Message variant is missing in INBOUND IDOC.

hi,
Any one can help on this issue?
The sender has confirmed that message variant was filled in outgoing file.
However, When we received this Inbound IDOC, the message variant is blank.
I still am confused by two questions:
1. The function module which insert record into table EDIDC and EDIDD, is same as the function module which post this IDOC to sap module(normally we maintained it in WE57)
2. We normally need to maintained in WE57, but also need create one processing code, what is relationship between WE57 and processing code(WE42)

Hi,
Message Type/Message Variant needs to be maintained in WE20 ( Partner Profiles). In case of inbound IDOC ( receiving the data other systems) Data processing/posting will happens via function module. the function module will attach to the process code.
Process Code : The IDoc interface uses the process code to find the business process which controls the conversion of the IDoc into the SAP document.
The Process code will assign to the function module in WE42, the same function module will assign to the Message type and Idoc type in WE57
In a short summary, The Function module required to post the Idoc/update the data in SAP. However the Function module should process specific to the Message type and Idoc type only. It means the settings is required to identrify the correct function module to process the Inbound Idocs.
Whenever there is a problem with ALE setting the message 64 will trigger, it means the IDOC is ready to transfer to the application ( process through FM ).
Thanks,
Kiran.

Similar Messages

RCVPOR is missing the Inbound IDoc

Hi all,
I am getting IDoc from the XI with the status code 56.
I found that receipt port is missing in the control record.
If I use sender partner type as LS, it is working fine. When I use the sender partner type as KU IDocs are not getting posted successfully, the port for the recipient information in the control record of the inbound IDoc is empty and all other filled are filled.
Any suggestions please
Thank you
Regards
Harsha

Dear Harsha,
can you explain how you solved the issue - I am experiencing exactly the same problem. I am receiving the same Message type from several other systems (not LI, but LS), and we are receiving other message types for the same partner. -> in all other cases the RCVPOR is filled correctly.
We are using webMethods and not XI, the RCVPOR is sent correctly by the middleware.
brg Karl

Prevent the Output Message when creating PO from inbound IDOC

Hi SAP Gurus,
In my project, I have to create PO from inbound IDOC (PORDCR) with a specific Document Type ('099').
Requirement: These PO should not generate the output message while the others (Doc Type # '099') do.
I have the Z fuction module which call BAPI_PO_CREATE for posting IDOC and it works fine.
In the existing system, there are some set up that trigger the output message type for PO (output NEU) when using ME21 or ME22, as a result my PO created with output message.
Can you please advise if there are some way (User Exit?) that prevent the output message in this scenario (specific PO Type) without touching the current Condition setup?
I'm new in MM and really need help!
Thanks,
Elaine.

Hi Vinod,
I really appreciate your anwer. I'm going to explore this with my functional consultant.
Just like to have more questions:
1. Is it easier if we change the existing condition table instead of creating a new routine?
2. There are two forms for routine 101 (FORM KOBEV_101 and FORM KOBED_101). Can you explain to me why we need 2 here for what purpose of each form.
3. In the debug mode by using WE19 to post inbound IDOC, I change the SY-SUBRC = 4 and PO created without output message. Is it the right direction? Anything else I need to pay attention to?
Thanks again.
Regards,
Elaine.

Receiver port missing in inbound idoc

Hi All,
I am posting idocs from XI to R/3. All the ALE settings have been done correctly. Idocs were being posted to R/3 successfully, however suddenly the idocs started failing in R/3 with error: EDI: Partner profile inbound not available
When i checked the control record for the errored idocs i found that the receiver port is missing. I am not sure why this is happening as in the idoc adapter we have provided this and also the idocs were being posted successfully with the same setting.
Pls help to find the root cause for this problem.
Further what would be the best way to reprocess these failed idocs? The number is huge around - 30,000 hence manual processing through we19 is not possible. Also BD87 cannot be used as i need to edit the idoc to add the receiver port information before reprocessing.
Kindly suggest. Any help in this regards would be welcome.
Thanks
Anand Chavan

hi
Go thru the below blogs
check the partner profile settings
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/frameset.htm
Idocu2019s not posted in the receiver SAP Systemsu2026.
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
Troubleshooting File-to-IDOC Scenario in XI.
Troubleshooting File-to-IDOC Scenario in XI.
reward points if helpfull
regards
kummari

** Inbound IDoc - One field is missing but it is displayed in SXI_MONITOR

Hi Friends,
We have developed IDoc to IDoc scenario. Source IDoc is sent from 3rd party system. Target is an Z IDoc (Replica of VEHCLE01 IDoc).
When we test the source IDoc XML from RWB, the message processed successfully in SXI_MONITOR and target IDoc is also created in backend SAP system. But, the problem is that, in target payload there are 5 fields. But, in the physical idoc created in SAP system has only 4 fields. The last field is missing.
Since it is inbound IDoc, I deleted the IDoc meta data in IDX2 txn, and reimported again the Z IDoc. But, again the same problem is coming. i.e one field is missing in inbound IDoc. But, in the receiver payload, that field is there with value.
Kindly clarify, friends.
Kind Regards,
Jegathees P.

