Incompatible protocol versions

I am attempting to run an iphone application on an iphone 4.3 simulator. I have confirmed that I can talk to the Unwired Server by seeing that my client is contacting the server in the logs. However, I am getting the following message in the xcode console:
[INFO] [CallbackHandler.m:46] =============================
[ERROR] [CallbackHandler.m:47] Message Exception
[ERROR] [CallbackHandler.m:48] SUPPersistenceException: Device and server are not using compatible protocol versions: client protocol version = 1, server protocol version = -1.
[INFO] [CallbackHandler.m:49] =============================
I saw a similar question regarding this in the context of a blackberry app in the forums, but the error was a bit different and the solution (simply resetting the simulator) did not work for me. Has anyone encountered this issue before? If so can you explain what is going on here and how you got past it?
Thanks!
Jesse

Please check the MBO deployed in the server is same as what you were using in the client side development.
Regards,
Ram

Similar Messages

  • Detected another cluster senior running on an incompatible protocol at null

    Recently saw this confusing error. I'm not sure what "null" should have been but I think the error is erroneous also since everything I have is running 3.7.1.1.
    -Andrew
    0656PM.log-2012-03-01 20:23:35.016/5246.928 Oracle Coherence GE 3.7.1.1 <Error> (thread=Cluster, member=16): Detected another cluster senior, running on an incompatible protocol at null manual intervention may be required

    If none of the troubleshooting for the display adaptor (graphics card driver update, BadDrivres.txt etc.) do not work, we have to understand that the display could actually not be supported. By display, I mean the card-driver-driver version combination. So,
    1. It could be a bad card - None of the available drivers work for the application. Here, ditch the card and get a newer one that works.
    2. It could be a bad driver - For e.g. Only DirectX drivers work, OpenGL ones could be pathetic (Many games detect this and if this is bad, I have seen Photoshop struggle with this). Or some display configurations would be badly supported (multiple monitors, some funny resolutions, some of the ports, crossfire etc.). Older drivers/cards/some OEM drivers etc. have these issues in my experience.
    3. It could be a bad driver version - Here upgrade or a downgrade works.
    Because of a Video editor, the (lack of) capabilities of the card is highlighted. Video Playback alone doesn't nearly exercise the capabilities the cards usually have to offer. Editing really does. That is why it matters if the Video Editor actually says that it supports Graphics acceleration (Or GPU acceleration) for any of the workflows.
    What I am saying here is that when we blame the application for any of the issues, we have to be certain that the issues are NOT due to one of the mentioned three causes. I have seen this all too often in the gaming forums, Nero forums (some years back), in PPro forum, and here. If the application menufacturer is really to blame, the mistake would be all too obvious and too many of us would have complained about it. I do not think this is the case with Premiere Elements 10.
    Introspection works.

  • Bridge will not open after upgrading Reason: Incompatible library version OSX 10.6.8

    I decided I would upgrade Bridge CC today, and it turns out that was a very bad idea. I have a ton of work and Bridge will not open. I can't revert back to the older bridge CC.
    PLEASE HELP!!!
    Reason: Incompatible library version: dvanet requires version 7.0.0 or later, but libcurl.4.dylib provides version 6.0.0

    I decided I would upgrade Bridge CC today, and it turns out that was a very bad idea. I have a ton of work and Bridge will not open. I can't revert back to the older bridge CC.
    PLEASE HELP!!!
    Reason: Incompatible library version: dvanet requires version 7.0.0 or later, but libcurl.4.dylib provides version 6.0.0

  • Transport protocol version error in Integration Directory API

    Hi All,
    I am trying to create SOAP receiver communication channel using Java-only PI 7.31 directory APIs. I have passed all the required parameters to the CommunicationChannelIn service, but it's throwing error - "Enter at least one object key for operation 'create'".
    When I tried to test the service through WS Navigator, it's giving exception - "Enter a value for attribute 'Transport Protocol Version'" which doesn't exists in case of SOAP adapter creation.
    Has anybody come across this issue? If the adapter metadata does not specify any transport protocol version, then shouldn’t the validation checks in  CommunicationChannelIn service provider proceed without errors on a blank value for this attribute?
    Note: I have gone through all the SCN blogs, discussion threads we have on topics related to Integration Directory API.
    Thanks in advance for all the help and suggestions.
    Regards,
    Yashu Vyas

