Inconsistent positioning of MovieClips

I need a grid of display objects (50x50 pixel squares) that I
use an AS3 script to create as a two-dimensional array. I have
already confirmed with the AS3 forum that the code works when the
objects displayed are not MovieClips. However, the positioning of
MovieClips is always haphazard. There are always seemingly random
aberrations in placement, with squares slightly overlapping each
other here and there. I have confirmed that the sizing of the
MovieClips are uniform.
What's the problem with MovieClip positioning?

it's your code that's the problem. either you're not
positioning them correctly or you registration point is
inconsistent.

Similar Messages

Processisng leads to inconsistent positions for 01.09.2010 Financial Trans.

Hi friends,
In FTR_EIDT transaction, while editing the "Decrease" option, system display the error,when i try to save the transaction.
Processisng leads to inconsistent positions for 01.09.2010 Financial Trans.No.5504100005
Message no. TPM_TRL063
Diagnosis
An error exists in the derived flows. Further processing would lead to inconsistent positions for 01.09.2010.
System Response
Processing was terminated.
Procedure
Contact SAP.
Please suggest me? How to solve this issue?
Thank you in advance
Chandra.

Hi Chandra R,
Please explain how you resolved this issue.
RJ

Processing leads to inconsistent positions

Hello
My client issues index bond, of which there is no standard product type for that, i have since created a new product type called 04Z, based on 04x and 04L. When i try to create a transaction, ftr_ create, transaction type 300, i get the error below; this happens when i try to save the transaction.
Processisng leads to inconsistent positions for 31.05.2023 Security ID Number NRA0230
Message no. TPM_TRL063
Diagnosis
An error exists in the derived flows. Further processing would lead to inconsistent positions for 31.05.2023.
System Response
Processing was terminated.
Procedure
Contact SAP.
what can be the problem in my settings
Thank you in advance
Victor
Edited by: Hein Nagel on Jan 4, 2010 8:34 AM

Hello Prasad,
I've error TPM_TRL063 with transaction RTPM_TRDT_DATA_EXEC, the final repayment is just tested in other deal and the procedure management it's also correct. I've just inserted the initial ID security write down and negotiation spread using transaction TMP63A and TPM63B, at the end of TPM63 run the problem occurs: the position value in TPM63A are correctly managed by the systema (no error) the write down and negotiation spread are in error (TPM_TRL063).
Best Regards
Mario

Processing leads to inconsistent positions.. Msg: TPM_TRL063

HI Experts:
I have the following Error when running the transaction TPM27:
Processing leads to inconsistent positions for 30.04.2011 CoCd:1040 ValArea001 ValCls0777 SEAcc:DEPXXXX
ID000000XXXXXXX
Message no. TPM_TRL063
Diagnosis
An error exists in the derived flows. Further processing would lead to inconsistent positions for 30.04.2011 .
CoCd:1040 ValArea001 ValCls0777 SEAcc:DEPXXXX ID000000XXXXXXXX
System Response
Processing was terminated.
It's mandatory to keep the definitions of business derivatives?
It's necessary to Run the TPM27 after created the Financial Operation in TS01.
I don't know that this are a customizing problem.
Please your help.
Best Regards.

Hi ,
Kindly provide the for that security account any transaction has happened , and provide the details of the flow related to the business transaction for that particular security account .

Position my movieclips Flash/Air on the screen.

How can I place my air files in the specific location on the monitor.
I have 3 movieclips at my project.
Let's say I want movieclip "A" to be at left bottom corner at my monitor.
movieclip "B" center the monitor.
movieclip "C" top right corner of the monitor.
I understand there's a lot different sizes of monitors available.
But how my air app will align the movieclips to the monitors?
I will really appreciate if anybody can help me.

