Inconsistent records from report RMDMRPEXTRACT02 - MRP Extractor for LTP

Hi,
Report Name: RMDMRPEXTRACT02
Tcode: MSEX
This report resulting differnt number of records in each run. Since this report developed with the aid of parallelization we were not able to debug and identify where it goes wrong. And not able to find any relavant note if applicable.
Have anyone faced this kind of issue before and have a solution?
Your help is needed.

Hi,
Thanks for your reply. The problem is not with the MRP run. The problem is report RMDMRPEXTRACT02 is returning different number of records for each run.
say fpr example, if i run this report for 5 specific materials, sometimes i'll get 5 and sometimes 3/4 in the result set.
For performance resons, this report calls some RFC FMs parallely for each material and combines the result. so it is very difficult to trace the issue in debugging mode due to the parellel call.
thank you.

Similar Messages

Insert records from report program into R3 table

Hi
I wanted to insert records from report program into R3 table.
here is my code
data : itab type standard table of zemp initial size 10 with header line.
itab-EMPNO = '012'.
itab-ENAME = 'XXXX'.
itab-JOB = 'XXXX'.
APPEND itab.
insert ztable from table itab.
but i am getting the following error
the type of the data base table and work area/internal table "ITAB" are no unicode-converible.
how can I insert records from report program into R3 table
should I have to write move corresponding
pls guide
thanks
manian

Hi,
itab-EMPNO = '012'.
itab-ENAME = 'XXXX'.
itab-JOB = 'XXXX'.
APPEND itab.
insert ztable from table itab.
Do one thing
Data : itab type table of ztable with header line.
itab-EMPNO = '012'.
itab-ENAME = 'XXXX'.
itab-JOB = 'XXXX'.
APPEND itab.
insert ztable from table itab.
error will resolve, then try to make structure similar to ZTABLE

Two records from the same table in for loop

I have a table that holds teams, a table that holds scores and a table that holds match data.
I am finding it dificult to get the player data for the second team.
Currently It is showing player information for one team.
It does echo out the second team name, but not their player info.
Can someone have a look at my code and make it work.
I took off the code I had for the second team becuase it was ging me Error 1065
Main Query:
mysql_select_db($database_db, $db);
$query_match_fixtures = "select m.match_id, date_format(m.date, '%d/%m/%Y') as mDate, m.time, t1.division, m.report, t1.team_name as team1_name, s1.score as score1, t2.team_name as team2_name, s2.score as score2
from matches m left join (matchscores s1 left join team t1 on t1.team_id = s1.team) on (s1.match_id = m.match_id) left join (matchscores s2 left join team t2 on t2.team_id = s2.team) on (s2.match_id = m.match_id)
where s1.team <> s2.team AND m.match_id = $matchID
group by match_id
order by m.match_id";
$match_fixtures = mysql_query($query_match_fixtures, $db) or die(mysql_error());
//$row_match_fixtures = mysql_fetch_assoc($match_fixtures);
$totalRows_match_fixtures = mysql_num_rows($match_fixtures);
Player extraction:
mysql_select_db($database_db, $db);
$row_match_player = array();
for ($i = 0; $i < $totalRows_history; $i++)
    $row_history[$i] = mysql_fetch_assoc($history);
for ($i = 0; $i < $totalRows_match_fixtures; $i++)
    $row_match_fixtures[$i] = mysql_fetch_assoc($match_fixtures);
    $match_player_query = "SELECT *
                           FROM match_player
                            LEFT JOIN player on player.player_id = match_player.player_id
                            LEFT JOIN team ON player.team_id = team.team_id
                           WHERE match_id = ".$matchID."
                            AND team.team_name = '".$row_match_fixtures[$i]['team1_name']."'";
    $result_match_player = mysql_query($match_player_query, $db) or die("large error ".mysql_errno());
    $totalRows_match_player = mysql_num_rows($result_match_player);
    for ($r; $r < $totalRows_match_player; $r++)
        $temp_row_match_player[$r] = mysql_fetch_assoc($result_match_player);
    array_push($row_match_player, $temp_row_match_player);
The display table:
        <div class="tableHeading">
        <h2><?php echo $row_history['mDate']; ?></h2>
        </div>
        <table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td height="25" bgcolor="#000000"><div align="left" style="color:#FFFFFF"><strong>Type</strong></div></td>
    <td height="25" bgcolor="#000000"><div align="left" style="color:#FFFFFF"><strong>Home</strong></div></td>
    <td height="25" bgcolor="#000000"><div align="center" style="color:#FFFFFF"><strong>Score</strong></div></td>
    <td height="25" bgcolor="#000000"><div align="center" style="color:#FFFFFF"><strong>Away</strong></div></td>
    <td height="25" bgcolor="#000000"><div align="center" style="color:#FFFFFF"><strong>Kick-Off</strong></div></td>
    <td height="25" bgcolor="#000000"><div align="center" style="color:#FFFFFF"><strong>Venue</strong></div></td>
    <td height="25" bgcolor="#000000"><div align="center" style="color:#FFFFFF"><strong>Referee</strong></div></td>
</tr>
<tr>
    <?php foreach ($row_match_fixtures as $show_match_fixtures)
    { ?>
        <td height="25" bgcolor="#dfdfdf">
        <div align="left"><?php echo $show_match_fixtures['division']; ?></div>
        </td>
        <td height="25" bgcolor="#dfdfdf">
        <div align="left"><?php echo $show_match_fixtures['team1_name']; ?></div>
        </td>
        <td height="25" bgcolor="#dfdfdf">
        <div align="center"><?php echo $show_match_fixtures['score1']; ?> - <?php echo $show_match_fixtures['score2']; ?></div>
        </td>
        <td height="25" bgcolor="#dfdfdf">
        <div align="center"><?php echo $show_match_fixtures['team2_name']; ?></div>
        </td>
        <td height="25" bgcolor="#dfdfdf">
        
