Include statement

does include need to be the first statement or it can be anywhere in the code . I have kept a break-point first and then an include statement. Will that work?

sorry guys i was wrong earlier. i have just checked it out. it can be anywhere in the program.
regards,
srinivas
*reward for useful answers*
Message was edited by:
XI_Novice

Similar Messages

How to use the Include Statement in the BADI

Dear All,
I am trying to implement the BADI. So i need to use the Include in the BADI.
How to use the Include statement in the BADI. I cant able to use it in the Public, Private and protected statement.
Where should i mention that,,,,
Thanks
Yogesh

Hi Sharat,
Thanks for your reply.
I need to use the BADI HRWPC_PCR_APPR_FORM. In which the values are available in the Container. So if i need to use the container values then i need to use that include <cntain>.
Is there any possible ways to make it.
Thanks
Yogesh

Use XSD referencing other XSDs with include statement in Message mapping

Hello,
I have an XSD with include statements having reference to other 4 XSDs.One XSD out of these 4,one references one more XSD
I referred to the thread on this :
refrencing 1 xsd to another https://forums.sdn.sap.com/post!default.jspa?forumID=44#
I have created 6 External Definitions one for each XSD
Referring to the following statement in this thread:
In XI 3.0, there is a tab there called External References. You will see there a Source and a Name. When you click the Name, click Copy Object. Then you open the target object and paste it under the Source located just before the tabs.
The Name you see in the External References are the ones that are declared as include or import in the XSD.
I can see included XSD names in Source column under External References tab in External definition for main XSD.
But Name column is always blank and these columns are not editable.Also,copy doesn't work.
We have XSD names in include statements,but I wonder when I create External definitions out of these XSDs ,how would my main External definition know,which other External definitions are referenced?
If I use the External definition with main XSD as target structure in my mapping,I can only see the fields from this XSD and not the fields from the included XSDs.But I need to map these fields as well.
Can anybody please let me know how can I get a complete XSD as target structure in my mapping?
Thanks for your help.
Regards,
Shweta

Plz close other duplicate threads for the same issue first..
Regards,
Sarvesh

Using a var within an Include statement

What syntax do I use in order to put a variable within an Include statement...
<%@ include file="<%= varhere %>.htm" %>
Thanks for any help!

use
<include>
<param name=" something " value="34"/>
</include>

Autotype support for xsd import and xsd include statement

Hi,
I am using Weblogic 7.0.1. While using autotype for a Schema, I get the error unable to resolve element ref: "qb:WireCenterCLLI. This element exists in an xsd imported in the main XSD which in turn includes a few XSD's. I saw few posts which indicated there were issues with autotype recognising xsd:import and xsd:include statements. Were these issues fixed? If so, what SP were they fixed in?
My XSD:
<?xml version = "1.0" encoding = "UTF-8"?>
<xsd:schema xmlns = "http://www.qwest.com/XMLSchema"
targetNamespace = "http://www.qwest.com/XMLSchema"
xmlns:qb = "http://www.qwest.com/XMLSchema/BIM"
xmlns:xsd = "http://www.w3.org/2001/XMLSchema"
elementFormDefault = "qualified">
<xsd:import namespace = "http://www.qwest.com/XMLSchema/BIM" schemaLocation = "/u/skarani/sia_code/xsd/ProjectSpecific/SIA/BIM/AddressValidationInclude_v01_00.xsd"/>
<xsd:include schemaLocation = "/u/skarani/sia_code/xsd/ProjectSpecific/SIA/Common/AddressValidationCommon_v01_00.xsd"/>
<xsd:include schemaLocation = "/u/skarani/sia_code/xsd/ProjectSpecific/SIA/Common/RequestMessage_v02_01.xsd"/>
<xsd:element name = "AddressValidationByServiceIdRequest">
<xsd:complexType>
<xsd:complexContent>
<xsd:extension base = "WebServiceRequestT">
<xsd:sequence>
<xsd:element name = "InputData" type = "AddressValidationByServiceIdInputDataT">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
</xsd:element>
<xsd:complexType name = "AddressValidationByServiceIdInputDataT">
<xsd:sequence>
<xsd:element ref = "qb:WireCenterCLLI" minOccurs = "0"/>
<xsd:element ref = "qb:WireCenterPrimaryNPANXX" minOccurs = "0"/>
<xsd:element ref = "AdministrativeArea" minOccurs = "0"/>
<xsd:element ref = "qb:PostalCode" minOccurs = "0"/>
<xsd:element ref = "qb:BTN"/>
<xsd:element name = "ParsedAddressFlag" type = "xsd:boolean" minOccurs = "0">
</xsd:element>
<xsd:element ref = "qb:CCNA" minOccurs = "0"/>
<xsd:element name = "CompanyCode" type = "xsd:string" minOccurs = "0">
</xsd:element>
<xsd:element ref = "AssignedHouseNumberFlag" minOccurs = "0"/>
<xsd:element ref = "GSGRqmtFlag" minOccurs = "0"/>
<xsd:element ref = "TNStatus" minOccurs = "0"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Thanks
Shekhar

