Incorrect On Hand Quantities in MPS Workbench!!!

All,
We are opening an SR for this but I wanted to see if anyone knows anything about this problem:
We run MPS off of an MDS. We go into the MPS workbench to check the results.
We find that the On Hand Quantity used in MPS is TOO HIGH. It appears that it is counting quantities in reservations as on hand quantity!
For example:
Item A has 732 ea. On Hand in Inventory
Item A also has a RESERVATION of 509 to ship on a Sales Order today.
In the MPS Workbench, when we view on hand quantities, it shows 732 and 509 in the same subinventory, and a total nettable inventory of 1241.
That's clearly not right!!!
Has anyone seen this problem before or can anyone reccomend some action to fix?
Thanks,
Mark

Thanks for your reply ct.
But that still does not explain why double quantities are showing up in the On Hand in the MPS workbench. It is as if the reservation itself is showing up as a supply... or rather an on hand quantity.
Thanks,
--M.

Similar Messages

Update the on-hand quantities through Data Loader

Dear All,
I need to update the on-hand quantities of some number of Items (5000 items).
I hope I can do this with Data Loader, but which is the screen that I need to go and update the stock. Is the way, or any other alternate way that I can accomplish this stock update..
Please update...
many thanks in advance....

Hi Friend
Whenever you need to uploda the inventory, we use the Create Immediate Form in OA. Which consists of Reason Code/Item/Lot/WH/Qty for this you need to create DATA LOADER script which looks like below
Reason code Tab Item Tab Lot tab SB WH tab Qty save SB *NR
POST tab raw1 tab L101 tab sb W1 tab 150 save sb NR
ADD tab FG123 tab F101 tab *sb W2

How can we change the logo on the top right hand side of the Workbench

Hi
We have the system property to change the buylogoimage & selllogoimage on the top left hand side of the any page on esourcing.
However we dont have have any property for the top left hand logo images namely "SAP E-SOURCING & SAP E-SOURCING SUPPLIER PORTAL"
Our customer is looking for changing these images also.
I have created a file attachment container with the required customer image and have given the same path as properties of the image SAP E-SOURCING SUPPLIER PORTAL
However it is not replacing the existing image .
Is there another way to change this ?
regards
chetan

Please check Ankush's answer again. With a little extrapolation of his answer you can make the change.
I have changed both logos on the buyside of a system by changing:
Userinterface Property: buylogoimage to /images/logos/WOJNICKI.gif and
System Property: system.brand_logo.buyside to /images/logos/WOJNICKI.gif.
I think you are trying to change the system.brand_logo.buyside
I created a file attachement container:
Purpose: Resource Image
Path Name:/logos/WOJNICKI.gif
File Attachment: the gif file named WOJNICKI.gif that I created.
Keep in mind the the Path Name must be /logos/theninsertyourexactfilenamewithextension
So if you create your appropriate file attachment containers and place them in the following system properties (system.brand.brand_logo.buyside & system.brand.brand_logo..sellside) with the system user this should work.
Good Luck!

On hand Quantities Convesion

Hi All
Can anyone give me an idea about interface table&Import Pgm/API for "on hand quantity Conversion"?
Regards,
Suhasini

Using Material transactions interface (mtl_material_transactions table). You can find information in http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120scmapi.pdf (chapter 13).
Thanks
Nagamohan

Not able to do Pegging for both MPS & MRP Workbench

Hi Experts,
We have implemented SCP (Oracle EBS 11.5.10.2).
Loaded the forecast, then ran the MDS.
Also ran the MPS (for finished goods). Later opened the MPS workbench, cannot see items for pegging.
Please do the needful.
Thanks.

Chk the pegging attribute in the organization items screen (mrp/mps planning tab) for that item.

ASCp - Planner Workbench, PO in receicing order type record

Dear Friends,
In ASCP, Planner Workbench ,under a plan, supply and ddemand screen has an order type "PO in receicving" with firm flag enabled with future date for due dates
We could see all the PO's for that item is closed. On hand Quantities also got increased based on that PO receipts.
Can you please let me know, what does that mean by "PO in receicving" order type record and how for a closed PO's it is being shown?
Thanks,
Ganesh

