of TRFC are not getting sent in the order in which they are generated by the SAP system. So I changed the bank partner profile settings from TRFC to QRFC and gave the rule name as first 16 of mes type. But the idocs are struck in the SAP system. Is there any standard program to be run to send the idocs out from SAP system or is it automatic.
Please suggest a standard method which is to be followed to send the idocs in the same order in which they are getting generated for the scenairo above.
Regards,
Asha

Hi Asha,
As you said Idocs are stucking,
To send Idocs to XI, you must have maintain some settings in XI to receive Idocs. Once they are done properly .in R3 side standard way to send idocs to XI is Maintaining<b> <i>Change Pointers</i></b> and shedule the programe to trigger that most of Standard idocs will have standard programs to catch change pointers and send them to external system.
and to maintain the same order of idocs there is a setting called Quality Of Service in XI side ,that option should be set to Exactly Once In Order .
Regards,
Ramesh.

Source System changes from SAP System to BI Warehouse on ECC activation

We are in the process of building a new development environment from an existing development environment.
After copying from system backup in the new development environment we performed BDLS to map to new source systems. At this point of time the source system for ECC ("SAP System from Release 3.0E" was changed to type "SAP Business Information Warehouse".
Why does this happen?
How can we prevent this?
Thanks for your help.

Hello.
Please check the following note if ti can be helpful to fix this issue.
1087980-ECC Source systems appearing in BI folder
Thanks,
Walter Oliveira,

Unable to send mails to outlook from sap system through workflow

Hi ,
Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
Please find the errors belows that traced from sost t code
02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
Regards
RAGHAVENADAR

Hello,
Actually i checked the mail ID for WF-BATCH using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
ABAPer is sending mails through work flow.
Regards
RAGHAVENDAR M

HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION

HI expects,
HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.

Hi,
In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
IDoc supports only Async communication and in Sync case performace is good using Proxy.
In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
Thanks
SaNv...

Bulk Load into SAP system from external application

Hi,
Is there a way to perform a bulk load of data into a SAP system from an external application?
Thanks
Simon

Hello,
My external application is a C program and I think I want to use IDocs and RFC to communicate with the SAP system.
Simon

Getting error while try to open SAP system from GUI

Hi All,
When I try to open any SAP system from GUI I am getting below dump error message. Please suggest on this.
Thanks & Regards
Surender

Hi Surender,
Is it a general user issue or are you the only user facing that issue ? Does the error occur right after you enter user/password ?
From the GUI session status bar, I see " Memory Low. leave the transaction before taking a break".
This looks like a improper memory configured system. I would suggest that you review your memory parameters as per the SAP note 146289.
If you already have the memory parameters set to at least the values suggested by that note, please further increase the parameters below:
abap/heap_area_total
abap/heap_area_dia
Hope that helps.
Kind regards,
Eric

Data not coming to BW from SAP system from last 7 days....please help

Similar Messages

Maybe you are looking for