In which table is the Live cache data stored?

Hi experts,
I am new APO .Can anyone let me know in which database table will the Live cache data be stored?
Thanks in advance
regards
Ashwin.

Hello Ashwin,
the idea of the liveCache is to haev data permanently and quickly available without having to read/write from/to database. Therefore, the liveCache is <b>NOT</b> a physical database, it is a program in C++ that <i>simulates</i> a database and holds the data in the memory.
However, it does need so called liveCache-anchors which are saved on the database, and which are similar to pointers.
However, you can extract data from liveCache using BADIs or by creating a datasource on a planning area (for DP and SNP), manipulation can also be done only by BADIs or sophisticated programming (which basically uses RFCs).
I hope this answers your question.
Regards,
Klaus

Similar Messages

Which tables store the domains and data types?

Hi.
From what I know, DD01L stores all the domains (both SAP and user-created) in the system. Is this understanding correct?
As for data types, which table stores them?
Thanks.

Hi,
All abap program stored in the TADIR table and TRDIR
Z_reports are stored in the table REPOSRC
TVDIR is the system table(view) maintained by sap.
in this all Tables are stored.
TVDIR is a repository of VIEWS.
The domains are stored in DD01L
The tables that are created are stored in DD02L
Fields are stored in DD03L.
Data Elements are stored in DD04L
DD06L                          Pool/cluster structures
DD07L                          R/3 DD: values for the domains
DD08L                          R/3 DD: relationship definitions
DD09L                          DD: Technical settings of tables

In which table does the Manage Rejection data is stored

Hi All,
I need some information regarding Manage Rejection.
In which table is Rejected users data is stored. Actually what I am looking for is to look at the comments of all the rejected users by the reviewers.
Currently I need to go into each and every request for the comments of reviewers.
I searched for any specific table on the net but was able to find any.
Please any help in this regard is appreciated.
Regards,
Nisha

Dear Nisha,
you can use table GRACREVREJUSER with the correpsonding reasons from table GRACREJREASON and GRACREJREASONT.
Regards,
Alessandro

Accessing the planning cache data (In IP)

Hello...
I need a help in retreiving the live cache data.
while we are using the transactional cube everytime we need to switch into planning mode and while loading we need to switch to load mode.
Is there any other way to access the IP cache data.
Appreciate any suggestions....
Regards,
Pari.

Hi Parimala,
Custom Planning Functions can be created using the transaction RSPLF1. Give a technical name and click on create button. It will ask for a class name to be attached with the function type. The class should be created in SE24 transaction. The implementation of the class will be in object oriented ABAP, where you will write the implementation logic in class methods.
The custom planning function so created is available for usage when you create a planning function attached with an aggregation level. You can see it in the drop-down list of all the function types.
You can refer to the standard function type for delete (0RSPL_DELETE) which will give you an idea on how a the class is implemented.
The link provided by Marc above is helpful :
http://help.sap.com/saphelp_nw70/helpdata/en/43/332530c1b64866e10000000a1553f6/frameset.htm
Also, go through this how to guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0ac03a4-e46e-2910-f69d-ec5fbb050cbf
Hope this helps you.
Regards,
Srinivas Kamireddy.

Which table stores the data of transaction FBL1N...?

Hi,
Please help me find out which table stores the data ,generated from transaction FBL1N..Actually i need to find out the g/l account against the vendor account that is being displayed in FBL3N's document overview.

Hi,
Data will be retrieved from following table :
tables: lfa1, lfb1, bsik, bsid, kna1, t001,t005, SKAT, SKB1.
In BSIK you have both LIFNR and HKONT. You will get the data based on the LIFNR and HKONT. LIFNR is Vendor and HKONT is GL assigned to the vendor.
Thanks,
Sriram Ponna.
Message was edited by:
Sriram Ponna

When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI

When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI( I am not getting any error message in E$_TARGET_ANI_TEST).
When i am running the interface i am getting the below error against the errored step
"ORA-01045: user ABC lacks CREATE SESSION privilege; logon denied."
Only E$_TARGET_ANI_TEST is created with no data. No such tables like C$_0TARGET_ANI_TEST, I$_TARGET_ANI_TEST are created and also data is not inserted in the target table TARGET_ANI_TEST.

Hi,
I have checked that only E$ table is created. C$ and I$ table are not created ( I have selected my target schema as the part for the staging table).
All the parameters for dropping the tables are selected as "<default>:false".
I am importing the following KMs with the following parameters:
1) CKM Oracle
DROP_ERROR_TABLE
:false
DROP_CHECK_TABLE
:false
CREATE_ERROR_INDEX
:true
COMPATIBLE
:9
VALIDATE
:false
ENABLE_EDITION_SUPPORT
:false
UPGRADE_ERROR_TABLE
:false
2) LKM SQL to SQL
DELETE_TEMPORARY_OBJECTS
:true
3) IKM SQL Incremental Update
INSERT
:true
UPDATE
:true
COMMIT
:true
SYNC_JRN_DELETE
:true
FLOW_CONTROL
:true
RECYCLE_ERRORS
:false
STATIC_CONTROL
:false
TRUNCATE
:false
DELETE_ALL
:false
CREATE_TARG_TABLE
:false
DELETE_TEMPORARY_OBJECTS
:true

In which tables are the data for the aplication KSB1?

