Inbound Email for Upload attachment

HI Guys,
What is the procedure to Upload CSV File attachment by inbound email in SNC via File Transfer Functionality.
-$andeep

Hi Nikkil
We are facing the same issue on upload File Transfer through Inbound Email functionality
It Would be great if you throw some light on this issue
We are processing ASN through an Email for Due List of purchasing Documents
When we send a E-mail with CSV file as an attachment to the defined Reciepent Mail addresss
It reaches SNC and also visible in SOIN TA, but there is no further update on this transaction, ASN is not getting posted for this attachment
We had made the following Setting for Inbound Email for File Upload
Make Settings for Global Constants- qRFC destination, Sender e-mail
Number Ranges for File Transfer-Define Number Ranges for Upload Profile Number
Determine Accepted E-Mail Addresses for File Upload- we had mapped the Interace(ASNDLPD) to Email Pattern
Determine Error Control of the File Upload - for Interface (ASNDLPD)
And we are also maintanied the exit rules for Inbound processing In SO50 - we had entry for /SCA/CL_FTR_MAIL_INBOUND for Internet Mail(Communication Type)
Is there any other setting that we missed out?
Regards
Satish

Similar Messages

Insert inbound email as an attachment in a new email

Sorry experts. I think this question is more apropriate in the ABAP forum, but since I'm doing this from a BSP application, and there are no answers from there I'll check with the experts here.
I need to send in a reply of an email, the source email as an attachment (even if it have attachments included).
At outlook, we can save an email as a .msg file to the hard disk, and the attach it in a new email.
In a bsp application (such as IC Webclient), do you think it is possible to do this automatically?
I can get all the information relative to an inbound email (by knowing it's SOODK id), by doing the following line codes.
DATA: LV_MAIL_DATA TYPE REF TO CL_CRM_EMAIL_DATA.
DATA: SOME_SOODK TYPE SOODK.
SOME_SOODK = 'RAW30000000006996'.
LV_MAIL_DATA = CL_CRM_EMAIL_UTILITY=>GET_MAIL_DATA_FROM_SO( IV_OBJECT_ID = SOME_SOODK ).
In lv_mail_data, I can see the headers, the TO and FROM email adresses, the body of the email, and it's attachments.
What I don't know how to do, is to take this email as a whole object, and insert it as an attachment in a new email to be sented.
Anyone can give a clue?
Thanks!
Regards

Not needed anymore.

Server Alerts reports "Virus Detected in inbound email" for spam

I receive hundreds of email every day that a Virus was detected in inbound email. When checking the contents of /Library/Server/Mail/Data/scanner/quarantine these messages are only spam message, not viruses. Virus infected messages seem to get placed in /Library/Server/Mail/Data/scanner/virusmails
I am running on Mavericks Server 3.1.2 (1354517)
serveradmin -v = Version 10.8 ($revision: 1.13 $ -- May 13 2014)
Does anyone know how to tune the Server Alerting to properly handle the files in /Library/Server/Mail/Data/scanner so that virusmails are reported as virus's but quarantine is not reported?
I have searched high and low, and cannot find where this is controlled. With Mavericks, I no longer see Virus Alerts under the alerts management menu of Server.app
I checked amavisd configs, as well as many other files under /Library/Server for any references to "quarantine" text, to no avail.
I dumped all of serveradmin settings, and do not see anything that references quarantine except for the quarantine recipient addresses for spam and viruses.
Is anyone else experiencing this, or does anyone know how to solve this?
Thanks in advance.

