Not able to do Pegging for both MPS & MRP Workbench
Hi Experts,
We have implemented SCP (Oracle EBS 11.5.10.2).
Loaded the forecast, then ran the MDS.
Also ran the MPS (for finished goods). Later opened the MPS workbench, cannot see items for pegging.
Please do the needful.
Thanks.
Chk the pegging attribute in the organization items screen (mrp/mps planning tab) for that item.
Similar Messages
-
I cannot email photos from within iPhoto (v. 9.5.1). When I hit send I get a message: "Your email did not go through because the server did not reply." This happens for both my iCloud account and my Shaw account. What to do???
Are you able to email from Mail with those two accounts? If so:
1 - go to iPhoto's Accounts preference pane and delete both accounts. Now add them back and try again.
2 - a better solution IMO is to set Mail as the email client for iPhoto is iPhoto's General preference pane. This gives you better access to your contacts, a sent copy of all emails and, if you want a layout similar to iPhoto's, photo layouts located in Mail's stationary. -
Not able to create index for organization
in transaction ses_admin, i created an index for business object BAS_BUPA of type 1,ie individual account.
However, i am not able to create index for BAS_BUPA of type 2
It says "No entry in table SIC_INDEX_MAIN for index object BAS_BUPA and index 2"hi,
The index is for Business Partner, so it includes both Persons and Organizations. So, only one index needs to be created for both.
The functioning is correct, just that i missed it. -
Not able to do GR for STO delivery with packing.
Hi All,
Hi All,
I am not able to do GR for STO delivery.
I am getting the following error:
Data for creating a delivery is incomplete (Vendor)
Message no. M7279
Business scenario:
STO between two plants of same company code with packing material.
Sales Org(Supp)-4444
Sales Org(Rec)- 3333
Plant(Supp)-2003
Plant(Rec)-2002
ME21N->VL10B->PGI->VF01(Proforma)->MIGO w.r.t outbound delivery(error)
Note: PGI with packing material-separate line item generated for packing material-movement type for main material-641 and for packing material-601)
with regards
Azeez.MohdHi,
When the stock is going to be moved between two plants or two storage locations that are under single company code called as stock transfer order business process. Receiving plant raises the purchase order with supplying plant; supplying plant delivers the goods to the receiving plant by raising sales order.
Config Steps
Create Vendor: Transaction code: XK01
Assign Plant to Vendor
Go to change mode of Vendor [XK02]
Specify Vendor number that we created in the previous step
Define shipping data for plants
Create material by maintaining u201CPurchasingu201D view: Transaction code: MM01
Extend the material from XXXX to YYYY plants
As we are extending material from plant XXXX into YYYY plant, system copies all the data into the new plant.So that we have to change the delivering plant in delivering plant field as YYYY in Sales: Sales organization data 1 view.
Create Purchase order: Transaction code: ME21N
Activities due for Shipping (Purchase order fast display): Transaction code: VL10B
Display stock in transit: Transaction code: MB5T
Goods receipt: Transaction code: MIGO
Stock movement types: INTRAand INTER
INTRA
Stand order type (Document type) = UB
Delivery type = NL
Determination of document type:
Supplying plant + Receiving plant = UB
Supplying plant + UB = NL
Movement types:
Issuing plant Receiving plant
Single step 647 101
Two step 641 101
INTER
Standard order type (Document type) = NB
Delivery type = NLCC
Determination of document type:
Supplying plant + Receiving plant = NB
Supplying plant + NB = NLCC
Movement types:
Issuing plant Receiving plant
Single step 645 101
Two step 643 101
PBXX is the Gross price condition type for Stock Transfer Order
Vendor = Supplying plant
Customer = Receiving plant
NOTE: In single step method updations takes place in both plats simultaneously.
In two-step method updations should takes place manually. -
not able to install onedrive for business, keeps telling its already installed but its not (W7)
after a change of the 365 office version OneDrive for business it is not possible to reinstall the software
it keeps telling me it is already installed.
I think some settings are still there from the old install.
how can I remove them or force the reinstallyeah finally
Problem solved! , my tube is back to normal ( to rock )
all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
Regards,
evil_night13 -
Not able to put reason for rejection at sales order level.
Hi Gurus,
I have an issue where I am not able to put reason for rejection for line item in sales order. It gives error as please delete the follow on document purchase order line item number 10. I have already deleted the line item in purchase order. Then tried but did not work. Tried by deleting the purchase requision item also but it did not work.
Tried to undelete the item from PO and then again tried to put reason for rejection but it could no worked out.
Please guide me what can be the solution.
Regards
VinodAs far a I understand you created PO for line item
So first check whether GR is reversed or not for PO
Then mark this line item for deletion in PO and then in PR
Check if you have created any billing document for PO if so reversed that invoice
Also check if you have created any delivery for the Line item in sales order if yes then reversed the same
If you have Sales order related Billing, and if you have done billing reverse the same
If you have Delivery related Billing, and if you have done billing reverse the same
After reversing all docuemnts created for Sales order then only try to reject the line item
You can check table VBFA for document flow -
Not able to do GR for PO's , Delivery Completion Indicator Not Ticked
Hi ,
In SRM 5.0
Users Not able to do GR for PO's eventhough Delivery Completion Indicator Not Ticked , having Confirmation Roles
Either the PO is not appearing in the List or when they click the confirmation icon , the screen is not taking to the next screen to enter the quantity.
What all must be the probable reasons.
Thanks & Regards,Hello,
You can check following things,
1. User in the PO should be correctly assigned in org without any sync errors(check users_gen)
2. Check in PO if the Confirmation/services performed tick is assigned properly.
3. Check if the PO in SRM and backend is correctly synchorinzed with PO in Ordered status.
4. Finally if there is any existing confirmation for the PO, then they can create the next confirmation only after the earlier conf is synchronized with backend, which means it would depend upon your schedule of clean_reqreq_up report.
