Incorrect result while pulling parent attribute member in FR 11.1.2.1

I am trying to pull a list of all the Cost Centers which are associated with a Division (Attribute Dimension).
Following is the hierarchy of attribute dimension
Division
DivA
Div001
Div002
DivB
Div003
If i used the level 0 member of attribute dimension (Eg. Div001) I get the correct result. However if I use the parent member (DivA) in the report I do get the correct results in the preview section but I do not get anything after running the report.
Similar report was working in 9.3.1. I have created the report from scratch by using a new connection but that didn't help either.
Would appreciate any help on this.

Hi Nishith,
Thanks for reply...
Yes. I tried returning codekey and hence in the UI the decode(Meaning) of the codekey got displayed. Its working only if return only ONE string.
But I wanted to return more than 1 string. So in the drop down more than 1 Group is displayed.
So, just gave a trail and error... tried returing List, String array and got an error saying "IAM-2050062 : The value of the attribute <Attribute Name> is not of the required type String"
Regards,
Praveen

Similar Messages

Oracle Discoverer report pulls incorrect result when scheduled.

Recently the database was migrated to 10.1.2 RAC from 9.2.0.6, so the discoverer EUL is now resides on new database.
after migration the report which pulls correct results when run interactively is pulling incorrect result when scheduled in Discoverer.
This report used sysdate and aggregate functions, i had ran the same report simultaneously( Directly in Discoverer Desktop/Plus and scheduled in discoverer), but the data retrieved in both case is not matching.
here is the query. any help is appreciated.
SELECT /*+ FIRST_ROWS */ A.SITE_ID as E175108,B."SYSTEM DESCRIPTION" as System_Prefix,
B."SYSTEM PREFIX" as System_Description,
COUNT(CASE WHEN ( TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE) ) < 0 THEN 1 ELSE TO_NUMBER(NULL) END) as Less_than_0_Days,
COUNT(CASE WHEN ( TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE) ) > 121 THEN 1 ELSE TO_NUMBER(NULL) END) as 0_to_14 Days,
COUNT(DECODE(TRUNC(( TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE) )/31),3,( TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE) ),to_number(NULL))) as 14_to_30_Days,
COUNT(DECODE(TRUNC(( TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE) )/31),2,( TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE) ),to_number(NULL))) as 31_to_60_Days,
COUNT(DECODE(TRUNC(( TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE) )/31),1,( TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE) ),to_number(NULL))) as 61_to_90_Days,
COUNT(CASE WHEN ( TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE) ) BETWEEN 15 AND 30 THEN 1 ELSE TO_NUMBER(NULL) END) as 91_to_120_Days,
COUNT(CASE WHEN ( TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE) ) BETWEEN 0 AND 14 THEN 1 ELSE TO_NUMBER(NULL) END) as 120_Days_Plus,
COUNT(TRUNC(SYSDATE)-DISCO10G.DATE_FORMAT_TEST(A.STATUS_DATE)) as Total
FROM PSTAGE.ALL_EQUIPMENT A,
( SELECT A.SITE "SYSTEM PREFIX", A.DESCRIPTION "SYSTEM DESCRIPTION", A.SITE_ID, B.SITE_DESCRIPTION, A.G2B_ID
FROM SITE_LIST A, ALL_CF_SITE_CONTROL B
WHERE A.SITE_ID = B.SITE_ID
ORDER BY 1, 3
) B
WHERE ( (B.SITE_ID = A.SITE_ID))
AND (A.EQUIPMENT_STATUS_CODE IN ('T','7'))
GROUP BY A.SITE_ID,B."SYSTEM DESCRIPTION",B."SYSTEM PREFIX"
ORDER BY B."SYSTEM DESCRIPTION" ASC ;
Thanks!

Hi sunil,
Rod is referencing the NLS parameters i.e.
Can you please let me know which NLS parameters you are referring toNLS parameters in this scenerio may be the date and language for that session.Do check out
SELECT * from NLS_SESSION_PARAMETERS
how i can check if there any differences in the NLS parameters when report is scheduled or run interactivelyI think you should run the trace file.Iam not sure about it.
It would be system_context.
Hope it helps you.
Kranthi.