You can read this tutorial: http://www.adobe.com/devnet/air/flex/quickstart/articles/launching_windows.html
The sample application itself is written in Flex, but the section on "Creating ActionScript windows" should give you some of the information you are looking for.
I also recommend that you read: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118666ade46-7e17.html
and: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118676a47e0-8000.html

Fluid Layout - stop changing resize position when movieclip is at certain position

Hello. I have been trying things out for hours, and I still can't get it.
I am following this Fluid Layout tutorial: http://active.tutsplus.com/tutorials/web-design/build-a-fluid-website-layout/
I added a Menu_mc on my stage. Initially, this should be at the center of the stage and when I click on it, it will tween on the upper left corner of the browser. However, when I resize the browser, the Menu_mc goes back to the center of the screen.
I have tried separating a different actionscript file where it is specifically for initialization of the object and another one for resizing. And then when I call it on my main AS file it goes like this:
// Add the symbols to stage
             var Menu_mc = new Menu_MC();
             addChild(Menu_mc);
             // Apply the alignment to the middle
             var Menu_InitParam = {
                 x:0.53,
                 y:0.35,
                 offsetX: -Menu_mc.width/2,
                 offsetY: -Menu_mc.height/2
             new InitFluidObject(Menu_mc,Menu_InitParam);
             var Menu_ResizeParam = {
                 x:Menu_mc.x,
                 y:Menu_mc.y,
                 offsetX: -Menu_mc.width/2,
                 offsetY: -Menu_mc.height/2
             new FluidObject(Menu_mc,Menu_ResizeParam);
But it seems futile. Could anyone please help? Thanks a lot!

Do you have any useful resources that I could perhaps check out? Haven't explored ANY javascript before =)

Move entire animation into new position

Hi I want to move my animation to a new position. But if I select every frame it moves only from where my time indicator is. How can I move everything to a new position?

Are you talking about moving to a new position on the stage or a new position on the timeline? If you want to move the animation, the action between two or more keyframes to a new position on the stage, the simplest solution is to cut and paste the frames into a movieClip and then position that movieClip on the stage where you want it to run. If you want to have the animation occur at a different time in the timeline, you can select the whole set of frames and then drag them to a new point in the timeline. You can even drag the frames to a different layer if you like.

Need help in creating logic

Hi all,
I need suggestion of all of you guys in approaching my goal. What i want to do is... I have a bow still at one place but can rotate at its pivot point and there is an arrow that is used to pull the thread of the bow, as i drag back the arrow then thread of the bow should pull and when drag furthur, bow's thread should lose.
Can anyone help me how can i approach this.. I have attached an image as a refrence here.

create a movieclip. on its timeline create 3 layers.
the3 shapes (the arrow, the bow and the draw string) should each be placed on their own layer
shape tween the bowstring and shape tween the bow and classic tween the arrow.
position that movieclip's reg point and transform point where ever you want.

Object & Array readability in AS 2

Hi,
I am having a problem with getting the data which I have put
in an Object and an Array.
I made a script which contains the object playField and the
Array tile.
The data in the array and object must be used to determine
the position of movieclips.
However in some functions the data in the array or in the
object cannot be read.
Please see the code I attached.
The things that do work:
- the object and array are created and work fine.
- the for loop works great and creates 24 movieclips
- in these 24 movieclips the movieclips named 1 to 24 are
placed correctly
- the button btn_scramble is placed correctly
This doesn't work:
- the placement of the gameWhite will work hover it will not
be placed on the X and Y position of playField.posX and
playField.posY;
- tracing the playField object ( trace(playField); ) in the
placeGameWhite() function will show: [object Object]
- However tracing the posX of the playField object in this
same function will show: undefined;
- The same happens with tracing tile and e.g. tile[4];
When I put the same traces in the this.btn_scramble.onRelease
function I get the same results.
I am using Flash 8, with Actionscript 2.
Can someone help me out?
I really do not understand why it is giving me such a hard
time.
Regards,
Bart-Jan

I am sorry but it doesn't work for me.
If you place a trace in the placeGameWhite function (to trace
the playField.posX) like this:
placeGameWhite = function() {
trace(playField.posX);
this.attachMovie("mc_spelWhite", "mc_spelWhite", saveDepth);
this.mc_spelWhite._y = playField.posY;
this.mc_spelWhite._x = playField.posX;
What do you see in your trace?
I will get an: undefined
though I expect a '150'
well basically thats my problem.
And thats not solved either...
I am getting frustrated because it worked fine and I do not
see why it suddenly changed ....

