Include a component from a file?

Hi all, let's say I have this following very simple window
below (main.mxml):
Now, is there any way to create a, for example, calendar.mxml
that defines itself as a <mx:VBox> that can I source from the
main.mxml so the code doesn't have to be in the same page? Any
examples would be appreciated :).
Thanks!

If you define a file MyVBox.mxml in a sub-directory
components:

Similar Messages

Cannot load component from JAR file.

I got the message : cannot load component ... from JAR file. The class must be compiled and must be on the classpath of the project...
I just add a javabean from a JAR file from Palette manager, then drag and drop it, then got this message.
Can anyone tell me what i was wrong ? Thank you.

Hi,
You should paste your error log here to easy for other to help you.
For your scenario, it is a big chance you didn't include the jar file into your classpath, please check.
Thanks.

SJWS SP3 - Not including some jars from war file

I have a problem when deploying my application using the new Java Web Server SP3 that when my application is deployed my weblogic.jar and j2ee.jar are not included in the classpath that is created.
I have turned on finest detail logging and it does not say why these jar files are not being included in the path.
They are in the war files lib dir just like all the other jars(about 14 of them).
The only way I can get the app to run under SJWS is to add these other two files manualy to the classpath in the server.xml file.
This app runs fine under JRun 4.0 with no issues.
Why is this server dropping these jars and not even telling me it did it? What can I do to make it include these files in the proper classpath?
Thx

Here are the log entries.
finer: WebappLoader[/vc]: WEB3107: Deploy WAR /WEB-INF/lib/weblogic.jar to
C:\Sun\WebServer6.1\https-mis-lt-23974.corporate\webapps\XXXXXXX\WEB-INF\lib\weblogic.jar
finer: WebappLoader[/vc]: WEB3107: Deploy JAR /WEB-INF/lib/j2ee.jar to
C:\Sun\WebServer6.1\https-mis-lt-23974.corporate\webapps\XXXXXXX\WEB-INF\lib\j2ee.jarAs you can see it see's the two jar files from my WAR file.
But when I try and run the app, have a look at the CLASSPATH it created. The two jar's are missing. WHY??????????????
info: for host 127.0.0.1 trying to GET /vc/login/jsp/login_redirect.jsp, service
-j2ee reports: WEB2798: [] ServletContext.log(): WEB4077: Classpath from the ser
vlet context is:
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/NetComponents.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/aseclient.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/client.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/dbswing.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/dx.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/xxx-xxxxtags.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/xxx-xxxxxtags.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/internetbeans.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/jbcl.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/jcert.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/jnet.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/log4j.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/regexp.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/xerces.jar;
/C:/Sun/WebServer6.1/bin/https/jar/webserv-rt.jar;/C:/j2sdk1.4.2_04/lib/tools.jar;
/C:/Sun/WebServer6.1/bin/https/jar/webserv-ext.jar;
/C:/Sun/WebServer6.1/bin/https/jar/webserv-jstl.jar;
/C:/Sun/WebServer6.1/bin/https/jar/ktsearch.jar;
/C:/app/XXXXXXX/;
/C:/j2sdk1.4.2_04/jre/lib/ext/dnsns.jar;
/C:/j2sdk1.4.2_04/jre/lib/ext/ldapsec.jar;
/C:/j2sdk1.4.2_04/jre/lib/ext/localedata.jar;
/C:/j2sdk1.4.2_04/jre/lib/ext/sunjce_provider.jar

Including different datasets from a file?

I have (for the sake of argument) 2 illustrator files. One contains some vector drawings with multiple layers. I'd like to use two "versions" of that file so I'm using variables and datasets to toggle some layers and change some textfields. Now, in the other file, I'd like to link (place) to these two versions. When placing external files you can choose between several options, for example which artboard you'd like to include from a certain file, but I can't find an option for choosing which dataset (from the to be included file) I'd like to use?!? It seems to be using the one which was "active" while saving the file.
So, is it possible to include an illustrator file with a particular dataset and then the same file once more with a different dataset? And if so, how? It seems a bit redundant to duplicate the original file (with the 2 datasets) so it can be included in another one... for every change in a layer for example I would have to save the file twice? (Or more if I had more datasets)
Thanks,
Jersebas

It seems to be using the one which was "active" while saving the file.
Yupp. Data sets are only evaluated inside the document referencing them. Short of updating the file to be embedded with a script or building the variables in the main doc, I see no realistic way to handle this easily. This sounds more like a case for InDesign in the first place...
Mylenium

Why doesn't "include/object/text from file" work?

