Inbound IDOC missing

Hi ,
We are testing idocs between two clients of a system ABD, between ABDCLNT100 and ABDCLNT200.
The sender is client ABDCLNT200 and receiver is client ABDCLNT100. The outbound process was successful in client 200 but we cannot see the inbound idocs in the receiving client 100. The status of the outbound IDOC in client 200 is 03.
Could anyone please let me know all the checks I need to do in client 100 to find out why the IDOC is not posted or why we cannot even see the inbound idoc in 100.
Thanks
Swetha

Hello
sm58 in the sender to see if there are any rfc errors.
sm59 to ensure that the rfc connections between the two clients are working.
bd64 to make sure that the definition of the distribution model is correct.
Regards
Greg Kern

Similar Messages

  • Inbound IDOC missing some values

    Hi ,
    We got few fields in the IDOC which are populated at the sender side of the IDOC but when it comes to XI we dont see those fields populated in the payload at the sender. Any idea on what could be wrong. I have checked the mapping in XI and the sender has the 2 fields in the IDOC. Trying to figure out where it went wrong.

    @ Srinivas - If there is problem with metadata, there will error message here is not the case.
    actually if there is a field generated on the IDOC it has to come to XI in the source payload.
    check this.
    Idoc Payload incorrect
    Edited by: Venkat Anusuri on May 18, 2009 4:46 PM

  • RCVPOR is missing the Inbound IDoc

    Hi all,
    I am getting IDoc from the XI with the status code 56.
    I found that receipt port is missing in the control record.
    If I use sender partner type as LS, it is working fine. When I use the sender partner type as KU IDocs are not getting posted successfully, the port for the recipient information in the control record of the inbound IDoc is empty and all other filled are filled.
    Any suggestions please
    Thank you
    Regards
    Harsha

    Dear Harsha,
    can you explain how you solved the issue - I am experiencing exactly the same problem. I am receiving the same Message type from several other systems (not LI, but LS), and we are receiving other message types for the same partner. -> in all other cases the RCVPOR is filled correctly.
    We are using webMethods and not XI, the RCVPOR is sent correctly by the middleware.
    brg Karl

  • Inbound IDoc: Field BVTYP is missing

    Hi, 
    I am new to IDoc I need help with a scenario. We have an interface wherein AP documents are transported to SAP. When we are viewing these IDocs in SAP field BVTYP  (Partner Bank Type) is missing
    Thanks in advance

    Hi,
    Are you dealing with inbound or outbound IDoc for sales order?
    I am a bit confused ... you mentioned the IDoc successfully posted (inbound IDoc?) however outsource EDI team reported that field ZEILE is missing (outbound IDoc?)
    Regards,
    Ferry Lianto

  • ** Inbound IDoc - One field is missing but it is displayed in SXI_MONITOR

    Hi Friends,
    We have  developed IDoc to IDoc scenario. Source IDoc is sent from 3rd party system. Target is an Z IDoc (Replica of VEHCLE01 IDoc). 
    When we test the source IDoc XML from RWB, the message processed successfully in SXI_MONITOR and target IDoc is also created in backend SAP system. But, the problem is that, in target payload there are 5 fields. But, in the physical idoc created in SAP system has only 4 fields. The last field is missing.
    Since it is inbound IDoc, I deleted the IDoc meta data in IDX2 txn, and reimported again the Z IDoc. But, again the same problem is coming. i.e one field is missing in inbound IDoc. But, in the receiver payload, that field is there with value.
    Kindly clarify, friends.
    Kind Regards,
    Jegathees P.

    HI,
    If that field is missing for first time in R3 means(ie Receiver system, Idoc posting in we02) , then
    XI side:
    1. u have check whether that field is existing in Target Interface,Target Message in Interface Mapping
    2. Make sure that u have mapped that field in Message Mapping.
    R3 (receiver side)
    1. Plz check we30 , whether that field is there for that ZIdoc structure
    2. Take the same Idoc which got posted , test in we19 whether that Idoc getting posted with that field or not?
    check whether ur Idoc structure is activated in XI
    Thanks
    Praba

  • Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

    Hello,
    the above segment is missing in the inbound idoc - basic type pexr2002.
    I have checked in TC-we30 and its available there.
    but still the idoc is getting generated without this segment.
    can someone suggest.
    thanks
    Arun

