Incoming Email Settings for the libraries in My Sites and Personal Sites

Hello Friends,
I'm currently working on SharePoint 2013 implementation where My Sites have been configured in a separate web application and personal sites are being stored under same web application.
Ex: My Site Host : http://mysite.abc.com
All Personal sites: http://mysite.abc.com/Personal/firstname_lastname
These are the challenges I'm facing...
1. I enabled Incoming Emails for one of the document library in My Site host but not receiving emails. (All settings are properly configured, document libraries in other sites (team sites) are getting emails.). I doubt the problem is only with my site template.
2. Incoming Email Settings are not appearing in "one Drive" document library in my personal site( which is "Documents" library in personal site). So I added Email event as stated here and here
and settings are started appearing, but I can enter only email address as other settings are not appearing. Here also I'm facing the same problem.
Kindly share ideas if any.
Thanks!!
Manjunath
-Manjunath

Hi,
It is encourage that you to use another library in another site template:
http://davecoleman146.com/2010/10/27/how-to-setup-mail-enabled-document-libraries-in-sharepoint-2010-part-4/
http://sharepointgeorge.com/2010/configuring-incoming-email-sharepoint-2010/
Please be notice: The e-mail drop folder setting is not available in automatic mode, because that mode automatically sets the e-mail drop folder to the folder that is specified by the SMTP service. (https://technet.microsoft.com/en-us/library/cc263260.aspx#section3)
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly

i have an issue when loading a workflow. it gives me a following error "The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly". it doesnt send me any alerts and worlflow fails at the end
with the above error message.

Hi,
I agree with Bistesh. But after Outgoing e-mail settings are configured properly, if the issue still exists,
It may result from your Anti-Virus. Please refer to the following steps:
Open MCAfee Console and go to Access Protection window.
Click Anti-Virus Standard Protection and edit “prevent mass mailing
worms from sending emails” rule.
Now we need to know which processes are being blocked therefore we need to check the MCAfee Log located at
C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection\AccessProtectionLog.txt
you may find entries of DtExec , DtExecUI and DatabaseMail90, now these processes need to be entered in the exclusion list of selected rule .
Reset the IIS And SharePoint Timer service to check if this works for you.
Here are some similar issues with you, you can use as a reference:
http://social.technet.microsoft.com/Forums/en-US/667f0d61-4914-43fa-80c1-8cf430b113bb/workflow-email-not-working-but-normal-email-alerts-working-fine?forum=sharepointgeneralprevious
http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
Best Regards,
Lisa chen

HT3228 What's the correct email settings for the fastest email receiving on my iPhone 4s

What's the correct email settings for the fastest email receiving on my iPhone 4s

As no one here knows who your email provider is, no, no one can help. Have you tried looking at your email provider's help pages? Done an internet search?

Settings for the relation of requirement type and planned order type

Dear Gurus
Where we maintain the settings for the relation of requirement type and planned order type?Actually I have maintained strategy 60 for a particular material (planning material) so the requirement type is vsev and along with that the planned order type is coming is vp i.e non convertible planned order.That is ok the system is behaving right.But nowhere I can find the setting of vp with vsev how the system is picking vp?
Regards
Sandip Sarkar

Hi!,
That is an inbuilt sytem setting and you can't change that.
Regards,
Uday

Incoming email settings for a dropoff library & content organizer rules in SharePoint 2013

I have configured an incoming email setting for a drop off library,I need to save original email also.Following are the issues:
1)Two attachments are getting uploaded for an email , Email(.eml file) as well as the attached file .I just want to save the email part as it is already containing the attachment
2)In Mozilla i can see the popup for for opening the .eml file while in IE it is directly opening in browser ,is it possible to show popup in IE?
3)I want to write content organizer rules depending upon the email subject,but i m not able to find that column

1)Two attachments are getting uploaded for an email , Email as well as the attachment.I just want to save the email part as it is already containing attachment
Inder: When you set the incoming email, you get option to save only email and not attachment. check the incoming email settings on that library.
2)In Mozilla I can see the following popup when i click on the email,I want to have this functionality on internet explorer.
Inder : You can do that
http://office.microsoft.com/en-in/sharepoint-server-help/change-how-to-open-a-document-in-a-library-with-one-click-HA101729873.aspx
Also enable below feature
lick the gear icon to open Settings, and then click Site settings.
Click Site collection features.
Note If the Site collection features option isn't present, you must first click
Go to top level site settings.
Locate the Open Documents in Client Applications by Default feature in the list, and then click
Activate.
3)I want to write content organizer rules depending upon the email subject,but i m not able to find that column
I assume, Email subject should by default become title of that document. Try title
If this helped you resolve your issue, please mark it Answered

Has Verizon changed email settings for the iPhone?

