In which package we ll find length field

in which package we ll find length field

length field for what????
int arr[] = new int[10];
System.out.println(arr.length);???

Similar Messages

  • VBMTV-PREIS2; in which table can I find this field?

    Hi,
    Does anyone know in which table I can find the field PREIS2 that is used in structure VBMTV?
    Thanks!
    BR,
    Linda

    Check in the table DD03L.. You will get the table name.. just give this field name in the contents of the table...
    Assign points if it helps...
    Khaja

  • Could anyone tell me in which tables could I find the field DMSHB?

    Hi All
    Could anyone tell mein which tables could I find the field DMSHB?
    It's managed in the t.code f-32
    Thanks

    Hi,
    find the below tables;
    BWPOS
    DSKOP
    J_1AOIFWVL
    MHND
    RFASLD11B
    TBKOW
    TZIN3
    Thanks

  • In which package would I find the recalculate payment due date logic

    In R12 Invoice Workbench screen when you change certain fields the payment due date is recalculated.  I want to look at the logic behind that functionality.  I am looking at the code for the form but struggling as I haven't looked at Oracle forms in years and never anything this complex.  Can someone point me to the pl/sql package that contains the logic?  Thanks!

    The information comes from multiple tables.
    But you can get most of the information from mtl_material_transactions. It will give you transaction date, type, subinventory, quantity, uom , transaction value
    You will have to join the record with po tables to get PO#
    Hope this answers your question,
    Sandeep Gandhi

  • 0FC_PAY in which support package Can I find it?

    Hello gurus!
    I need the 0FC_PAY datasource, for ISU , but I dont know in which support package can I find it?
    Somebody can helpme please
    Thanks a lot

    When logged onto ECC, go to menu option System > Status... In the section SAP System Data the component version field should provide you with the Enhancement Package, or EHP, level that you're at.
    To find the BI Content version, while in the System: Status screen, click on the magnifying glass next to the Component Version field. There should be a component called BI_CONT. That needs to have a minimum release of 704. The level, which is irrelevant for what you're looking for, is the Support Package level for that component.

  • From which tables i would find the delivery and billing document field..??

    I need to create an ALV report which displays the following details in the output.
    Order No  Item No     Material     Order Qty     Item Category     Plant     Delivery     Billing Document     Sales Org     Dist Channel     Division     Created By     Created On      Changed On
    For(Order No  Item No     Material     Order Qty     Item Category     Plant) i took the fields from vbap and
    for(Sales Org     Dist Channel     Division     Created By     Created On      Changed On)i took the fields from vbak..
    From which tables i would find the delivery and billing document field related to sales document.??
    need help...
    Moderator message : Requirements dumping not allowed, thread locked.
    Edited by: Vinod Kumar on Mar 6, 2012 2:53 PM