    Hi All,
    I have a similar query to that of Penny. We are able to get the standard IDOC to generate with segment E1IDBW1. It contains the standard fields INPWEEMP, INPWTXT1, INPWTXT2. However, we have a requirement to manipulate the standard contents of these fields. We wanted to use user exit EXIT_SAPLIEDP_002 to do this.
    I have maintained user exit EXIT_SAPLIEDP_002 but when we enter this on creation of the IDOC the segment E1IDBW1 does not seem to be available in table EDIDD_TABLE for manipulation. Can you advise please if (1) you were able to get E1IDBW1 available to edit in exit EXIT_SAPLIEDP_002  and (2) were you able to manipulate the contents of INPWTXT1, INPWTXT2 etc?
    We have done the following steps:
    - BTE 2441 is available on our release
    - house bank has been setup as an In House Cash Center which allows E1IDBW1 to be generated
    - entry has been maintained in table FEDICUS with Message Type = PAYEXT, BasicType = PEXR2002, Extension = Blank, Seg Type = E1IDBW1
    - code maintained in ZXF08U04
    The system enters ZXF08U04 but E1IDBW1 is not available there for manipulation.
    Can you advise what we might be missing please?
    Thanks and regards
    Mike

  • Essential Transfer Parameters Missing in record during Inbound IDOC process

    Dear Gurus
    We are creating a Inbound delivery in one system, we have made all the custom settings for IDOC processing for inbound and outbound idoc in both the systems. Upon the execution of inbound delivery, the system 
    During the Inound delivery processing, the outbound IDOC is successfully distributed. However in the receving system, the IDOC is not posted and it throws the below erroe\r
    Essential transfer parameters are missing in record: 0180000055 000010 / Mess number 561 and message type E
    We are using Outbound IDOC mess type DESADV basic type DELVRY01 process code DELV with FM IDOC_OUT PUT_DELVRY
    In the receiving system message type DESADV , process code DELS, and FM IDOC_INPUT_DESADV1
    What is that which is going wrong.
    Please help me out
    Thanks

    Hello
    To create inbound delivery from outbound delivery, use following setting -
    Outbound idoc -
    idoc type - DESADV01
    message type - DESADV
    Process code - SD05
    FM - IDOC_OUTPUT_DESADV01
    Inbound iDOC -
    Message Type - DESADV
    Process Code - DESA
    FM - IDOC_INPUT_DESADV
    Idoc Type - DESADV01

  • Message variant is missing in INBOUND IDOC.

    hi,
    Any one can help on this issue?
    The sender has confirmed that message variant was filled in outgoing file.
    However, When we received this Inbound IDOC, the message variant is blank.
    I still am confused by two questions:
    1. The function module which insert record into table EDIDC and EDIDD,  is same as the function module which post this IDOC to sap module(normally we maintained it in WE57)
    2. We normally need to maintained in WE57, but also need create one processing code,  what is relationship between WE57 and processing code(WE42)

    Hi,
    Message Type/Message Variant needs to be maintained in WE20 ( Partner Profiles). In case of inbound IDOC ( receiving the data other systems) Data processing/posting will happens via function module. the function module will attach to the process code.
    Process Code : The IDoc interface uses the process code to find the business process which controls the conversion of the IDoc into the SAP document.
    The Process code will assign to the function module in WE42, the same function module will assign to the Message type and Idoc type in WE57
    In a short summary, The Function module required to post the Idoc/update the data in SAP. However the Function module should process specific to the Message type and Idoc type only. It means the settings is required to identrify the correct function module to process the Inbound Idocs.
    Whenever there is a problem with ALE setting the message 64 will trigger, it means the IDOC is ready to transfer to the application ( process through FM ). 
    Thanks,
    Kiran.

  • Inbound IDOC basic type HRMD_A07: Why no validation available?

    I am using a standard inbound IDOC basic type HRMD_A07 to update employee master data (IT0000 & IT0001). However, i found out that this IDOC just directly updates to the infotypes without any validation. For example, i provide an invalid company code (BUKRS) and personnel area (WERKS), the IDOC still updates into database without any proper validation.  
    Filled the following fields in the IDOC segments:
    E1PLOGI
    plvar=01, otype=P, objid=00000001, opera=I
    E1PITYP
    plvar=01, otype=P, objid=00000001, infty=0000, begda=20120101, endda=99991231
    E1P0000
    pernr=00000001, infty=0000, endda=99991231, begda=20120101, massn=01, massg=01, stat1=3, stat2=3
    E1PITYP
    plvar=01, otype=P, objid=00000001, infty=0001, begda=20120101, endda=99991231
    E1P0001
    pernr=00000001, infty=0001, endda=99991231, begda=20120101, bukrs=XXXX, werks=XXXX, persg=1, persk=EC, abkrs=99, plans=00000111, otype=S
    Please help me out in case I am missing something. Thanks.