HI,
If that field is missing for first time in R3 means(ie Receiver system, Idoc posting in we02) , then
XI side:
1. u have check whether that field is existing in Target Interface,Target Message in Interface Mapping
2. Make sure that u have mapped that field in Message Mapping.
R3 (receiver side)
1. Plz check we30 , whether that field is there for that ZIdoc structure
2. Take the same Idoc which got posted , test in we19 whether that Idoc getting posted with that field or not?
check whether ur Idoc structure is activated in XI
Thanks
Praba

How to block the status mail for an inbound Idoc to a specific user

Hi,
I have to stop sending the error status mail to a specific user depenidng on Partner Type. This will trigger when an inbound Idoc contains status error(message type INVOIC &ORDRSP).This user needs other mails which are getting triggered with the same Idoc for the same partner. Basically, the requirement is to block only the status mail for that user. The statndard task for this is TS70008125 and it uses the agent determination rule 30000001 (Idoc Administrator).in WE46, this task is assigned to process code EDIR. I have copied the task to a custom task and changed the agent determination rule. I would like to know how will I configure this task so that this custom task will trigger for the status error, without altering other workflows for the same message type & the partner type. Or is there any other way to block the mail?
Thanks,
Santosh

Hi,
I have done the required coding to exclude the specific agent from the rule,copied the task and its ready. My question is how do I map this custom task to a particular partner type, for the message type INVOIC in WE20? (The message type used for the inbound Idoc is INVOIC). I checked the Partner profile in WE20. Most of the process code is using function module as the processing type.
Thanks,
Santosh

Inbound IDoc using LSMW

Hi..
I am trying To Upload customer master data using LSMW with IDOc.
I am debugging the Inbound IDoc Using BD87 and INPUT_METHOD = 'A'
One segment E1KNB1M data is not passed to transaction 'XD01' due that my company code data is not updated
Pls tell me how to pass segment E1KNB1M data to transaction.
I am using Message type : /SAPSLL/DEBMAS_SLL
           Idoc type    : Debmas03
        Function Module : IDOC_INPUT_DEBITOR

Hi Rishi,
     Thanks for the document. But the document mainly concentrates on LSMW(I'm aware of generic LSMW with BDC), it doesn't explain the inbound IDoc, segment merging, Creation of partner function or Message and Basic types WRT inbound IDoc. Please send any document with that relevance.
Kiran

Error determining posting period(infostructure S008,Variant Z2,RC3) while creating Sales orders from Inbound IDOCS

Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan

Thank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan

XML message mapping considering idoc message variant

Dear Experts,
I am very new to PI. I am working on a scenario where I need to map VGON_OUT xml message from SNC system to ORDRSP.ORDERS05 inbound idoc of ECC 6.0 system.
The issue is :
In the inbound partner profile in ECC there are two ordersp message types. one with message variant SMI and another without any message variant.
Both of them are using different process codes for processing.
So my question is how to map the VGON_out xml message in PI?
Please note: the key difference is the idoc message variant.
There is no way to merge both of these message types as their function is serving two different purposes.
I have attached the xml file and the screenshot of the partner profile here.
Any suggestion or reference link or document would be deeply appreciated.
Thanks in advance.
Praty

Hi Pratyusa,
Did you try with different partner profiles for each ORDRSP?
Regards,
Krupa

Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

Hello,
the above segment is missing in the inbound idoc - basic type pexr2002.
I have checked in TC-we30 and its available there.
but still the idoc is getting generated without this segment.
can someone suggest.
thanks
Arun

Hi All,
I have a similar query to that of Penny. We are able to get the standard IDOC to generate with segment E1IDBW1. It contains the standard fields INPWEEMP, INPWTXT1, INPWTXT2. However, we have a requirement to manipulate the standard contents of these fields. We wanted to use user exit EXIT_SAPLIEDP_002 to do this.
I have maintained user exit EXIT_SAPLIEDP_002 but when we enter this on creation of the IDOC the segment E1IDBW1 does not seem to be available in table EDIDD_TABLE for manipulation. Can you advise please if (1) you were able to get E1IDBW1 available to edit in exit EXIT_SAPLIEDP_002 and (2) were you able to manipulate the contents of INPWTXT1, INPWTXT2 etc?
We have done the following steps:
- BTE 2441 is available on our release
- house bank has been setup as an In House Cash Center which allows E1IDBW1 to be generated
- entry has been maintained in table FEDICUS with Message Type = PAYEXT, BasicType = PEXR2002, Extension = Blank, Seg Type = E1IDBW1
- code maintained in ZXF08U04
The system enters ZXF08U04 but E1IDBW1 is not available there for manipulation.
Can you advise what we might be missing please?
Thanks and regards
Mike