I'm getting data from Qlik View with a BI tool called Qlik View.
I need help to find in which tables are the data for KSB1 aplication.
I've found something in COBK and COEP but there's more table involved since I didn't find all data.
Somente can help me please?
Regards.
Robson

I ran a trace and found some tables that may help you.
COVP(View)
CSKT
CSLT
CSKS
CSKU
AUFK
Thanks
Rathish

Approach when the used Live cache data area crosses the threshold

Hi,
Could any of you please let me know the detailed approach when the used Live cache data area crosses the threshold in APO system?
The approach I have as of now is :
1) When it is identified that data cache usage is nearly 100%, check for hit rate for OMS data in data cache in LC10 .Because generally hit rate for OMS data in data cache should be atleaset 99.8% and Data Cache usage should be well below 100%.
2) To monitor unsuccessful accesses to data cache choose refresh and compare value now and before unsuccessful accesses result in physical disk I/O and should generally be avoided.
3) The number of OMS data pages (OMS Data) should be much higher than the number of OMS history pages (History/Undo).A ratio of 4:1 is desirable. If OMS history has nearly the same size as OMS data, use Problem AnalysisPerformanceOMS versions to find out if named consistent views (Versions) are open for a long time. Maximum age should be 8hrs.
4)If consumption of OMS heap and data cache is large, one reason may be a long running transaction simulation that accumulates heap memory and prevents the garbage collector from releasing old object images.
5) To display existing transactional simulations in LC10,use Problem AnalysisPerformanceOMS versions and SM04 to find out user of corresponding transaction and may be required to cancel the session after contacting user if the version open for long time..
Please help me by providing additional information on the issue.
Thanks,
Varada Reddy.

Hi Mayank, sorry, one basic question - are you using some selection criteria during extraction? If yes, then try extraction without the selection criteria.
If you maintain selection based on, let's say, material, you need to use the right number of zeros as prefix (based on how you have defined the characteristic for material) otherwise no records would be selected.
Is this relevant in your case?
One more option is to try to repair teh datasource. In the planning area, go to extraction tools, select the datasource, and then choose the option of repair datasource.
If you need more info, pls let me know.
- Pawan

Detailed approach when the used Live cache data area crosses the threshold

Hi,
Could any of you please let me know the detailed approach when the used Live cache data area crosses the threshold in APO system?
The approach I have as of now is :
1) When it is identified that data cache usage is nearly 100%, check for hit rate for OMS data in data cache in LC10 .Because generally hit rate for OMS data in data cache should be atleaset 99.8% and Data Cache usage should be well below 100%.
2) To monitor unsuccessful accesses to data cache choose refresh and compare value now and before unsuccessful accesses result in physical disk I/O and should generally be avoided.
3) The number of OMS data pages (OMS Data) should be much higher than the number of OMS history pages (History/Undo).A ratio of 4:1 is desirable. If OMS history has nearly the same size as OMS data, use Problem AnalysisPerformanceOMS versions to find out if named consistent views (Versions) are open for a long time. Maximum age should be 8hrs.
4)If consumption of OMS heap and data cache is large, one reason may be a long running transaction simulation that accumulates heap memory and prevents the garbage collector from releasing old object images.
5) To display existing transactional simulations in LC10,use Problem AnalysisPerformanceOMS versions and SM04 to find out user of corresponding transaction and may be required to cancel the session after contacting user if the version open for long time..
Please help me by providing additional information on the issue.
Thanks,
Varada Reddy.

Hi Mayank, sorry, one basic question - are you using some selection criteria during extraction? If yes, then try extraction without the selection criteria.
If you maintain selection based on, let's say, material, you need to use the right number of zeros as prefix (based on how you have defined the characteristic for material) otherwise no records would be selected.
Is this relevant in your case?
One more option is to try to repair teh datasource. In the planning area, go to extraction tools, select the datasource, and then choose the option of repair datasource.
If you need more info, pls let me know.
- Pawan

Which table stores the value of status column in leave request.