    Additional Info:
    In WE21 at the TRFC Port, it is possible to set this Option:
    Send Only Fields of Selected Segment Version
    The segment data of the IDoc is passed to this port with the length matching the segment definition of the release specified in the partner profile.
    But if we are using an reduced message type, all fields of the newest release are in the segement.
    The docu tells that this will be done in function EDI_DOCUMENT_OPEN_FOR_CREATE.
    But it is never called when createing an material IDOC with BD10.
    Bug or feature?
    Kind regards
    Manuel

  • Inbound IDoc(HRMD_A07) problem in delimiting the infotype records

    Hi All,
    I am using Inbound IDoc (HRMD_A07) approach to update infotypes. I found that I am able to create a record in an infotype, but there is a problem in delimiting the infotype.
    Please help me out in case I am missing something.
    Thanks,
    ABAP_DEV

    Hi,
    Did you get this resolved. Even i'm facing this issue. Is it a config or do we have to do something in the IDOC.
    Thanks,
    Jilly

  • Inbound IDOC with UNICODE issues

    We are trying to send in an IDOC with Romanian characters that are outside of latin-1.  We have upgraded our 4.7 SAP system to be UNICODE, but when loading these characters via IDOC they are not being represented correctly in R/3.  We have tried setting our login language to RO when doing the input and it doesn't seem to matter.  Is there a setting somewhere that we are missing to designate an inbound IDOC as UTF-8?
    TIA...
    Darrin

    Hi Darrin,
    if the sender of the IDOC is an external RFC program, you should use the "Codepage" parameter in the logon string, to declare your character set. The SAP RFC lib will then translate between external and R/3 internal codepage.
    If you find my answer useful, please don't forget the reward.
    Regards,
    Juergen

  • Inbound Idoc - permitted agents

    In my inbound IDOC my partner profile permitted agents do not get a work item when the IDOC does not post due to some error. I seem to recall that some work needed to be done with the organization structure. Can you point me in the right direction as to which steps I may have missed?
    Thanks

    Hi Raynald,
    Next step is to check with transaction SWETYPV if the type linkage for IDOCAPPL and event INPUTERROROCCURRED has been activated.
    If this is the case you will find workitems for this task in the monitor (use transaction SWI2_FREQ) whenever an IDoc with status 51 has arrived for your message type.
    Could you please check is the type linkage is active and if so wether or not work items have been created?
    Regards,
    John.

  • Inbound idoc pordcr101 status 51 "enter purchase org"

    in the we19 standard inbound for idoc  pordcr101 i see the following
    EDIDC  with the partner/port info
    E1PORDCR1
      E1BPMEPOHEADER
        comp_code 300
        doc_type "NB"
        vendor  58121
        purch_ord 3000
        purch_group 000
      E1BPMEPOHEADERX
        'X' next to respective fields
      E1BPMEPOITEM
         po_item  00010
         Material  scw1212
         Plant    3000
         qty       1000
      E1BPMEPOITEMX
         'X' next to respective fields
    Each time i run the inbound idoc pordcr101 in we19 with the above i get
    enter purch org
    i am really really stuck because i am entering purchase org but for some reason it does not know about it
    what am i missing
    HELP
    I deleted the unused segments

    no successful idocs in we19 up to this point
    i was told
    E1BPMEPOHEADERX  'X' next to respective fields this is used to indicate which fields are being input.
    so i am using both
    it is purch_org  not purch_ord