I want to include (link) text from other Word documents to a main Word document and I use "include/object/text from file" (Word function)
It works fine when I do so in "H:", but doing exactly the same in the Sharepoint environement result in "nothing" (nothing happens)
It DOES work if I link from a document saved in Sharepoint to a "H:" - document, but that is of no use since I need all the documents to be stored in Sharepoint.
Guess it has to do with the set up och Sharepoint.
Greatful for any tips!

Hi,
Did you mean insert a object in the documents?
Did you open the file with the local application or office web application?
In the office web application, it doesn’t have the function to insert a object in the browser.
I had tested with some word files in the library, open the word files with the local application, then insert file using the insert object function.
It worked without any issue.
What’s more, I had tested with Office 2010 and Office 2013, they all worked.
Did the issue occur in other libraries? You can create a new library to check whether it works.
You can also download a copy for the issued file, then open it in the local machine to check whether it works in the local machine.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Include text file and display from text file

Ok. I'm found the site with the monkey on the the flash thing and all it shows is a name, email and something else and I used it and it works by including a txt file and displaying text from that file as putting down this information
name.text = this.name;
and I can't find the site anymore to get help.
I want to know how to include a PHP script that shows this information like this
text=something I need&username=My Name&email=[email protected]
I want to show this stuff on the flash but every time I execute by using it as localhost/test.php, it will show a sentax error.
This is really stressing me out and I need a lot of help on this stuff.
Can someone help me?

ok. let me describe something else.
there's 3 text boxes that is dynamic text.
one of them is called name
the other one is called email
and last one is called location
in the text file, it shows this for importing to the flash file
name=My Name&email=EMAIL&location=My Location
When viewing the flash file that you created, it shows the name, it shows the email, and it shows location.
When I do it on my own even with a text file, it keeps on saying that there is an error on line 1.
I found a site that shows how to do it and it shows what to put in a text file, and it shows the action script. On the FLA file that he shows me has a monkey on the flash file and it has 3 text boxes that I described above. As well as the text file, it is the same. I used the example and it worked but I can't find the example again. I don't know what happened to the website and I don't know what happened to the download I had but it is not downloaded any more. I have adanced systemcare pro so it clears out my recent web searches and my recent downloads so I can't find it. I did a google search on anything about action scripts. I even did a monkey action script search and I couldn't find it.
It's making me mad and I don't know what to do. This is stressing me out way more than you think.
UPDATE:
I did a google search on a file I found in my www folder and I found it. finally.
Here's the site.
http://www.kirupa.com/developer/mx/externaldata.htm
now, I need to figure out how to load it from a PHP file.

Calling a component from a the main.mxml file

How do I call a component from a the main.mxml file?
<mx:Button id="btnNew" label="Launch Component " click="getComponent()" />
main.mxml (Has the button, that I would like to launch getcomponent.mxml)
getcomponent.mxml (The file I would like to call) (This file also has the ViewStack)
For some reasoning it's not seeing the bpVS(view stack id). I'm getting Access of undefined property bpVS error.

<mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:components="components.*"
width="100%"
height="100%"
minHeight="0"
backgroundAlpha="0">
<mx:Script>
<![CDATA[
   private function getComponent():void{
    bpVS.selectedIndex = 1;
]]>
</mx:Script>

<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
layout="absolute"
xmlns:view="components.view.*">
<mx:ViewStack id="bpVS"
top="69" left="180.5"
width="100%" height="100%"
resizeEffect="Resize"
moveEffect="Move" showEffect="Fade"
hideEffect="Fade">
</mx:ViewStack>
<mx:VBox id="vbTB" top="69" verticalGap="0">
<mx:ToggleButtonBar
    id="payTB"
    direction="vertical"
    dataProvider="{bpVS}"
    width="180" useHandCursor="true" buttonMode="true""
    resizeEffect="Resize"
    moveEffect="Move" showEffect="Fade" hideEffect="Fade" >
</mx:ToggleButtonBar>
    </mx:VBox>
Thank you

It won't see it just by creating the namespace that contains it. There has to actually be an instance of it in the application. So in your case, your main application file (lets call it MyApp.mxml) would look something like this:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
     xmlns:components="components.*">
     <components:Main id="main"/>
     <components:GetComponent id="getComp"/>
</mx:Application>
Then, you can reach down (mind you this isn't best practice) into those components to access their public properties. In a script block in MyApp.mxml, you could access the VBox with getComp.vbTB.
I don't know the ins and outs of your application, but perhaps Main is the main application, so then you would add GetComponent as a child of it instead of both Main and GetComponent being child components of the MyApp application. Does that clear up the confusion?

