In the finder, in devices where the pen name appears. I dragged to the desktop and now whenever I put my pen can not find it. but I know it is connected because when shooting says he was ejected.
in the finder, in devices where the pen name appears. I dragged to the desktop and now whenever I put my pen can not find it. but I know it is connected because when shooting says he was ejected.
I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.
Similar Messages
-
Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1591 -
Windows 7 desktop and AEBS-OK, old Windows XPpro laptop Can't find it?
New Dell Desktop running Windows 7 ( what a mistake I made....) finally configured to work wirelessly with the Airport Extreme. Even printer hooked up to USB port works ( finally) 2 iPhones see the network and conncet immediately but old IBM laptop running Windows XPPro doesn't even see it when right on top of it ? help?!
Is there a solution? ThanksHello wiwmd. Welcome to the Apple Discussions!
Is your AirPort Extreme Base Station (AEBS) the older 802.11b/g (domed-shaped) or newer 802.11n (square-ish) model? Regardless of model, which wireless encryption standard: WEP, WPA, or WPA2 are you using? Finally, which Service Pack level is your XP Pro running: SP1, SP2, or SP3? -
help plz
Check out this recent thread and see whether that works for you: [https://support.mozilla.org/questions/1012315 when using restart firefox you get a folder on the desktop called old firefox data i need to know how to use this folder to get my old firefox preferences back].
When you are done using the "old" profile you can switch back to your current profile by going back through the Profile Manager.
You might be tempted to use the Delete Profile button to clear the temporary profile. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. -
After installing Adobe Flash Player 11.6 The player will not work and i can not find it installed
After downloading and installing Adobe Flash Player 11.6 on my HP Laptop w/ Windows 7, The player will not work. Every time i click on a video it tells me that i need to install Adobe Flash Player. I have followed all the trouble shooting steps on the Adobe site, I have uninstalled it and reinstalled it again and still it does the same thing...In Adobe trouble shooting steps where it checks to see if there is another Adobe Flash Player installed on my computer, it can not find where there are any installed....so what do i do???
What is your browser? If IE:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968 -
I have the calendar app came with my phone but I can not find I to the homescreen
i use the calendar almost everyday and it is a pain as I can not find it on the homescreen yet when I search for it I can find it pplease help I really dont know what to do
It cannot be lost it came with the phone. look on another screen or in a folder. IF you cannot find it then go to settings/general/reset/reset home screen layout
-
I bought a HD and the Itunes Stores say that the movie (Pretty Women) has Itunes Extras. Why I can not find it? It is a mistake from Apple? What happen if I buy the movie because the Extras and now I can not watch it? I have an Ipad last generation.
What version of iOS do you have on your iPad (Settings > General > About > Version), and is it connected to wifi ?
From Buy and play movies with iTunes Extras - Apple Support :
Here’s what you need to stream the new iTunes Extras:
Mac using OS X Mavericks v10.9.3 or later and iTunes 11.3 or later
PC using iTunes 11.3 or later
Apple TV (2nd and 3rd generation or later) using Apple TV software 6.2 or later
iPhone, iPad, or iPod touch using iOS 8 or later (You need to connect to Wi-Fi. Extras won't appear if you're connected to a cellular network.)
An active Internet connection
You can use the steps below on your Apple TV, Mac, PC, or iOS device for any purchased, HD movie that features Extras:
On your Apple TV, select Movies, then select your movie to see the Extras menu. Extras aren't available from the Computer tile on Apple TV (Home Sharing).
On your Mac or PC, open iTunes and go to the Movies section in your iTunes library. Double-click your movie. If there's no Internet connection, the Extras menu will be skipped. The movie will immediately play if you already downloaded it.
On your iPhone, iPad, or iPod touch, tap the Videos app, then tap your movie. If you're connected to the Internet via Wi-Fi, the Extras menu will appear. -
Hi. I have updated my computer to Windows 8.1 and now suddenly my Apple TV can not find the computer, it says "turn on the home sharing". Both of these are on, iTunes and Apple TV, what to do? It was working perfect before update.
Thanks in advance.Make sure the firewall and wifi router is not blocking it you can likely see if its the wifi router by connecting by etherent cable that would mean itsopen in terms of ports
-
I can't find iMovie on my mac any where though it says on the app store it is installed I can not find it to open and use, someone help ?!