    Hi All,
    I am trying to create SOAP receiver communication channel using Java-only PI 7.31 directory APIs. I have passed all the required parameters to the CommunicationChannelIn service, but it's throwing error - "Enter at least one object key for operation 'create'".
    When I tried to test the service through WS Navigator, it's giving exception - "Enter a value for attribute 'Transport Protocol Version'" which doesn't exists in case of SOAP adapter creation.
    Has anybody come across this issue? If the adapter metadata does not specify any transport protocol version, then shouldn’t the validation checks in  CommunicationChannelIn service provider proceed without errors on a blank value for this attribute?
    Note: I have gone through all the SCN blogs, discussion threads we have on topics related to Integration Directory API.
    Thanks in advance for all the help and suggestions.
    Regards,
    Yashu Vyas

  • Dashcode quits at the startup, Incompatible library version

    Hi all, I'm on Snow Leopard (10.6.8) and I have a problem with Dashcode.
    It quits at the startup because:
    Dyld Error Message:   Library not loaded: /usr/lib/libcurl.4.dylib  
    Referenced from: /Applications/Utilities/Dashcode.app/Contents/MacOS/../Frameworks/CYKit.
    Reason: Incompatible library version: CYKit requires version 7.0.0 or later, but libcurl.4.dylib provides version 6.0.0
    How do I do?
    Is it possible to update this Library?
    Sorry if the question is dummy, I'm totally newbie...
    thank you in advance for your help

    Hi! no one can give me some help? please...

  • Question about ssh login warning: Bad protocol version identification

    I set up ssh on my computer according to Tim Haigh's suggestions given here:
    http://discussions.apple.com/thread.jspa?threadID=1674968&tstart=0
    But when I log in from my iPhone, secure.log shows this:
    sshd[534]: Bad protocol version identification 'GET / HTTP/1.1' from 208.54.83.51
    Although I do log in successfully, how can I resolve this error?

    GET / HTTP/1.1
    Looks more like a Web browser handshake, than ssh.

  • Incompatible class versions :linkage error- JAVADOM

    HI,
       We have done Mapping using java DOm,created ZIp file & successfully imported in IR.  
    My NWDS is using java 1.4.2_15
    we are using PI70/Sp09/Java Version 1.5.0_14
    During Execution in IE we  are getting this error.
    error -
    <SAP:Code area="MAPPING">LINKAGE_ERROR</SAP:Code>
    <SAP:Stack>Incompatible class versions (linkage error)</SAP:Stack>
    <Trace level="1" type="T">Interface Mapping http://XI/Mapping/JavaDom/DOMMapping4 IM_ORDER1_ORDER</Trace>
      <Trace level="1" type="T">LinkageError at JavaMapping.load(): Could not load class: CSJAVA/com/yash/xi/DOMMapping4</Trace>
      <Trace level="1" type="T">java.lang.NoClassDefFoundError: JAVA/com/xi/DOMMapping4 (wrong name: com//xi/DOMMapping4) at java.lang.ClassLoader.defineClass0
    Regards
    shekar chandra

    Hi,
    Check the links they may help u out.
    Event or DOM parsing?
    http://discuss.joelonsoftware.com/default.asp?design.4.156750.12
    XML Parsers: DOM and SAX Put to the Test
    http://www.devx.com/xml/Article/16922/1954?pf=true
    Regards,
    Phani

  • The vm and host networking components failed to negotiate protocol version '4.0'

    Hi,
    I have the problem that when I start a VM with windows server 2012 on a hyper-v v2 host, it takes very long till the VM get bind the static or dynamic ip adress. I tried both, static and dynamic. In every case I see at the event viewer the following error:
    the vm and host networking components failed to negotiate protocol version '4.0'
    After a few minutes the VM gets bind the IP an everything works fine. But at the next time I reboot the machine the same failure appear.
    Trying to use legacy network adapter results in the same problem. After this I tried to export the vm to a hyper-v v3 host. At first boot time
    the problem didn't appear and the vm get's bind the ip adress without problems. Then after upgrading the integration services to hyper-v v3
    version the same problem appears but without register it in the event viewer.
    Does anybody know how I can fix this problem?
    Kind Regards,
    Marcus