Regards,
Sanjeev -
My Iphone 5 headset is not working?Not able to hear sound (for eg:Music)
My Iphone 5 headset is not working?Not able to hear sound (for eg:Music)
Try disconnecting the headphones and then adjusting the volume, does it say headphones?
There might be something in the headphone jack, maybe lint, dirt, or something else in there.
Take a look at this Apple document for more information -> iPhone: Can't hear through the receiver or speakers -
TS1292 i have credit in my account but not able to redeem it for purchasing
I have credit in my account but not able to redeem it for ourchsing
I have credit in my account but not able to redeem it for ourchsing
-
Can't find my audio book -- Downloaded it from my public library to iTunes via Overdrive. It transferred to my old nano just fine but, even though it seemed to transfer to my new iPhone, I'm not able to locate it for playback.
Thank you. That solved the problem. So simple but it wasn't intuitive to me.
-
Not able to see published task and not able to reset version for the task
Hi,
Created a task ,validated,by selecting the task clicked Publish button in tools to publish the task.
In Client Application(Callcenter) navigated Administration-Business Process->Task Deployment
Here not able to see published task to activate.
Tried twice by copying record but not able to see.
I am not able to reset version for the task created.
Could you please let me know how to overcome these.
Using sample database of siebel8.0.0.5
Thank youHi Dude,
To trobleshoot this you need to do the following steps:
1) cross check in tools the srf which you are compling , the same srf should be used by the clent application i.e. call center
2) the secound thing is in the Siebel tools there is a toolbar at the top, from where you have published the task, there beside you will find a button called Revise you can revise you task, first select task and click revise button.
3) and also you remember a task which you create is validated by right clicking the task record and choose validate.
4) remember, a task which you create should be registered same as like responsibilities, by navigating to Administration-Applicatrion > Task
Register the task with same name as you have used in Siebel Tools.
As, for best practices after creating a task first validate it, then after register it in Administration-Applicatrion > Task , then after toolbar there is a button callled publish and activate click that one .
and that's All.
Regards,
Neeraj Verma -
Why I am not able to download application for free?
I want to download skypee, games, yahoo messenger in my iPad but I am not able to download it for free, which are free availble. Kindly guide me.
It would help if you would indicate how it's not working. Details are essential. What happens when you try to download a free app?
-
Not able to create request for multiple user in oim 11gr2
Hi,
I am trying to assign a resource to multiple user using oim identity console as System Administrator.
But when i am assigning the resource to multiple user its taking the same value for both the users.
Please let me know how to add the different value for different users.
ThanksThat's the rules of how it works. A request has 1 request form per resource for all users on the request. Those fields must all be marked as available in bulk as well to be viewed if you have more than 1 user on the request. If you need to provide different values based on the user, your best option is pre-populate adapters on the process form and use logic to populate the fields. You will not be able to manually provide different values during the request.
-Kevin -
Not able to find the source requirement of MRP RUN-(for planned order)
Dear All,
Actullay In MRP run system is generating 10000 qty in planned order but in MD61 there is only 3000 qty and no sales order requirement also exists for the same. And when i rerun the MRP by choosing option 3 in planning mode, then also it is generating the planned order for 10000 qty only but Iam not able find out the base requirement for that. Kindly suggest me the solutions.
Regards,
KrishnaHi
In MD04 at bottom, you can see a button for pegged requirement, click there you will come to know the list of requirement. It is not only because of Planned independent requirement you maintain in Md61, it could be due to lot size in Material master, or if you have fixed vendor in sourcelist then it could be because of Minimum order quantity with the vendor, or it could be safty stock or reorder point maintained in Material master
Regards
Antony -
Not able to access content for Mobile course
Hi Team,
I am trying to access content available for open SAP course for mobile Course: Introduction to Mobile Solution Development for the Enterprise
But once i click on a Video link, it directs me to this below page. Also not able to view any PDF.
Obviously, not even able to download.
Not sure if this is the right place to raise this question. So mentioning SCN Support
Regards,
JK
PS: I was able to view and download the contents before 12 hours.Hi Jitendra,
The hosting server for pdf's is not working at the moment and the server technical team is currently working on the issue.
You can still stream the videos but this might not be suitable for you at this time.
Apologies for any inconvenience caused. The technical team have advised us that this issue will be resolved shortly so please check back later.
Kind regards,
Claire
Maybe you are looking for
-
BADI/Exit to automatically populate Profit Center in MM41/42 for DC/Store
Hi All, In MM41/MM42, when u creating/changing an article, system should enter automatically the Profit Center as below: 1. Profit Center related to DC on Logistic DC page 2. Profit Center related to store on Logistic store page I have tried the BADI
-
Dear Experts, I have SAP PI 7.0 installed on HP-UX. I installed Guild FTP on my Windows Vista machine.Configured File to File scenario. Sender File adapter(FTP Transport Protocol)is able to process the 'input.xml' file placed in FTP INBOX folder. I w
-
USB doesn't work on my Macbook Pro
Hey guys ! So I very like taking pictures and stuffs.. so I decide to buy a Macbook Pro ( 10.7.5 ) to make my picture more beautiful But it's not turn easy like I thought. All the usb I tried didn't work on my macbook ! I don't know why but just my H
-
Wireless works for Toshiba but not IPAD
The wireless in my house via a linksys 2100L. My Toshiba netbook easily picks up the signal in my bedroom but my IPAD does not. The IPAD picks up the signal in the living room so it is not a configuration issue. Any suggestions? Thanks
-
Tcode j1ia101 for ARE1 internal document in background
Hi gurus, Can any body tell me BAPI or any FM to run tcode j1ia101 in background. regards manas