Hi Ganesh,
The closed PO's should not be there and shouldn't have PO in Receiving status either.
But the reason why you must be seeing this is because there is still a record in MTL_SUPPLY for this PO with supply type code as RECEIVING and hence its still
appearing in ASCP.
Please go by the below article if the supply is still shown in RECEIVING but PO's are completed and run the mentioned queries to diagnose and get the inventory transaction fixed.
Fully Received / Delivered / Finally Closed Po Line Still Appearing in Item Supply / Demand Form MS and RS (Doc ID 1364291.1)
Moreover, if you started seeing this issue more often then the best way is to put the piece of code in the collections hook i.e MSC_CL_CLEANSE API to purge the supplies from ODS if PO's are closed for those.
Thanks,
Abhishek Sharma
Please mark the post correct or helpful, if answered

On-Hand check for related items in inventory

Hi All,
We have a generic item (item-A) and three different brands for the generic item (item B,item c,item d) defined in the system.The relation ship between generic item and brand items is also defined.I will have on-hand quantities for the brands and not for the generic item.
1.Is there any way we can show the sum of all brand's on-hand quantity as the on-hand quantity of the generic item using the standard functionality?
2.Can we use min-max planning for the generic item alone and later when the PR is automatically created we will decide which brand to buy in PO
Thanks,
Srihari
Edited by: user1159574 on Nov 9, 2010 5:49 AM

The answer to both your question is unfortunately No.
There is no seeded functionality to do that.
You will have to customize the onhand screen and the min-max process.
Hope this answers your question
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant

Incorrect Non-cumulative values in a Multi-Provider

Hi everyone,
I have created one Multi-Provider using Info-cubes 0IC_C03 & ZSD_C03.
The requirement was to get the "Invoice value" instead of the "Stock Issued Value" in 0IC_C03.
I have used the characteristics 0CALMONTH, 0CALDAY, 0MATERIAL, 0PLANT & 0SOURCESYSTEM in the MP.
However, when i execute a query based on the Multi-Provider, I notice that all Cumulative Key-Figures are showing correct Values, but the Non-Cumulative KFs (Val Stock Qty etc) are showing incorrect values (Large Quantities are displayed).
I am not sure why its happening? Please Help
Regards,
Srikar

Hi Ram,
Previously i was using a variable on 0CALMONTH for restricting the data which resulted in Incorrect NC values.
Later on, when I changed the Restriction based on 0CALDAY, the query was working fine.
Moreover I also included all the Characteristics present in the Validity Table of the Cube 0IC_C03 in the MP which i didn't initially.
I guess those two changes made the difference.
Regards,
Srikar

Projected on hand quantity calculation logic

Hi ,
I am trying to extract information for projected on hand quantities.
Here were my findings
1. MTL_SUPPLY_DEMAND_TEMP
this table has one column called ON_HAND_QUANTITY which stores Projected on hand quantity based on accumulating supply and Demand ( as per trm), However this table is a temporary table and data is also session specific, data will be gone once the session get closed.
2. From Inventory user guide I got a point that "The projected on hand quantity of the item is , defined as Current Available + all future sources of supply and - all future sources of demand."
Now my question is
a. Is there a direct table for calculating projected on hand quantity in application.
b. How do I calculate current available quantity then future source of suuply and future sources of demand.
Thanks in advance

Hi:
~ There is no direct table to get the projected inventory details.
~ Current on hand Qty for a given item shall be obtained from ON HAND QTY table.
For calculating the future supply upto a patricular date, all the expected supplies such as Receipts, Jobs, Internal SO transfer, etc to be considered.
For calculating the future demand, qty required for SO demand, forecast demand, ISO demand etc to be considered.
Projected Inventory = Current Stock (OHQ) + Expected Supply - Expected Demand.

Incorrect Inventory Values

HI,
I am using inventory cube. The issue i am facing is that I am getting correct stock levels - QUANTITIES be it current or past. But if I look into stock values of past they are current. But stock values of current are correct. Can anyone suggest what to do ???
Regards

Which content verion of 0IC_C03 are you using?
Content older that 3.3 (up to a certain servicepack level) contained an incorrect version of the cube where stock values where updated improperly on batch/storage location level. The value of valuated stock should be updated with stor loc/batch/stock type set to blank in update rules (if you keep to standard). If this isn't the case in your version of the cube then you would get incorrect values (not quantities) when looking at these characteristics.
// Christian

Inventory Transfer-show on hand by warehouse

Wondering if anyone has a workaround for this, without having to use SDK or DTW.
Customer wants to transfer inventory from WH A to B. When you tab in item field, you get a list of all the items in the database. We want to see only the items that are on Hand in the From WH (A in this example). The List of Items screen does not allow any options to filter this way. Since the databse has over 100,000 items, I don't want them all inserted and have to run formatted searches to find the on hand quantities and delete rows later.