    Hi,
    A MS KB records an issue when you run Windows 8 or Windows Server 2012 based Virtual machine in Windows Server 2008 or in Windows Server 2008R2:
    http://support.microsoft.com/kb/2744129
    There is a Microsoft update in this KB, you may install this KB in your Windows Server 2008 R2 and check the result.
    While about this issue after you migrate the guest VM to Windows Server 2012 host, will it still has such error message after you remove all network adapters of the guest VM?
    Install Windows update for the Hyper-V host, after that upgrade Integration service for the guest VM again to check the result.
    For more information please refer to following MS articles:
    "Unsupported configuration" warning when you run a Windows 8-based or Windows Server 2012-based virtual machine in Windows Server 2008 R2
    http://support.microsoft.com/kb/2737297
    Hyper-V Overview
    http://technet.microsoft.com/en-us/library/hh831531.aspx
    Lawrence
    TechNet Community Support

  • Which protocol version is really used?

    In the JSSE reference guide, Appendix A: Standard Names, is said, that the protocol name passed to the getInstance method of the SSLContext class maybe one of the following: SSL, SSLv2, SSLv3, TLS, TLSv1. But it does not specify which protocol version will actually be used, it is always said that it supports one or some specific protocols, but it may support other protocol versions as well.
    And what does the setEnabledProtocols method of the SSLSocket class do? May an application specify here exactly, which protocols should be used?

    JSSE currently supports SSL v3.0 and TLS v1.0 (SSL v3.1).
    The protocol agreeded with the server depends on your client/server configuration, and always is the lower protocol supported by both of them.
    For example:
    Server -> TLS v1.0
    Client -> SSL v3.0
    The shared protocol will be SSL v3.0.
    About the getEnabledProtocols() method, give a look here:
    http://java.sun.com/j2se/1.4/docs/guide/security/jsse/JSSERefGuide.html#NewMethods
    Hope this helps.

  • The VM and host networking components failed to negotiate protocol version '5.0'

    I have been searching for a fix for this issue for sometime.
    The VM and host networking components failed to negotiate protocol version '5.0'
    and
    The VM and host networking components failed to negotiate protocol version '4.0'
    this error have been posting on the host server 2008 R2, with a hyper-V running server 2012 R2, which is the eval version vhd from Microsoft.
    I have tried the patch on the server 2008 R2 host and the nic delete and rescan option with varied reboots and such between each step of the process just to try every possible combination.
    The error persists. Are there any other suggested solutions for fixing this problem. Also the drivers have all been updated along with the system firmware.
    thanks,

    The hotfix states Server 2012 in the VM. You stated Server 2012 R2 in the VM.  MSFT is very precise in this language - Server 2012 != Server 2012 R2.
    Two distinctly different releases of Windows Server.
    In this case the N = the running release of Hyper-V.  In this case your Hyper-V Server at release version 2008 R2.
    The +2 = the current version of Windows.  In this case that is 2012 R2.  Two releases ahead of the version of the hypervisor you are running.
    I tossed in the link to Ben Armstrong's blog article as that is the ONLY (and still definitive statement) support statement regarding this configuration.  He posted that article at my request after many folks posting in this forum with strange behavior
    in this configuration.
    "supported" in this context means that if you call CSS, you will be told the following: 'yes, you have errors in the event log.  We will not fix that.  This is an unsupported configuration.  But that does not block the OS in the
    VM running.  If you want the errors to go away, we suggest you upgrade your Hyper-V Server to 2012 R2.  That configuration is supported.'
    That said, it can impact other functionality of the VM that rely on Integration Components in the VM and the Services of the hypervisor.  There is most likely small things that will not work.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • Incompatible Xalan version in IDE class path?  (Max OS X Leopard)

    Hi all,
    I have been using NetBeans 6.1 for a while and all was well. I then installed a few plug-ins (including iReport, which I believe may be the problem). When I start the IDE I get the error "Incompatible Xalan version found in IDE class phat" and gives some link that didn't help. I have uninstalled NetBeans and reinstalled, which obviously didn't fix the problem. If anybody can help me at all, I would appreciate it very much. I really need this to run, I would hate to completely reinstall the OS to get it back going. Thanks in advance for any support.
    Edited by: JavaChip on Jul 7, 2008 4:32 PM

    Hi,
    I encountered this problem today and I'm also using Netbeans 6.1 on Mac OS X (10.5.4). It was definitely the iReports plugin. I found a solution here:
    [http://blogs.sun.com/geertjan/entry/analyzing_the_jasperreports_visual_designer]
    However, I only had to remove the file xalan.jar (and keep xalan-2.7.0.jar) from the ~/.netbeans/6.1/modules/ext directory. No changes to the config were required and the iReport plugin worked.
    Edited by: d_herb on Aug 5, 2008 7:45 AM

  • Is HLS protocol version 6 is supported in IOS 6.x and IOS 7.x ?

