In Taxinn Vat in Value not in %

Hi
there is requirement that vat should be display in value not in % while maintain FV11
how we can achieve this ?
I copy JVRD and make value and fix amount B and
then try to maintain Fv11,system giving error message maintain currency,but there is no column of currency in FV11 to maintain it?
Regards
Kailas Ugale
Edited by: kailasugale on May 13, 2011 2:37 PM

Hi
I did it,but system not accepting It
any solution
Regards
Kailas Ugale

Similar Messages

Excise duty values not floating to J1IEX_C

Hi all,
I created a PO with all Excise duties like BED, CESS, SECess etc..
When i try to capture the excise invoice i can see only Ecess and SEcess but not Excise duty( JMOP )
We are using TAXINN and duties were maintaiend thro FV11.
How to fix this.
Pl reply
Thanks
A.Gururajan

Check weather it comming for other material
if not comming
than check
check what is the condition type for 100% bed it would be JMX1
check in po if JMX1 is having value
IF value not there then chec ur tax procedure is the calculation is correct or not
if value coming
check in Maintain Excise Defaults
A/P BED cond should have JMX1
also check Classify Condition Types
TAXINN JMOP BED Set Off condition Percentage
TAXINN JMX1 BED Set Off condition Total
this 2 entries should be there
hope this helps

VALUES NOT GETTING ADDED IN JAVA DICTIONARY

HIII ,
AM DOING AN APPLICATION IN WHICH I AM TRYING TO INSERT VALUES IN A TABLE(CREATED THRU JAVA DICTIONARY), USING EJBS(ENTITY BEAN AND SESSION BEAN) AND COMMAND BEAN..AND WEBDYNPRO....
    AFTER DEPLOYMENT EVRYTHNG IS RUNNING FINE BUT VALUES NOT GETTING ADDED IN THE TABLE...
THE CODE FOR THE "ADD" BUTTON IS :
wdContext.currentEmp_cmdElement().modelObject().add(wdContext.currentEmp_cmdElement().getEmpno(),wdContext.currentEmp_cmdElement().getEmpname());
THE CODE FOR ADD function IN COMMANDBEAN IS
public void add(String empno,String empname){
          try {
                 local.createdata(empno,empname);
               } catch (Exception e) {
                    e.printStackTrace();}
PLZZ DO HELP OUT!!!

The message in simple English just means that "You are doing something really bad" !!! It is absolutely not the communication problem, but understanding problem.
Though you may be executing the same function using SE37 or in the webshop application through JCo, the runtime context is different and without knowing what exactly your Z rfc is doing, it is very difficult to help. To start with, the userid - that is who is running the RFC is different in both situations. In SE37, it is the logon user and in the web, depending upon whether the connection is stateless or stateful, it could be the anonymous ICSS user or the logged in user. Here again, if you have used UME, it is the user id and if you have used ALIAS user, then it is the alias user id. This is just an example. Your runtime context can be different due to many other reasons too.
So, to make this simpler - what is that you are trying to do?
BTW, try not to create multiple threads for the same issue..

Open order value not cleared Message: ORB 015

Hi All,
I have checked and searched for solution before poting this discussion, but not found anything relelvant to my problem.
While closing Project in CJ20N, I am getting an error message as -
Open order value not cleared
Message: ORB 015
It seems issue with incoming orders (sales orders), so I have run CJA1, and in output it is showing Processed object count as 1 but no detail log available for this.
Also in Settlement nothing is appearing to settle.
One thing I observed that one of the sales order linked with Project is rejected.
Can somebody assist me in resolving this issue?
Thank You,
Swapnil Kharul

Hi Swapnil,
There are 2 things you can check here..
1) Is this the first time you are trying to settle incoming orders for the said Project/WBS? I mean did you ever run CJA1/CJA2 and CJ88 post that for this project? You can check this in KE24 report. Check if you find any entries for record type I. If there are any it means settlement of incoming orders is being done.
2) For the said WBS hit Ctrl+F3 and check if there is a settlement rule maintained for Incoming Orders. On the settlement rule screen you will see a button "Incoming Orders". Click on that see if a rule is maintained.
Regards,
Gokul

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Conditions in Purchase Order - No scroll bar/Sales Tax value not in mmr

Hello,
I am stuck in a weird problem where I have created a Condition Calculation Schema, assigned it to Schema group and assigned that schema to vendor, but when i open my condition in the PO, it does not give me scroll bar i.e. I have calculation Schema with around 10+ conditions, but when I try to put all the conditions in PO at one time, the scroll bar doesnot come up and without it, I cannot view all my conditions in the PO. Its saving the conditions though as seen in report, but cannot display it in PO without the scroll bar. Any ideas?
Another assignment is that sales tax value and % should not increase the mmr value at time of GR, but when I do GR its adding the sales tax value to mmr value, my requirement is just Gross price be added to mmr, not sales tax value/%. I tried the Statistical checks in Calculation Schema, but to no vail, at GR the sales tax value is being added to the mmr record. Any ideas?
Lots of points awarded for answer/answers.
Any clue will help
Thank you/Afshad
Edited by: Afshad Irani on Jan 14, 2009 10:27 AM
Edited by: Afshad Irani on Jan 14, 2009 2:32 PM
Edited by: Afshad Irani on Jan 15, 2009 6:19 AM

