In TestStand, How do I pass variables to a sequence, other than the standard Input Buffer?

I have Labview VIs that have arrays as inputs, I want to pass information in that array to the VI. TestStand already has the Input Buffer setup, but how do I create more input buffers, like array input buffers?? I know that the "Parameters" section in the sequence file is for passing info to subsequences, but that does not help me, Thank you in advance!!

See the TestStand shipping example located in the directory \Examples\AccessingArrays\UsingLabVIEW. This will show you how to pass arrays back and forth from a VI to a sequence variable.
If you are trying to create a step that handles arrays, then you will need to create a new step type that has an array step property. There is an example on the NI web site of a step type that handles arrays. Go to www.ni.com/support and search the Examples Program database using the search string of:
+"step type" +waveform +teststand

Similar Messages

How do i install reader to a drive other than the boot drive?

how do i install reader to a drive other than the boot drive?

Hi nicksdaddy,
There is an offline version:
http://get.adobe.com/reader/enterprise/
Hope that helps!
Stacy

How to enable remote debugging for a session other than the current one

Hi all,
I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
The docs indicate that I should be able to do so:
dbms_debug_jdwp.connect_tcp(
host IN VARCHAR2,
port IN VARCHAR2,
session_id IN PLS_INTEGER := NULL,
session_serial IN PLS_INTEGER := NULL,
debug_role IN VARCHAR2 := NULL,
debug_role_pwd IN VARCHAR2 := NULL,
option_flags IN PLS_INTEGER := 0,
extensions_cmd_set IN PLS_INTEGER := 128);
But when I try (even as sys), I get the following:
exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
00022. 00000 - "invalid session ID; access denied"
*Cause: Either the session specified does not exist or the caller
does not have the privilege to access it.
*Action: Specify a valid session ID that you have privilege to access,
that is either you own it or you have the CHANGE_USER privilege.
I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
Regards,
K.

How to install PS CC to a SSD other than the boot or "C" SSD.

I want to install PS CC, Bridge CC, and Lr CC to a SSD other than the boot or "C" SSD.
How to do that?
Problem is, CC Set-Up automatically installs these apps to my boot or "C" SSD.

I signed-out of PS; and deleted PS, Bridge, Lr, and Creative Cloud. The, when I download (i.e., saved) Creative Cloud Setup to my "A" drive SSD, then double click to install Creative Cloud, "it" automatically installs the Creative Cloud app to my "C" SSD.
The app does not ask where I want to install Creative Cloud.
I keep looking for an opportunity to "change the default install location" but I do not see such an opportunity.
Previously, when I installed PS there was no opportunity to "change the default install location."
Can you tell me how to find or force an opportunity to "change the default install location?"
Where or how do I find "the CC app settings?"
Does Abode have a manual install version for Creative Cloud, PS, Bridge, and Lr?
FYI, my OS is Win 7 pro 64 bit.
Also, why does Adobe automatically install a 32bit version of PS on my system?
Can I prevent that?

How do you receive iMessages from a device other than the iPhone they originally are being sent to?

I'm trying to receive iMessages from a phone other than my own. How do I receive them, I have both Apple IDs and both passwords but do not have current access to the phone I'm trying to get the iMessages from.

Do you have the other phone's Apple ID active in your iPhone iMessage setting? If not, then you would not get them. And, the person sending the iMessage would have to be sending to the Apple ID and not the phone number.

Yahoo displays in line form other than the standard Yahoo screen, How do I change this and why does it keep changing on its own?

I have Yahoo as my default search engine. When I enter through FireFox the display comes up as a line display instead of the standard Yahoo Screan with photos etc. I need to know what is causing this to happen and how to change it back? when Yahoo is accessed through other browsers this is not a problem. Any suggestions?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How do programatically set focus on a record other than the first one in a block?

My form performs the query for the block, and by default it leaves the focus on the first (top) record in the block. I'd like to have it focus on the last record in the block upon initial query.
i've tried Last_record and go_record in a post-block trigger but these builtins are restricted and you can't execute them from post block triggers. i don't see any block property things that would influence this either... how can i do it? thanks.

i just figured out the answer to my own question... in the when new block instance trigger, there's an execute_query statement, and i simply put last_record statement after that...

How do i purchase music from a country other than the one i'm in

i live in the usa and i want to purchase music form the greese itunes store. I don't have a credit card registered in greece. Is it possible to purchase and download from a different country? How do I do it? or how do i contact apple to ask this specific question/
thanks

This question is asked frequently so I'll just quote the most succinct answer (courtesy of Dave Sawyer) from the many given:
In order to buy from any given country's iTunes Music Store, you must have either:
a) a credit card with a billing address in that country, or
b) a mailing address in that country and a gift certificate or a prepaid card that was bought in that country.
If you cannot fulfill one of these two sets of conditions, you will not be able to purchase from any given country's iTMS.
.......this is due to restrictions placed on Apple by the record companies and other rights holders (who are often completely different from country to country and so all require their own individual negotiations and contracts), not by Apple's choice. And this also applies to all the legal download stores that carry major-label content, not just the iTMS.

How to park an invoice with a vendor other than the PO vendor ?

Dear all,
Can anybody pl give an idea about how i can park an invoice for a vendor which is different from the PO vendor ?
regds
amitava

hi
go to MIR7
here give all detials then in details tab change the po vendor to any other and save

How to disable iTunes Match on a computer other than the one with my main library?