        <div align="center"><?php echo $row_history['time']; ?></div>
        </td>
        <td height="25" bgcolor="#dfdfdf">
        <div align="center"><?php echo $row_history['venue_name']; ?></div>
        </td>
        <td height="25" bgcolor="#dfdfdf">
        <div align="center"><?php echo $row_history['fname']; ?> <?php echo $row_history['sname']; ?></div>
        </td>
    </tr>
      <tr>
        <?php foreach ($row_match_player as $player_array)
               foreach ($player_array as $player_display)
        ?>
        <td valign="top">Goalscorers</td>
        <td>
          <?php echo $player_display['fname']." ".$player_display['sname']." (".$player_display['Goals']; ?>)<br />
        </td>
        <td> </td>
        <td>
          <?php echo $player_display['fname']." ".$player_display['sname']." (".$player_display['Goals']; ?>)<br />
        </td>
        <td> </td>
        <td> </td>
        <td> </td>
      </tr>
      <tr>
        <td valign="top">Yellow Cards</td>
        <td><?php echo $player_display['YC']; ?></td>
        <td> </td>
        <td><?php echo $player_display['YC']; ?></td>
        <td> </td>
        <td> </td>
        <td> </td>
      </tr>
      <tr>
        <td valign="top">Red Cards</td>
        <td><?php echo $player_display['RC']; ?></td>
        <td> </td>
        <td><?php echo $player_display['RC']; ?></td>
        <td> </td>
        <td> </td>
        <td> </td>
      </tr>
      <tr>
        <td valign="top">Man of the Match</td>
        <td><?php echo $player_display['fname']; ?> <?php echo $player_display['sname']; ?></td>
        <td> </td>
        <td><?php echo $player_display['fname']; ?> <?php echo $player_display['sname']; ?></td>
        <td> </td>
        <td> </td>
        <td> </td>
      </tr>
            <?php
                }// close and unset $player_display
                unset($player_display);
            } //close and unset $player_array
        unset($player_array);
     } //close and unset $show_match_fixtures
    unset($show_match_fixtures);?>
</table>
As you can see from the picture above the table is displayed with the name of the "goal scorer" for that team under (home) or Home team
When I try to create the same thing for away team I get a error, either a syntax error or 1065.
I tried having a foreach do two queries but that did not work.
Any help would be appriecated

I did try that, but I have messed it up.
Now the team names do not display at the top of the table.