    i am new to abap...so i dont have idea about sd table relationship.
    so please reply how to add delivery and billing doc in my coding below..
    *& Report  ZINAA_SD
    REPORT  zinaa_sd.
    TABLES: vbap, vbak, vbfa.
    TYPE-POOLS: slis.
    CONSTANTS: c_x TYPE char1 VALUE 'X'.
    TYPES:
            BEGIN OF st_vbap,
             vbeln TYPE vbap-vbeln,
             posnr TYPE vbap-posnr,
             matnr TYPE vbap-matnr,
             pstyv TYPE vbap-pstyv,
             kwmeng TYPE vbap-kwmeng,
             werks TYPE vbap-werks,
            END OF st_vbap,
            BEGIN OF st_vbak,
              vbeln TYPE vbak-vbeln,
              erdat TYPE vbak-erdat,
              ernam TYPE vbak-ernam,
              vkorg TYPE vbak-vkorg,
              vtweg TYPE vbak-vtweg,
              spart TYPE vbak-spart,
              aedat TYPE vbak-aedat,
            END OF st_vbak, 
           BEGIN OF st_final,
             vbeln TYPE vbap-vbeln,
             posnr TYPE vbap-posnr,
             matnr TYPE vbap-matnr,
             pstyv TYPE vbap-pstyv,
             kwmeng TYPE vbap-kwmeng,
             werks TYPE vbap-werks,
             erdat TYPE vbak-erdat,
             ernam TYPE vbak-ernam,
             vkorg TYPE vbak-vkorg,
             vtweg TYPE vbak-vtweg,
             spart TYPE vbak-spart,
             aedat TYPE vbak-aedat,
           END OF st_final.
    DATA:
          lt_vbap TYPE TABLE OF st_vbap,
          ls_vbap TYPE st_vbap,
          lt_vbak TYPE TABLE OF st_vbak,
          ls_vbak TYPE st_vbak,
          lt_final TYPE TABLE OF st_final,
          ls_final TYPE st_final,
          lt_fieldcat TYPE slis_t_fieldcat_alv,
          ls_fieldcat TYPE slis_fieldcat_alv,
          layout TYPE slis_layout_alv,
          lt_sort TYPE slis_t_sortinfo_alv,
          ls_sort TYPE slis_sortinfo_alv.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_vbeln FOR vbap-vbeln,
                    s_erdat FOR vbap-erdat.
    SELECTION-SCREEN END OF BLOCK b1.
    PERFORM select_data.
    PERFORM loop_final.
    PERFORM sort.
    PERFORM a USING:
          'VBELN' TEXT-002,
          'POSNR' TEXT-003,
          'MATNR' TEXT-004,
          'KWMENG' TEXT-005,
          'PSTYV' TEXT-006,
          'WERKS' TEXT-007,
          'VKORG' TEXT-008,
          'VTWEG' TEXT-009,
          'SPART' TEXT-010,
          'ERNAM' TEXT-011,
          'ERDAT' TEXT-012,
          'AEDAT' TEXT-013.
    PERFORM display.
    *&      Form  SELECT_DATA
          text
    FORM select_data.
      SELECT
       vbeln
       vkorg
       vtweg
       spart
       ernam
       erdat
       aedat
       INTO CORRESPONDING FIELDS OF TABLE lt_vbak
       FROM vbak
       WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
      IF sy-subrc = 0.
        SORT lt_vbak by vbeln.
      ENDIF.
      SELECT
       vbeln
       posnr
       matnr
       kwmeng
       pstyv
       werks
       INTO CORRESPONDING FIELDS OF TABLE lt_vbap
       FROM vbap
       FOR ALL ENTRIES IN lt_vbak
       WHERE vbeln = lt_vbak-vbeln.
      IF sy-subrc = 0.
        SORT lt_vbap by vbeln.
      ENDIF.
    ENDFORM.                    "SELECT_DATA
    *&      Form  LOOP_FINAL
          text
    FORM loop_final.
      LOOP AT lt_vbap INTO ls_vbap.
        ls_final-vbeln = ls_vbap-vbeln.
        ls_final-posnr = ls_vbap-posnr.
        ls_final-matnr = ls_vbap-matnr.
        ls_final-kwmeng = ls_vbap-kwmeng.
        ls_final-pstyv = ls_vbap-pstyv.
        ls_final-werks = ls_vbap-werks.
        READ TABLE lt_vbak INTO ls_vbak WITH KEY vbeln = ls_vbap-vbeln BINARY SEARCH.
        ls_final-vkorg = ls_vbak-vkorg.
        ls_final-vtweg = ls_vbak-vtweg.
        ls_final-spart = ls_vbak-spart.
        ls_final-ernam = ls_vbak-ernam.
        ls_final-erdat = ls_vbak-erdat.
        ls_final-aedat = ls_vbak-aedat.
        APPEND ls_final TO lt_final.
        CLEAR ls_final.
      ENDLOOP.
      ENDFORM.                    "LOOP_FINAL
    *&      Form  SORT
          text
    FORM sort.
      ls_sort-spos = '01' .
      ls_sort-fieldname = 'VBELN'.
      ls_sort-tabname = 'LT_FINAL'.
      ls_sort-up = c_x.
      ls_sort-subtot = c_x.
      APPEND ls_sort TO lt_sort .
    ENDFORM.                    "SORT
    *&      Form  A
          text
         -->FNAME      text
         -->SELTEXT    text
         -->EMPHA      text
    FORM a USING fname TYPE string seltext TYPE string.
      IF fname = 'KWMENG'.
        ls_fieldcat-do_sum =  c_x.
      ENDIF.
      ls_fieldcat-fieldname = fname.
      ls_fieldcat-seltext_m = seltext.
      APPEND ls_fieldcat TO lt_fieldcat.
      CLEAR ls_fieldcat.
    ENDFORM.                    "A
    *&      Form  ALV
          text
    FORM display.
      layout-zebra = c_x.
      layout-colwidth_optimize = c_x.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
       i_callback_program                = sy-repid
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = ' '
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
        is_layout                         = layout
        it_fieldcat                       = lt_fieldcat
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
        it_sort                           = lt_sort
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = C_X
      I_SAVE                            = ' '
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      I_HTML_HEIGHT_TOP                 = 0
      I_HTML_HEIGHT_END                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      IR_SALV_FULLSCREEN_ADAPTER        =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
        TABLES
        t_outtab                          = lt_final
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    "ALV

  • In which transaction can i find the Order acknowledgement field?