Rp_provide_from_last returns incorrect result

Hi
When issuing rp_provide_from_last for IT2001, we get incorrect result.
rp-provide-from-last p2001 space '19000101' '99991231'
This macro does not return the latest record. Instead it returns the record with the highest subtype #. (It actually returns the last record shown in a SE16N listing of PA2001).
Has anyone seen this problem?
We are on SAP 4.7., SP 85.
Best regards
Kirsten

Pleas Try this
Usage:
Only in PNP database reports under GET PERNR, because the personnel number for which data is being read comes from field PERNR-PERNR, while the field being used is PNP-SW-AUTH-SKIPPED-RECORD.
(RP_READ_ALL_TIME_ITY beg end)
   DATA: BEGDA LIKE P2001-BEGDA, ENDDA LIKE P2001-ENDDA.
   INFOTYPES: 0000, 0001, 0002, ...
                     2001 MODE N, 2002 MODE N, ...
     GET PERNR.
   BEGDA = '19900101'. ENDDA = '19900131'.
   RP_READ_ALL_TIME_ITY BEGDA ENDDA.
   IF PNP-SW-AUTH-SKIPPED-RECORD NE '0'.
      WRITE: / 'Authorization for time data missing'.
      WRITE: / 'for personnel number', PERNR-PERNR. REJECT.
   ENDIF.
Remarks
This RMAC module can be used when, for example, the time infotypes were originally defined in MODE N. This was done because the time data (from LOW-DATE to HIGH-DATE) might not all have fitted into the buffer. Now, however, they are read with shorter intervals (for example, in RPCALCx0 with payroll periods).
-Due to the large amount of data in HR, the infotypes 2000 u2013 2999 should not be read when GET PERNR occurs. Therefore, these infotypes are declared with the enhancement MODE N.
-As a result, the infotype tables under GET PERNR are not filled. The time infotype tables are filled subsequently using the macro RP_READ_ALL_TIME_ITY, but only for the time interval specified by PN-BEGDA and PN-ENDDA.
http://help.sap.com/saphelp_45b/helpdata/en/60/d8bb88576311d189270000e8322f96/content.htm
Best Regards

Incorrect result between maintain master data and bex query, how can i fix?

Hi ALL,
i get some messages from the users there is incorrect result between SAP R/3 and Report on BW. i controlled the monitor and i saw there was a job for 0CUSTOMER_ATTRIBUTE that it finish correctly but the processing it was only in PSA, i started the full update immediately from PSA into Data Targets and is finished correctly. after when i control the content of the 0CUSTOMER (right click maintain master data) i get the correct attribute result that match the data in SAP R/3, but the problem is when i execute a query Bex on this master data it will not return the same attributes data.
Can SomeBody Help please
Bilal

hi,
For any master data attributes loaded you will have to run "Attributes Change Run" for that.Execute for Master data 0CUSTOMER.
The same is avilable in rsa1->Tools(top menu)->apply hierarchy/attribute run.
hope it helps,
regards,
Parth.

Furmula displaying incorrect result at Hierarchy Node level

Hi Experts,
I have created query which is using simple formula as Amount = Price * Quantity.
The query is using hierarchy on Material.
When I drill down to the lowesr level (leaf node) the formula is showing correct result.
But at all the node levels its displaying incorrect result.
Ex.
Mataterial 1 Rate = 4 Quantity = 10
Maaterial 2   Rate = 3 Quantity = 10
In hierarchy both the se materials are under same node (Parent node) say Node 1
The query output is
Material                Amount
Node 1                140   (7 * 20)
    Material 1          40   (4 * 10)
    Material 2          30   (3 * 10)
It should be
Material                Amount
Node 1                 70
    Material 1         40
    Material 2         30
Please suggest how can this be achieved.
Regards
SSS

Hi SSS,
Have you ben able to resolve this?? I am also facing the same issue..If you have resolved pls reply.
Regards,
Tapan

Error while pulling sales history into planning area

Hi Folks,
We got error while pulling the sales history data into planning area from infocube.
We uploaded CVC into MPOS.
Please find the below error.
""Combinationens of infocube are not contained in BasisPlobStru""
Message no:/SAPAPO/MSDP_REL106
Thanks
Sri

Hi,
The issue is that The Characteristic Combination is present in MPOS as well as in the list cube.While Uploading sales from the list cube result is that for some months Sales is matching exactly where as for some months data is not showing in the planning area though sales is present in list cube for the same month.I have run Consistency checks for Time series also.
Thanks
sri

Exception while querying ExalogicOptimizationsEnabled Attribute

Recently switched from JDeveloper 11.1.1.6.0 RC2 on Windows to the same on Linux. Now, after opening our App, the "Messages - Log" console in JDeveloper displays this warning multiple times:
WARNING: Exception while querying ExalogicOptimizationsEnabled Attribute
Dec 8, 2011 9:17:21 AM oracle.adf.share.ADFContext isHighPerformanceEnvEnabled
I end up seeing this many, many times in the course of a development session. I'd like to find and solve the problem. Anyone know where to look?

