In which order have i to restore my catalog:start whith full backuo, then 1st, 2., 3., ... inkrementelle backup or start whith 3. inkrementell, then 2., 1., an finally full backup?
In which order have i to restore my catalog:start whith full backuo, then 1st, 2., 3., ... inkrementelle backup or start whith 3. inkrementell, then 2., 1., an finally full backup?
Andaleeb,
Thanks,
I think your answer about the order of incremental backups for restoration should be included in the link you provided.
The only hint about that is :
" Note:
If you selected Restore From CD/DVD, Elements Organizer prompts you if more than one disc is required to restore a catalog. Follow the onscreen instructions, which differ depending on whether you’re restoring a single backup set or a single backup set plus one or more incremental back ups."
Especially because starting from the most recent incremental backup is exactly the contrary to what most users would expect.
Following onscreen instructions is good, but when those instructions go against what is expected... .
Similar Messages
-
Software update says I need to download MacOS 10.6.7. Each time I try, I have tried 6 times, the software downloads, it has me restart the system, it then writes the files to disk and then I get an error measage that "there was error in installing the softare. Anybody have this problem and how do you fix it? I am running 10.6.6
Try this before trying to install the update.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you still have a problem then I suggest you download the 10.6.7 Combo Updater and install it. -
I am trying to unlock my phone - this required me to download itunes onto a friend's PC in PNG. Now it won't restore the phone (which I have to do in order to unlock it) without downloading this 800Mb file, which will cost me approx AUD$200. Help.
Are there any other options out there?Nope. You need an .ipsw file to restore your phone & since your friend didn't have iTunes, obviously there is no current .ipsw file to use. You can go to an Apple store, use your own computer, find another computer, but you can't restore without a current signed .ipsw file.
-
RESTORING: At the moment I am downloading a movie on the itunes store my 8GB ipod touch (not my computer) (which I have already paid for) and I need to restore my ipod. Will restoring it stop/delete my downloading movie? what else does it delete?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
When you restore via iTunes iTunes will download the firmware(ipsw) file. It could be that the microwave damaged the iPod and iTunes does not know what it is. -
I, sadly like so many others, updated to the bug filled 5.0.1 and my phone had an error. I got the little link to iTunes and nothing else on my phone after it shut down. Once I did that I have an option to set up as a new phone or restore to my last sync (earlier in the day). I have run the restore three times and each time the phone goes through and shuts down. When it turns back on I have signal, 3G, contacts, text history, calendars, and photos as well as a few apps. Most of my apps are gone and my music library is empty. When I link the phone back to sync I get the same message as initially, that I need to set up as a new phone or restore.
I don't have time to go to an Apple Store to get this worked on and I'm pretty disgusted that Apple has been virtually silent on this matter. Most of the answers I have seen to the various problems people are reporting are coming from other users.
If anyone out there has an idea for me to try, please share. Apple if you're reading this you NEED to do something ASAP because I was planning on getting a new phone after the holidays but if I have to get one now it may not be another iPhone (which this is my third version of over the past 4 years) as I'm not spending the money on myself right before the holiday so it'll be free/discounted phone with updated contract for me, and we know Apple doesn't do that!!iTunes places the .ipsw file here:
OSX:
~/Library/iTunes/iPhone Software Updates
XP:
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
7 &Vista:
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
Find and delete any and all .ipsw files on your computer. There should only be one, but delete all that you find. Next, disable ALL firewalls & security software on your computer. Connect your phone, iTunes running & restore from backup. Follow this by syncing your content back to your phone.
This will force iTunes to re-download the .ipsw file, as I suspect yours is corrupt. -
How to find out which formulas have been used in sales orders of a period
Hi Experts,
I am trying to find out how much my users actually use the formula and average pricing. Therefore, I am trying to build a quick viewer by relating tables. In order to use the F&A pricing, they use one particular condition type ZFA1. By linking tables vbak and KONV via KNUMV, I can see in which orders they have used ZFA1, but I also want to find out which Formula they have chosen from the repository. As this is visible for the user from the sales order, there should be a table that stores it, but I cannot find it. Does someone know the table and can help me on this topic?
If you provide the solution, I will definitely give you the reward points. Thank you in advance!
Greetings
PetraHi Petra,
Please try to check the table OICQ7 with KNUMV from VBAK.
KR,
Sergey -
Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off. Please help.
Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.
-
I'm getting a User Cannot be Authenticated message when trying to order photo cards, books, etc - which I have done successfully many times
In your account in the Apple store (store.apple.com) reenter all of yoru information and be sure one click ordering is on -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
and try again
LN -
I am using the trial version of CC and cannot get the auto blend layers working despite following many videos on youtube etc. I have selected all layers but no matter which order I select etc all I get is an output of the first file in the stack - help!!