I have iTunes installed on a home MacBook for syncing music, photos etc and iTunes on a work PC to sync calendars and contacts. iTunes Match is enabled on both. However, I'd like to disable it on my work PC as it slows down my iTunes when I open it up. When I click "Disable iTunes Match" in the store link in iTunes on my work PC, it appears to want to disable the service universally. Is this only disabling it on this one device, or universally? Thanks.

Thanks... took over an hour to turn off the iTunes Match, but it did not effect my home iTunes.

How do I update Firefox to a version other than the latest one?

As you can see from the troubleshooting information, I am several versions behind the latest Firefox. I am wondering whether an update would make Hotmail work on Firefox again and make it faster. However, Firefox Auto Updater is set to install the latest version, so I have to keep refusing it permission because: a) Character Palette isn't compatible with it; b) Last time I looked, there was no fix to turn off that infuriating swear word censor in the latest version. Is there any way I can get a version that is newer than my current version, but doesn't censor anything I choose to type and lets me use Character Palette?

try the alternate and easiest way by downloading from here
* getfirefox.com
simply run the installer, you can install on top of current version or you can remove the current one if you wish

How do you restore IPhone to a backup other than the most recent. Phone crashed, restore didn't work.

My iPhone 4 crashed and I did a restore, but instead it set it up as a new install. So when I went to do a restore, I still lost all my contacts and apps. Need help restoring using a precious backup.

control + click(mac) or right click(windows) on the name of your iPhone on iTunes then select restore from back up
_if you have multiple back up, it will give you option which back up to restore

How do i get siri to set a reminder for a time other than the appt time. For example: I want Siri to remind me at 10:00 pm on Monday that I have a dentist appt. at 9:00 am on Tuesday. She screws up the dates and times no matter what I say

What I can't figure out is how to set a reminder for a time other than the appt time. For example: I want Siri to remind me at 10:00 pm on Monday that I have a dentist appt. at 9:00 am on Tuesday. She screws up the dates and times no matter what I say

"Remind me at 10:00 pm on Monday". Siri: "Ok, just tell me what you want to be reminded about". "I have a dentist appointment on 9:00 am on Tuesday". Siri should set it up correctly.

Passing variables from php to flash and the opposite

Hi guys, im trying weeks now to solve this problem but nothing yet
If someone could just tell me how to pass variables from flash to php and the opposite i would be thankful!!! Please help!

I have recently had to learn this, so this may not be the best way but it worked for me
I suggest looking at the code below stripping out everything you don't need (e.g. the databse stuff) and just get a simple string going back and forward
have a go and post any problems here and I'll try and help
in flash i have
private function getBalanceAndXP():void
          var request:URLRequest = new URLRequest("utils.php");
          request.method = URLRequestMethod.POST;
          var variables:URLVariables = new URLVariables();
          variables.func = "getBalance";
          variables.fbid = userID;
          request.data = variables;
          var loader:URLLoader = new URLLoader();
          loader.dataFormat = URLLoaderDataFormat.VARIABLES;
          loader.addEventListener(Event.COMPLETE, onBalanceComplete);
          loader.load(request);
private function onBalanceComplete(e:Event):void
          var loader:URLLoader = e.target as URLLoader;
          loader.removeEventListener(Event.COMPLETE, onBalanceComplete);
          var variables:URLVariables = new URLVariables(loader.data);
          _balance = parseInt(variables.balance); // class variable
          _experience = parseInt(variables.experience); // class variable
public function setBalanceAndXP(balance:int, experience:int):void
            _balance = balance;
          _experience = experience;
          var request:URLRequest = new URLRequest("utils.php");
          request.method = URLRequestMethod.POST;
          var variables:URLVariables = new URLVariables();
          variables.func = "setBalance";
          variables.fbid = userID;
          variables.balance = _balance;
          variables.experience = _experience;
          request.data = variables;
          var loader:URLLoader = new URLLoader();
          loader.dataFormat = URLLoaderDataFormat.VARIABLES;
          loader.load(request);
and then I have my php file
<?php
$func = $_POST["func"];
$fbid = $_POST["fbid"];
$balance = $_POST["balance"];
$experience = $_POST["experience"];
$numVariables = 0;
$link = mysql_connect("localhost","username","password");
mysql_select_db("databaseName");
if ($func == "getBalance")
          getBalance($fbid);
else if ($func == "setBalance")
          setBalance($fbid, $balance, $experience);
mysql_close($link);
function getBalance($fbid)
          $query = "SELECT balance, experience FROM tableName WHERE fbid = '".$fbid."'";
          $result = mysql_query($query);
          $row = mysql_fetch_row($result);
          writeVariable("balance", $row[0]);
          writeVariable("experience", $row[1]);
function setBalance($fbid, $balance, $experience)
          $query = "UPDATE tableName SET balance = ".$balance.", experience = ".$experience." WHERE fbid ='".$fbid."'";
          mysql_query($query);
function writeVariable( $name, $value )
          global $numVariables;
          if ( $numVariables > 0 )
                    echo "&";
          echo $name . "=" . urlencode($value);
          $numVariables++;
?>

How can I pass multiple condition in where clause with the join table?

Hi:
I need to collect several inputs at run time, and query the record according to the input.
How can I pass multiple conditions in where clause with the join table?
Thanks in advance for any help.
Regards,
TD

If you are using SQL-Plus or Reports you can use lexical parameters like:
SELECT * FROM emp &condition;
When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
SELECT &columns FROM &tables &condition;
But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
Best of luck!

In TestStand, How do I pass variables to a sequence, other than the standard Input Buffer?

Similar Messages

Maybe you are looking for