    Is the latest HLS protocol version (version 6) is supported in IOS 6.x and IOS 7.x players ?
    If it is supported can you please provide a sample m3u8 with EXT-X-START tag ?

    I use native player and start play from web page in Safari
    Master playlist
    #EXTM3U
    #EXT-X-MEDIA:TYPE=SUBTITLES,GROUP-ID="WebVTT",NAME="Main",DEFAULT=NO,AUTOSELECT= NO,URI="http://172.18.0.81:8080/mediaserver/download/2/service.523/item.m3u8?playlist=we bvtt"
    #EXT-X-STREAM-INF:BANDWIDTH=16777216,SUBTITLES="WebVTT"
    http://172.18.0.81:8080/mediaserver/download/2/service.523/item.m3u8?playlist=da ta
    segmets playlist
    #EXTM3U
    #EXT-X-VERSION:4
    #EXT-X-TARGETDURATION:1
    #EXT-X-MEDIA-SEQUENCE:2280
    #EXT-X-ALLOW-CACHE:NO
    #EXTINF:1
    http://172.18.0.81:8080/mediaserver/download/2/service.523/item.ts?chunk=1
    #EXTINF:1
    http://172.18.0.81:8080/mediaserver/download/2/service.523/item.ts?chunk=2
    #EXTINF:1
    http://172.18.0.81:8080/mediaserver/download/2/service.523/item.ts?chunk=3

  • An incompatible xalan version has been detected on the ide's classpath OSX

    Hi all,
    I have tried to install netbeans/java tools bundle on my mac, keep getting the same error.
    an incompatible xalan version has been detected on the ide's classpath. The IDE cannot start. pLease see http://wiki.java.net/bin/view/Netbeans/FaqXalanOnCP for more info.
    I have had a look at this website, it says to Due to a bug in Xalan, project metadata may get corrupted when a Xalan is on the IDE classpath. For this reason, the IDE refuses to start when the broken Xalan is detected on the classpath. Please remove the Xalan under jre/lib/**.
    This is quite difficult as it does not tell me the path where this file exists.
    Can anyone please help me out??

    That "someone" is each individual Firefox user who encounters problems like this. Mozilla stopped doing its' "web evangelism" program to help and advise websites about fixing their websites. I suppose 7 years was long enough to try fixing the web, and their time was better spent concentrating on improving Firefox.
    My advice is to install an older version of Firefox Portable to use at that web site, and to continue using your current version of Firefox elsewhere. <br />
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • OCI/UPI Protocol Versions

    Hi,
    I need to know what OCI/UPI Protocol Versions my Application uses. Where can i see that? Who helps me ?
    Thanks

    Please reread your post with the following questions in mind:
    1. What application are you talking about? Does it have a name?
    2. Does this have anything to do with Oracle the database? If so describe how?
    3. What version of Oracle, the database, to a minimum of 3 decimal places?
    4. Why do you need this information? What is the purpose?

  • Protocol version of IEEE 802.1x

    Hi,Sir.
    I ask question of dot1x's protocol version.
    I want to configure version 1 of IEEE802.1x.
    But, defaut version is 2 from IOS 12.2(25)SEE.
    Could you tell me, how to configure for version 1 fo IEEE 802.1x.
    (I use WS-C2950G-48TC-L)
    Ryusuke

    Hi,
    Our network is design for version 1 of IEEE 802.1X.
    We have some Catalyst switch.
    WS-C2970G-24TS-E
    WS-C3560G-48TS-S
    These are running IOS at 12.2(25)SEC.
    (This protocol version of IEEE 802.1X is 1)
    I can't anthenticate when WS-C2960G-48TC-L is running IOS 12.2(40)SE.
    (This protocol viersion of IEEE 802.1X is 2)
    I can't authenticate when WS-C3560G-48TS-S is running IOS at 12.2(40)SE.
    But I can authenticate when WS-C3560G-48TS-S is running IOS at 12.2(25)SEC.
    (These are same configuration)
    I think this problem is version 2 of IEEE 802.1X.
    (My configuration for version 1 of IEEE 802.1X)
    I want to resolve this problem.
    Best regards.
    Ryusuke.

Maybe you are looking for