Hi-
have an iPhone with iOS6 installed. Haven't changed a thing for quite a while, but it stopped receiving Verizon/Yahoo emails yesterday (using the built-in Mail app). Did Verizon change something on the email settings? My emails are coming into my home computer so my password is correct and active.
thanks

I've been wracking my brain over this for a few days and I finally found the solution. Before it was enough to just use your username to access your email account, but since Yahoo's outage you apparently need to add "@verizon.net" to the end of your username for it to work. I was going crazy because I quadruple checked my port and SSL settings on my phone like all the other forum posts suggest. All my settings lined up with what they should ave been but still wouldn't work. On a whim, a final desperate try before I deleted the account from my phone, I added the "@verizon.net" after my username, and the !#@%# thing worked! Give it a try. It certainly won't make it work any LESS.

Incoming email settings on library

Hi!
I have a SharePoint 2013 foundation environment. on this environment i have enabled the incoming email settings and succesfully tested this on a library on the root of my site collection.
When i create a subsite and add a new Document library, i wish to also enable incoming email settings on this library.
the only problem is that, when i go the the incoming email settings from the library, i only have 2 options:
Enable incoming email settings
provide the emailaddress
Where are the other settings gone to ? i really need these settings.
Kind regards.

Hi,
According to your description, my understanding is that only two options appeared in the Incoming E-mail settings of a library after applying an event receiver to the library.
Did this issue occur with all the libraries?
I recommend to verify the things below for troubleshooting:
Create a new library and apply the event receiver to it to see if the issue still occurs.
Apply the event receiver to an existing library without issue in the Incoming E-mail settings to narrow the issue scope.
You can also set the Incoming E-mail Settings using PowerShell:
http://thesharepointfarm.com/2013/07/using-powershell-to-manage-sharepoint-email-settings/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Unable to set up incoming email settings in Discussion Board

I was not able to set up the incoming email settings in my test discussion board list.
even though my Exchange Server team has done the setup the Exchange related things in my SP 2013 server, I was not able to see any emails flowing into discussion board.
Due to soem reason, Emails not sending to discussion boards.
Am i missing any steps?
I have attched the below screen shot, which shows what i have done in the list settings:
Is anyone has faced this issue before?

Hi ,
According to your description, my understanding is that the discussion board cannot receive emails after you set up the incoming email settings in the discussion board list.
Could you find the email in the drop folder?
If not , please make sure you have configured the incoming email settings correctly:
http://blogs.technet.com/b/harmeetw/archive/2012/12/29/sharepoint-2013-configure-incoming-emails-with-exchange-server-2013.aspx
http://daniecsp.blogspot.com/2013/02/sp20132010-how-to-configure-incoming.html
If you can, what is the x-sender’s address in the email which is captured into the drop folder ?
You can refer to the thread:
http://social.technet.microsoft.com/Forums/en-US/152203d4-45ff-4388-9dda-03e4786f63fe/email-enabled-document-library-doesnt-work-when-accept-email-messages-based-on-document-library?forum=sharepointadminprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support

Incoming Email settings is not visible for SharePoint SkyDrive.

Incoming Email settings is not visible for SharePoint SkyDrive. Is this the expected behaviour or is there any workaround to resolve this?

Hi,
I have tested the issue in my environment, there is no incoming email setting in my OneDrive library setting. It seems like it is by design.
Thanks for the understanding.
Regards,
Rebecca Tu
TechNet Community Support

TS3899 "cannot get mail" in iphone5 suddenly. been using iphone to check 2 email accounts for months now, one is gmail and not troubled. the other is thunderbird and i get this error message now. no settings have been changed or anything! ideas?

hey all, I have been getting the "cannot get mail" error message on my iphone5 suddenly.
ive been using iphone to check two email accounts for months now, one is gmail and not troubled. the other is mail from thunderbird and i get this error message now saying it is not responding. no settings have been changed or anything, it just suddenly stopped receiving mail on my device as of Tuesday afternoon.
Does anyone have iny ideas about why? i have yet to update to the new OS7 yet, could that be it?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

What are the email settings for mac mail

what are the email settings for mac mail

If you mean iCloud email, you can automatically configure this on your Mac runnint Mountain Lion by going to System Preferences>iCloud, signing into your iCloud account and checking Mail. To manually configure it, use these settings: http://support.apple.com/kb/HT4864.

Issue in incoming email settings in discussion forum

hi,
I have enbaled incoming email settings in my discussion forum list.
i have sent a email with a subject, sent to the targeted-emailid to the discussion forum and its sent successfully.
But the users whom i want to share this discussion thread were not able to receive the email in return when someone posted a reply on this forum.
Pls let me know how to resolve this if its possible OOB. any settings / config changes i need to make it on the exchaneg server or SP Central Admin ?
also how to attach a file / [ attachments ] as a reply to this discussion forum thread.