Unloading a movie clip from a for statement

Hi,
I have this code:
//create empty movie clips to place bin top, flame and bin
bottom in that order
this.createEmptyMovieClip("holder_mc2",this.getNextHighestDepth());
this.createEmptyMovieClip("holder_mc",this.getNextHighestDepth());
this.createEmptyMovieClip("holder_mc1",this.getNextHighestDepth());
//attach movie clip/variables
var dsfInstance:DropShadowFilter = new DropShadowFilter(5,
45, 0x000000, 1, 10, 10);
var b:MovieClip =
holder_mc2.attachMovie("binTop_mc","binTop_mc",holder_mc2.getNextHighestDepth());
var a:MovieClip =
holder_mc1.attachMovie("binBottom_mc","binBottom_mc",holder_mc1.getNextHighestDepth());
//property values
a._x = 419;
a._y = 244;
a._width = 112.0
a._height = 140.0
b._x = 419;
b._y = 175;
b._width = 112.8;
b._height = 10.1;
a.filters = [dsfInstance];
//create for loop to place the flame particle on the stage
many times
for(i=0;i<200;i++){
//places in temporary movieclip t
var t:MovieClip =
holder_mc.attachMovie("flame","flame"+i,holder_mc.getNextHighestDepth());
// position the movieclip on the stage for y co-ordinates
t._y = 190;
t._x = Math.random()*80+(Stage.width/2+115);
//give the flame random sizes no larger than 80 pixels and no
smaller than 20
t._xscale = t._yscale = Math.random()*80 + 20;
//randomize the frame the movieclip is going to start in the
flame movie clip is 16 frame long so it will pick number between
that
//because math.random produces decimal values we round the
number using math.ceil to the high whole number
t.gotoAndPlay(Math.ceil(Math.random()*16));
what i want to do is remove the movieclip in the for loop off
the stage when i click on a button. i can manage to remove the
movie clips with the variables a and b but i cant do it with the
one in the for loop.
i put this code in the button:
on(release){
play();
stopAllSounds();
a.removeMovieClip();
b.removeMovieClip();
t.removeMovieClip();
Is there a way to do this?

im so dumb! i figured it out.
i used the "holder_mc" the name of the empty movie clip.
holder_mc.removeMovieClip();

Columns for gallery!

Hi! I'm nearly there but I can't get this scipt to work!! Its
a basic gallery I'm building that imports images via xml with
thumnails. Problem is I started trying to make columns and it wont
work! I'm nearly there though I can smell it! The Column bit is
declaired at the top and in a for statement at the bottom! Can you
take a look?
Thanks Gavin

that last bit of code can't possibly work. you're trying to
position those movieclips before they even exist.
you had it right the first time. you just need to use
numimages instead of count:

Need Flash Guru: How can I create a 2D Simple tag cloud in Flash/AS3

I have done some searches, but couldn't find anything on Simple 2D tag clouds like this.
I don't need to make it animated, i just need to create a simple tag cloud in Flash. Please help!!
I just need two rows with 16 words, no animation, but texts got to fire onclick event as button.
Please help

1. create a movieclip that contains a textfield. give the textfield an instance name (say tf) and assign the movieclip a class (say MC).
2. create a textformat instance.
3. create an array of your words.
4. loop through your array of words
a. creating a movieclip for each word,
b. assign the textformat a size (a random integer between your desired limits should work),
c. assign the word to the text property of the textfield and
d. assign the textformat to the textfield and autosize your textfield
e. add the movieclip to the display list
f. position the movieclip (after the previously positioned one)
g. add your event listener (possibly using another array).

