Inbox display - I can no longer see msg content

My inbox window used to display about 10 message subject lines and the contents of whatever message was selected. Now the content part of the window has disappeared and I only have the subject lines. How can I reset this so I can see contents again? Thank you.

Hi vlasta4444: Try this, with the mail program open, go to the bottom of the message window. There you will see a little dot, drag the bottom of the box upward when the icon changes to an arrow with a bar below it. Hopefully this helps.
Stedman

Similar Messages

  • I dropped my ipad and I can no longer see the contents but they're there on itune

    My iPad two was dropped - not hard only from a low table to the floor and it was in a leather case - now I can no longer see the contents on the iPad. I can see the contents in Itune but no display on my pad. Please help!

    Try resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete the "Slide to Unlock" screen will display.
    Cheers,
    GB

  • TS4526 I have 3 of the first generation apple tv's. while they continue to show my library, I can no longer see new content to download in the tv and movie sections?

    I have 3 first generation apple tvs.  I can no longer see new i tunes content to stream any more. How do I fix this?

    After 2-3 days with this problem, it has resolved on its own.  I now have access to movies, tv shows, and music.

  • Upgrade to maverick and I can no longer see the contents of my mail's

    When updating export my messages but I can not see any content.

    hi!,
    see it's link:
    https://discussions.apple.com/thread/2364054?start=15&tstart=0
    thanks

  • Can no longer see old or saved messages in iphone mail inbox

    I updated my phones software yesterday upon request and now i can no longer see old or saved messages in my inbox.  I can see the n ew ones when they arrive, and this problem is restricted only to the inbox as i can see messages in the junk and sent folders fine.
    Hope someone can help!

    Try a reset of the device by pressing and holding the home and power button for 15-20 seconds until the white Apple logo appears.

  • I can no longer see my inbox for texting, only those messages I've sent. How do I get my inbox back?

    I can no longer see my inbox for texting, only those messages I've sent. How do I get my inbox back?

    Tap the Messages button at the top left.

  • I can no longer see my kobo in the ADE. What do I do?

    I can no longer see my kobo in the ADE. What do I do?
    I was able to transfer my library books by downloading and then transferring them to my kobo through ADE. Now when I open my ADE my Kobo doesn't show up but the kobo is connected to my computer and I can see it in my control panel.
    thanks

    VIEW | Style Rendering > Display Styles
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "YBBD" <[email protected]> wrote in message
    news:gnhkjh$7ap$[email protected]..
    > I'm not sure what I did to make this change, but
    previously when I use the
    > property values as opposed to html code to make changes,
    color,
    > formatting,
    > etc, it could be immediately viewed without out going
    out to the browser.
    >
    > I would view with browser and maybe make a few changes
    here and there to
    > html
    > to finess, but primarily I could do all in the design
    layout.
    >
    > Now, even when I color text, it doesn't show until I
    preview in browser.
    > Changes in font size, color, etc, nothing can be seen
    until I go to
    > preview and
    > save.
    >
    > Can anyone tell me what change I made to cause this?
    >
    > Thanks for your help in advance. Sharon
    >

  • HT1399 I just downloaded the newest version of itunes, and when I connect my ipod nano (3rd gen), I can no longer see my playlists (on the left hand side). I hate the new format...any way to revert back to the old one?

    I just downloaded the newest versionof itunes. Now when I plug in my ipod, I can no longer see my playlists (listed on the left hand side). The new format is very confusing! How do I drag and drop songs into specific playlists I have?  Is there a way to revert back to the old itunes?

    I had the same question. Someone answered perfectly here post https://discussions.apple.com/message/20575126#20575126
    The answer was click View > Show sidebar. Devices and playlists will display in the left sidebar once again.

  • Can no longer see my Favorites and Routes on Ovi M...

    I can no longer see the info I have on my E71 on ovi maps - it used to work! 
    After I log on to Ovi and I click on the Favorites tab the data starts to load then stops and the program hangs. It is interesting that I synchronized the phone with ovi maps yesterday and the lower bottom on the ovi Map screen the synch date is CORRECT!
    Any suggestions? I hate to loose all the planning I have already done and it is stored in my E71.

    dunno....could be a gamble...you might have Simple Finder turned on, or accessibilty (for those with vision problems, etc). I think pressing Command+Shift+F8 (that's fn+f8 key) ought to turn it off. If you're really stuck
    command+Shift+3 or command+Shift+4 will let you take a screenshot of your desktop which you might be able to post here. Also, check your views setting (Command+J key) which will let you display icons and stuff)
    maybe you hit that by accident
    good luck
    John B

  • I can no longer see my pointer and pull down windows pop up on everything!!! HELP

    I can no longer see my pointer and when I go to say "applications" a pop up or pull down menu open up...a tiny noe with words. Before a window with icons would open up and I liked that. Its also happening with the internet. instead of having apointer I see nothing and a pull down menu appears. I can't shoose anything because there is no pointer. What setting is this and how do I change it back? I want a normal pointer where I click on link and they open new links then I can type where I click too.

    dunno....could be a gamble...you might have Simple Finder turned on, or accessibilty (for those with vision problems, etc). I think pressing Command+Shift+F8 (that's fn+f8 key) ought to turn it off. If you're really stuck
    command+Shift+3 or command+Shift+4 will let you take a screenshot of your desktop which you might be able to post here. Also, check your views setting (Command+J key) which will let you display icons and stuff)
    maybe you hit that by accident
    good luck
    John B

  • I can no longer see the url for websites in the tool bar

    I can no longer see the url of a website when I use Firefox.
    How do I display it again..

