Include IBRELATION Assignment Block to an Overview Page Component
Dear experts,
I am trying to include the IBRELATION assignment block to an IBase Component PRDIOOV Overview Page in the WebUI. This is to allow us to see the Address of the IBase on the component level overview. We've been trying to include component IBRELATION into PRDIOOV but unsuccessful. Eventhough we've created the component usages and viewsets manually for IBRELATION Address in PRDIOOV (in transaction BSP_WD_CMPWB), and then include in the assignment block, we are still unable to view in the WebUI. Please help on this!
Thanks
Best Regards
Hi,
One of steps I can think of is have to redefine WD_USAGE_INITIALIZE method in impl class like
CASE iv_usage->usage_name.
WHEN 'Z_IBRELATION'.
CALL METHOD lv_usage->bind_context_node
EXPORTING
iv_controller_type = cl_bsp_wd_controller=>co_type_component
Hongyan
Similar Messages
-
How to make an assignment block in an overview page read only
Hi Experts,
We have the following requirement:
In Campaign overview page we need to make the Partner and Product assignment block read only.
Can this be achieved through coding or through configuration?
Please give detail steps for the appropriate approach.
Thanks in advance.
Regards,
SayanHi Leon,
Is there any authorization group which can be customized to take care of this situation?
For Product Assignment block in DO_PREPARE_OUTPUT method of class CL_CPGOE_AB_OVELPRODUCTS_IMPL (Component : CPGOE_ABLOCKS :: View : OVELProducts) it is checking some authority. Any pointers where those authorities are maintained will be helpful.
Creating a new configuration is not helping as the views are 'Table View'.
We are looking for an approach which will avoid coding or involve minimum coding.
Regards,
Sayan -
Adding new assignment block in the sales order component
Hi ,
In sales order , qty filed is available at line item general details level .now my requirment, the qty field has to display in the new assinment block. i am thinking to create new view and context node in the same component and ii will add this view to SOItemOV page . Please guide me this approach is correct or not.Dear Venky,
Refer to this [WIKI|http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock] for help.
Thanks
Vishal -
How to add "ATTACHMENTS" assignment block in standard component ERP_H
Dear All,
I have a requirement where i have to add the "Attachments" assignment block to standard component "ERP_H". I have taken following steps so far and i am able to display the view in the component ERP_H, however no funtionality has been defined.
I created a component usage of component "GS_CM" in the runtime repository of component ERP_H
and now i am able to display the assignment block in the overview page of component ERP_H
Now i have to create a custom controller and here is where the problem lies. When i try to create a custom controller, it asks for a BOL Entity, and in order to have the same BOL entity as in component GS_CM, i have to add Model "CM" to the runtime repository of component ERP_H, however i m not able to add Model CM in the runtime repository of component ERP_H unabling me to create the custom controller.
Any pointers would help, if there is any other way to create custom controller instead of adding bol component in the runtime repository.
Regards,
Pradeephi,
can you please add the solution , how u have done it? -
Help needed in defaulting Dynamic assignment blocks
Hi All,
We are trying to default assignment blocks based on the configuration saved against each object type.
Procedure followed is as below
Created 2 configurations, one for sold to party and the other one for ship to party in the BP_Head cpmponent for the Overview page. Two configurations of the overview page are saved against a role config key but with a variant of object type
Created two logical link IDs one each for sold to party and ship to party
Make these two logical link IDs available in the UI as direct link groups
Upon clicking sold to party the configuration saved against that(Set of assignment blocks in the overview page) needs to be called (Remember we saved this configuration with a variant of object type)
Similarly when clicking on the ship to party link corresponding configuration (Set of assignment blocks in the overview page) needs to be displayed
Any inputs on this will be of great help.
Regards,
udayayou need to redefine the method DO_CONFIG_DETERMINATION of your controller
there you get the role and any other needed values, and you define the OBJECT_TYPE and SUBTYPE that will be used as key fields for the configuration -
Hi,
I'm trying to create a new assignment block on an Overview page. Here are the steps that I followed:
1) BSP_WD_COMPOMENT->Navigate to component->Create view set->Create view(Table view type for a Value node with a Z table).
2) Runtime Repository->Added the view set Create above.
3)Runtime Repository->Add the View created into the viewset.
4)Runtime Repository->Add Viewset into the Overview page viewset.
Now, I was hoping to the see the above created view in the available assignment blocks list. But, I do not see it. Please guide me as to how will I be able to add the assignment block.
ThanksHello Sreesanth,
Please check out the following [thread|Creating an overview page with content; where I described the steps necessary to add new assignment block to the overview page.
I hope it helps.
Best Regards,
Yevgen -
Saved search DDLB button on an Assignment block toolbar
Hi,
We have a requirement to add a button on an Assignment block (in an overview page) similar to Saved search DDLB button/functionality present on the Header Area. Any ideas to achieve this. Please let me know.
Thank you
AnjiHello,
Refer below links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90789317-4b7d-2e10-8f88-ada75bb67369?QuickLink=index&…
Saved Search in Custom BSP Component | SCN
If you have not gone through it already.