  • Inbound IDOC Posting

    I am developing a function module in ECC that will be used to post inbound IDOC for customer creation DEBMAS07
    The logic is as follows -
    The function receives an IDOC structure
    It then invokes function module 'IDOC_INPUT_DEBITOR'
    IDOC_INPUT_DEBITOR takes care of creating a new customer in table KNA1. But I was expecting IDOC_INPUT_DEBITOR to also handle the IDOC posting. This way I can go to WE02 and see a new IDOC record. What am I missing? Is there some more code I need to write after the function module call?
    Thank you.
    * IDOC structures for using ALE
         data       lc_no_display         type bdwfap_par-inputmethd value ' '.
         data       lt_idoc_control       type standard table of edidc.
         data       ls_idoc_control       type edidc.
         data       lt_idoc_data          type standard table of edidd.
         data       lt_idoc_data_knvi     type standard table of edidd.
         data       lt_idoc_status        type standard table of bdidocstat.
         data       ls_idoc_status        type bdidocstat.
         data       lt_return_variables   type standard table of bdwfretvar.
         data       lt_serialization_info type standard table of bdi_ser.
         data       lv_workflow_result    type bdwf_param-result.
         data       pi_idoctyp            type edi_iapi00-idoctyp.
         data       pt_segments           type standard table of edi_iapi11.
         data       lw_segments           type edi_iapi11.
         data       ls_idoc_data          type edidd.
         data       ls_e1kna1m            type  zdebmas07_e1kna1m.
         data       e1kna1m               type e1kna1m.
    *** CONTROL DATA
         ls_idoc_control-mandt  = input-idoc-edi_dc40-mandt.
         ls_idoc_control-status = input-idoc-edi_dc40-status.
         ls_idoc_control-doctyp = input-idoc-edi_dc40-idoctyp.
         ls_idoc_control-direct = input-idoc-edi_dc40-outmod.
         ls_idoc_control-rcvprt = input-idoc-edi_dc40-rcvprt.
         ls_idoc_control-rcvprn = input-idoc-edi_dc40-rcvprn.
         ls_idoc_control-stdmes = input-idoc-edi_dc40-stdmes.
         ls_idoc_control-outmod = input-idoc-edi_dc40-outmod.
         ls_idoc_control-sndpor = input-idoc-edi_dc40-sndpor.
         ls_idoc_control-sndprt = input-idoc-edi_dc40-sndprt.
         ls_idoc_control-sndprn = input-idoc-edi_dc40-sndprn.
         ls_idoc_control-mestyp = input-idoc-edi_dc40-mestyp.
         ls_idoc_control-idoctp = input-idoc-edi_dc40-idoctyp.
         append ls_idoc_control to lt_idoc_control.
    *** READ SEGMENTS
         pi_idoctyp = ls_idoc_control-idoctp.
         call function 'IDOCTYPE_READ_COMPLETE'
           exporting
             pi_idoctyp         = pi_idoctyp
           tables
             pt_segments        = pt_segments
           exceptions
             object_unknown     = 1
             segment_unknown    = 2
             relation_not_found = 3
             others             = 4.
         loop at pt_segments into lw_segments.
           case lw_segments-segmenttyp.
             when 'E1KNA1M'.
               ls_idoc_data-segnam = 'E1KNA1M'.
               ls_idoc_data-mandt  = sy-mandt.
               ls_idoc_data-segnum = lw_segments-nr.
               ls_idoc_data-psgnum = lw_segments-parpno.
               ls_e1kna1m          = input-idoc-e1kna1m.
               move-corresponding ls_e1kna1m to e1kna1m.
               move e1kna1m to ls_idoc_data-sdata.
               append ls_idoc_data to lt_idoc_data.
               exit.
           endcase.
         endloop.
    *** IDOC INPUT CALL FUNCTION
         data: response type zsi_create_customer_is_res_tab.
         data: response_lwa type zsi_create_customer_is_respons.
         data: lwa_error_message type string.
         call function 'IDOC_INPUT_DEBITOR'
           exporting
             input_method          = lc_no_display
             mass_processing       = space
           importing
             workflow_result       = lv_workflow_result
           tables
             idoc_contrl           = lt_idoc_control
             idoc_data             = lt_idoc_data
             idoc_status           = lt_idoc_status
             return_variables      = lt_return_variables
             serialization_info    = lt_serialization_info
           exceptions
             wrong_function_called = 1
    others                = 2.

    Hello Megan,
    Check with the function modules
    EDI_DATA_INCOMING
    IDOC_WRITE_AND_START_INBOUND
    Program:
    RBDAPP01
    I guess this would answer your query.
    Regards,
    TP

  • Inbound Idoc segment change

    Hi All,
    How can We modify or append a segment to the inbound IDOC. The scenario is as follow
    We have an inbound IDOC to create/change contract order. There are some segments in the IDOC to hold the error records.
    while processing the inbound IDOC we need to fill these blank segments with relevant data, so that we can reprocess the IDOC with ease.
    I am trying the modify the IDOC_DATA inside the processing function module. Till the end of the function module IDOC_DATA is having the added segment data, however when I am checking from WE02, the segments are appearing to be blank.
    Please let me know, what is missing above.
    Thanks & Regards
    D. Pradhan

    Which exit / BAdI are yous using for adding the segment & what is your inbound processing function module ?
    Anyways i also had the same problem a few weeks back i was trying to delete a segement though
    My understanding is in WE02 it displays the data from EDIDC & EDIDD. In your I/B processing FM you only modify the data in the IDOC_DATA table & not in EDIDD.
    Check in EDIDD, the segment would not be there.
    BR,
    Suhas

Maybe you are looking for