If users want alerts email for some users, you need to set alerts or ask someone to set alerts
You can set alerts in behalf of other users as the administrator for list and inidividual items. Just set up an alert like you are setting it up for yourself...Use the drop-down menu to select "Alert Me", delete your name and enter in someone else's. If
the username textbox is greyed out, you don't have the proper permissions. I think you need to have the "Manage Permission" rights of the site which is included in the Manage Hierachy and Full Control permission levels.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0dba8b5f-11ec-4717-96df-8bb317db43ff/discussion-board-alert-me-need-only-about-new-threadsnot-messages
you can also try IAlertNotificationHandler interface to customize alert. If you don’t want to write code, you may consider using 3<sup>rd</sup> party tool about SharePoint
alert which you can find on the internet.
For more information, please refer to:
http://support.microsoft.com/kb/948321/en-us
http://blogs.msdn.com/sharepointdeveloperdocs/archive/2007/12/14/how-to-customizing-alert-emails-using-ialertnotificationhandler.aspx
If this helped you resolve your issue, please mark it Answered

Incoming email setting for Calendar not working

Hello -
I want to be able to send a meeting request from Outlook and have it show up on my SharePoint calendar.
I followed the steps in this link to configure email for a 2013 farm:
https://technet.microsoft.com/en-us/library/cc262947.aspx
Basically I installed the SMTP server on my SP web server and configured the relay to accept all.     In Central admin, I enabled incoming email using Automatic mode. and set it to accept mail from all e-mail servers.
My SharePoint site is http://sharepointdev.   SharePoint server is SPDEV1.     Maybe I am not setting my email server display address correctly? I have that set up as <mylist>@sharepointdev1.com   (I don't
think it matters what you call it here).
I have also verified that under the Calendar list setting, under Communications > Incoming email settings, it is allowed to accept incoming email. The email to use is <[email protected]
When I send the meeting invite, I get an outlook undeliverable on the above email. Details are:
Remote Server returned '550 5.7.0 Proxy session setup failed on Frontend with '554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain''
I must be missing a step somewhere.   Any other suggestions?   I've tried everything in the links below. thanks
https://support.office.com/en-in/article/Enable-and-configure-e-mail-support-for-a-list-or-library-dcaf44a0-1d9b-451a-84c7-6c52e7db908e
https://social.technet.microsoft.com/Forums/en-US/8d767ef4-ba8f-47a4-9fa9-bb0115092079/can-i-configure-incoming-email-to-a-calendar-in-sharepoint-online-2013?forum=sharepointgeneral

Hi XRS,
Based on the error message, the email could not be routed correctly.
What environment did you send email to SharePoint list? Is it an internal environment or external external environment?
If it is internal environment, you need to make sure the domain is same with email address’s domain, and SharePoint server can parse the domain.
If it is external environment, the email address’s domain need to be a public domain, SharePoint server must have public IP and the domain for SharePoint server must have correct MX record to ensure email can be routed correctly
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Programmatically set email address column in incoming email settings in discussion fourm

hi,
I have to set up incoming email settings in my discussion forum in my subsite.
but the issue is that i am creating hundreds of sub sites based on a savedsite template.
can anyone help, how to set the incoming email settings' email address columns programmatically, ie, when the sub site is getting created i wanna set this property of my discussion forum list[ my discussion forum is also part of the saved site template].

Use Event Handler when a new site is created and set incoming email. Refer to the following post for more information
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spwebeventreceiver.webadding(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spwebeventreceiver.webprovisioned(v=office.14).aspx
http://www.novolocus.com/2009/04/15/programmatically-create-and-configure-mail-enabled-lists/
--Cheers

Telus email settings for phone with T-Mobile SIM

Hello,
I have a Q10 that is normally on the Telus network. Spending time in TX I've unlocked the Q10 and installed a T-Mobile SIM. Great. Got a TX phone number and BBM and web browsing work perfectly.
But. Although my Telus email accounts make all incoming email available on the handheld, I cannot send email through the Telus accounts.
For reference the accounts are setup as:
(These are the default settings inserted automatically when I setup the Q10.)
Username: [email protected]
Email Addresss: [email protected]
Server Address: imap.telus.net
Port: 143
Encription: Off
IMAP Path Prefix: [blank]
SMTP Username: [blank]
SMTP Server Addresss: smtp.telus.net
SMTP Port: 587
In searching for a solution I found this (outdated?) KB article KB33691 which notes at the bottom that the settings only allow outgoing mail when connected to a Telus network.
What settings do I use to allow incoming and outgoing Telus email when connected to a non-Telus network?
Solved!
Go to Solution.

Hello FYIP.
Okay, I thought there must be some sort of magic or secret setting. I called Telus as you suggested and within 10 minutes the tech support guy solved the problem. He looked on some list and confirmed that the standard settings should work fine for T-Mobile. He then advised me to delete the affected Telus email accounts on the Q10 and recreate them again. All defaults were accepted. Exception was fields where a password was required and auto-populated he told me to erase and retype the password.
Voila! All is good. Outgoing and incoming mail work just fine.
Way to go Telus. Count me as another satisfied customer.

Incoming Email Settings for the libraries in My Sites and Personal Sites

Similar Messages

Maybe you are looking for