Excluding record from reports

Hi,
I have a record in cube with combination material number M1,Plant P1,batch B1.
while running some of the report I want to exculde this record appearing in the bex reports.
Please advice me.
Thanks
Keith.

Hi,
Where ever you are using the values of the said objects, restrict the values which you don't want. After restricting, right click on that values and select Exclude from selection from the context menu.
It will not show those values in the report.
Hope this helps you...

How to update a Z d/b table record from report - urgent

Dear SDN Team Members,
I have created a ztable for list of all active customers.
This ztable has link with other SAP Standard D/b tables and I need to compare the entries with my ztable.
After doing so, I need to update a DATE field (called last_req_date) from the program.
Until now, i only worked on internal tables and update the fields in internal table. But this time I need to update my zTable and i've not updated any records of the database tables directly from the program.
Please kindly provide the complete syntax and procedure on how to update z database table.
Your help will be appreciated and points will be awarded for the same.
Thanks in Advance.
Best Regards!
Krishna.

Hi,
To update or Insert fields into teh dbase table.
INSERT INTO dbtab [CLIENT SPECIFIED] VALUES wa.
INSERT INTO (dbtabname) [CLIENT SPECIFIED] VALUES wa.
2. INSERT dbtab [CLIENT SPECIFIED] FROM TABLE itab. oder
INSERT (dbtabname) [CLIENT SPECIFIED] FROM TABLE itab.
3. INSERT dbtab [CLIENT SPECIFIED]. oder
INSERT *dbtab [CLIENT SPECIFIED]. oder
INSERT (dbtabname) [CLIENT SPECIFIED] ...
1.TABLES SCUSTOM.
SCUSTOM-ID        = '12400177'.
SCUSTOM-NAME      = 'Robinson'.
SCUSTOM-POSTCODE = '69542'.
SCUSTOM-CITY      = 'Heidelberg'.
SCUSTOM-CUSTTYPE = 'P'.
SCUSTOM-DISCOUNT = '003'.
SCUSTOM-TELEPHONE = '01234/56789'.
INSERT INTO SCUSTOM VALUES SCUSTOM.
2.TABLES SAIRPORT.
SAIRPORT-ID   = 'NEW'.
SAIRPORT-NAME = 'NEWPORT APT'.
INSERT SAIRPORT.
To UPDATE
TABLES SFLIGHT.
UPDATE SFLIGHT SET   SEATSOCC = SEATSOCC + 3
               WHERE CARRID   = 'LH'   AND
                     CONNID   = '0400' AND
                     FLDATE   = '19950228'.
TABLES SFLIGHT.
UPDATE SFLIGHT CLIENT SPECIFIED
               SET   SEATSOCC = SEATSOCC + 3
               WHERE MANDT    = '002' AND
               WHERE CARRID   = 'LH'   AND
                     CONNID   = '0400' AND
                     FLDATE   = '19950228'.
TABLES SCUSTOM.
SCUSTOM-ID       = '00017777'.
SCUSTOM-DISCOUNT = '003'.
UPDATE SCUSTOM.
OR UPDATE dbtab FROM TABLE itab.

How to delete the all records in Ztable from report program

Hi Guys,
Good Day!
How to delete all records in Ztable from report program(Means I want to clean Ztable records from report program) . Please send me the code.
Thanks & Regards,
Reddy

Use this.
DELETE { {FROM target [WHERE sql_cond]}
| {target FROM source} }.
*But before deleting the rows please check if this Ztable is being used in any other programs or used by others.
Check "where-used-list"
in se11 give the table name
utilities- where-used list.
I hope this helps.
thanks.