Hi John,
Thanks for your reply. Other than a lack of Google search results, I don't have any indication this error is unique to unreleased versions. This forum is used by Oracle employees as well as the public, so isn't it worth asking to cover the bases?
- Mark

Error while pulling data from an Oracle database. ORA-01858: a non-numeric character was found where a numeric was expected

I'm trying to pull data from an Oracle database using SSIS. When I try to select a few fields from the source table, it returns the following error message:
    [OLE DB Source [47]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
    An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
    An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
The source columns are a combination of numeric and texts, and I've also tried selecting one of them, which didn't work. I'm using the Oracle client 11.2.0.1, and it works fine with any other data sources I have connected to so far. How can I resolve this
error?

Hi H.James,
According to your description, the issue is a non-numeric character was found where a numeric was expected while pulling data from an Oracle database in SSIS.
Based on the error message, the issue should be you are comparing a number column to a non-number column in a query. Such as the query below (ConfID is a number, Sdate is a date):
where C.ConfID in (select C.Sdate
                   from Conference_C C
                   where C.Sdate < '1-July-12')
Besides, a default behavior for the Oracle OleDb Provider that change the NLS Date Format of the session to 'YYYY-MM-DD HH24:MI:SS can also cause the issue. For more details about this issue, please refer to the following blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/01/20/every-bug-is-a-microsoft-bug-until-proven-otherwise.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

BEx Query Providing Incorrect Results

I have two BEx queries that are behaving strangely.
They are providing incorrect results and I can't figure out why.
In both cases, when I save query in development under a different technical name the problem disappear.   I can't use this as a permanent solution because users insert queries in workbooks and we have portal links.
Is there a way to somehow fix these queries that
are acting strangely.
Query 1:
When run query get error message
"No roll storage space of length 120 available fro OCCURS area"
Query2:   Calculates Wrong Average
When run query:
Adding Cumulative Qty Customer Balance + Quantity Customer Movement
together.
Set Aggregation to Average
ref char Posting Period.
The avearge BEx calculates only considers Cummulative Quantity
End Customer Balance. It should consider consider Quantity Customer Movement as well.
Avg formula : ((Jan End - (.5* Jan Mov) ) + (Feb End - (.5* Feb Mov))+   (Mar End -(.5* March Mov)))/3
I have used the same methodology to calculate average with other queries and it average calculates correctly. These other queries have same InfoProvider and using the same dimensions as queries that are calculating average incorrectly.

Hi Mti
Thank you for your reply.
I have checked the details as per your suggestion:
1. KF Aggreagtion tab on Workbench Exception Aggregation is on SUM Summation.
2. RKF on The Query is on (Nothing Defined).
Is there anything else that can be checked?
Thank you

How to tag attribute member with standard dimension member in EIS

hi,
would any one please help me how to tag attribute member with standard dimension member in EIS
THANK U IN ADVANCE

In your OLAP model, view columns for the base dimension table. Go into the column properties and for the columns that have Attribute values highlight them and click the Attribute button.
Go into Metadata Model and those fields will be available to drag into your outline as attribute members.
Once in the outline, go into the properties of the attribute and assign the level of the base dimension they associate with.

Attribute member datatype is not matching in Essbase Studio

Hi All,
When I was trying to build the ASO cube by adding attributes it throwing below error
Failed to deploy Essbase cube.
Caused by: Cannot end incremental build. Essbase Error(1007083): Dimension build failed. Error code [-1]. Check the server log file and the dimension build error file for possible additional info.
\\Outline verification errors:
\\Attribute member datatype is not matching with Attribute dimensions datatype.
\\Illegal datatype for attribute member
\\Attribute member (Name) datatype is not matching with Attribute dimensions datatype.
\\Illegal datatype for attribute member Name
Here every thing is "String only" and i verified in backend it will show ing datatype as "Varchar".
Can someone assit me how to resolve this error.Thanks in Advance
Regards,
SatyaB

Did you tried CASTing your source data to match it attribute dimension type? Just CAST all source data before its loaded and it should help resolve any data mismatch type errors.
I think I have an integration where we use VARCHAR2 type data mapped to string dimension.