Character movement with mouse click

This will be for an MMO online game/ world. So it needs to be good.
Hi guys. I'm really happy I got this to work as I'm a neebie to AS3 but getting to love its simplicity. My problem is not my AS3 but my maths.
I click the mouse and the movieclip runs to the mouse's x position. However, it only goes in one direction ie: downwards and to the right.
I need to it go in all directions depending on where I click. I suppose it has to do with comparing x and y positions of both mouse and mc - ie: if one is bigger than the other then you can tell where both are positioned and then put the code in. Am I right and does anybody hace a little code like this flying around for me?
import flash.display.Stage;
import flash.events.Event;
stage.addEventListener(MouseEvent.CLICK, myClickReaction);
function myClickReaction (e:MouseEvent):void{
    sunny.gotoAndPlay("runback")
    //sunny.x = root.stage.mouseX
    //sunny.y = root.stage.mouseY
    addEventListener(Event.ENTER_FRAME, onEnterFrame);
function onEnterFrame(event:Event):void {
             var xDistance:Number
             var yDistance:Number
            //mc increments by 5 until it reaches mouse - mc (ie the distance)
            sunny.x += 5;
            sunny.y += 5;
            xDistance = root.stage.mouseX - sunny.x
            trace (xDistance)
            if (xDistance <= 0 ) {
            trace("works")
            sunny.gotoAndPlay("static")
            removeEventListener(Event.ENTER_FRAME, onEnterFrame);

Thanks for contacting but the code more or less works already apart from the comments below.
The position I get comparing mousex position and movieclip position. BUT it goes loopy when I move the mouse around. ie: I need the coordinates when I click and not a variable that changes while I move mouse around.
I will check it out now.
import flash.display.Stage;
import flash.events.Event;
stage.addEventListener(MouseEvent.CLICK, myClickReaction);
function myClickReaction (e:MouseEvent):void{
//sunny.x = root.stage.mouseX
//sunny.y = root.stage.mouseY
addEventListener(Event.ENTER_FRAME, onEnterFrame);
function onEnterFrame(event:Event):void {
             var xDistance:Number
    var yDistance:Number
   //mc increments by 5 until it reaches mouse - mc (ie the distance)
            // if you click to the right of sunny then mouse is > than sunny.x so x = 5
   if (root.stage.mouseX > sunny.x) {
    sunny.gotoAndPlay("walk right")
    sunny.x += 5;
    sunny.y += 0;
    xDistance = root.stage.mouseX - sunny.x
    //if (xDistance <= 0 ) {
    //sunny.gotoAndPlay("static")
    //removeEventListener(Event.ENTER_FRAME, onEnterFrame);

Load swf file in as 2

hi i want to in site.swf flash file load picture.swf flash
and show it in middle of site.swf is it possible?and can somewone
help me to how do this or give an example link

That's pretty straight forward, just use the code snippet
below
_root.createEmptyMovieClip("newMC", getNextHighestDepth());
newMC.loadMovie("yourswf.swf", this);
newMC._x = Stage.width / 2;
newMC._y = Stage.height / 2;
With the code above your newMC which has been created via
actionscript is loading any swf files into it, and positions the
movieclip exactly in the middle of the stage.

Checking three 'if' statements are correct or wrong

Hi Guys
I'm working on a quiz where a user has to drag three movie clips to correct positions then press the 'next' button to move on (calls funtion nxt)
I have nxt function to check to see if the three movie clips have been dragged onto the three correct positions (other movieclips), the code works but only if all three are correct.
I want the function to check to see if all the clips have hit the right target,
if so, then add +1 to the 'score' and go to frame 'end'
if the clips aren't on the right target then just go to frame 'end'
At the moment the nxt function doesn't work if the answers are wrong.
Can anyone point me in the right direction?
The quiz is here online, only four questions
and here's the code for question 4 that i need some help with...
function nxt(event:MouseEvent):void
if (asc1_mc.hitTestObject(blank1_mc))
if (shou_mc.hitTestObject(blank2_mc))
if (crossb_mc.hitTestObject(blank3_mc))
{score++;
gotoAndStop ("end")}
else
{gotoAndStop ("end")}

How about this?
function nxt(event:MouseEvent):void
     if ((asc1_mc.hitTestObject(blank1_mc)) &&
          (shou_mc.hitTestObject(blank2_mc)) &&
          (crossb_mc.hitTestObject(blank3_mc))
         score++;
     gotoAndStop ("end");

Inconsistent positioning of MovieClips

Similar Messages

Maybe you are looking for