Unable to find 0equipment field in 0pm_measurement, pls help

Hi all,
unable to find 0equipment field in 0pm_measurement (Measurement Results), the problem actually here is, may be i can add the field thru LO' extraction the field 0equipment to 0pm_measurement but it is not LO's extraction we can go for, its probably thru LIS or FI procedure i suppose. but if u have a different input, pls let me know. and if we have to add the field 0equipment to 0pm_measurement how should we go about. Thanks in advance.

Hi,
Could u tell me which procedure u have used for this as LO extraction is not possible through this & how u have added equipment for this,as even I have the same requirement
Thanks
Maya

Similar Messages

Unable to find consolidate field in Time off Process application

Hi All,
I create an aplllication for Time off process and unable to find "consolidate" field when selecting set up block parameters .I am using portals EP 7.0 Version
Could you please help me in getting this ...
Thanks ,
Nararaju.

Hi,
we group parameters so that the output of process actions is automatically entered as input .We can consolidate parameter at Action,block adn process levels
follow the below steps
1. Select your Seq Block and click on the tab "Parameters" at the bottom pane
2. Mark all the parameter (press ctrl for multiple ) and Click on Map
3. Supply the Name and say create
at last do a SavaAll
hope this will solve ur problem
cheers
souza

I've used firefox for a month now but recently if I type on facebook the quick find search bar pops out. Even if I press Esc, when i type on facebook again the quick find bar pops out again. pls help..

I've used firefox for a month now but recently if I type on facebook the quick find search bar pops out. Even if I press Esc, when i type on facebook again the quick find bar pops out again. pls help..
even when i click the register on the top right of mozilla it wont allow me to.

I've used firefox for a month now but recently if I type on facebook the quick find search bar pops out. Even if I press Esc, when i type on facebook again the quick find bar pops out again. pls help..
even when i click the register on the top right of mozilla it wont allow me to.

How do I update my iPad 2 to iOS 5, I tried going to settings,general ,software update but I can't seem to find the software update button pls help :)

How do I update my iPad 2 to iOS 5, I tried going to settings,general ,software update but I can't seem to find the software update button pls help :)

Go to Settings > General > About and see what iOS version you are running. If it is lower than 5, you won't find the software update button. It was added when iOS 5 came out. The current iOS is 5.1.1. To update to the current OS, you'll need to connect to the computer you sync with (this is important - do not connect to a computer you do not sync with as you will lose you apps) and update the software in iTunes. Once you have updated to the 5.1.1, the software update button will be in Settings going forward. Make sure you have a lot of time. Updating from below 5 to 5 or higher is a somewhat lengthy process.
This link will provide the guidance you need:
http://www.macworld.com/article/1162925/how_to_upgrade_your_ios_device_to_ios_5. html

Try to convert doc to PDF, Unable to find "Adobe PDF resourse files, Ask help

Hi guys,
I am tryng to convert word doc file to PDF by acrobat v9.0 pro, I got the message as "Unable to find "Adobe PDF resourse files", and "Acorbat could not open 'filename' because it is either not a supported file type or because the file has been damaged ...". I did several times to run the installer to repair it, and remove and re-installed several times with different folders for the Adobe acrobat. I also did check the setting by "Preferences" under the item "Edit'. But nothing changed. I use it for generating and merging 1 or more doc files into a PDF file, so the micorsoft word which can make PDF file or use PDF printer is not useful for my object. Any ideas and helps? I really appreaciate anyone can give me help, Thanks a lot.
John

You don't need Acrobat for this at all.
If you select "Print..." there is a "PDF..." button in the lower left corner of the dialog. Click the button and select "Save as PDF..." or you can do "Open in Preview..." and save from there.
OS X has had the ability to generate PDFs since the 10.0 days. The whole graphics infrastructure is based on PDFs. You have no need whatsoever for Acrobat on the machine to do this.