Regards,
Ashik -
Adding assignment blocks notes and marketing att to the Quickcontact Page
Hi Gurus,
My requirement is to assign new assignement blocks to the QuickContactCreate view in component BP_CONT.
Right now when user want to create a Quick Contact create from Account Over view page, he could see a single view with general data. View name is BP_CONT/ContactQuickCreateEF
when you create a new contact(not a quick contact create) from master data, you could see notes and marketing assignment blocks along with general data.
My requirement is to assign/display the same notes and marketing assignment blocks in QucikContactCreate Over view page also.
Please tell how can i reuse/assign/display those two blocks in quick contact view
I tried to assign the above blocks through confiuration but i dont see them in the left assignment block list to assign.
can any one help me with steps how can i show those two assignment blocks on quickcontact create page and how can i use from contact over view page.
Thanks for all.
Seemanot received answer from any one, thats why am closing this thread
-
Creation of custom assignment block
Hi,
I am trying to create a custom Assignment Block in the BPHeadOverview page of component BP_HEAD.
I tried implementing it using EEWB ,by referring to the below SDN link.
http://wiki.sdn.sap.com/wiki/display/CRM/EEWB-AddingTableattribute
Following this link, I have completed till the part where it is suggested to run the report
CRM_BUPA_UI_EXTEND_REPOSITORY.
My problem is,the view which I created is coming in the Runtime Repository under the viewset for BPHeadOverview page
, but I am unable to find my view in the Component Structure Browser under the Views section.
As a result of which I am unable to configure my custom Assignment block.
Due to which I can't even find my AB with the other ABs coming under the BPHeadOverview page.
Kindly suggest a solution.
Thanks,
Litty.Hi littyj,
Move assignment block BP_EEW in the overview page of BP_HEAD from available to displayed. Give it a title. Save configuration setting and check in web ui.
Also please check in table BSPWDV_EHSET_ASG if the enhancement set your are using is default for the client you are working on or not.
I m quite sure this issue is because of the enhancement set.
Regards,
Varun -
How to view specific assignment block information for opportunity
Hi everyone,
We have the following requirement from our users:
1) Users will specify a selection criteria to view only specific opportunities on the opportunity search screen
2) Users will then select multiple opportunities from the result list
3) Users want the ability to choose the specific assignment block information they want to view(opportunity header, sales team, partners etc)
4) We should then display this in some form so that only specific AB information is available to the users
As I am compartively new to the SAP world, I would really appreciate if some one could guide me here. Currently a solution is in place where users can launch a report which opens a new excel sheet which has information for about 7 assignment blocks(this is static and users cannot choose which ones they want). We essentially need a solution which can interact with our CRM system and give the users the ability to choose which AB information they want to view and then output this information in a printable format.
I have been told that we can use Crystal reports to accomplish this but I am not very sure as these are primarily analytics tools? It would be great if anyone can provide some pointers.
Regards,
AbhinavHello Madhusudan,
In your overview page controller you have to overwrite methods: DETACH_STATIC_OVW_VIEWS (this is where you remove your assignment block from the page dynamically), REATTACH_STATIC_OVW_VIEWS (this is where you can put your assignment block back on the page). Both methods have a returning parameter where you can specify which assignment block you want to detach/reattach.
Hope this helps.
Best Regards,
Yevgen -
Supressing Drag&Drop for Assignment Blocks in Overview Page
Hi Experts,
in the standard setup it is possible to change the order of assignment blocks in a Web UI Overview page by means of drag and drop. Does anybody know how this feature can be suppressed if not desired?
Thanks,
JensHi,
one solution is to deactivate this in the customizing of the businessrole.
Add function profile PERSONALIZATION with value ALL_DISABLED to disable all personalization functionality.
There are some other values possible like:
WA_ENABLED or PP_ENABLED
Just test a little bit arround which is the correct one for your requirement. ALL_DISABLED deactivates all personalization.
Kind regards
Manfred -
Planned activities assignment block not sorted by most recent first
Hi,
I have implemented BADI CRM_BP_UIU_BT of enhancement spot CRM_UIU_BP_ENHANCEMENT in order to increase the number of results in the planned activities assignment block on the BP overview page to 250 as the standard is 100 and this works fine.
The problem is that the most recent transactions are not displayed first.
Can someone tell me how where i can implement som ecode to influence the initial selection of the data so it only looks up the most recent 250.
I don't believe this can be done in a sort on the BSP page, as only 250 records would have been selected. If the BP has 250 or under this works fine, but as soon as they have more than 250 the sort obviously doens't include the other planned activities.
If someone can suggest as way to do this I would really appreciate it.
Thanks
Matt.Matt,
Please review OSS Notes 1246331 and 1226594 found by doing search on FM in service.sap.com
CRM_BSP_OIC_1O_SEARCH_FROM_RF
In addition this old thread explains more information:
Re: Display 100 most recent entries in interaction history
Take care,
Stephen -
Can not update an assignment block with on_new_focus
Hello Experts,
I have the following problem. I created a new component which is similar to the component BP_BPBT to create activities for Business Agreements. In the overview page of the business agreement in WebUI, I have now the assigment blocks "Plannend activities" and "Interaction History".