Welcome to Apple Support Communities
Open a Finder window, select Applications in the sidebar and look for iMovie. Make sure there are no external disks connected, and if so, disconnect them, open the App Store and install iMovie.
You can also use Spotlight to look for iMovie, so press Command and Space keys and type iMovie -
Trying to sync another computer to sync, but going from Tools to Options to Sync I can not find the Add A Device choice. have looked everywhere but can not find the frame that allows me to enter the codes from the second computer. Have installed the sync function on the first computer and have received a sync key.
What am I missing and where do I find "Add A Device"?Thanks for trying to help solve a problem in Foxfire's sync function. I guess I haven't done a very good job describing the problem so I'll try again.
My desktop computer is running Windows 7 and Foxfire 6.0. I had no problem establishing a sync account and obtaining the Foxfire Sync Key. Now I would like to sync my Asus Eee Transformer Tablet running Android 3.2 and Foxfire 3 (for Android). On the tablet I go to Sync, then Connect, and get the three-box code to be entered on the desktop computer where the sync account was established. So far, so good.
I then go back to the desktop computer and in Foxfire click Tools, then Options, then click on the Sync symbol, then click on Set Up Foxfire Sync, which is the only option available. I am then taken to a page with two options: Create A New Account, or Connect. sunce I have already created an account I click on Connect. I then get a page with a three box code and am told to go to the other device (the tablet) and select Add A Device. Unfortunately, on the tablet the only choices available are Sync and connect, which returns a three box code. No where can I find a page or an option fo Add A Device and enter the three box code.
So, in summary, I can not find w page to Add A Device and enter the three box code on either the desktop computer or the tablet. If all else fails, I guess I can go back to day one and establish a new sync account on the desktop computer, or completely give up on the sync, which is a nice feature but one that doesn't work. -
I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?
Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
Many thanks. That issue will be causing the iTuneshelper error message too.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful but I can not find the files on the mac. Any ideas?
When you use Migration Assitant it creates another user account and puts your files there. Please log out of your normal account and log into the new account. Had you use Setup Assistant when it asked if you were migrating that would not have occured. You have a couple of options, combine the two accounts (not recommended) or start over, use Setup Assistant and have everything in one user account. Here is a link to Pondin's guide for Lion Setup Assistant tips however if you want to combine the two accounts he has addressed that in
http://pondini.org/OSX/Transfer.html -
i am trying to authorize my lenovo lap top to be able to download my purchased songs from itunes.
the instructions seem simple enough open itunes store click on "authorize computer"
i can not find that instruction any where within the itunes menuPress the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(90835) -
Hello,
I need help before i go to the apple store for help.
My problem is that I have an Ipod touch which it was working fine but now it will not boot all the way.
It will not show the red bar when is ready to be turn off or reboot when using both buttons to reset it it will only come to the apple logo then goes blank.
I tried to restore via Itunes but same result, it will start showing is doing the extract then it will go blank and get a message saying that It can not find the device.
What do i need to do.
Thank you for your help.
regards,
Mario
PS. The OS I am not sure do not remember exactly.- Reboot the computer
- Try another USB port
- Try another cable try another cable
- Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
JukkaHi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.
Maybe you are looking for
-
Fields in the parameter trans., of OB52 are not in the same order as OB52
Hi All, I have created a Parameter transaction for the OB52 transaction. When i execute the transaction the "to account" field is showing before "From account" field. where as in OB52 "to account" field is present after "From account" field. How can
-
I recently updated my iPhone to iOS5 and it worked o.k. Then I updated my wife's iPhone and it loaded all my data (pictures, phone numbers, etc.) to her phone. All her data is gone. Is there a way that we can re-load her data?
-
I have a question about when I create a new contact on my phone and take their picture for the contact info. When they call me the picture is the entire background and not a small thumbnail. I know that I can take the photo of the person then later d
-
Detection Methods for Microsoft Office
Hi Guys It seems the most common detection method for deploying Microsoft Office (in particular for me Office 365 pro plus) is the existence of 'Office15' in %program files%\Microsoft Office 15\ However my concern is that what if some other Office 20
-
Doubt about preferred or available service.
I have a doubt about preferred or available service. I have a Oracle RAC with 3 nodes. I created a service GL, but I didn't setup available instance, only preferred instances with 2 instances (PROD1,PROD2) srvctl add service -d PROD -s GL -r PROD1,PR