I think I forgot to make a back up copy of bookmarks while using my old firefox. Recetly after formating my PC, I am unable to get my old bookmark. Pls Help

forgot to make a back up copy of bookmarks while using my old firefox. Recetly after formating my PC, I am unable to get my old bookmark. Pls Help

Sorry for your loss. I don't know how we can help you.

Hi. I don't know where my videos go on MAC. I can see all my photos in iPhoto folder, but can't see any video. Is there any other place they go or should i do smth different to find copy them separately? Pls help

hi. I don't know where my videos go on MAC. I can see all my photos in iPhoto folder, but can't see any video. Is there any other place they go or should i do smth different to find copy them separately? Pls help

Try user folder/Movies.

HT4972 I keep getting a message unable to find update server. Can someone help me. I am tryig to update my Iphone

I have been trying to update my phone for weeks. I keep getting the message "Unable to find update server. I have the latest I phone. Please help.

This is asked and answered many times every day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again.

Unable to find selection field "object type" in IP19

Hi there,
Is there any way to add the equipment "Object Type" into standard report IP19 as i couldn't find the selection field in the report.
Thanks in advance.
Regards.

Calyn Kua,
Here's a work-around:
Go to IP19 and press Multiple Selection button on the Equipment field
In the next popup select the Multiple Selection button again
Select the search-help for Equipment by equipment list
In the next selection screen enter your data including the Technical obj type data and execute the report
Select the equipment in the list as required and select the lower green tick. This should return your equipment numbers back into the IP19 equipment field
Choose the With object list checkbox if required
Execute the IP19 report
Alternatively you can copy the IP19 report and add your own customer-specific fields/logic.
PeteA

Change dataelement of EEWB field... pls help

Hi friends,
We have EEWB fields created in CRMD_ORDER tcode, with Customer data tab.
I have one field with length 40 char.
Now I have to change this field's length from 40 to 60. Can i change it ?
Basically I can see dataelement ZEEW_DATAELEMENT0701, created for this field. Can i directly go and change the dataelement length from 40 to 60?
How feasible is it to change? this field is also been used in PCUI and ICWeb screens...
Kindly pls can u give me ur advice..
thanks in well and advance,
Niraja

Shiva,
thanks,
But
for point 1, i checked where used list. it gave some 100 results, and most of them are standard structures.... and couple of z structures, with z developments.
Now can i change the dataelemt now?
point 2. im not able to see any projects right now in dev server in tcode EEWB.. hwo come?
can u pls reply back.
Niraja

Unable to Intialize HDV deck - can anyone pls help me with this FCE Issue?

I have recently moved from a MacBook Pro (circa 2 yrs old) to a new MacBook Pro with the NEW firewire 800 port. I have bought a new firewire cable and my camera does not want to be capture from my Sony A1E.
I have a MacBook Pro 2.8ghz running on OS X 10.6.2 and have all the updates installed for FCE.
Every time i try to capture the message comes up "Unable to Intialize HDV deck. Please make sure a deck is connected and try again".
The System is set up to receive the correct frame rate footage and type of footage (which is: HDV-Apple Intermediate Codec 1080i50. Formats: All formats). I am running on PAL, so 25fps.
Is there any advice / direction that you could give me at all as I am struggling!
Any help support would be appreciated!
Thanks, Martin

Hi,
Would you confirm that you are using a 9-pin to 4-pin FW cable to connect to your camcorder and that your camcorder is the only FW device connected to your Mac.
When you start up FCE with the camera connected to your Mac and already powered on in VTR mode, does FCE 'see' the camera, or do you get a warning message that FCE is "Unable to locate the following external devices ..." ?