Getting component name from property file

Hi
I want to get names for components(say button or label) from property file. How I can achiev this.
second option is that getting names from database.
I want to know both the things
Can anybody help me in getting those names in both the ways. If anyone has sample code it will be really helpfull to me. :)
Raj

FileInputStream fin=null;
Properties property=new Properties();
try{
      fin=new FileInputStream("myfile.dat");
      property.load(fin);
      fin.close();
}catch(Exception e){}Infact this is the simpliest way to load property from file. You should check if File exists or readable with catch block. I used Exception but you dont. If you are using an Applet it will be a little different.

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

Error while generating java client code from wsdl file

I am trying to generate a java client code from WSDL file um_workflowSaveCreateProfile.wsdl which includes um_workflowSaveCreateProfile_interface.wsdl file, so I am keeping both the files in the same folder and trying to generate the client code but it is showing me the below error highlighted .
um_workflowSaveCreateProfile.wsdl
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xsd="E:/DIPPWF/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:oblix="http://www.oblix.com/" xmlns:obinterface="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile" targetNamespace="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile">
     <import namespace="D:/DIPP/WSDL/um_workflowSaveCreateProfile_interface" location="um_workflowSaveCreateProfile_interface.wsdl"/>
     <service name="OblixIDXML_um_workflowSaveCreateProfile_Service">
          <port name="OblixIDXML_um_workflowSaveCreateProfile_Port" binding="obinterface:OblixIDXML_um_workflowSaveCreateProfile_Binding">
               <soap:address location="http://localhost:7777/identity/oblix/apps/userservcenter/bin/userservcenter.cgi"/>
          </port>
     </service>
</definitions>
um_workflowSaveCreateProfile_interface.wsdl
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:oblix="http://www.oblix.com/" xmlns:oblixxmllocalschema="http://www.oblix.com/OblixXMLLocalSchema" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface" targetNamespace="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface">
     <types>
          <xsd:schema targetNamespace="http://www.oblix.com/" elementFormDefault="qualified"
               xmlns="http://www.oblix.com/"
               xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                    <xsd:include schemaLocation="../XMLSchema/common_parameters.xsd" />
                    <xsd:include schemaLocation="../XMLSchema/common_authentication.xsd" />
                    <xsd:include schemaLocation="../XMLSchema/workflowSaveCreateProfile.xsd" />
          </xsd:schema>
          <xsd:schema targetNamespace="http://www.oblix.com/OblixXMLLocalSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
               <xsd:element name="request">
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element name="params">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element ref="oblix:ObWorkflowName"/>
                                             <xsd:element ref="oblix:ObDomainName"/>
                                             <xsd:element ref="oblix:ObWfComment" minOccurs="0"/>
                                             <xsd:element ref="oblix:noOfFields"/>
                                             <xsd:element ref="oblix:AttributeParams"/>
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:sequence>
                         <xsd:attribute name="version" type="xsd:string" use="optional"/>
                         <xsd:attribute name="application" type="xsd:string" use="required" />
                         <xsd:attribute name="function" type="xsd:string" use="required" />
                         <xsd:attribute name="mode" type="xsd:string" use="optional"/>
                    </xsd:complexType>
               </xsd:element>
          </xsd:schema>
     </types>
     <message name="OblixIDXMLInput">
          <part name="authentication" element="oblix:authentication"/>
          <part name="request" element="oblixxmllocalschema:request"/>
     </message>
     <message name="OblixIDXMLOutput">
          <part name="body" element="oblix:Oblix"/>
     </message>
     <portType name="OblixIDXMLPortType">
          <operation name="OblixIDXML_um_workflowSaveCreateProfile">
               <input message="tns:OblixIDXMLInput"/>
               <output message="tns:OblixIDXMLOutput"/>
          </operation>
     </portType>
     <binding name="OblixIDXML_um_workflowSaveCreateProfile_Binding" type="tns:OblixIDXMLPortType">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          <operation name="OblixIDXML_um_workflowSaveCreateProfile">
               <soap:operation soapAction="http://www.oblix.com/"/>
               <input>
                    <soap:body use="literal"/>
               </input>
               <output>
                    <soap:body use="literal"/>
               </output>
          </operation>
     </binding>