Thanks for the reply. The formatted search option is fine but has limitations. I can create a select query to show the relevant items but when the FMS query shows the items, I cannot select multiple items. I have to do it one at a time in each row.
SELECT OITM.ItemCode, OITM.ItemName, OITW.OnHand from OITM OITM inner join OITW OITW on OITM.ItemCode = OITW.Itemcode where OITW.WhsCode = $[OWTR.Filler] AND OITW.OnHand > 0

Point In Time Journal in main report

I use the Dynamics GP v10 database. The system keeps item inventory on hand quantities based on initial on hand values that were in the item quantities table then keeps a journal of changes since that point in a table specific to the transactions. The transactions are based on locations.
IV00101 - Item master (Basic setup of the item and default location)
IV00102 - Item Quantities (Item quantities based on the totals for each location, not bins)
IV30300 - Item Transaction History Line Records (the item quantity transactions by line item and coorelating location).
Now, what I am doing in crystal is to select the correct transaction and location is below. Item number is a parameter. I additionally have the transaction date as a parameter as well.
{IV00102.LOCNCODE} = {IV00101.LOCNCODE} and
{IV30300.ITEMNMBR} = {?Item Number} and
not ({IV00101.ITEMTYPE} in [2, 4, 5, 6])
I have found that when the old consultants converted from the old database to Great Plains, for about 100 items they incorrectly set the initial on hand value held on IV00102. So when the system uses the journal in IV30300 to adjust the on hand value in IV00102, it is wrong unless I evaluate for what the wrong beginning balance is. What this means is that I can not use the journal itself to determine on hand. Now somewhere in the system it presents a balance which is the on hand, but I have not found anywhere in the system where a static beginning inventory balance number exists but that it rolls backwards or something. So that was a pain but now it is working so I can put in one item number and a date to determine the on hand at the time of an order at any given time in the past.
So that sets the stage. Here is the problem. I have to then use this in a main report where all sales line items are analyzed for on hand at time of sale. So each line item, up to 4000 or more per month. This takes a considerable time to process a journal history for every line item. Also, because I have to make this journal process a sub report to do analysis on the returned number I use variables to pass the number through to the main report. To make that work correctly, I have to run this at the group level because the sub report must run first to be passed to a variable and used for record level processing. But, that only works when I am looking at one day's worth of sales. If I am trying to process an entire month, it does not work as the sub report does not regenerate data for each record which has different dates.
So, comes down to this. Anyone know how to make the database itself create a view of all data and present a running balance for all items, which would require 1. resetting balance figures at each change of item number and 2. adjusting for improperly set begging On hand balance numbers.
If that is not possible, then how do I use the sub so it passes the data up for use in the active report on the line intended and not the line below?

Hi Allen, Great Plains is an OEM partner of ours so you should post/ask your question of them. They will know the DB and how to get to where you want to be.

On Schedule

Dear Members,
I am working on a report which has a column by name "On Schedule".
This report displays all Items and there on Hand Quantities. On Schedule means items currently on production.
How can we derive this value? I want On Schedule quantity for an Item.
Any Ideas
Thanks
Sandeep

On schedule may mean that it is on a MPS (Master Production Schedule) or MDS (Master Demand Schedule) on a work order.
For MPS or MDS, you can check the mrp_schedule_dates table.
For work order, you can check the wip_discrete_jobs table.
Hope this helps,
Sandeep Gandhi

Missing MDS Entry

Hi,
This is the cenario: I have created an MDS plan and have entered, manually, two entries for two different items (finished goods). These items have no on hand quantities.
A MRP plan, based on this MDS, was created too.
After having executed the MRP plan, all dependent demands and they respective supply suggestions appears normally, in the MRP workbench.
Unfortunatelly, both items entered in the MDS plan aren't appearing neither like supply nor demand in MRP workbench.
Did I missing something?
Thanks in advance,
Renato.

Hi,
We found the problem. There is a preference
parameter that rules the behavior of the Planner Workbench. The parameter is
Cutoff Date, reached through Material Planner/MRP/Workbench/Preferences,
tab Supply/Demand.
After changing the value to a later date, the Planner Workbench starts to show
the desired planned order.
Thanks for your time.

Open interface document - MTL_TRANSACTIONS_INTERFACE

Hi,
I'm looking for the open interface document related the MTL_TRANSACTIONS_INTERFACE (on hand quantities)
Regards

http://download.oracle.com/docs/cd/B40089_07/current/acrobat/120scmapi.pdf
Regards
Bilal SARIOZ

Incorrect On Hand Quantities in MPS Workbench!!!

Similar Messages

Maybe you are looking for