Stock Transport from plant to MRP Area

I have been looking for explanation on how to handle replenishment of MRP area storage location stocks within a plant. We use Special procurement types but they are set up on for plants, not MRP areas. Can anyone explain how this works and the configuration to make it work? Were setting up a warehouse as an MRP area and need to replenish its stocks with MRP.

Aren't your questions answered in SAP online help?
Integration
The process is the same as for Storage Location MRP. In contrast to the storage location MRP, you can use all MRP procedures and are not limited to the reorder point planning procedure.
Prerequisites
In Customizing for MRP, you have created the special procurement key for Stock transfer from plant to MRP area for the plant in which the MRP area is located. You have defined the following parameters:
- Procurement type: F for External procurement
- Special procurement: U for Stock transfer
- Plant: Number of plant, to which the MRP area belongs.
In the material master, you have created the MRP area segment and assigned the special procurement key Stock transfer from plant to MRP area.
Features
During MRP, the system generates a stock transfer reservation for the material in the MRP area and a material reservation in the plant MRP area.
The external procurement storage location that you have entered in the MRP area segment of the material master is used as the receiving storage location. If you have not maintained this field, the system uses the receiving storage location that you entered for the MRP area in Customizing.
The actual procurement is processed by the plant. With stock transfer to the MRP area, you carry out the transfer posting for the material with reference to the reservation.
Standard procurement key 45 is for that purpose: plant: 1000 (V460A-WERKS), procurement key F; special procurement: U; plant: 1000 (V460A-WRK02).
So, in both fields you have to write the same plant as it is clearly written in SAP onilne help.
As SAP help says: a Stock transfer reservation is created. Using MIGO (A08; R09) you can post the goods movement by mvt 311 with reference to the Stock transfer reservation (MB1A is also good).
Why don't you test in in your sandbox system and you will see how it works.
(If you want to use STO (purchasing document type UB) in this process you have to go trough OSS note 599915)
Edited by: Csaba Szommer on Jun 12, 2009 11:46 PM
Edited by: Csaba Szommer on Jun 12, 2009 11:48 PM
Edited by: Csaba Szommer on Jun 12, 2009 11:48 PM

Generate DTD from Report Writer

I am generating XML output from Report Writer and sending out to clients . Client wants the DTD of the XML or the XML schemas .
does anyone know how to generate them for my reports. I have lot of reports , so can we do them directly from Report Writer.