Hmmmm.... No answers!!!
Has anyone had success using autotype with an xsd having include and import statements???
Thanks
Shekhar

Disable include statements to access control

Hi,
include statements (@include, not include actions) can include any
resource and are not subject to declarative or programmatic access
control. So access control works for the including JSP but not for the
included resource.
Is there a way to restrict include statements (@include, not include
actions) to mitigate this risk?
Tag library validators don't work because they just get a byte stream
of the XML view of the JSP with expanded include statements.
Security manager policies are difficult because the servlet container
needs access to all resources and FilePermissions paths are not
expressive enough. Something like
grant the jsp engine {
permission java.io.FilePermission "/some-root/-.jsp" "read";
permission java.io.FilePermission "/some-root/-.jspx" "read";
seems not possible.
Do you have any idea how to restruct include statements?
Thanks
Hannes

Hi Private_frazer,
Welcome to the forum, that does sound a bit frustrating. I can get this look into for you. Please could you send me in your details using the link found in the "About Me" section of my profile.
Thanks
Paddy,
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Include statements needed in .c i.e. #include "nivivision.h"

Hi,
I am a new bibe to Labwindows/CVI and Ni Vision.
I am struck with the issue ,Kindly help me in resolving.
I have installed LabWindows/CVI demo version and Vision Acquisition Software on my system.
With the Vision Acquisition Software installation i have got files which is required for my project.
I have a LabWindows/CVI project (FindTabDLL.prj) which have
Under source files
FindTab.c
Under Include Files
FindTab.h
Under Instrumentation Files
cvixml.fp
inifile.fp
toolbox.fp
I have included Include path for the project by right clicking on project->Edit Project->Click on Include Path->Added include path for NIVision.h and NIImaqdx.h
The Actual problem comes here,
When i build the project i have the following error popping up,
"The following include statements are needed in FindTab.c #include "nivision.h" Do you want to add them to the top of the file Yes NO Cancel"
What might be the problem,i have included the #include headers also ,even then building the project gives me same error.
I am attaching the .doc which shows errors i am facing.
Thanks in advance,
vinayasheela
Attachments:
FindTab_LabWindows.doc ‏229 KB

Hi,
Thank you for the quick reply.
Yes,I tried that before writing to the forum.
FindTab.h has #include "nivision.h"
FindTab.c includes "FindTab.h" i.e. it indirectly adds # include "nivision.h"
even then it pops up with the error dialog.
Have a look at the attached errors.
Thanks and Regards,
vinayasheela
Attachments:
FindTab_LabWindows.doc ‏229 KB

A link (underline) for #include statements without pressing ctrl

Hello,
I have SunStudio version 12. (the version which was released a few days ago,
at the beginning of June 2007).
I created a "C" project with it.
When I press the "ctrl" button and then hover with the mouse over a name
of include file, which is part of my project, a link (underline) appears under
the header file.
left clicking on that link with the mouse opens this header file in the editor.
All is good this far. Now, is there a way to configure SunStuduio so
that the link (underline) will appear under the header file without that
I will have to press the "Ctrl" button (but it will be done automatically
for all #include statements in my project)?
Regards,
Mark

No, this isn't possible.
If you don't like to use both mouse and keyboard simultaneously, you can right-click and select go -> include

How to use include statements

I'm trying to learn to code .jsp pages (learning from the book "Professional JSP"). I'm trying out methods of including other pages, both .jsp and .htm pages. I was able to get it to work with the statement
<%@ include file="filename.jsp" %>
But, I tried putting in a full address pathname, for example http://myserver.example.com/dir1/filename.jsp, and it would not work that way. I get the message "Forbidden (403) You have requested data that the server has decided not to provide to you. Your request was understood and denied.". What am I doing wrong? I ultimately need to be able to include a page from a different server.
I also tried this:
<html>
<head>
 <title>hello.jsp</title>
</head>
<body>
hello from hello.jsp 
The current day and time is - <%=new java.util.Date()%> 
<jsp.include page="hello2.jsp" />
goodbye from hello.jsp 
</body>
</html>
Where hello2.jsp looks like this:
<html>
<head>
 <title>hello2.htm</title>
</head>
<body>
hello from hello2.jsp 
<script type="text/javascript">
alert("hello from hello2.htm");
</script>
</body>
</html>
But it seems to just ignore the include because all I get is this:
hello from hello.jsp
The current day and time is - Fri Sep 12 09:20:12 EST 2003
goodbye from hello.jsp
Any help would be greatly appreciated!

