Inconsistent JTAPI version between IP-IVR and CUCM

Hi,
we are experiencing a problem between CUCM and IP-IVR. Each time we try to log on IP-IVR administration, we can observe a message indicating that JTAPI versions between CUCM and IP-IVR are inconsistent. We have tried to synchronize versions using synchronize task from IP-IVR administration unsuccesfully.
The IP-IVR works fine, but the message is so annoying.
Any ideas?
Regards

If you are using a Linux CUCM and the associated IP IVR version for this, go to Start->Run and type 'cet'
Click No at the prompt
Click on ClusterDependentConfig
Double click on the node you are working on. Most likely the one with Key Value of 1
Click on the ClusterDependentConfig tab
Match the string next to JTAPI version to what is found in the jcu*.log in C:\
You may have multiple jcu.log files, so open up jcuCurrentLog.txt to see which one is the current log file.
It should take the form of "7.1(2.10000)-3" or similar.
Post back if you are not using a Linux version of CUCM and I'll give you the process for Windows.

Similar Messages

Cloning use the different gcc version between source system and target sys

Hi All,
Our system is: Application tier and Database tier is split to two servers.
We should run a cloning, but I found the different gcc version on application tier on source system and target system.
The source application tier server is RedHat Linux ES3, gcc version is 3.2.3
The target application tier server is RedHat Linux ES3, gcc version is 2.9.6
There is the same gcc version on database tier on source system and target system, they are gcc 2.9.6.
My question: Can I use the different gcc version between source system and target system when I run an erp cloning?
Thanks & Regards
Owen

Not necessarily, you might get some errors if the version is higher and it is not supported by the OS. An example is Note: 392311.1 - usr/lib/gcc/i386-redhat-linux/3.4.5/libgcc_s.so: undefined reference to 'dl_iterate_phdr@GLIBC_2.2.4'
To be on the safe side, make sure you have the same version (unless you want to give it a try).

Inconsistent date formats between Rich Client and HTML client

Hey All,
Just wondering if anyone has come across an issue with inconsistent date formats from a universe based on an MS SSAS 2012 database connection in 4.x?
The value of the date is returned as a string from the query but the object data type has been changed to a Date object meaning BusinessObjects should convert the string into a date if the format is correct.
The problem in this is that the date being returned in Rich Client is in dd/MM/yyyy format whereas on the Web Client is in MM/dd/yyyy.
From the Web Client business objects will return a date, however, it is a mix of MDY and DMY format.
i.e. 15th of March will be displayed as 15/03/2014
whereas 12th of March will be displayed as 03/12/2014
All our application servers are configured for English (Australian) regional settings meaning all dates should be in DMY format.
The date in the database is stored as a non-ambiguous yyyy-mm-dd format so it appears the variation is occurring somewhere between the database and BusinessObjects for the Web Client based reports only.
I have also checked the sqlsrv.prm file based format and changed this to DMY but this has also not made a difference.
The same universe in 3.1 and MS SSAS 2008 works correctly but not this one.

Hi
The date in the database is stored as yyyy-mm-dd format.
As per user request.... Set the date format @ the Business layer level. so it will refelct same as in the WebI.
Please find the below link. how to use custom Display option.
BI4.1 Business Layer Enhancements - Create Display Format

Mac OS versions between 10.7 and 10.8

Hi everyone,
I am very new working on Mac, but I need to test an application on different Mac OS versions, so I have some question:
1. Are there Mac OS versions between 10.7.5 and 10.8?, I mean 10.7.6, 10.7.7, 10.7.8 and 10.7.9.
2. If yes, where can I find/ download these versions?
This information is so important to me.
Thanks in advance
Regards,
Laura.

No, there aren't.
(107385)

What's the difference between IP IVR and UCCX 9

Hello,
We are planning to deploy UCCX 9 in our environment, just wondering if we do order the UCCX 9 premium version, do we still need to implement IP IVR?
If so, is that require additional licenses?
Thanks,

CCX Premium does, yes. They are the same software, the license keys just activate different subsystems.
Additional information on the features per license level is available in the CCX SRND.
Please remember to rate helpful responses and identify helpful or correct answers.

Is there an itunes version between 10.7 and 11.1.4

because 11.1.4 just lost 40 gigs of music, and now my itunes wont start.

Click here, or here if you're using a G3. iTunes 9.2.1 is the last version compatible with 10.4.11.
(108053)

Versions Between ......

Evaluate the following statements:
CREATE TABLE digits
(id NUMBER(2),
description VARCHAR2(15));
INSERT INTO digits VALUES (1,'ONE');
UPDATE digits SET description ='TWO' WHERE id=1;
INSERT INTO digits VALUES (2,'TWO');
COMMIT;
DELETE FROM digits;
SELECT description FROM digits
VERSIONS BETWEEN TIMESTAMP MINVALUE AND MAXVALUE;
What is the meaning of this line here:
VERSIONS BETWEEN TIMESTAMP MINVALUE AND MAXVALUE;
Please explain
what will be the output of this?

the query that i posted in my 1st post,the output of the select query should display the values ONE, TWO, and TWO but i checked it out and its displaying Two,Two.
Please explain?
Edited by: gOMzY on Sep 3, 2010 11:29 PM

Compare object version between BW system

Hi,
I want to check object version between DEV system and Quality System.
Is there any program to do that in BI7?
Regards,

Hi Kobul,
For that you should write an ABAP coding using
BAPI_IOBJ_GETDETAIL to compare the object version of the two systems.
Regards,
Yokesh.