When I create a new activity in the assigment block "planned activities" with the new button and save the activity with the buttons "SAVE" or "SAVE AND BACK". The new created actity is shown, depending on the "Active Status" , in one of the assignment blocks "Plannend activities" and "Interaction History". When I create an another activity in the same way, the new actiity is not shown in the assignment blocks. But when I reload the page again, I can see the new created activity.
During debugging, I see, that the first creating activity is in the collection in the method ON_NEW_FOCUS. When I create an another activity, the collection is not updated. Here is my coding:
* get collection of dependent nodes
TRY.
entity ?= focus_bo. "BuAg Entity
CATCH cx_sy_move_cast_error.
RETURN.
ENDTRY.
TRY.
lr_entity = entity->get_related_entity( iv_relation_name = 'BuAgBuPaRel' ).
lv_collection = lr_entity->get_related_entities(
iv_relation_name = 'BuilInteractionHistoryRel'
* D022159: Performance optimization
iv_mode = lv_mode ).
Can anyone explain me, why the activities (after the first one) are not in my collection.
Can anyone help me to fix this problem?
Kind Regards,
John H.Hi,
Please check if you have added your entity to collection after you save the entry. It looks like your value is saved in DB but its not reflected on UI because you are not refreshing your collection.
I would suggest that you write a code after you save and commit to refresh your collection of the context node.
Regards,
Bhushan -
How to remove the delete and edit toolbar buttons from the Overview page
Hi,
In the account/contact overview page, we see that the interaction history assignment block does not support the EDIT and DELETE options.
However, when we click on the hyperlink description of an activity in the interaction history, we get into the overview page of the activity. Here we can see the DELETE button and the EDIT button.
Is there a way to remove these two options from the overview page of an activity which is in COMPLETED status and in the interaction history section?
Please advice.
Thanks & Best Regards,
Ramesh.
PS: We use CRM 5.2 Web UI.You can hide the box that shows the snippets and the "Restore Previous Session" box with code in userContent.css
*http://kb.mozillazine.org/userContent.css
*http://kb.mozillazine.org/Editing_configuration
You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
*ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
<pre><nowiki>@-moz-document url(about:home){
/* hide snippet container on the about:home page */
#snippetContainer { display: none !important; }
/* hide sessionRestore container on the about:home page */
#sessionRestoreContainer { display: none !important; }
</nowiki></pre> -
Custom View not visible in Overview page as AB unless "Reset to Default"
Hi Experts,
I am facing a strange issue here.
I enhanced the component TPMOE and created a custom view ZTRADESPENDEXCEPTION in it.
Now i have added this view as assignment block in all 6 configuration available for the overview page.
I have redefined the DETACH_STATIC_OVW_VIEWS and REATTACH_STATIC_OVW_VIEWS.
The issue i am facing is that my view assignment block is not visible to the user unless he/she goes to the personalization of the overview page and hits "Reset to Default". Once this is done, later on users can change there personalizations and everything works fine.
Now i am not sure i can go and tell all end users to go to personalization of the TPMOE overview page and click on "Reset to Default".
Is there any other way i can show my view to the end users?
I have done this on the lines of overview page layout changing when you select product planning basis while creating Trade Promotions.
Thanks and Regards
Gaurav Kumar RaghavHi Amar,
My coding is given below.
In DETACH_STATIC_OVW_VIEWS, the coding is:
Call Super Method
ls_viewid-view_id = '<My View Name>'.
Append ls_viewid to rt_view_id
In REATTACH_STATIC_OVW_VIEWS, the coding is:
Call Super Method
if <flag> = 'X'.
ls_viewid-view_id = '<My View Name>'.
Append ls_viewid to rt_return.
endif.
In debug mode, the coding get executed correctly and my view is returned for attachement.
For each user, the first time, i need to say "Reset to Default".
After that it works fine, my view is displayed.
Is the program "BSP_DLC_DELETE_PERSONALIZATION" a good solution to my problem?
Thanks and Regards
Gaurav Kumar Raghav
Maybe you are looking for
-
ICloud for a family account does not work
We could not use iCloud for our family for multiple computers and devices with one [email protected] The details.. These are our devices - Two iPhone 4's (me and my wife) One iPhone 3G (my daughter) MacBook Pro MacPro Mac Mini iPad2 We want to use on
-
How to change access path for 'where' clause by using HINTS?
I searched a loooot of posts and haven't found a solution for my case. I don't even know whether it is possible or not. Is it possible to change the sequence of Oracle "Predicate Information"? Here is my SQL and Oracle's execution plan. SELECT Max(
-
My macbook doesnt work ---- blue screen
i cant get in my macbook air because ther us a blue screen ! please help me!!!
-
I am using the book JAVA for Dummies and am at the logical operators section. I cannot find on my keyboard the symbols of the vertical bars for the 'or' logical operator. How do you create or get the bars from your keuboard for that?
-
When entering the prod order in CO15 screen the systems displays this eror. "Wage type PP10 is not valid for personnal number or plant (but in master data i didn't create any routing, i dont know why the system displays the error like this ) Pls give