<moved from Adobe Creative Cloud to Photoshop General Discussion>
-
i have tried to restore my phone which isnt working, ive followed a few tips as to upgrade new version but it still isnt working.
i just get a itues and usb cable symbol when i try to turn my phone on??See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified / Hacked / Jailbroken... this will Not necessarily work. -
I have the latest Creative Cloud versions of Lightroom and Lightroom Mobile on my Ipad. On my desktop I have created a collection which I have put in a custom order. On my Ipad I go into that collection and set the order to custom order, which I presume means the order I have on my desktop. However, the photos on the Ipad seem to be just random photos from the collection THEN the rest of the collection is in the correct order after that.
Do you have virtual copies in your collection?
Could you please send send me a LR Desktop +Mobile diagnostig log - best as a private message with a downloadable dropbox link
You can trigger the Lr Desktop diagnostig log via LR Desktop preferences -> Lightroom Mobile and when you hold down the alt key you will notice a generate diagnostic log button.
The Lr Mobile app log can be triggered when you open up the settings and long press the to LR Icon a diagnostic log will be generated and attached to your local mail client. While opening the settings could you double check if you are signed-in?
Thanks
Guido -
after restoring my iphone 4,it went o and i haveto restore it again,but this time,there are errors like,error 21.which i have trie fixing several times.what do i do,its so frustrating.
Hi ..
Help for error 21 > Resolve iOS update and restore errors -
I backed up to the cloud and then Apple gave me a new phone which was IOS6. How do I restore from Cloud to my new phone which I have just updated to IOS7 please?
Grateful for any suggestions.Hi kattaylor49!
I hope you are enjoying your new phone! Here are the steps to restore your content:http://bit.ly/1z5kb40.
Thanks,
AyaniB_VZW
Follow us on Twitter @VZWSupport -
I'm trying to restore my MacBook Air but it tells me I need to purchase OS X mountain lion which I have but it says I haven't and I obviously can't put a disc in because MacBook Airs don't take discs. What do I do?
Thank you Terence for your help. I was able to restore my backup from my time machine ext drive to a new 1tb seagate ext drive. so i felt sort of ok. but yesterday that older ext drive i used for time machine wouldn't open! i called applecare and they trouble shooted with me and said it's probably a goner and data is probably corrupted. it's only a few years old and i'm very careful with it. my husband accidentally dropped my new drive last night -- i know, unbelievable, i was SO upset, poor guy -- but I'm so stressed with all of this. i have 10 years of photos and videos. so now i only have the one newer drive with a backup. i have to buy another one today to backup again so i at least have two backups. i tried to delete a ton of files last night to free up the 30 gb of space i need to get my full library back on my mac. i have 90gb free and deleted 7 years worth of photos i had on picasa that were in my "pictures" folder and also a ton or random photos and videos i had in that same pictures folder and thought that would give me the 30 gb but it hardly freed up any space at all! do you know why that is? all of this stuff is really a pain and really stressful. thank god i did have a backup in the first place but now i am panicked the one i have left will somehow crash. especially after my husband dropped the drive lastnight! it didn't fall far and fell onto a wood floor and seems fine, but after my older ext drive crashed yesterday -- and i lost my entire iphoto library a fewweeks ago off my mac -- i feel cursed. any answers you have would be great. thank you.
-
HT1212 how to disable the ipod nad restore the passcode which i have forgotten
i want to know how to disable my ipod and restore the passcode which i have forgotten
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
Unable to apply GPO on 209 clients (RPC Issues)
I am in the process of cross forest DC migration with an environment of 400 users, first I have configured the GPO to add the dns suffix search domains to the current clients of the old domain however upon applying policy I get The RPC server is unav
-
Can a 200 mb pdf nitro be converted in word document in trial version of acrobat XI pro
can a 200 mb pdf nitro be converted in word document in trial version of acrobat XI pro
-
Dynamically loading text into SWF
I'm building a flash web site and here are a couple parts of the site the client is going to want to update regularly. Is there a simple way that I can have an external file (XML?) that a client can edit to update parts of the site without having to
-
Cant Rotate First Page of ANY pdf
I can no longer rotate the first page of ANY pdf. If I try to rotate all pages, every page but the first will rotate. If I try to rotate only the first page I get a message saying "Invalid Page Range". I've been using Acrobat for years and never had
-
hi, I am using a custom workflow. the task is called in UWL and there is a Z-report called with SAP-GUI HTML. so a window pops up, inside there is the z-report for approval of the workflow. then the user closes the sap-gui-html window. so far so good