Incorrect Aperture listed in both Overview and Specs of the Canon EOS 7D at BB

Hi all,
I'm going to be buying this camera, so I was looking things over pretty closely.  I know that larger aperture lenses are generally more expensive and so was surprised that the cost difference for a body only 7D and a body with lens7D was only $200, especially since the lense in questioin supposedly has an aperture range of f/2.8-f/5.6.  When I enlarged the photo of the 7D, I saw quite clearly marked on the lens that the aperture was f/3.5-f/5.6. I would suggest that Best Buy gets their text changed before they have a bunch of angry customers on their hands.  I will still buy the camera with this lense, but I have to say I would have been very upset if I thought I was getting a 2.8 aperture lens and was delivered a 3.5 aperture one instead.

Hi Titania,
I have to say thanks for making us aware of this! You are correct that the specifications say the lens that comes with this camera body has a variable aperture of f/2.8-f/5.6, but the lens attached to the camera in the image shows that it has a variable aperture of f/3.5-f/5.6. Either the specifications listed are incorrect or the image doesn't show the lens that actually comes with this camera, and either way we need to update this listing to accurately represent what a customer would get with the purchase of this camera kit.
I have passed along this information to people here at Best Buy® Corporate that can get this update, and I fully expect this to be updated soon. Thanks again!
Thanks for posting,
Allan|Senior Social Media Specialist | Best Buy® Corporate
 Private Message

Similar Messages

  • Not option for Transport under the tab Change list in both IR and ID

    Hello All,
    The option transport is missing in tab change list for both IR and ID. We have created the track, maintained the systems in the NWDI but still no luck. We have also included the SC SAP-INTDIR 3.0 for both the tracks (i.e.) IR and ID. Also we are running a seperate NWDI server for CMS and the SLD is with the XI production server.
    Am I missing any configuration? Kindly suggest
    Regards,
    Anand

    Hi Anand
    Please check if the following link is of some good to you:
    http://help.sap.com/saphelp_nw70/helpdata/EN/45/f9f02cf3e41ecce10000000a1553f7/frameset.htm
    Also check for steps mentioned here:
    http://www.saptechies.com/minisap-610-installation/
    I hope it helps
    Regards
    Chen

  • Can we use both INSERT and UPDATE at the same time in JDBC Receiver

    Hi All,
    I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
    user send the file which contains both new and old record and I need to save those in MS SQL database.
    If the record exist then use UPDATE otherwise use INSERT.
    I looked on sdn but didn't find any blog which perform both the things at the same time.
    Interface Requirement
    FILE -
    > PI -
    > JDBC(INSERT & UPDATE)
    I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
    Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
    Thanks,

    Hi ,
              If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
    "If the record exist then use UPDATE otherwise use INSERT."
    Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ...  where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows  you proceed with "insert into tablename....." since there are no old records present in database.
      Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database.  A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
    http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
    http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
    [ This part you can ignore, Since its not sure that you will face this situation
        Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
    http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
    http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
    http://www.faqs.org/docs/ppbook/r27479.htm
    http://msdn.microsoft.com/en-US/library/ms187373.aspx
    http://msdn.microsoft.com/en-US/library/ms173763.aspx
    http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
    http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
    http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
        There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
    regards
    Anupam

  • How can I be certain the contact list in my iPod touch updates my computer Outlook contact list when I sync and not go the other way? The options in iTunes are not specific enough.

    How can I be certain the contact list in my iPod touch updates my computer Outlook contact list when I sync and not go the other way? The options in iTunes are not specific enough. In other words, I want to replace the information in my computer Outlook contact list with the data from my iPod touch. 

    How is your iPod configured to sync music from your iTunes library?  In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
    B-rock

  • I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells, find the 10 lowest numbers, then get the average and after that multiply it by .96

    I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells in a column,  find the 10 lowest numbers, then get the average and after that multiply it by .96  I used to use Excel and the formula worked fine in that. Here is my Formula
    =(average(small(H201:H220,{1,2,3,4,5,6,7,8,9,10})))*.96
    This formula worked in Excel and when I converted my spreadsheet over to Numbers, this formula no longer works.
    The best that I have been able to do so far is use small in 10 different cells, then get the average of the 10 cells and finally multiply that average by .96  So instead of using 1 cell, I'm using 12 cells to get my answer.
    This is a formula that I will be using all the time. The next cell would be =(average(small(H202:H221,{1,2,3,4,5,6,7,8,9,10})))*.96
    Hoping I explain myself well enough and that someone can help me.
    Thanks

    You can still do it in one cell but it will be more unruly than the Excel array formula.
    =average(small(H201:H220,1),small(H201:H220,2),small(H201:H220,3),...,small(H201:H220,10))*0.96
    where you would, of course, replace the "..." with the remaining six SMALL functions.