    Hi All,
    In which transaction Can i get the Order acknowledgement field ? i tried in VL10B and VL10D but i could not get it.
    And also tell me what is the field (order acknowledgement) and in which table can i find it?
    Thanks in Advance.
    Pallavi

    EKES-ERDAT
    Tcode - ME92F

  • I am ABAP consultant...in which transaction can we find Service order field

    HI...
    i am ABAP consultant...in which transaction can we find Service order field...
    plz let me know in which transaction we can c service order no: and contract no: and if possible tell me the table relations also...
    In which transaction ,can we calculate external, internal labor and material cost for a service.... i
    i have gone thru iw32, iw 33,va42,va43.
    Thanks
    Madhavi.

    Dear Madhavi,
    the service orders can be linked to the sales order in Make-To-Order (assembly) and in Repair-Order process. These processes are absolutely different from the SD point of view, but here some general points:
    The button "Service Order" can be observed in the transaction VA02 or VA03, if you go to the sales order, then mark the item and go to the schedule line screen. Under the schedule lines you can see three buttons. The first button from the right side should be "Service Order" if the service order is linked directly to the sales order.
    The interface between Sd and CS is the function module CO_61_ORDER_EDIT
    It is in the case you want to debug. 
    On the database, please check the field VBEP-AUFNR for the corresponding sales order and sales order item.
    I hope, this start info will help you a little bit further.
    Kind regards,
    Akmal Vakhidov
    Development Support SD, SAP, Walldorf/Germany

  • To find which packages the PUBLIC role has execute privileges on

    Hi Experts:
    I need to find which packages the PUBLIC role has execute privileges on, since an Audit has revealed there are "there were execute privileges on 2 packages granted to the PUBLIC role"
    How can I find these? I have queried, in different ways, dba_tab_privs and dba_sys_privs but I cant get a way to see
    execute privileges on packages / procedures.
    Thanks,
    10.2.0.4
    Linux RH 4.
    Edited by: user11981168 on 30-Apr-2010 04:12

    SELECT table_name
    FROM dba_tab_privs p
    ,dba_objects o
    WHERE p.owner=o.owner
    AND p.table_name = o.object_name
    AND p.owner = 'SYS'
    AND p.privilege = 'EXECUTE'
    AND p.grantee = 'PUBLIC'
    AND o.object_type='PROCEDURE'; --PACKAGE,FUNCTION                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to find which package is corrupted?

    Hi,
    I'm connected to the net throught a broadband connection right for the next few days and I have the following issue: I'm trying to install libreoffice, and for this, I have about 90 Mb of packages to download. Now because the connection is not too stable, and not fast at all, I had a few tries until I got all the stuff downloaded ( 1. here I mean packman downloaded for me; 2.I set aria2 as transfer command to continue the downloads ), but now pacman says that a package is corrupted and can't install.
    The problem is that pacman does not say anything about which package is corrupted, the whole output is:
    Targets (18): graphite-1:1.0.3-1 hsqldb-java-1:1.8.0.10-2 hyphen-2.8.3-1 libidl2-0.8.14-2 libreoffice-common-3.5.1-1 libreoffice-en-US-3.5.1-1 libwpd-0.9.2-2 libwps-0.2.2-2 lpsolve-5.5.2.0-2
    neon-0.29.6-4 orbit2-2.14.19-2 libreoffice-base-3.5.1-1 libreoffice-calc-3.5.1-1 libreoffice-draw-3.5.1-1 libreoffice-gnome-3.5.1-1 libreoffice-impress-3.5.1-1
    libreoffice-math-3.5.1-1 libreoffice-writer-3.5.1-1
    Total Download Size: 0.00 MiB
    Proceed with download? [Y/n]
    (18/18) checking package integrity [##########################################################################] 100%
    error: failed to commit transaction (invalid or corrupted package)
    Errors occurred, no packages were upgraded.
    Is there a way to find which package is corrupted? Because I would not start over the whole download process if it is possible, I'd like to re-download only the corrupted ones.
    I'm using pacman 4.0.2, 32bit.
    Thank you!

    Gcool wrote:pacman --debug will tell you which package it is.
    Thanks for the tip, unfortunately did not helped me, the package, which was corrupted was not listed by the debug info. I started to manually test each package I downloaded and found the bad one that way. I kind of miss the old behavior, when pacman offered you to delete and re-download a package, if it did not passed the CRC verification.
    But thanks anyway!