Thanks for your patience. Actually, I did pay attention to the first part and I'm trying to just include another .jsp file in the same directory. If I have it like this:
<html>
<head>
 <title>hello.jsp</title>
</head>
<body>
hello from hello.jsp 
The current day and time is - <%=new java.util.Date()%> 
<%@ include file="./hello2.jsp" %>
<%-- <jsp:include page="./hello2.jsp" /> --%>
goodbye from hello.jsp 
</body>
</html>
Contents of hello2.jsp:
hello from hello2.jsp 
Final output:
hello from hello.jsp
The current day and time is - Fri Sep 12 14:44:46 EST 2003
hello from hello2.jsp
goodbye from hello.jsp
But, if I uncomment the "jsp:include" part and comment out the "@ include" part of hello.jsp like this:
<html>
<head>
 <title>hello.jsp</title>
</head>
<body>
hello from hello.jsp 
The current day and time is - <%=new java.util.Date()%> 
<%-- <%@ include file="./hello2.jsp" %> --%>
<jsp:include page="./hello2.jsp" />
goodbye from hello.jsp 
</body>
</html>
Then I get the "Forbidden (403)" message.

Difference Betwen #include statement and Import statement

What is the Difference between #include and Import statements!

Why do you need to shout! Are you unware that English has a question mark that is used at the end of a question sentence! Java doesn't have #include! It only has import!
Import in Java simply tells the compiler that when you say, for example, List, you mean, for example, java.util.List! It does not affect the generated class file in anyway!
#include in C/C++ causes the body of the reference file to be inserted into the compilation stream! So, unlike Java's import, that file actually gets compiled into the final output!

INCLUDE - Statement is not accessible. URGENT.

II am making change to user exit in INCLUDE MV45AFZZ.
I just put an if condition in the INCLUDE ztest_so.
It is giving following ERROR (RED) when I check the syntax.
Include ZTEST_SO
Statement is not accessible.
FORM userexit_move_field_to_vbak.
Include ztest_so
Endform.
*& Include ZTEST_SO
if sy-uname eq 'TRAIN014'
endif.
Please help.

You created the include alright. But there is no call to the include (Perform statement) from any program, hence include cannot be accessed.
MV45AFZZ is standard SAP User Exit where all Forms are being called at specified points in standard SAP code.
Iam not sure/not tried but if you create your new Form you will have to modify SAP code to make a call to this FORM, which is not recommended.
The best solution is to use the available Forms and put your code in the one that is being called at the right place for you to be able to use it.

Include statement in SAP Scripts

HI
1)Could you send syntax of logo in header window of layout.
2)We have 2 printers, while i give the print request Purchase order, one printer is working and coming logo along with details of the form, but other printer is working, then logo is not coming in header.Please give me details as early as possible.
Thank you
srini

Hi,
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID 'ST' LANGUAGE 'E'
These are the steps to be followed for uploading graphics in R/3 system
1. First save the file as BMP
2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
make it Zoom as 100% and save as *.TIFF
3. Open SE38 and execute program RSTXLDMC
4. Give your TIFF file path name
5. Select Bcol (for Color)
6. TEXT ID will be ZHEX-MACRO-*.
7. Inplace of * write your own logo name (ZCOMPANYLOGO)
8. Execute the program
9. Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
Thanks,
NN.

Including code in a include statement

How come this piece of code isn't valid? <jsp:include page="<%=request.getContextPath() %>/include/subnav.jsp" /> And what are the alternatives? I want the include path to be generated based on the contextPath variable.

jsp:include works with RequestDispatcher (internally), it doesn't require 'context path'.
solution:
<jsp:include page="/include/subnav.jsp" />

Include statement called by Standard text - Smartform issue

Hi all
I'm in a project to migrate Sap Script to Smartform and I'm facing a issue with Include texts. Some texts are actually a command that calls another text - using /: Include statemente.
I debugged the Include text on Smartforms and I found the part of the code that simply delete any command /: (and a few other formats)
so I really don't know if someone already found a way to make this work.
Thanks for all help
Andréa

Hello Andrea,
As per i know in Smartform we have to use INCLUDE TEXT for the text node . In that you can include your text object - Z_SD_AB_CLOSING. Kindly check the below screen :
In text object put - Z_SD_AB_CLOSING.
Language - EN
Please try and let me know if this is not your requirement.
Stay Awesome,
Romit Raina

How to consume 3rd Party WSDL which contains the Include statement

I have a 3rd Party WSDL I am trying to consume using the BizTalk WCF Consume Wizard.
When I try and consume the WSDL it gives me blank XSDs and Binding files. It does produce the Port Types in an Orchestration.
This
article mentions how to use the svcutil tool to get around the use of Import statements but does not give the full command. I have tried svcutil /t:metadata <Path of WSDL> but get an error stating can't load file or assembly.
Any ideas anyone?

Hi，
Please refer to the blog which might helpfull:
#The BizTalk WCF Service Consuming Wizard and a Look at the Artefacts Created
http://jamescorbould.wordpress.com/2013/09/27/biztalk-and-wcf-consuming-a-wcf-service-part-2-the-biztalk-wcf-service-consuming-wizard-and-a-look-at-the-artefacts-created/

Include statement

Similar Messages

Maybe you are looking for