</definitions>
I am using WSDL2 Java for generating the client code .
Please suggest where am I wrong .
E:\axis2-1.4\bin>WSDL2Java -uri E:\DIPPWF\um_workflowSaveCreateProfile.wsdl -p R
ND -d adb -s -o build\client--http-proxy-host 10.74.93.35 --http-proxy-port 80
Using AXIS2_HOME: E:\axis2-1.4
Using JAVA_HOME: C:\Program Files\Java\jdk1.6.0_02
Retrieving document at 'E:\DIPPWF\um_workflowSaveCreateProfile.wsdl'.
Retrieving document at 'um_workflowSaveCreateProfile_interface.wsdl', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_parameters.xsd', relative to 'f
ile:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_authentication.xsd', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/workflowSaveCreateProfile.xsd', relati
ve to 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'navbar.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/workfl
owSaveCreateProfile.xsd'.
Retrieving schema at 'searchform.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/wo
rkflowSaveCreateProfile.xsd'.
Retrieving schema at 'component_basic.xsd', relative to 'file:/E:/DIPPWF/XMLSche
ma/workflowSaveCreateProfile.xsd'.
Retrieving schema at 'displaytype.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/c
omponent_basic.xsd'.
Retrieving schema at 'error.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/compone
nt_basic.xsd'.
Retrieving schema at 'component_workflowTicket.xsd', relative to 'file:/E:/DIPPW
F/XMLSchema/workflowSaveCreateProfile.xsd'.
Retrieving document at 'E:\DIPPWF\um_workflowSaveCreateProfile.wsdl'.
Retrieving document at 'um_workflowSaveCreateProfile_interface.wsdl', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_parameters.xsd', relative to 'f
ile:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_authentication.xsd', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/workflowSaveCreateProfile.xsd', relati
ve to 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'navbar.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/workfl
owSaveCreateProfile.xsd'.
Retrieving schema at 'searchform.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/wo
rkflowSaveCreateProfile.xsd'.
Retrieving schema at 'component_basic.xsd', relative to 'file:/E:/DIPPWF/XMLSche
ma/workflowSaveCreateProfile.xsd'.
Retrieving schema at 'displaytype.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/c
omponent_basic.xsd'.
Retrieving schema at 'error.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/compone
nt_basic.xsd'.
Retrieving schema at 'component_workflowTicket.xsd', relative to 'file:/E:/DIPPW
F/XMLSchema/workflowSaveCreateProfile.xsd'.
*[ERROR] More than one part for message OblixIDXMLInput*
org.apache.axis2.description.WSDL11ToAxisServiceBuilder$WSDLProcessingException:
More than one part for message OblixIDXMLInput
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1162)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1085)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateBindi
ng(WSDL11ToAxisServiceBuilder.java:686)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
int(WSDL11ToAxisServiceBuilder.java:538)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
ints(WSDL11ToAxisServiceBuilder.java:489)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:363)
at org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder.populateA
llServices(WSDL11ToAllAxisServicesBuilder.java:107)
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:147)
at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)
at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)
Exception in thread "main" org.apache.axis2.wsdl.codegen.CodeGenerationException
: Error parsing WSDL
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:153)
at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)
at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)
Caused by: org.apache.axis2.AxisFault: More than one part for message OblixIDXML
Input
at org.apache.axis2.AxisFault.makeFault(AxisFault.java:430)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:397)
at org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder.populateA
llServices(WSDL11ToAllAxisServicesBuilder.java:107)
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:147)
... 2 more
Caused by: org.apache.axis2.description.WSDL11ToAxisServiceBuilder$WSDLProcessin
gException: More than one part for message OblixIDXMLInput
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1162)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1085)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateBindi
ng(WSDL11ToAxisServiceBuilder.java:686)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
int(WSDL11ToAxisServiceBuilder.java:538)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
ints(WSDL11ToAxisServiceBuilder.java:489)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:363).
Thanks in advance.
akshay

Hello,
Were you able to resolve this issue ?
I am seeing the same issue and at my wits end.
regards
Amit

Data loading from flat file to cube using bw3.5

Hi Experts,
                   Kindly give me the detailed steps with screens about Data loading from flat file to cube using bw3.5
       ...............Please