I received over 200 spam messages yesterday that got reported as viruses to me, and out of frustration, I discovered a work around. I don't know if this is the result of a past update, or the steps I used trying to reset the server, but I performed the following and was able to suppress the email alerts. At the time of my original posting, the Alerts section of the Server.app did not offer any option for disabling the alerts for virus..
1) Launch Server.app
2) Select Mail in left pane
3) Turn off Virus filtering
4) stop/start Mail server
5) Turn on Virus filtering
6) stop/start Mail server
7) Turn off Spam filtering
8) stop/start Mail server
9) Turn on Spam filtering
10) stop/start Mail server
11) Select Alerts in left pane
12) clear all active alert
13) Under notifications tab, I now saw "Mail" as an option
13.1) Turn off the alerts for Mail
Now I don't get spammed with Virus alerts for spam messages. This is not a fix for the configuration error in the alerting service, but it does stop the admin mailboxes from being flooded with virus alerts for all spam messages. I cannot confirm if it was the enable/disable of the filtering that added the Mail entry under alert notifications or if it was an update, as I did not check the alerts notifications at the time. I was frustrated, and desperate for a fix, so I did the first thing that came to mind. But now my Mail system alerts can be enabled/disabled through server.app so I am happy. Lets just hope for a classification fix in the Yosemite update coming this fall.

SOAP Request for uploading attachment through Web Services

Hi,
Can someone help me in understanding how to form a SOAP request (Web Service) for uploading an attachment into OD?
The Web service PDF mentions about the getting attachment from OD (SOAP) but not uploading.
Please suggest.
Regards,
Sumeet K.

The return message being in HTML escaped form is expected, however the truncated response is not.
Please contact support via support.oracle.com, and they will be able to advise appropriately.

Accepting inbound emails for other Organization

Hi There,
We have an Organization (it is a ODC) which wants to route their emails through our gateway servers. Mailboxes will be hosted on their servers. We don't have any contacts for their organization users'. How can we route their outbound and inbound through
our systems??
Can we create a send connector and route their email smart host? Please provide few steps. Thank you!

Hi There,
We have an Organization (it is a ODC) which wants to route their emails through our gateway servers. Mailboxes will be hosted on their servers. We don't have any contacts for their organization users'. How can we route their outbound and inbound through
our systems??
Can we create a send connector and route their email smart host? Please provide few steps. Thank you!
What are you using for gateway servers?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

FM, for uploading attachment in DMS and getting the LOgical & physical ID

Hi everybody,
I'm creating contract via FM, now I'd like to add attachments, I have been doing test and is working with attachments already created in the system. (This is in a SRM systems, but my question is about a FM in the BASIS part)
I am filling out the parameter E_ATTACH with structure type BBPT_PDS_ATT_T. Basically I'm including the link between the attachment and the contract, but I should upload first the attachment to the DMS and then make the link.
The question is. Does anybody know a function module that allow me previously insert my attachment. In that way I suppose I will know de LOIO_OBJID and PHIO_OBJID. (I am using LOIO_CLASS = BBP_L_DOC and PHIO_CLASS= BBP_P_CLASS)
I have tested with SDOK_WS_UPLOAD, but I don't get any OBJID
thanks
Best Regards

Hi,
Thanks but in my system this FM doesn't exist.
This is my components stack.
SAP_ABA     700     0015     SAPKA70015
SAP_BASIS     700     0015     SAPKB70015
PI_BASIS     2005_1_700     0015     SAPKIPYJ7F
ST-PI     2005_1_700     0005     SAPKITLQI5
SAP_BW     700     0017     SAPKW70017
SAP_AP     700     0013     SAPKNA7013
SRM_PLUS     550     0012     SAPKIBK012
SRM_SERVER     550     0012     SAPKIBKT12
I suppose the FM you indicated is in other component.
Any other idea about this.

Inbound emails stripped of .FAX attachments

G'day all,
I'm on a 620 system up to basis patch 60.
When an inbound email contains an attachment with extension .FAX the attachment disappears!!
Any other extensions are fine. The .FAX files in my case are actually .TIF files but the software creates them with .FAX extension.
If I rename the file to have a .FOX extension for example, the attachment makes it into SAP just fine, as does any other extensions I've tried (.TXT, .DOC, .ZIP, .PDF, .XLS etc)
This happens whether I send to a normal SAP users inbox or whether I handle the inbound request using my own SO50 configured class.
We've turned on the Inbound and General trace in SCOT and there is nothing too exciting. The log does show there is a .FAX attachment present (so it's not stripped by the external mail system) but it doesn't indicate that it's been removed.
Please note!! This is NOT inbound Fax handling. It's just a mail that happens to have an attachment which ends with the extension .FAX.
Any ideas??
Thanks,
Mark