CUCM and UCCX JTAPI version 7.1(5) vs 7.1(5b)

Wondering if any one has CUCM 7.1(5) running with UCCX and what JTAPI version is being used? Then if anyone is running CUCM 71(5b) and if what version of JTAPI is being used? Running into bug on CUCM 7.1(3) CSCtb77537 and need to upgrade.

Hi
I recently had a cust with this problem on 7.1(3); upgraded them to 7.1(5) and all was well afterwards.
The version of JTAPI you use is the version of JTAPI that comes with whatever CCM version you install; so no point getting hung up on that - just remember to ensure all your JTAPI apps have their version upgraded to match (as with any TAPI apps).
Regards
Aaron
Please rate helpful posts..

Generic PG with CUCM, IP IVR and CVP

Hello
Does any one know if it is possible to have a Generic PG with pims for CUCM, IP IVR and CVP?
Thanks in advance
Victor

Hi
Be aware there are a few different versions of UCCX - the prices vary quite a lot based on the standard/enhanced/premium version you go for.
Premium adds some of the things you said you aren't interested in (outbound, agent email etc), so you can probably get away with Enhanced - but really check the requirements carefully. You lose a good number of advanced features such as db integration and so on.
If you drop another level to Standard, you lose even more - including loss of Agent Desktop in favour of IPPA. Tricky to recommend that in most cases...
http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps1846/data_sheet_c78-483369.html
Regards
Aaron

What is the difference between a full and a upgrade version?

When I want to buy photoshop elements 8.0 i can select a full or upgrade version, the price is alsmost thesame.
normally you would think a upgrade is just a upgrade and you can't use it if you don't already have photoshop Elements installed.
but in many online stores they only sell the upgrade version.
so that makes me believe you can buy it even tho you don't have any photoshop elements on your pc.
so what is the difference?

The only difference between the Upgrade and Full version is of the pricing. I believe right now Adobe is already offering PSE at $79 so there is no Upgrade option appearing on the website (although I am not sure about unavailability, I just stating what one of the user on the forum says).
Legally, you should be a previous customer of PSE to buy an upgrade version and I am not sure but I believe when one go for buying the Upgrade version they do need to provide the serial number of the previous verison.(not sure though)
Regards,
Ankush

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

If you mean the drop marker then you can still get the History of the Back and Forward buttons if any by either Left-Click and hold for a second or by Right-Clicking them.
If you still want the drop mark there also then there is this Extension at https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
Also the abbreviation for Firefox is '''Fx'''

Customise table inconsistency between ABAP Dictionary and the databas

Hi all,
I have encountered a problem where by, I was not able to activate a table due to inconsistency between ABAP Dictionary and the database.
After I run the SE14--> Check Database object. It has show that there is a missing Unique Index(Primary Index) at the Database Level, but at ABAP Dictionary it is there.
I have try to recreate the primary index at the Database level, but failed. Because one of the primary key field is been dropped from this table.
So now, may I know how can I still make this table Active again?
Is it save to folllow the following solution that I found on internet?
Syntax error in SDCC, table inconsistency between ABAP Dictionary and the database, transport error 8 during the generation of ABAP Dictionary. When you call Transaction SDCC, a termination occurs due to a putative syntax error because a table is not known or active. When you check this with the ABAP dictionary (SE11), you notice, that the table is active or inactive, however it is not possible to activate it. The activation might terminate with the error message 'Inconsistency between ABAP Dictionary and database'. A check of the affected object also delivers this error.
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

I managed to solved this by
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

Is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5?

Hello,
Customer has a CUCM 6.1.5 cluster which is getting upgraded to 7.1.5. currently the CUCM CDR is sent to a external system (performix) which generates required reports. I would like to know if there is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5/ its vital to confirm this prior to upgrade as the performix is managed by a different vendor.
Please advise !
Shahid

You can review the CDR documentation here to find that out, most likely there might be some changes
Maintain and Operate Guides
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
CDR admin guides have the field definitions.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

What is the differences between the older version of Oracle Financials and the 11 i

What is the differences between the older version of Oracle Financials and 11i?

Vijay,Thanks for your answer,but I am still not clear about it,I have a instance to describe my question at detail.
    If there is a final product A, and the planning strategy for A is 20(MTO), the procurement type of A is F(external procurement) at the view mrp2 in the material master datas.
step1: I creat a sales order.
step2: run MRP for A.
step3: transfer the purchase requistion into a purchase order,and the field of acc.***.cat. in the purchase order will be filled out M automatically, because the acc.***.cat. in the planning strategy 20(MTO) is set with E.
    Well, the purchase order is created, what is the relationship between the sales order and the purchase order? What will be happened about costing between the SO and the PO?
    If I delete the E, I make the PO become a standard PO, what is difference between standard PO and the PO including E?
Best Regards
Bob

Inconsistent JTAPI version between IP-IVR and CUCM

Similar Messages

Maybe you are looking for