Persistance of the Parent attribute

Hi - I have a 8 applications (appxxx.ear)in OC4J (9.0.3) and uses the parent attribute between them.
However - redeployment of .ear file with Enterprise Manager removes the parent attribute and changes the sequence of applications in server.xml
How do I keep this attribute without re-applying it everytime after redeployment.

See what happens when ya don't read the spec's backing the API's ya use? I haven't read that spec in over 2 years, and apparently it didn't jump out at me at that time as importand and/or major. Guess it all depends on what you're looking for when you read something.
Thanks for the quick help; I'm off to implement my own personal version...erm...vision of versioning...um...anyway, back to it.
Thanks again!
-dSn

Query with Cost Center Hierarchy giving incorrect results

Hi All,
I have a universe built based on BEx query on Cost Center cubes. When enabling hierarchy in BEx Query and building Web intelligence Report based on the universe, I get incorrect results. The levels of the hierarchy is incorrect, many of the cost centers are missing etc. I checked the universe and confirmed that all levels of hierarchy are generated correctly. The Lov generated for these levels are correct and I see the complete hierarchy when using the BEx Variable in Universe for filtering.
I tried the same query with Hierarchy disabled with a different universe and it is providing correct results. Not sure what I'm missing here. Any inputs regarding this is appreciated.
Thanks & Regards,
Sree

Ingo, Thanks for your suggestion. Of course, I did update the Universe after any changes in the query. Tried different query setting related to hierarchy to make it work, but didn't many any difference and I get consistently incorrect results.
One thing what I wanted to confirm is, if there is any known bug in SP 2 Fix Pack 2.7 related to hierarchies. If not, it might be me doing some thing wrong and I will look into in more detail.
Thanks & Regards,
Sree

Incorrect result set with using isnull() function in IQ 16

Hi team,
We have IQ 16 on HP UX.
When we use isnull() function in where clause we get incorrect result set if we do not use column name in the result set.
In first select we get result with one row but in second one we get an empty result set.
select ID, dat_start, dat_end, dat_stop
from table_test
where ID=1105935925
and isnull(dat_stop,dat_start) <> dat_end
select ID
from table_test
where ID=1105935925
and isnull(dat_stop,dat_start) <> dat_end
It depends on number of row or volume of data in table, It is possible to use option Revert_To_V15_Optimizer to get the correct result.
Do you have any different idea how to solve it?
Thanks Milos.

We have tested two versions:
Sybase IQ/16.0.0.653/131122/P/sp03/ITANIUM/HP-UXi 11.31/64bit/2013-11-22 01:49:18
SAP IQ/16.0.0.807/140507/P/sp08/ITANIUM/HP-UXi 11.31/64bit/2014-05-07 21:11:45
Both versions have given same mistake.
We have not opened any support case for this issue because it is data depended issue. It is not easy to simulate it as an example.
Do you think we should open a support case for it?
Miloš

Subtracting two numbers in double format gives incorrect result

Hello,
I have a table with two fields in Number (Field Size: Double; Decimal Places: Auto). When using a query i try to subtract one field from the other I get incorrect results:
Field1
Field2
Result
2.60299223923846
2.60259423701324
3.98002225218796E-04
0.644498511499839
0.645908903902985
-1.41039240314556E-03
1.51021791504783
1.51372591514976
-3.50800010193808E-03
<tfoot></tfoot>
When I paste the above into Excel, I get the correct results:
Field1
Field2
Result
2.60299223923846
2.60259423701324
                     0.00039800222521880
0.64449851149984
0.64590890390299
                   (0.00141039240314556)
1.51021791504783
1.51372591514976
                   (0.00350800010193808)
Would much appriciate any help in how to get the correct values in Access Query.
Thank you

Field1
Field2
Result
2.60299223923846
2.60259423701324
3.98002225218796E-04
0.644498511499839
0.645908903902985
-1.41039240314556E-03
1.51021791504783
1.51372591514976
-3.50800010193808E-03
Hi Vasilii,
In my opinion the results are correct, only they are presented in scientific notation. You can do some formatting, to display the results the way you want.
See the Help on the use of Format.
Imb.

Incorrect result while pulling parent attribute member in FR 11.1.2.1

Similar Messages

Maybe you are looking for