  • Is there a way do find out to which package a file belongs?

    If pacman tries to install a package it is normally aware of files beeing already installed and puts out an error message. Is it possible to encounter to which package a file belongs, t.m. which package did install it?

    pacman -Qo <file>
    For example,
    $ pacman -Qo /usr/bin/python
    /usr/bin/python2.5 is owned by python 2.5.1-5
    It's all in the manpage for pacman.

  • Array length field

    Any array type has a length field which is probably declared as
    final public static int length;
    I would like to see the definition of length field at the class level
    within the java source. I do not find any such definition in the javadocs generated for the class Array?

    Array instances do not extend the Array class. They are part of the JVMs built in types. Arrays are strange in this aspect because they are Object types but their class type is not defined by a class file.

  • BPC 7.5 NW -- Data Manager Export:  Fixed-Length Fields?

    Hi Experts,
    Client has a requirement that we export a batch of transaction data from BPC, which is generally no problem, but in this case they want to do it with Fixed-Length fields in the Export file.
    I've done a lot of BPC Data Manager Imports with Fixed-Length fields, and that function really works well.  But, has anyone tried to use the Export package with this option?  It doesn't seem to be working in my case yet.
    Any tips?
    Thanks so much, as always,
    Garrett
    =======================
    Update -- After going back to review documentation, it looks like the the *PAD() function is actually intended for export not really importing, which makes sense.  ...The SAP online help library says that it's meant for import, but I now believe that is a typo.
    Also, I've added the line "OUTPUTFORMAT = NORMAL" in my *OPTIONS section.  Anyone else manage to get export working on BPC 7.5 NW
    Edited by: Garrett Tedeman on Mar 3, 2011 1:37 PM

    Update -- This problem may now be resolved.
    I have been able to conduct test IMPORTs of 48,000, then 96,000 and then 1.7 million records.  All were fine.
    It turns out that that difference is that the text files were sorted by amount in the ones that failed.  They were sorted by GLAccount in column A for the ones that succeeded.
    Edit:  Yep, all files loaded normally when re-sorted by GLACCOUNT, etc. on the left-hand side.  Apparently, when you're doing a lot of records that might confuse the system or something
    Edited by: Garrett Tedeman on Nov 18, 2010 11:41 AM

  • Bank statement: problem to load variable length field

    we have many bank accounts with different banks, and we would like to use the bank reconciliation module to do bank reconciliation.
    we have problem in load the MT940 bank statement. All these banks are providing so called standard SWIFT940 format, which not able to give fixed length field.
    we have problem on line 61 which have a lot of variable length fields.
    line 61 comprise of 7 fields, which are:
    A) Value date - fixed 6 chars.
    B) Entry date - fixed 4 chars.
    C) Credit/debit - variable 1-2 chars.
    D) Fund Code - fixed 1 char
    E) Transaction amount - variable 15 chars
    F) Transaction code/type - fixed 4 chars
    G) MID, cheque#, BIS - variable 16 chars
    How can we write the SQL Loader script if there is no delimiter, and the start position of the fields are not fixed?
    we can load A and B easily, but C onwards we will have problems.
    please help.
    INTO TABLE ce_stmt_int_tmp
    WHEN rec_id_no = '61'
    TRAILING NULLCOLS
    (rec_no RECNUM,
    rec_id_no POSITION(1:2) CHAR,
    column1 POSITION(4:9) CHAR,
    column2 POSITION(10:13) CHAR,
    column3 ??
    column4 ??
    column5 ??
    column6 ??
    column7 ??
    ------

    Hi Linda,
    As said by gupta, please check, whether the bank statement has the statement 62F:
    If not, please get the statement again from bank and ensure that the end statement 62F exists in the statement..
    This will help you to overcome your problem..
    Regards,
    Praisty

  • Unable to find 0equipment field in 0pm_measurement, pls help

    Hi all,
             unable to find 0equipment field in 0pm_measurement (Measurement Results), the problem actually here is, may be i can add the field thru LO' extraction the field 0equipment to 0pm_measurement but it is not LO's extraction we can go for, its probably thru LIS or FI procedure i suppose. but if u have a different input, pls let me know. and if we have to add the field 0equipment to 0pm_measurement how should we go about. Thanks in advance.

    Hi,
    Could u tell me which procedure u have used for this as LO extraction is not possible through this & how u have added  equipment for this,as even I have the same requirement
    Thanks
    Maya

Maybe you are looking for