Inbound Process Code for ARTMAS

Hello,
Can any body help me which Inbound Process Code I need to use for Message type ARTMAS.
When I used process code AFSA, Idoc created with status 51 and it says Function module not allowed: AFS_RETAIL_ARTMAS_IDOC_INPUT
We are using SAP Retail 4.6C version
Thanks in Advance,
Regards,
Murali

Hello,
Let me explain the Issue again,
I have two system, One is pre production and other one is Quality system. Both are SAP Retail systems
Article Master data is maintained in Pre Production, now we are trying to get this to Quality system.
I have made the follwoing settings in
Pre production: (Sender)
1. WE20 Maintained Partner Profile (LS)
2. BD64 Maintained ALE setting (ARTMAS is defined as a
BAPI: RetailMaterial.Clone)
Quality: (Receiver)
1. WE20 Maintained Partner Profile (LS)
2. I have tried the Process code AFSA, MATA, MAT2 in the Inbound permeate, however Idoc is still in Status 51.
In the Sender system Idoc is created and the status is 03
In the Receiving system Idoc is created and the Status is 51.
Error says Function module not allowed and the application object type which were determined are not valid for this IDoc I have tried with Process code AFSA, MATA, MAT2 however I have same problem.
Please help me which functional module I need to use for creating Article in SAP Retail system.
Regards,
Murali

Similar Messages

Inbound process code for LOIPRO

Hi,
Can anyone tell me the inbound process code used for LOIPRO(Production Order)message type?
Regards,
Jeyananth

Hi,
Inbound process code used for LOIPRO(Production Order)message type are
ABI_AIDN_IN
ED00
ED00_XML
ED08

Inbound Process Codes for LOIWCS and LOIROU

We are trying do ALE for Workcenters and Routings using tcode: POIM.
What are the inbound process codes that i need to setup in the partner profile?
Thanks for the help.
Gopi.

Hi John,
thank you very much.
1. I created a new program which use program ROUTING_CREATE_SAMPLE_FILE to create a idoc.
*& Report ZALEROUTE
REPORT ZALEROUTE.
DATA: seltab    TYPE RANGE OF i,
           rspar     TYPE TABLE OF rsparams.
SELECTION-SCREEN BEGIN OF BLOCK selection WITH FRAME TITLE text-001.
   PARAMETERS: receiver LIKE tbdlst-logsys.
   rspar = VALUE #(
        ( selname = 'RECEIVER'
          kind = 'S'
          sign = 'E'
          option = 'BT'
          low = receiver ) ).
   SELECTION-SCREEN END OF   BLOCK selection.
   submit ROUTING_CREATE_SAMPLE_FILE VIA SELECTION-SCREEN with SELECTION-TABLE rspar.
2. In BD64 I created BAPI Object ROUTING Method Create
3. In BD64 I created Partner agreement via Enviroment
4. In WE42 I assigned message type routing_create to process code BAPI
Kind regards,
Herbert

IDOC DEBMDM and inbound process code

Hi ya.
Do you know if there is a standard inbound process code for IDOC DEBMDM in R3?
Regards
Agnieszka

I can not make it working at the moment. I am getting message: IDOC_INPUT_DEBITOR_MDM called up.
I can not find an error in my config at the moment.
Function module IDOC_INPUT_DEBITOR_MDM is assigned to message type DEBMDM and IDOC DEBMDM06.
Any clues ?

Process code for Idoc BANK_CREATE01 and BANK_CHANGE01

hi,
I want to create partner profile for Idoc BANK_CREATE01 and BANK_CHANGE01 standard Idocs.
But in transaction we64 , i am not finding the inbound process code for it.
So di i have to create a process code for it??
If yes , how do i create it and also the function module to be created.
kindly help.
Regards,
Loveena

hi ,
To create a partner profile Tcode WE20.
for your inbound or outbound idocs , just add these idocs in outbound or inbound parameters . For Idoc to File or File to Idoc , it is sufficient.
before creating partner profile you have to create port Tcode WE21
hope this will help
regards
HONEY

Process Code for Message Type LOIPRO(in ALE/IDOCS)

Hi all,
I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
Thanking you in advance,
anjaly

Hi
it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
There all LOI* idocs are mentioned and then they say:
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
So, in short, there is no inbound process code for LOIPRO.
Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
Regards,
Joe
Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM

IDOC: LOIPRO, inbound Process Code?