I Can't Find The Problem!! pls help (ONLY IF U HAVE SOME FREE TIME)

I'd like to post some code because I cant see the problem, maybe somebody else will see it. Just take a little look if u see some detail let me know pls.
I have a class word, wich is actualy a representation of a word in some text
public class Word {
int timesInText; //how many times this word is in the text
//A vector with the lines were the word appears
public Vector<Integer> lines = new Vector<Integer>();
public String word; //The word we are representing... Very creative Isn't it?
//The lines were the word appear in a string in this format : , line, line, line...
StringBuffer Stringlines = new StringBuffer(":");
public Palabra(String word) {
this.word = word;
timesInText=1;
public void wordFinded(int linea) {
lines.add(linea);
Stringlines.append(", " + linea);
timesInText++;
public String toString() {
String var = word + ": " + Stringlines.toString();
return var;
}//End of the word class
I have a class main, wich is a window with the logic of the program, notice that
I'll provide only the necesary thing to understand my problem in order to make
my post shorter. The words I read can't have duplicates but I must say in wich
lines the duplicates are.
public class main{
Vector<Word> words = new Vector<Word>(); //A vector for all the words in text
JText area = new JTextArea(); //The JTextArea of my window
public void getWords(){
JFrame wordsInText = new JFrame("Word Search:");
JTextArea wordsArea = new JTextArea("\tResult :");
wordsInText.getContentPane().add(new JScrollPane(wordsArea));
boolean alreadySeen;
String text = area.getText();
String line;
String word;
Word wordBeingRead;
int lines = 0;
BufferedReader br = new BufferedReader(new StringReader(text)); //To read complete text
while ((line = br.readLine()) != null)
     lines += 1;
StringTokenizer st = new StringTokenizer(line, " "); //But line by line
while (st.hasMoreTokens())
alreadySeen = false;
word = st.nextToken();
wordBeingRead = new Word(word);
Iterator iter = words.iterator();
if(!iter.hasNext()) //The first word! save it
words.add(wordBeingRead);
else //Yeah... not the first word... Check it...
Iterator iterAux = palabras.iterator();
while(iterAux.hasNext()) //Check if it's already defined
Word p = (Word) iterAux.next();
if(wordBeingRead.word.equals(p.word)) //It is already defined...
wordBeingRead.wordFinded(lines); //I got one on line (lines)
alreadySeen=true; //Yes! It's already seen
if(alreadySeen==false) //If it's already seen wont get in here
words.add(wordBeingRead); //A new word! Let's save it
Iterator iter = palabras.iterator(); //Ok I saved all the words, time to print them
while(iter.hasNext())
     wordBeingRead = (Word)iter.next();
     wordsArea.append("\n" + WordBeingRead.toString()); //Put them over here
     wordsInText.setSize(400, 400);
wordsInText.setLocation(100, 75);
wordsInText.setVisible(true); //Yes! show them
}catch(Exception e){
label.setText(e.getMessage()); //If anything goes wrong
}//End of the class main

Ok, sorry about that.
Post your code between code tags (use the code button when you post a reply).I'm new in the forum and the tags doesnt seem to work with netscape, will use IE next time.
you should not have a main class. You should have a main method inside a class eg:The original name of the class is Ventana, but you can actually name a class main.
Also, your constructor should have the same name as your class eg:The constructor in the word class it's written like that because I translated the code to english so that it could be more simply to understand.
4. If you don't get errors tell us what you expect your code to do and what it IS actually doing.Ok I'll give you a sample input and output:
INPUT:
"I am sorry for not posting correctly
I will make sure this wont happen again
I will be a good user"
OUTPUT I'm getting:
I: :
am: :
sorry: :
for: :
not: :
posting: :
correctly: :
will: :
make: :
sure: :
this: :
wont: :
happen: :
again: :
be: :
a: :
good: :
user: :
OUTPUT I would love to have:
I: 1, 2, 3
am: 1
sorry: 1
for: 1
not: 1
posting: 1
correctly: 1
will: 2, 3
make: 2
sure: 2
this: 2
wont: 2
happen: 2
again: 2
be: 3
a: 3
good: 3
user: 3
I just noticed that I get the double : : Because I do it twice... ^^
Thanks for the recomendations, and I'm sorry, totally my fault, I mean it.

I seem to be unable to find the list of keyword tags - HELP!