Hello,
Can you please check SAP note:
813619
make sure the customizing of the type .FAX is correct.
Best regards,
Dezso

Applescript: email multliple file attachements

Hello, I setting up a rule using action script in conjunction with Hazel, but im having some problems on the action scropt end. Seems everything works fine except it wants to send a separate email for each attachment, instead of placing them all to one email Can anyone help me with this, this is the code im using:
set mailAttach to (POSIX path of theFile)
set subject_ to "images update!"
set the_content to "Attention, New files have been added"
tell application "Mail"
          set newMessage to make new outgoing message with properties {subject:subject_, content:the_content & return & return}
          tell newMessage
                    set visible to false
                    set sender to "[email protected]"
make new to recipient at end of to recipients with properties {[email protected]@mac.com"}
make new attachment with properties {file name:mailAttach} at after the last paragraph
(* change save to send to send*)
send --<<<<---------------- change save to send to send or send to save to save to drafts
(* change save to send to send*)
          end tell
end tell

At this time playing WAV files from attachments is not possible. You may want to Submit feedback on this and put in a request for it to be a added feature.
http://www.apple.com/feedback/iphone.html
Customers feedback influences changes the most.

Cannot configure email for an Office365 Sharepoint list

Hi,
We are using an Office365 deployment of Project Online and SharePoint sites. There is a lot of information available on how to configure SharePoint lists to receive emails however the only option I have under List Settings | Communications is for RSS Feeds.
Can anyone tell me if this feature available in Office365 SharePoint?
Regards,
Conrad

Hi Conrad,
Please refer to the threads below for the email settings in Office 365 SharePoint sites:
http://community.office365.com/en-us/f/154/t/809.aspx
QUOTE:
Email alerts and workflow notifications can be sent to SharePoint users when documents or other items have been changed or added to a site. SharePoint Online does not at this time support to inbound email for document libraries, discussion boards, calendars,
and lists.
If you would like to make SharePoint sites to receive emails, I'd suggest you conside sitemailbox in SharePoint site:
http://office.microsoft.com/en-in/office365-suite-help/prepare-for-using-site-mailboxes-in-office-365-HA103834109.aspx
Regards,
Rebecca Tu
TechNet Community Support

I've already changed email for my apple id more than 6 months. But 2-3 months ago until now I've recieved and email to ask apple id confirmation from me. I never confirm anything because I don't know,the link's attached, it's legal or illegal.

Dear Apple support team,
I've already changed email for my apple id more than 6 months. But 2-3 months ago until now I've recieved and email to ask my apple id confirmation from me about 6-8 emails. I never confirm anything because I don't know,the link's attached, it's legal or illegal.
The latest link (just be sent to my email 1 hr. ago) : http://www.smartpixeladv.com/proma/Login/index.html
Text is:
Dear Customer,
We recently noticed an unusual activity in your iTunes account. Please complete the process to confirm your
informations.
Confirm Now>
This link will expire three days after this email was sent.
If you don’t make this request, your account will be blocked for security reasons.
Apple Support
In my opinion, i think "http://" should be "https://" right? Or Apple should show the link on your website that we can find, re- check and click by ourselve. Or Apple should do "How to confirm apple id" on your main page. ( in fact i'm not sure you already done "How to" on your website yes or not, because I cannot find it)
The apple id is sensitive security, it's concerned personal security and any credit card payment so please understand me that's why i must to interrupt your team to help me to solve this problem. I'm scared my account will be blocked. Please advice me.
Wassa. (BKK)

It is a phishing attempt to get your Apple ID and Password.
You should forward it to Apple : [email protected]

How to Change Outlook Default Folder for Insert-Attachment and Save Email/Attachemnt while Outlook is open (VBA)

Hello,
Office 2010 32bit, VBA
Is it possible to programmatically do the above while Outlook is running? If so, I'm hoping to make that change from a Word macro.
I tried tinkering with the reg key and that doesn't work because it appears Outlook only respects it at startup time. Similary changing Word File-options-location of documents is respected only when Outlook starts.
I'm looking to seamlessly keep Outlook's default folder in sync with Word's default folder as the users change working folders in Word, which they do many times per day (and they chose the folder among a couple of thousand possibilities).
I'm hoping there is a difficult-to-find Outlook object I can manipuate to get to the end result. IF there is such an Object I have been unable to find it.
Many thanks!
Julie