tahnk you for your help
while i tape
http://diabdev.siege.france3.fr:7781/reports/rwservlet?clapbudg&destype=cache&desformat=DELIMITEDDATA&mimetype=application/vnd.ms-excel&p_user=MOURAVA&report=INT_RET_RECETTE.rdf
i have an excel page whith this caractere
%PDF-1.4
1 0 obj
<<
/Creator (Oracle9iAS Reports Services)
/CreationDate (Tue Mar 22 01:22:09 PM 2005)
/Author (Oracle Reports)
/Producer (Oracle PDF driver)
/Title ()
>>
endobj
5 0 obj
<</Length 6 0 R
/Filter [ASCII85Decode /FlateDecode]
>>
stream
Gb!;f9lJcU&A@C2m*05F;>\ULD_so%11Ws"WO0pp5hs4F@(2#7keHTUHR[7CR)ir>"gJ%j^3MNH
bLtins-bZ6"2RR-A0;<n.L_[kN!GT1irf+F4O($erZVr-RM<ru@RUTej[I.,ZSuS1(M&rr,YO&3
Q_\o@hJI?/"b'"jU.Fkt8Fa_O/S=GW-,7@t[ker,.,kBr7Rk7]MSSfQpDF>a,ru[8D&)V,9#AKc
S)8Yt>,WYLf,LJPpkg9?8t+`SO/k#C`G*-(5nPO%n7l4N.#9^7]A+ifY:LV)BN^,9#bu8#DiaWg
+%c>)V2DMRH*5'5$+TWPk4-ou#7Ft6.O?V/n)pTl<191STHRoNKe1E>C=a<%h9^^2,R!AcO#MjS
T;8bH(F=(H==_"5r:Kp8kQ4m`;9n$'8$2Pk1\_2-eU1b&=aSb&Qnp/pKgF2\-(OQ,`l5N@N(e1H
0L8H-bb^W%53Gdaa^W5kOkfDh-&^kcEI5Jh(R"r=+p.O7,r0\Na)J_p.em;T1islEDAu)Me*iHb
&frZ[p=qa/4Br<^\2O^/$fU*>k^UIW`]6\X8[2JrM48\(X_iU;]=j8b_6:oY`Qq$3=(?/t?2E1j
CpDlqKo_504aRo^efH^V>O:\3f#Pd<Mk-s,qUcX$Z#BTp)#Tr/2i#>l*l.Qr"oCou.FoGrL1G/*
N<Qa@i:e26E.cmeT0IdMXLC,pH>)\%jCG$JVVXhs9l??VPMKZRc>tBIQ</hne-:\VEQD$7`_"c?
_\Hg0\rAYISMA\CUYDh/K7X7cMM$o=47MQaSA\V[F\#4"lYIRhW#>>p0Kjp1(c,1*!`^&$,n-de
BpBu]n^Um?H!-T$<`a!AXP_&;EZ9N'!+f2YGe`*O;SnpZGYi)H.^CPocD\Mu[`cIX]W[L*bR)fZ
4Z%@UFsJ\XdObk8R)&.ms$b1;Hk2P0\WfFQ+(Zn5.PBDNLQ!bpUtELBp0l*"W=fQEZV*gZ&=nMJ
[:qH@<$orqFVe]49j0_*Cp"%[]P3[T5'Smf,d[+4;MrKkXdY!:O&HnoWc;cp5#)]I=,g.X$#usN
NAKE,EE90u*Dus89ErgnK8&BMQ#&dc;PTpl+Nr#_BE`nQB]636*am=8ZKS]kV//K*<2%]+Fh%^q
m0`L-oqBV,-QeC)2rXR_H,S*\02i?.Cj8(\2nV!#JJ_A+Bsum<lYIj5<Ru7YbSo@X02n1qKU<Ll
=7p0rUa3]I[nsGj<6m!$EW.lY_Vbh!,%XLs`!hna(,J(&'TafJC(IP0TF5+0`MoF?2\aM=g_[#t

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

Need help on filtering out one record from a report and open in new page

Hi I am new and embarrassed to write in the forum asking silly questions. Thing is I am learning all from scratch without help from anyone. I have created a database (have previous knowledge only from Access) and have managed to create a beautiful report from a search filter. This report lines up several records matching what I needed. Now, I want to make the whole report with hyperlinks to a detailed page on each of the records in the report. I have tried using the feature where one can make one column hyperlinked and redirect to a new page, where I am getting all the records again - instead of only getting the record I am clicking on. I have looked and looked in the forums without finding solution and I have tested and tried various methods without luck. I am suspecting that I need some sort of knowledge on how to write a select query with where conditions that can apply to filtering out a record from one report to get another detailed on only one object (i.e. record). :/ Stupid or what?