  • Can we install both PI and CE in the same instance ?

    Hi,
    I have requirement to use EAI and BPM tools in SAP, as i know the tools will be PI and CE, but then to reduce the total cost of the hardware we need to put both PI and CE into the same box. is that possible to install both application in the same instance to reduce total memory used ? because both system also using the same java stack the only different is the installed component.
    Please advise ?
    Thank You and Best Regards
    Fernand Lesmana

    Hi Fernand,
    is that possible to install both application in the same instance to reduce total memory used ?
    Yes, it is possible.
    Please advise ?
    Not advisable to have PI and CE on same instance. Might face problems as cited by Abhishek.
    Regards,
    Neetesh

  • HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

    I have Parallels installed with Windows 7.  Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

    You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

  • I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    Put your phone in DFU mode,
    Hold the Power Button (3 secs)
    Continue holding the power button and also hold the home button (15 secs)
    Release the power button while continuing to hold the home button (10 secs)
    Your device should prompt with the "Connect to iTunes Screen"
    Restore.

  • HT204053 I am unable to sync all contacts on my iMac (which includes outlook for Mac contacts) with my iPad mini, how do I do this, I have enabled icloud on both devices and ticked all the boxes.

    I am unable to sync all contact in my address book on my imac with my ipad mini, it looks like only icloud & yahoo contact sync leaving out the ones in outlook for mac.  I have enabled icloud on both devices and ticked all the boxes.

    Clive Owen wrote:
    Thanks for that, but my Outlook contacts are synced to and all in my mac contacts book, does this not meen they would go to icloud,
    No, they are in the On My Mac account in the Mac Contacts app, not iCloud.
    or are they in a different format despite being in mac contacts?  If so can the outlook contacts be exported in some other way to icloud?
    Outlook is not compatible with iCloud, check Microsofts site if you need more verification.
    If you want them in iCloud use Mac Contacts and move them from On My Mac to iCloud. This will remove them from Outlook.

  • Ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but fro

    ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase

    ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase

  • In imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

    in imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

    in imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

  • Can I setup my P1606dn to eprint both Mac and PC at the same time?

    Can I setup my P1606dn to eprint both Mac and PC at the same time?

    Hi Poindexter65,
    There is no setup involved to ePrint from a computer.  So, the answer is yes.  All you need to do in order to ePrint, is send an email (attaching whatever you wish to print) to the printer's email address.
    Here is a link with more information about ePrint and specifications for attachment types, file sizes, etc.:  https://h30495.www3.hp.com/help#eprint
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided.
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Can I use both cs and cc at the same time?

    Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

    Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
    Regards
    Kasper

  • Can I add a new page to both phone and desktop in the same respective location? Can this only be done manually?

    It appears that once you create your phone site, from that point on, when I add a new page to one layout or the other, the "Page/go to same" command struggles. Can I create a new page and have it automatically create a matching placeholder page on the alternate format/site plan?

    Hi
    To answer your query, I am afraid you cannot add a new page to both phone and desktop in the same respective location. You need to manually do the same.

  • I have two iMac's on the same desk. Once iMac pairs with both keyboards and mice.  The other pairs with the mouse, but I cannot get the keyboard to connect.  How do I get a keyboard and mouse to connect to each iMac independently?

    I have two iMac's on the same desk (about a foot apart). One iMac pairs with both keyboards and mice.  The other pairs with the mouse only; I cannot get the keyboard to connect.  How do I get a keyboard and mouse to connect to each iMac independently?

    Antaeus00 wrote:
    I tried sending a request for help,
    But did you succeeed in sending a request for help?
    Did you receive a response? How long has it been since you sent a request?
    but I need someone with more authority to talk to.
    There is no one with more authority than iTunes store support. We herem are only users.

Maybe you are looking for