Essential Transfer Parameters Missing in record during Inbound IDOC process

Dear Gurus
We are creating a Inbound delivery in one system, we have made all the custom settings for IDOC processing for inbound and outbound idoc in both the systems. Upon the execution of inbound delivery, the system
During the Inound delivery processing, the outbound IDOC is successfully distributed. However in the receving system, the IDOC is not posted and it throws the below erroe\r
Essential transfer parameters are missing in record: 0180000055 000010 / Mess number 561 and message type E
We are using Outbound IDOC mess type DESADV basic type DELVRY01 process code DELV with FM IDOC_OUT PUT_DELVRY
In the receiving system message type DESADV , process code DELS, and FM IDOC_INPUT_DESADV1
What is that which is going wrong.
Please help me out
Thanks

Hello
To create inbound delivery from outbound delivery, use following setting -
Outbound idoc -
idoc type - DESADV01
message type - DESADV
Process code - SD05
FM - IDOC_OUTPUT_DESADV01
Inbound iDOC -
Message Type - DESADV
Process Code - DESA
FM - IDOC_INPUT_DESADV
Idoc Type - DESADV01

EDI: Partner profile inbound not available - message variant

Hi Friends,
I am gettin error "EDI: Partner profile inbound not available" when sending message from XI to R/3 on R/3 side.
I checked to partner profile and it is correctly maintaind .
One thing I noticed is in the control record of that idoc,under typeinfo tab, message type is orders and message variant is ALW. I dont knw what this message vaeiant means,n where it came from, but when i process idoc in we19 by removing this message variant, its working properly..
give ur suggestions.
Thanks........

Hi Kiran,
Check your Partner Profile Message Settings in we20.
[Error: "EDI: Partner profile inbound not available";
Regards,
RajeshKumar.D

Outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON

Hi Friends
I am trying to pack outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON.
But IDOC has error Specification of destination HU missing.
Could you please help us to resolve the issue to Pack the outbound delivery with the IDOC.
Thanks
SR

HI Ian Kehoe
Sorry for delay in reply
Thanks you very much
I solved that problem .
Could you please advice test data for IDOC DELVRY06 packing hierarchy (multi level packing) to pack SAP outbound delivery.
Thanks
Ravi

Error while trying to post inbound idoc of message type COND_A

Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
Mohit

I do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated.

Inbound IDoc w/message ORDERS - issues with error processing

We are using inbound IDoc ORDERS05 with message type ORDERS to create the sales orders in SAP. In WE20 we have the following settings:
- partner type LS (= Sales Org VKORG)
- process code ORDE
- trigger by background program
- post-processing agent of type US (user) with a user ID.
We create IDocs through an ABAP program and use RBDAPP01 to post the IDocs. When there is an application error in the IDoc posting we expect the designated user to receive a workflow item in the SAP Inbox, but for some reason this is not happening.
I did some research and went through all the possible settings for workflow, task, etc. and everything seems to be set up correctly. When debugging RBDAPP01 I have noticed that it calls FM APPLICATION_IDOC_POST_IMMEDIAT, which, in turn, calls IDOC_START_INBOUND. If IDOC_START_INBOUND returns SY-SUBRC = 1 then the workflow item is sent correctly to the designated user, exactly as we want. But for some reason it returns 0 (I changed it to 1 in the debugger).
It seems that IDOC_START_INBOUND reads TEDE2 records (TEVE2-EVCODE = ORDE) and sy-subrc = 1 is only possible when EDIVR2 is 1,2,3 or 4. In our case TEDE2-EDIVR2 = 6. It seems that TEDE2 is maintained in the transaction WE42. However, I tried to change the settings there but it affects the IDoc processing in whole (IDoc gets some odd status and doesn't get processed as before). I've also tried to use process code ORDE_BY_WORKFLOW in WE20 with the same "success".
What do we need to do to get a workflow item for the errors that happen in the application layer when IDoc is posted? Is it even possible with this message type?
Any ideas would be appreciated.

Hi,
Can you please share how do you overcome the problem, so that it can be helpful for others.

Message variant is missing in INBOUND IDOC.

Similar Messages

Maybe you are looking for