Hrefna.
What you need to look into is two things:
1) The link you defined, needs to set additional attributes for the target page. In the "Column Link" box, you have set the link to "Page in this Application" and followed by the page number (let's say, Page 10). Below that, you should set an Item to an item on you target page (let's call that P10_PRODUCT_ID). This item should be the primary key of your detail table (on the targe page). You can select this item from the popup list. The Value of the item should be picked from a popup list as well, being the value from the record you clicked on. This should then transfer your selected item to your page. The URL will then have something like P10_PRODUCT_ID:5 at the end.
2) On the target page, 10, you must change the query slightly, so that it adds a WHERE clause:
WHERE PRODUCT_ID = :P10_PRODUCT_ID
Now, you should be set.
Hope this helps.
Borkur

How to count records from 2 tables and show in RDLC Report

hi all,
its being a one day searching for the solution but No Luck.
I have two SQL tables tblstudetail and tblfeereceiptdetail.
i just want to count records from both tables and show in RDLC report.
I tried SQl Query Like This:
select a.session, a.course,
Count(CASE a.ADstatus WHEN 'OK' THEN 1 ELSE 0 END ) AS Admission,
Count(CASE s .I_receiptstatus WHEN 'OK' THEN 1 ELSE 0 END) AS Feeprint
from
tblstudetail a
FULL join
tblfeereceiptdetail s on s.studentID = a.studentID
where a.session = '2015' AND s.Fsession = '2015' AND a.adcat = 'Regular'
GROUP BY a.session,a.course
ORDER by a.course
The result Show the Same Value in Both columns
Session    Course      Admission       FeeDetail
2015          B.A. I               275              275
2015          B.A. II              307             307
2015         B.A. III             255            255
2015          B.Sc. I             110             110
2015   B.Sc. II           105            105
2015          B.Sc. III            64               64
Actully I want to Count How many ADMISSION have been Taken(FROM tblstudetail) and How many FEE RECEIPT have been Print (From tblfeereceiptdetail).
please guide me for this as soon as possible.
thanks in advance...

I am counting 'OK' in both the table columns I.e 'ADstatus' in tblstudetail and 'feereceiptstatus' in tblfeereceiptdetail
please suggest me

Problem with deleting record from the report.

This is my first post here, just to let you know I just started playing with Apex.
Here we go:
I have a page with report where the link to the record I have changed with ULR to the javascript:
javascript:doDelete(#RECORD_ID#)
I have created javascript in the HTML Header of the page
<script>
function doDelete(id) {
if (confirm("Are you sure you want to delete selected record?"))
$x('P3_DEL_ID').value=id;
doSubmit('DELETE');
</script>
and finally created a process for the page On Submit - After Computations and Validations.
declare
var_id number := :p3_del_id;
begin
commit;
Delete from mytable where record_id = var_id;
commit;
end;
I don't get error messages but record is not deleted.
Thanks for help in advance.
Robert

Robert,
That's the problem. With that type selected, change the value in the textbox to just: DELETE
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
You can reward this reply by marking it as either Helpful or Correct ;-)

Apex report with details below for one record

Hi,
I'm looking for an answer to my problem:
We have a report with many columns ~60.
And is not very user friendly because it is so wide table.
If it is possible to display some less important columns like additional information below report,
for single record in report. E.g. user selects radio button from first column and details are refreshed for that record.
(if it is possible to group details in tabs)
Thank you for your answers.

Hi,
Here is one example
https://apex.oracle.com/pls/apex/apex/f?p=39006:41
Create hidden item that is not protected. In my case item name is P41_DEPTNO
First report query
select
APEX_ITEM.RADIOGROUP(1,DEPTNO,:P41_DEPTNO) AS rg,
EMPNO,
ENAME,
JOB,
MGR,
HIREDATE,
SAL,
COMM,
DEPTNO
FROM EMP
Second report query
select LOC,
DNAME,
DEPTNO
from DEPT
WHERE DEPTNO = :P41_DEPTNO
In second report region set Page Items to Submit your hidden item name.
Create dynamic action
- event: Change
- Selection Type: jQuery Selector
- jQuery selector: input[name=f01]
- Action: Set Value
- Set Type: JavaScript Expression
- JavaScript Expression: this.triggeringElement.value;
- Selection Type: Item(s)
- Item(s): <Your hidden item name>
Then add another true event to dynamic action
- Action: Refresh
- Selection Type: Region
- Region: <select second report region>
Regards,
Jari