Hello everyone,
I'm trying to create a Production Order using IDOC: LOIPRO. I'm in the process of configuring the Partner Profile and I need to define the inbound Process Code for message type: LOIPRO. Does anyone know which Process Code to use for that message type?
Warm regards,
Glenn

Hi Glenn,
Message Type: LOIPRO
Receiver Port: The one created in step u201CDefining a Logical Portu201D
Basic Type: LOIPRO01
if want to more about it pls do chk this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/201769e0-3174-2910-e287-baa58d198246
if found wort pls do te req
Thanx
Sampath

Process code for project

Hii ,
I was just wondering if there was an inbound process code for message type PROJECT . I am trying to generate a inbound partner profile for message type PROJECT and idoc type PROJECT01 . I am not sure what process code should i use . Please tell me
thank you

Hi,
The process code to use with Project/Project01 is 'BAPI' as the interface is based on a Bapi concept.
Regards
JF

How to process inbound process code by populating its value

hi friends,
we have created a inbound process code for ticket creation and actualisation, for process an inbound idoc and we need to test by populating values to it
As i am a newbie to IDOC processing please help me in this regards by giving step by step
thanks in advance
S.Janagar

answered

Process code for inbound idoc's

hi friend,
i want to create a zprocess code for inbound idoc's pls i want to step or code.
regrads and thanks

Hi
Are you using the customised idoc i:e message type .I hope most of the data transfer techniques always has a standard message type and if you are using one such than you can check in transaction we42(inbound process code) .All the steps have been rightly been mentioned for this querry of yours if you can clearly explain as to what message type are you using and for what purpose i can send you with documentation with steps to you.At the end of the day you will be posting idocs so that the data is being reflected in the segments .The things to be noted down is :-
1.Maintain Partner Profile(we20) which is the sender system are you using ?
2.If the satus is 53 it is sucess(green ) else 64(being processed-yellow) or 51(error-red)
3.If you trigger by workflow than you have to use Message Variant .
If you are ok or incase do face any issues please do reply to the forum.
Regards
Somnath

How to write processing code for the Inbound IDOC to the R/3 ??

i m having a file -> XI-->R/3 scenario,
IDOC is being sent from XI to R/3,
can u guide to me to write a processing code for the Inbound IDOC to the R/3,
since i m new to ABAP and ALE technology, can we provide me any blog for doing that.......or guide me....

Hi Sudeep
Simple File to Idoc scenarion blog
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
Also see the blog
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> by Ravikumar.
Configuration of IDOC adapter
http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/frameset.htm
Regards
Santhosh
*Reward points if useful*

Process code for inbound credit Memo

Hi All,
May know what is the process code for inbound Credit Memo (Return of Goods)
Thanks,
Matthew

Hi Gautham,
I checked the IDOC in BD87 tcode and it is saying "Function module not allowed: IDOC_INPUT_ORDRSP".
I gave ORDR as the process code in the inbound parameters of the receiver system partner profile.
In the sender system, I gave me10 as the process code. And there the status is 12, so everything is fine over there.
Vishwa.

Error while creating inbound process code

Hi gurus,Iam creating a custom idoc.
800 -> sender
810 -> Receiver
i have completed outbound processing on 800.
On 810, completed following steps for inbound processing.
1.) I have added my Inbound FM in BD51.
2 ) Assigned my FM to Message type and Idoc type in WE57.
3 ) When adding my FM to process code in BD67, it is showing error that
Entry ZSATPC does not exist in TEDE2 - check your entry.
{ zsatpc is my custom process code }.
4) While Creating Process Code in WE42 with options [processing with ale service / Processing
by FM] and saving it is giving error that
" " is not a valid language.
And when I saw help (?) regarding this error, the following text appeared in a window.
Diagnosis
A key with language "" "" was specified for table "EDE2T". This is not a valid language.
This applies to field "LANGUA"
System Response
The system rejects the key.
Procedure
Enter a valid language. This is usually the language you logged on in.
You logged on in language "EN".
Table T002 contains a list of valid languages.
Please solve this error. Give me steps to create inbound process code.
thanx in advance. Hoping replies soon........
Satish.

Dear Satish,
Very peculiar. The language should come from your log on language. Try to login into the system again. Call we42 again and see if it works.
Regards, Rakesh

Creation of Process code for output type

Hi,
Could someone help me out in defining processcodes for output types.
Thanks in advance,
Yaseen

Hi Yaseen,
The Tr.code WE41 and WE42 are also used for maintaining process codes.
To maintain process codes in WE41 or WE42, Go to these Tr.Codes and Click on the Change button. Then click on "new entries" button to create your new process code.
FYI, Outbound process codes are stored in SAP Table TEDE1 and inbound process codes are stored in SAP Table TEDE2.
Hope this helps.
Rgds,
Sam Raju
Message was edited by: Sam Raju

PROCESS CODE FOR PURCHASE ORDER

Hi Friends,
what is the process code for Purchase order... because i need to creating a partner profile in WE20 in the inbound side.. if iselect message type ORDERS menas.. that related.. process code( for purchase order is not displaying)..
can any of you give me the Message type and that related Process code for purchase order..
thanks
Babu

Hi Babu,
You will find out the all Process Code from WE41 for Outbound & WE42 for Inbound.
The Process code for ORDERS: Purchase order is ME10 for Outbound and you can find it out the message type for Inbound from WE42.
If need more info let me know..
Cheers
Veera

Inbound Process Code for ARTMAS

Similar Messages

Maybe you are looking for