Which table stores the value of status column in leave request.If i give pernr ,absence type and date how would i get the status
Thanks
Bala Duvvuri

Hi,
PTREQ_ACTOR      -              Request Participant
PTREQ_ATTABSDATA    -           Request Data for Attendances/Absences
PTREQ_BATCH              -      Time Stamp for Run of Background Jobs
PTREQ_CKEY_MAPP      -        Cache Assignment Table
PTREQ_HEADER             -      Request Header
PTREQ_ITEM_TYPES       -        Request Item Types
PTREQ_ITEMS                  - Request Items
PTREQ_NOTICE                -   Note for Request
PTREQ_STATUS_CHK      -         Check Methods for Status Transitions
PTREQ_STATUS_TRA      -         Status Transfers
PTREQ_TYPE                    - Request Types
PTREQ_XFEREVENTS       -        Permitted Status Transitions
PTREQ_XFEREVNT_T        -       Texts for Status Transitions
Value of staus column you can check it PTREQ_STATUS_CHK

Unused tables in the buffer cache

I have a program that queries the V$BH view every hour and stores the name of every table in the buffer cache. There is a set of tables that are never used which are appearing in the buffer cache every hour. I did a case insensitive search of the V$SQL and V$SQLTEXT views for these table names, but found nothing. How can tables be put in the buffer cache if there is no SQL statement refering to them? I'd like to find the session and program which is using these tables that no one is supposed to be using.
Kevin Tyson

This can be due to recursive SQL. Means the SQL not fired directly by the app but fired by oracle to satistfy some requirment. It can be related to some system tables or other users tables.
Example of system tables:
Oracle use system tables to reflect the current state of the database like when you insert records it update the extent information and when you create the object it update the data dictionary so that object reflect in that etc etc etc
Example of users tables:
you fired an insert statement to insert one record in table emp but to insert that record oracle has to check the state of foreign key data by querying dept and other tables so enev if you didn't specify dept table oracle use it internally to check the integrity constraint.
Daljit Singh

How can I know in which Tables are the fields stored

Hi,
In transaction FSE3 Display Financial Version
Statement Version, if I drilldown in details, I can
see Item No, Chart of Acc, From Accountm To Account D,
C.
when I do a F1 on the fields, I can see that it is a
structure. How can I know in which Tables are the
fields store?

Hi Ankit,
There are no rules or guidelines for finding the table but i will share some of the tips used generally.........but i am not sure if we can do it for a tree structure..but try anyways....
Double click on the structure name seen on the F1 pop up window...
in the structure screen, try to analyse the field which is very important something like a key in that set of fields or do the same for the fields which we feel are more important,then click on the domain for that field....once in the domain..click on the "where used list for the domain" on the top...
it will display a pop up -> select only "table" and then press "Tick/OK"..A list will be displayed with the data element and table name ..from this we need to find out the right one we need either by going for text of the table or going through each and every one
It takes time but does the job.....
Regards
Byju

Which table contains the text

hi all,
im working on a smartform where i need to display data of trx VA01.After the initial screen of va01 in the Sales Tab when i double click the line item (Material field), it goes to a third screen where in Additional Data A tab , Material Groups are defined from 1 to 5.
I need to display the data entered in material group. In table VBAP the value for the material groups from 1 to 5 is in the form of 01,02,03 etc. whereas when the user selects value of these they appear in a drop down list in the form of text.
e.g:
Material group 1 : uk , germany,india.(these are the options in drop down list on screen).
vbap contains mvgr1 as 01, 02,06.
I need to know which table contains the text uk,germany,india.
thnxs .
Points will be rewarded!

Hi,
Check the tables..
For MVGR1 - TVM1T
For MVGR2 - TVM2T
For MVGR3 - TVM3T
For MVGR4 - TVM4T
For MVGR5 - TVM5T
Thanks,
Naren

How to make sure the Live cache information is getting reflect in the bex?

Hi All,
When the user enters some data in the planning book as soon as he saves it. It should be getting reflected in the cube isnt it? when i run the query it doesnt get reflected?
What is the technical settings should i do ? to reflected those changes in apo 3.5 verison.?
Thanks
Pooja

Hi Pooja, Rafael,
You can actually have a bex report with life data.
For that you need to use a remote cube, and not a basic one.
On comment though: you access only the information stored in the live cache, so for example you will not get the projected stock easily.
By default the projected stock is not stored; but even if you sotre it in a time series key figure, you still need to run the calculation... so any changes in order will not be reflected untill the next sotck calculation...
So to get the projected stock real time is more complex and required some abap coding... to get the the order real time is quite easy to do with remote cube
Good luck
Julien

Datasource which could extract the PO history data

Hi all,
Is there a BCT datasource which could extract the PO history data i.e from EKBE table ?
Thanks in advanced.
SAM

Depending on which infi you need, there are 3 datasource:
Header - 2LIS_02_HDR
Item - 2LIS_02_ITM
and
Scheduling - 2LIS_02_SCL
The info about the history (good receipt and invoice related) are on the scheduling, but to define correctly the PO in your query you should need also the others two datasource.
You'll find more info at
http://help.sap.com/saphelp_nw04/helpdata/en/e9/62073c44564d59e10000000a114084/frameset.htm
under Datasource.
regards,
Sergio

In which table is the Live cache data stored?

Similar Messages

Maybe you are looking for