Inconsistency in receiveing the messages in inbound Proxy in SAP from XI
Hi All,
We have a Scenario where our Source System is Websphere MQ and target system is SAP Deposit Management System.
To post the data in SAP DM we are using inbound ABAP Proxy
There is an inconsistency in receiveing the messages in inbound Proxy.
eg When multiple messages are put into a MQ Queue only few of them are being picked up by Inbound Proxy.
Thanks in Advance
Hi Amit,
This problem can be found only by analysing it in RWB. Just analuse via RWB or MONI and check the payload at sender side and receiver side then you can find the problem.
I think in the sender communication channel it has the problem. if it is there in Sender side payload then there would be missing in the mapping also. Just check that the top parent of target is gettting generated with some messages which are missing.
Warm Regards,
Vijay
Similar Messages
-
When I try to connect to a link I receive the message "Search bookmarks and history" and FF won't connect to the link requested. VER FF 3.6.6. Windows7; 64 bit.
I have currently FF 3.6.8 running under Windows XP 32 bit. I am using Multiproxy Switch ver 1.33 add-on to switch between multiple proxies.
My FF starting page is http://www.google.com/ncr . When I start Firefox and the actually configured proxy is unreachable, I get the usual message that the page cannot be opened ("Try again"). Then I switch to another proxy or to direct connection. Normally the desired page (google) opens. But in case I switch the proxy before the error message appears, this grayed message "Search Bookmarks and History" appears instead of the URL in the URL input field and I have to retype the URL.
Remark: I would really like to have this function "Searching Bookmarks and History" available in Firefox, because I often do this kind of search and need 4 clicks to get there (Bookmarks-Organize Bookmarks-Bookmarks Menu-and then input my search criteria). -
After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.
rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades. -
I hope I'm in the right place since I was sort of redirected here Recently I have been receiving the message that my startup disc is full and that I need to make room by deleting files. At first I received the message when I left my computer unattended with my virtual machine on, using VMWare Fusion to run Windows. Recently though, I got the message when I left my computer unattended for about 6 hours without the virtual machine running. As an aside, I get extremely nervous when anything freezes VMWare because it is usually a nightmare to get back into Windows if I can at all without calling Tech Support. This new message however, appeared without the virtual machine active, so I was relieved that VMWare most likely was not the cause. After reading a number of Tech Support articles and Community discussion questions and answers, I started wondering if iTunes or the SMC firmware or a combination thereof may be causing the problems. Mind you I know nothing about the SMC stuff because as I said, I am really new to Mac and know very little about computer code or processors or any of that stuff. But I do know that iTunes has recently been giving me some trouble, such as opening on start up and I can't figure out why and messing around with my iTunes libraries. I also read about the SMC firmware and the computer's sleep cycle so that sort of made sense. But I seriously need advice from someone a lot smarter than me. So, before you ask, both iTunes and my SMC firmware are up to date. I'm running a mid-2007 iMac Intel Core 2 Duo Processor with 2.4 GHz of speed.
You may not need all this junk, but in case you do, since the message tells me to make room and delete files, here goes. Now, if I need to make space and delete files, this is where I get confused and it's probably very simple but I'm still a relatively new Mac user and I still can't seem to find all the info about my Mac! I'm not exactly sure how much space I have left on my hard drive. I had to replace my hard drive last December and the invoice says it is a 500 GB 7200 SATA hard drive. For some reason I thought I had more than that. Regardless, System Profiler shows 10.26 GB currently available, 499.76 used; I assume that the used portion includes my partitioned drive that has my virtual machine on it? I may be using the wrong language when calling it that but that's how I understand it as a "partitioned drive". Now, when looking at the System Profiler, under Volumes, Capacity 209 MB writable diskOs1 - I think this my Virtual Machine. I also have three Western Digital drives that I use for Time Machine and for pictures and music; however, as I said, I am still new with Macs and do not fully understand the file structure so there may be pictures on my Mac hard drive that are duplicated on 1 or more of my WD drives but I don't know how to find them or if I do, I'm afraid to delete them. Of these WD external drives, 1 is 500 GB and is full with Time Machine backups; the 2nd WD drive is 3 TB and has 2.18 TB available and is currently being used for Time Machine backups; the final WD drive is 1 TB Firewire and currently has 694.33 GB available.
Any help would be appreciated. Please forgive any inaccurate terms or mis-statements of terminology as I do not really know what I'm talking about as far as the pieces and parts of the operating system; I'm just trying my best to describe what I see.
One more piece of advice that I would appreciate would be recommendations about a good file cleaner, for duplicates, messy file structure, space utilization software; it also needs to be idiot proof software. I have a trial version of Appdelete that I never really used and I have the purchased version of Tune Up My Mac that I haven't spent much time with because I'm afraid I'll delete something I shouldn't
Thank you for your help
MemalynHi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
Time capsule has been working perfectly for months.
Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??What OS are you running??
It is very typical Yosemite issue.