I have been using keyword tags for years in previous versions of Photoshop Elements. In version 12 at first I noticed that they were harder to apply. But now, something has happened that has removed the list of tags. How do I get them back??? (and where do I find out how to use them easily)?

Hi,
If you don't want to use the map functions then probably the best thing is to use keyword tags.
Switch to Media view click on the + next to Keywords and select New Category. Give it a name like My Places.
If you want to create a hierarchy of say continents, Click on the + again and select New Sub-Category. Give it a name of a continent and make sure that the parent is set to My Places.
You can create the tree structure as you want.
Finally, click on the + and select New Keyword Tag. Give it the name of the place that you want and check that the category is set to its parent in the chain.
You could end up with this type of thing
My Places
     Sub Cat 1
          Place 1
     Sub Cat 2
          sub Cat 2-1
              Place 2
          sub Cat 2-2
               Place 3
I hope that makes sense - good luck
Brian

After successfully an ebook from my local library I was unable to. find it on my tablet. please help

After successfully downloading an ebook froom my local library I was unable to locate it on my tablet.

I will keep it simple: Sorry, but it's gone. You didn't back it up and you deleted it.

Cannot find the servlet--can anyone pls help

Hi,
I am trying to run an example servlet the code is as follows:
Example.html
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD>
<Title>Example</Title>
</HEAD>
<BODY>
<form action="\example\classes.ShowParameters" method="post">
Name: <input type="textbox" size="10">
Number:<input type="textbox" size="10">
<input type="submit" value="submit">
</form>
</BODY>
</HTML>
ShowParameters.java
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
public class ShowParameters extends HttpServlet {
public void doGet(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println( "<BODY BGCOLOR=\"#FDF5E6\">\n" +
"<H1 ALIGN=CENTER>" + "</H1>\n" +
"<TABLE BORDER=1 ALIGN=CENTER>\n" +
"<TR BGCOLOR=\"#FFAD00\">\n" +
"<TH>Parameter Name<TH>Parameter Value(s)");
Enumeration paramNames = request.getParameterNames();
while(paramNames.hasMoreElements()) {
String paramName = (String)paramNames.nextElement();
out.println("<TR><TD>" + paramName + "\n<TD>");
String[] paramValues = request.getParameterValues(paramName);
if (paramValues.length == 1) {
String paramValue = paramValues[0];
if (paramValue.length() == 0)
out.print("<I>No Value</I>");
else
out.print(paramValue);
} else {
out.println("<UL>");
for(int i=0; i<paramValues.length; i++) {
out.println("><LI>" + paramValues);
out.println("</UL>");
out.println("</TABLE>\n</BODY></HTML>");
public void doPost(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
doGet(request, response);
example.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Welcome </display-name>
<description>
Welcome to Pc Tune Up
</description>
<servlet>
<servlet-name>example.ShowParameters</servlet-name>
<servlet-class>example.ShowParameters</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>example.ShowParameters</servlet-name>
<url-pattern>/Example.html</url-pattern>
</servlet-mapping>
</web-app>
and the servlet is sucessfully compiled..
and i put the classes in the ROOT directory..
The structure is as follows:
C:\Program Files\Apache Software Foundation\Tomcat 5.0\webapps\ROOT\WEB-INF\classes\example\ShowParameters.class
and also the java files in the same folder
and i created the jar file and placed it in the lib folder of ROOT.
but when i am trying to run the html file and submit the form it says HTTP:404 FILE NOT FOUND ERROR..
Can anyone please help me where i am going wrong....
Thanks & Regards
Lavanya

[<form action="\example\classes.ShowParameters" method="post">[
this is wrong
change it to
<form action="/Example.html" method="post">
beacause you have specified
<url-pattern>/Example.html</url-pattern>
this is how you map a request to a servlet
its better if you chage it like this
<form action="/Example." method="post">
In web.xml
<url-pattern>/Example</url-pattern>

Unable to find 0equipment field in 0pm_measurement, pls help

Similar Messages

Maybe you are looking for