    Do you still have the Navigation Toolbar with the location bar visible?
    *View > Toolbars > Navigation Toolbar
    See also:
    *http://kb.mozillazine.org/Toolbar_customization
    *https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I can no longer see particles in Particle Playground

    I have been creating files in particle playground for months now, but suddenly I can no longer see the particles displayed in the viewer. It is as if the particles have no opacity and they are invisible. But the opacity is at 100%. Why can I not see the particles in particle playground anymore?

    Thanks for responding to my post.  I appreciate that.  In terms of method, I'm simply just trying to see particles emit from the red circle in the center. I merely made a red solid, and then Effect>Simulation>Particle Playground.  I moved 8 seconds in the timeline to demonstrate that there are not any red particles emitting. The particles seem to be invisible.

  • ITunes + Vista = my computer can no longer see my DVDrw drive...

    I just downloaded iTunes 7.6.2.9 onto my Dell Inspiron E1705 - and when I restart my computer, the computer can no longer see my Optical drive (DVDrw). I contacted Dell support, and they changed something in the regedit limits or something(I'm not a techy lol), and my optical drive was back.
    But the next day when I opened iTunes I got a message that says:
    "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
    So I reinstalled iTunes.
    I restarted my computer, and it could no longer see my optical drive AGAIN. My DVDrw drive gets an error that says "This device cannot start (Code 10)." When I check for solutions it says "Could not load driver software."
    I go back to Dell support and tell them my optical drive isn't working. They do the exact same thing to fix it (deleting some limit with regedit) and it works. I open iTunes, and I get the iTunes Warning (Setup Assistant Error).
    I asked the Dell tech what the deal was, and he said iTunes isn't compatible at all with Vista.
    But according to Mac's website it is...
    Anyone know what's going on?!?!

    I am having the exact same behavior as xhollysue!
    It goes like this:
    1. Install ITunes, lose optical disk drives hardware (they don't even show up in Windows Explorer).
    2. Use RegEdit to disable Upper Filters at HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}, optical drive hardware re-appears.
    3. iTunes requires a re-install to permit CD burning, and your back to square one.
    I got the above fix NOT from a Dell technician, but, instead, from a Microsoft technician, which cost me $70.
    I would strongly urge Apple to research this issue and come up with a more reasonable workaround since (1) the iPhone is being adopted by many traditional MS users and the use of iTunes is an integral part of the iPhone technology architecture; (2) iPhone 3G is just now shipping and will bring even more into the Apple camp; and (3) iTunes is clearly a better media player.
    Come on Apple. Let's get some enthusiam and take advantage of this opportunity!

  • After port forward, airport utility can no longer see my time capsule

    I tried to forward public port 1025 to private port 80 on a raspberry pi using  airport utility. But after I did that,  the airport utility can no longer see my time capsule. Wifi still works correctly. Are there any conflicts about port 1025? How to fix that other than resetting the time capsule?
    Thanks,
    Michael

    It doesn't sound like a port that is used.
    From the standard google search.. nope.
    Reboot the whole network..
    No luck tell me what OS version you are running the utility on and what model and firmware TC???
    Note with Yosemite, anything can and will happen.

  • Can No Longer See User Folder in Intrnl Drive after transferring to Ext Drv

    I'm trying very hard not to freak out right now, but I can no longer see my User Folder/Home in the Finder Bar after dragging and dropping it into the my newly formatted Seagate External Drive. I have OS 10.4.11 and am trying to install Snow Leopard, but before I do I wanted to back-up my hard drive. So I plugged in the Seagate, formated it for Macs, and then dragged and dropped he User Folder into the Seagate and now it is gone!
    Would greatly appreciate advice on how to find the User Folder so I can return it to the Internal Drive AND help on how to properly copy it to the Seagate External Drive as I have been unsuccessful.
    Many thanks!

    Not really. I previously tried that already. I added Chinese (Taiwan) and moved up pre-existing English as the phone language. Also set navigation voice in Here Drive+ to Chinese. Result:
    1. Street names still shows in English (it goes with phone language obviously), like "Da Xing Rd." However, some landmarks will show in both languages. 
    2. Navigation voice is in Chinese but all the street names are announced in English, so e.g. "Da Xing Rd." is announced as "Da-Sing-R-D". ("St." will be announced as "S-T"...) (This is the same as in WP8)
    Thank you. 

Maybe you are looking for

  • Credit Check with Third Party Process

    Hi Gurz, I know about third party process but my problem is with credit check of the customers. If customer has not got enough credit limit to process the order in normal senario credit controller has to manually release the order as system blocks it

  • Need help with using new ipod as hard drive. please!

    Hi. Has anyone had any problems using the ipod as a hard drive between two systems? I have an old 4th generation ipod which I used on my PC. That ipod worked great between macs and pcs as a hard drive. But recently it is completely screwed up. Anyway

  • Content of textfields is gone, when using LiveCycle Designer Version 8.2

    Hi there, I´m having a Problem with LiveCycle Designer in Version 8.2 (exactly 8.2.1.4029.1.523496). When It try to open a PDF-document containing an AcroForms-Form with some textfields, I can see all the textfields of the document, but their content

  • NCS Prime 2.1 LAN switch addition

    Hello, Im exploring adding the wired side of the network into prime(2.1).  I have added the range of switches and IOS below. Only some appear to be returning client IP addressing. Is the IOS im using out of date? Or NCS issue? thanks S Cisco 3750 Sta

  • UCCE 9.0 INSTALLATION ERROR

                       Hai , I was trying to installl UCCE 9.0.1 but it is giving me an error and I am getting crazy. The error is [Error] SQL Native Client: Microsoft SQL Server has been installed with an incorrect protocol order or incorrect protocols.