Hi ,
Procedure
You are in the Data Warehousing Workbench in the DataSource tree.
       1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
       2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
The DataSource maintenance screen appears.
       3.      Go to the General tab page.
                            a.      Enter descriptions for the DataSource (short, medium, long).
                            b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                            c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
       4.      Go to the Extraction tab page.
                            a.      Define the delta process for the DataSource.
                            b.      Specify whether you want the DataSource to support direct access to data.
                            c.      Real-time data acquisition is not supported for data transfer from files.
                            d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
Choose Properties if you want to display the general adapter properties.
                            e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                              f.      Depending on the adapter and the file to be loaded, make further settings.
■       For binary files:
Specify the character record settings for the data that you want to transfer.
■       Text-type files:
Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
Specify the character record settings for the data that you want to transfer.
For ASCII files:
If you are loading data from an ASCII file, the data is requested with a fixed data record length.
For CSV files:
If you are loading data from an Excel CSV file, specify the data separator and the escape character.
Specify the separator that your file uses to divide the fields in the Data Separator field.
If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                            g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                            h.      Make the settings for currency conversion, as required.
                              i.      Make any further settings that are dependent on your selection, as required.
       5.      Go to the Proposal tab page.
This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                            a.      Specify the number of data records that you want to load and choose Upload Sample Data.
The data is displayed in the upper area of the tab page in the format of your file.
The system displays the proposal for the field list in the lower area of the tab page.
                            b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
       6.      Go to the Fields tab page.
Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                            a.      To define a field, choose Insert Row and specify a field name.
                            b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                            c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                            d.      Change the data type of the field if required.
                            e.      Specify the key fields of the DataSource.
These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                              f.      Specify whether lowercase is supported.
                            g.      Specify whether the source provides the data in the internal or external format.
                            h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                              i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                              j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                            k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                              l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
       7.      Check, save and activate the DataSource.
       8.      Go to the Preview tab page.
If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
This function allows you to check whether the data formats and data are correct.
For More Info: http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

Importing data from Flat file

Hi all Experts,
I am a ABAPer and trying to learn BW by my own. I wanted to import data from flat file and generate some reports on that.
Can anybody tell me the steps starting from the infocubes(guess its the first step), to achieve it. Any help will be a great help for me.
Thanks in Advance,
Smita

1.to start with create infoareas, infoobjects(accoring to what u have in flat file).
2.then create a cube which will include these infoobj's and activate it.
3.create an application component and then create infosource,right click and assign ds to infosource and specify ur PC file source system(whatever system u've), 4.then u'll go to the infosource screen where u need to maintain the exact order of ur file in transfer structure tab, then maintain transfer rules, activate it.
5.create upate rules for ur cube by mentioning this infosource name.
6.create infopackages and schedule them. after data is loaded to cube, use tcode rrmx and logon to bex and find ur cube and then create queries on them.

Cannot create iView from PAR file

I am trying to create an iView from PAR file. But when I select the option,
"Portal component - create an iView from a portal component contained in a deployed portal archive (PAR) file"
and click next, I get the following error.
Error______________________________________
Step 1: Portal Archive Selection
No templates to display. You are not assigned to any existing templates.
I have portal_configurator and developer roles assignmed to myself. Which other role do I need? I cannot get admin role.
Note: Other users with admin roles can create iViews.

Hi
What is your portal version details ?
In EP 7.0 you do not have the option -- New From PAR.
So to create IView from Par, you should select the option New --> IView and then there will be an option to select par file.
Otherwise
1.Check if your par file is deployed on server.
2. Check the portalapp.xml, if you have configured your components properly.
Cheers
Chinmaya
reward for helpful answers

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

Animated gif's from unsaved file?

I used to be able to create animated gif's easily from unsaved files. I would simply select all the layers I wanted to use and process them.
After upgrading to CS6, I'm totally lost. I've followed half a dozen tutorials, but nothing works. The only way I can even load a frame into the Windows Timeline feature is to first save several images from my unsaved file, then reload them by choosing File > Scripts > Load Files into Stacks. But even then I can't find a Make Frames from Layers option when I click the down arrow on the right side of the palette.
Is there a simple way to create animated gif's from layers in an unsaved file on CS6, or do I need to reinstall my older Photoshop version in order to created animations?
Thanks.

Yes, I clicked Frame Animation Mode, but that's as far as I can get. It doesn't work the same as my older version of Photoshop. The only buttons that appear to function on the left side of the palette are "Split at playhead" and "Select a transition," and they actually don't do anything.
The tutorials tell me to click the down arrow on the right side of the palette and choose "Make Frames from Layers," but that choice isn't listed. The choices that are listed include "Loop Playback" and "Allow Frame Skipping."
I've tried several tutorials and have experimented with just about every button and arrow I can find, but I can't get any farther than the image you posted.

Include a component from a file?

Similar Messages

Maybe you are looking for