Q Another assignment is that sales tax value and % should not increase the mmr value at time of GR.
Ans:
Dear Afshad,
Reference to your question, you need to do few settings in your Condition Type and Pricing Schema, if you need Sales Tax value & % not to include in your Material value.
1 - In SPRO, Check that in your condition type, Control data 2 tab, Accruals check box should not be selected.
2 - In your Calculation Schema, against your condition types for Sales Tax % and Sales Tax Value, select the check box for Manual & Statistics.
3 - Also in your Calculation Schema, you should not select any account key in AccKey (Account Key) and in Accruals colomns.
If any one of these setting is not defined, the valuation price for your material will be increased due to the fact that your settings for Condition type and Calculation Schema is allowing the same to hit the value of your material directly.
Hope it works for you.
Regards
Jibran

Subcontracting challen po net value not come in challen

Hi
While I taking print of subcontracting challen po net value not come in challen
any reply
Regards
Kailas ugale
Edited by: Csaba Szommer on May 9, 2011 10:36 AM

Hi
check this link it may helpful to you
same question was put by me in forum some day ago
[net value not coming in subcontracting challen|subcontracting challen print;
Regards
Kailas ugale

EVDRE- Child member values not rolling up to Parent

Dear Freinds,
I am using 4 Hierarchy in Account DIM. I am facing a problem that for second hierarchy child member values not summing up to Parent.
Dimentioned processed sucessfully.
Thanks ! in advance.

Have you recently implemented EHP1?
If so there is a common issue with the hierarchy tables - refer to OSS note 1139396
Hope this helps

Dashboard Prompt using values not from the table

Hi,
I have a requirement from the client to design a dashboard report like the following.
Dashboard prompt will have 4 filters, three filters come from the table, but the fourth filter will have 3 values not from the table. The fourth filter will have values like "Report with Sales Amount", "Report with Purchase Amount", "Report with both Purchase and Sales". I have three different Table reports designed for each of the fourth filter choices. But how do I implement it, both in the dashboard prompt as well as navigating to the rite report based on the selection.
Is my approach correct.
Thanks for your time and help.

The fourth prompt where you have "Report with Sales Amount", "Report with Purchase Amount", "Report with both Purchase and Sales" you pull a dummy column into the prompt and write a sql in show.
would be something like
SELECT Case when 1=0 then "Dimension- Customer"."Cust Name" else 'Report with Sales Amount' end FROM Sales UNION SELECT Case when 1=0 then "Dimension- Customer"."Cust Name" else 'Report with Purchase Amount' end FROM Sales
and in the prompt set a presentation variable say var_criteria
Now create report2 for with a some randomn column and another column will have the values that you want to display for example 'Report with Sales Amount'
Create a filter on the 2nd column and reference the presentation variable var_criteria and default it to 'Report with Sales Amount'
On the dashboard page in the section place the report and enable guided navigatoin by selecting report 2.
Please let me know if you have any questions.
thanks,
deep

Contract value not updated in open order value of credit management

My requirement is i have created the contract and activated the credit management by assigning credit group to contract document type, In item category the credit is active and in pricing subtotal is also assigned .
But when i create the contract , the open order value is not updated .
i do not want the credit to be active at order level.
Dear guru's
please let me know where i am going wrong
thanks in advance

hi,
open sales orders value not updating currectly in sales value of CM
http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditmangementIn+SD-FI
i think you have to run a report which is under the link number 1.
regards,
balajia

Statistic condition values not updated during Sales order Settlement

Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
Thiru

Hi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh .

How to enter value not included in LOV

When I use an LOV, I'd like to be able to key-in a value not in the LOV. Can I get there from here?

I'm beginning to wonder if this is possible, since LOV's are built with 'display' and 'return' values and a dynamic user keyed value doesn't have a corresponding 'return' value, eh?
So... can anyone verify for me that LOV's will ONLY accept values existing on the LOV at time of population? If so, is there another way to provide a list of potential selection values while still providing the option of a user key-in not found on the list?
hm-m-m-m?? ;o)

MSS UWL WebDynproApplication value not found ...

Hello,
I am using MSS and would like to approve recorded times. But when I configure the UWL there is a problem with registering the object tpys:
WebDynproApplication value not found for task TS00700049 in system SAP_ECC_Financials
Portal Component value not found for task TS00700059 in system SAP_ECC_Financials
Could someone tell me please what this could be and how I can fix it?
Thx, Vanessa

Hello Siddharth Rajora,
thanks for your answer. I will try it out in the next days.
Could you tell me which which values I should set for the parameters?
Thanks,
Vanessa

Shared Variable Initial value not licenced error with cRIO

Hello Everyone,
I've a project that will be deploed on cRIO. This project was created on a different machine and didn't have any error regarding the shared variables. when I transfered the project to the computer connected to the cRIO, I have this error with all shared variable. The error message says that:
1. Initial Values: Not Licenced or can't be edited outside of LabVIEW.
2. Logging: Not Licenced or can't be edited outside of LabVIEW.
attached are two images for the error i have.
Can I have help with this issue?
Thanks in advance
Attachments:
1.png ‏134 KB
2.png ‏142 KB

Good day,
Sounds like you are using the DSC module features on your code and you forgot to activate the runtime system on that machine. If you have access to the NI License Manager, please check the status of the license.
We need an active license for the second message but, for the first one you can try to program your own initial values for all of your network-published shared variables by initializing whenever the PC is started. During the initialization portion of your code, you can just write a constant value to the shared variables so the values are the same initial values every time it is run.
Regards,
Alejandro | Academic Program Engineer | National Instruments

Excise consdition value not flowing inot the invoice

Dear Gurus,
Excise condition value not flowing in to the invoice from sales order
Thanks
Sasi

Dear lakshmipathi,
Iam entering the BED/Ed/ShEd values manually....
Where can I check the Tax code in the sales order?Does you mean to say the Tax classification at Item-Shipping tab?
Thanks
Sasi

In Taxinn Vat in Value not in %

Similar Messages

Maybe you are looking for