Standard Extractor for Sales Overview report

Hi Experts,
Can you all please help me in finding the Standard Extractor for Sales Overview Report, fields like Product Group, Product, Net Sales, Billed Qty, Sales Plan, % Variance Plan etc are present in this report, i tried to search this in transaction RSA5 but wasnt able to find it. Also, if there is no std extractor then can you please provide me the name of the database table so that i can create a generic datasource on it.
Thanks & Regards,
Amit Naik

Hi Sathya,
I have received an initial Requirement from the Client (Please refer the list below), It gives us the Report Name & the fields involved in it, i need to tell them the feasibility, can you help me on this? Are there any std reports available for the same?
Report                          Possible fields
On Time Delivery-     Month to date on time in full, Year to date on time in full
Pick Performance-     Days from Pick List Receipt to Despatch
Delivery Performance-     Days from Order receipt to despatch
Costs-                          Total Cost per unit despatched,Labour Cost per unit despatched,Monthly spend vs budget by cost centre
Stocks-                          Openshaw Stock Volume vs budget,Openshaw Stock Value vs budget,Stock Movement by product / range month on month,Stock Turn
Returns-                          Volume and Value by major type
Orders in Pick-     Volume and Value
SMU-                          Outstanding Special Make Up Work
PI -                          Percentage bins 100% accurate
Space-                          Count of empty bin locations
Progress to Budget for month-     Budget, Forecast and latest estimate.,Invoiced to date, in pick, outstanding,Shortfall to find.
Profit and EBITDA-     By Brand / Customer / Account
Monthly pack     -                     Equivalent
Outstanding PO's-     Volume and Value, by brand / category,Expected receipts this week,View of inbound scheduler (Empirica)
Vendor Management-     Value of PO's with major vendors,Vendor on time delivery,Vendor Rejections / QC problems
In Bound Carriage-     Cost of Carriage for month vs budget,Airfreights agreed,PO's Inbound
Out of Stock Report-     Items where there is zero or projected to be zero stocks,Back Order volume value
Progress-                          Number of designs in development,Number of designs late against Critical Path
Thanks & Regards,
Amit Naik
Edited by: Amit Naik on Sep 20, 2010 9:28 AM
Edited by: Amit Naik on Sep 20, 2010 9:35 AM
Edited by: Amit Naik on Sep 20, 2010 9:38 AM
Edited by: Amit Naik on Sep 20, 2010 9:43 AM

How to select records from Interactive Reports based on checkboxes

Referring to the link below
http://apex.oracle.com/pls/otn/f?p=31517:95
I want to select rows from the Interactve Report based on a checkbox. This demo page has 2 sections, one for classic report and other for interactive one. The classic report is able to select the whole records but the interactive report selects only the emp nos. I am looking for a functionality where I can select the whole record from the interactive report.
Any pointers will be helpful.
Thanks

That is easy. You should just modify the query:
DECLARE
   v_count   INTEGER := 0;
BEGIN
   :p95_text_ir := NULL;
   FOR i IN 1 .. apex_application.g_f20.COUNT
   LOOP
      v_count := v_count + 1;
      FOR c IN (SELECT ename, job, mgr, sal, deptno
                  FROM emp
                 WHERE empno = apex_application.g_f20 (i))
      LOOP
         :p95_text_ir :=
               :p95_text_ir
            || 'ID: '
            || c.empno
            || ' / '
            || 'Name: '
            || c.ename
            || ' / '
            || 'Job: '
            || c.job
            || ' / '
            || 'Manager: '
            || c.mgr
            || ' / '
            || 'Salary: '
            || c.sal
            || ' / '
            || 'Department: '
            || c.deptno
            || CHR (10);
      END LOOP;
   END LOOP;
   :p95_text_ir := :p95_text_ir || ' / Records selected: ' || v_count;
END;Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Inconsistent records from report RMDMRPEXTRACT02 - MRP Extractor for LTP

Similar Messages

Maybe you are looking for