1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
From my screenshot you can see the TC address is 192.168.2.57
It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
2. In Finder use Go, Connect to server.
Type in SMB://192.168.2.57 (replace with IP you discover).
If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented. -
After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic) -
Even though I have the Pages 5.0.1 installed as the default software, I still receive the message “You need a newer version of pages to open this document.” HELP!
Please clarify....
Mac OS X (10.4.6)
What your system profile shows yet, you posted in the ML forums. -
I was able to use firefox, but all my bookmarks and history disappeared. Also, the forward and back arrow and refresh buttons weren't working. I followed the directions for restoring firefox profiles, and that didn't work. I wasn't able to open firefox again, and I received the message: "a copy of firefox is already open. only one copy of firefox can be open at a time." I tried closing firefox, even uninstalling it and reinstalling another file, but I still get the same message over and over again.
Hello Nicole.
If that's the message that appears, hHopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Firefox+hangs -
I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated". what does this mean and/or entail?
Mavericks is not recognizing the .smi extension - on my Mac it thinks it's a RealPlayer document. You are not going to be able to do anything with this - it requires AppleWorks to be present to be updated, and you can't run AppleWorks on Mavericks (other than by the rather roundabout process of installing Snow Leopard Server in Parallels and installing AppleWorks on that, as described here).
-
How do I correct the problem that every timeI boot up I receive the message that “iCal cannot log in to your iCloud accountbecause you password is incorrect…” I do enter it correctly but the same errormessage comes up the next time the computer boots up? Thanks.
Hello jwpg,
Thank you for the details of the issue you are experiencing after restoring an iCloud backup. I recommend the following articles for an issue like this:
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am trying to update iTunes and keep receiving the message "The folder path "My Music" contains an invalid character.
The folder where everything is stored isnt even called My Music, it is just called Music.
I gave up on trying to update my itunes and removed it and am trying to re-download but receive the same message. Now I have no itunes on my computer at all.
Short or wiping my computer and starting again I have no ideas left.
Please help!That message isn't referring to the location of the music, it's referring to the location of the iTunes programme.
So the message is either referring to the download location or the folder it is trying to install the programme in. I think (I wouldn't put money on this) that invalid characters will be things such as * ^ % and so on. When you get the message, look for the location that your computer is trying to use. Are there any strange characters in the "file path" that your computer is using? -
when i send a text message with my new iphone 5 to my wife who is now using my old Iphone 4 we both receive the message. How is this possible? Also she receives all text messages sent to me. She obviously has a different phone number and a different provider
See here to create a new apple ID
http://support.apple.com/kb/HE37
good luck -
When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all. Any help is greatly appreciated.
Hey Grupo Castillo,
Thanks for the question. You can actually configure this behavior from Mail preferences:
1. Choose Preferences from the Mail menu.
2. Click Composing.
3. Deselect the checkbox for "When sending to a group, show all member addresses".
When you send an email to the group, only the groups name will be seen.
Mac OS X: Mail - How to Hide Address Book Group Member Names When Sending an Email
http://support.apple.com/kb/TA21082
Thanks,
Matt M. -
When I attempt to open an Aperture backup on a remote drive using the Command key when opening Aperture., I receive the message-
How do access these files?How do I copy the libray onto another drive? Drag & drop? Can I put it onto my iMac drive without loosing the Aperture files already there?
yes, you can drag the library to your internal drive. if it has the same name as your current Aperture library rename it or drag it to a different folder.
I followed the instrucitons when formatting the drive, although I would not rule out an operator error
You can see the name of the file system on the drive, when you select the drive in the Finder and press the key combination ⌘I (for File > Get Info). The file system will show in the "General" brick of the Info panel.
Maybe you are looking for
-
Burned DVD's rejected by other computers
Using my Intel iMac, I burned two DVD's from iPhoto. One to be viewed in iPhoto and one for veiwing in Finder. Both of these disks were rejected by my sister's macbookPro. They don't mount but just eject. What's going on here?
-
How to deal with multiple language SQL script?
Hi All, We now want to create a SQL script that contains multiple languages(English, Chinese, Japanese), this script need to be run at there different database installed on different OS, for example, Oracle9i on Windows 2000 English Edition/Chinese E
-
Accidentally nuked Garage Band audio instruments and samples a while back. I replaced the files with files from a friends comp, but still some files can't be found. For example, ESX24 String Ensemble cant find this file [probably more in the series]
-
Auto-stacking thumbnails by name
I'm looking for a script that will recursively crawl through a folder and stack all images with the same name (minus extension,) so that any metadata that gets entered by a user will be applied to both raw and jpg files. Our photographers are in the
-
Drag & drop stops working when I drag outside the top-level window
I have implemented drag & drop in my application, using the pre-JDK 1.4 approach. It works fine until I drag outside the top-level window, then back in again. My drop target receives a dragExit, but doesn't get a dragEnter when I drag back in. It the