Hi Julie,
Based on my research, I think outlook object model doesn’t provide the way to change the default folder for insert attachment and save email/attachment.
The way to change it is that we need to modify the registry setting and the outlook app should be restart.
# How to set the default attachment folder in Outlook
https://support.microsoft.com/kb/252732?wa=wsignin1.0
You may create the add-in to custom these actions (e.g. attach attachment, save email)
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Sending an Email with an attachment for all the Customers

Hi friends,
How can i send an email with an attachment to the customers email address.
the attachment will be in doc format.
the data which i am sending must be in a TABLE format
withe 5 columns.
Having an Header
and each column with a column heading
Please guide me.
Thanks in Advance,
Ganesh.

http://www.sap-img.com/abap/sending-email-with-attachment.htm
Sending mail to an external maild with PDF attachment.
Creating a PDF attachment and send it via Email
Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface
How to send a ttachment with email.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/abap-Sendthespooldatatoanemail+address.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/convertSpoolrequesttoPDFandsendase-mail
Friend just have a look in the forum itself, there are many posts for ur query, you definetly get exact solution no need to wait for answers/solutions.
All the best

Monitoring for Inbound Emails

Hi There!
I have been asked by a client who recently had an outage of inbound emails
due to corrupted Kasepersky Definitions in GWAVA, that we setup something
that alerts them when new emails have no come into the receive folder from
externally within a 15 minute time frame during working hours.
I am trying to do this in a way that will not completely bog down the system
and not produce too many false positives.
Do you guys have a method you prefer for doing this?
Cheers

On 1/31/2012 3:11 PM, Andre Southgate wrote:
> Hi There!
>
>
> I have been asked by a client who recently had an outage of inbound emails
> due to corrupted Kasepersky Definitions in GWAVA, that we setup something
> that alerts them when new emails have no come into the receive folder from
> externally within a 15 minute time frame during working hours.
>
> I am trying to do this in a way that will not completely bog down the system
> and not produce too many false positives.
>
> Do you guys have a method you prefer for doing this?
>
> Cheers
>
Actually I think Redline can do that.But if you want something else, any
SNMP compliant solution might do the trick.
(Simply sampling the gwia\receive directory of course is prone to false
positives).
Alternatively linux bash it: cron an MAIL command to some internal
address then use fetchmail or getmail to pop it. If it doesn't come
through, do an alert somehow. (What to use in this case is tricky!)

Running OSX10.6.8 two email account thru Roadrunner. Both accounts now indicate email sent but they never arrive. Can get inbound email. this start for one account 5 days ago and yesterday for the second account. any suggestions?

Running OSX10.6.8 two email account thru Roadrunner. Both accounts now indicate email sent but they never arrive. Can get inbound email. this started for one account 5 days ago and yesterday for the second account. any suggestions?

When we returned from a weekend trip, both emails were working. The obvious answer [to me anyway] is that the problem was with Roadrunner, not our minimac. The chances of finding out what the problem was with Roadrunner are slim and none.

Reducing kb size for uploading/emails

Hi there,
I have not had my new iMac long and am still getting the hang of using iPhoto and am a bit of a techno dodo at times.
My problem is that I have no idea how to reduce photos in pixel/kb size for uploading onto the web and for emailing to freinds and family.
I have tried using help but not getting very far.
I know there is probably a very easy answer to this, it is just that I have missed it somewhere.
Thankyou for your help.
iMac Mac OS X (10.4.9)

loopylucy
What are you using for E Mail? If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto, and that process allows yo to scale the pics.
If you're using anything else, then select the pic in the iPhoto Window and go File -> Export. In the export dialogue you have the opportunity to scale the pics, among other things. Then complete the export to the desktop and upload that copy. After the upload or e mail is finished you can trash the copy on the desktop - your original is safe in iPhoto.
Regards
TD

Inbound Email for Upload attachment

Similar Messages

Maybe you are looking for