Incorrect sequence of shop floor paper after upgrade

Hi All,
We had an upgrade from 4.7 to ECC6 and we have a problem with shop paper printing for Production orders. The sequence of shop papers doesn't follow the sequence defined in configuration. e.g. Pick List gets printed before Operation list even though the configuration is otherwise.
What could be the possible reasons and solutions for such an issue?
Regards,
Jibitesh

All configurations are maintained properly in OPK8. The print program has been changed to SAPSprint.
Possible reasons or troubleshooting tips would be helpful.
Jibitesh

Similar Messages

Shop floor paper printing

Hi Team,
I am new to use the transaction OPK8. I need to configure to print production order details for shop floor paper printing.
How to use this transaction to print shop floor papers as per our requirement?
I need to print some BOM component details and kanban control cycle informations (eg: storage bin) in the shop floor papers. Is these informations available by default in OPK8 transaction?
I am beginner to use this transaction. So your valuable guidenace required.
Thanks
psk

Hi chandan
Priniting layout can be set on your for printing shop floor paper. The required field can be set from production.
Regards
J . Saravan

Production Schedule Profile & shop floor paper printing.....

Hi there ,
If we set the Execute Printing checkbox in the T-code <b>CORY</b>for a production scehedule profile....... then when we will release the order along with the other shop floor paper do the Transfer Order will also get printed if the material is warehouse managed.........
Please enlighten me .....
Thanks & Regards
Kaushik

Hi there ,
Thanks for your reply...... I am aware of the fact that the shop floor paper will be printed once the order is relased & the relevant config is done in the Production schedule Profile.........
But in case of the material which are warehouse managed the Transfer requirement will be created & the further the Transfer Order........... I wan tto know that these will also Print the Transfer Order doucment for the warehouse managed material .......
Thanks & Regards
Kaushik

What is shop floor paper ?

Hi,
Can someone explain in simple statement what is meant by a Shop floor paper in PP module ? An abaper is expected to change its layout and users can print it. Which programs are involved in sapscript ? What kind of changes are normally expected in the shop floor layout ?Thru which transaction I can print and verify the shop floor papers (like PO thru ME21N).
Would highly appreciate if u can answer straight rather than sending me links.
thanks

http://www.sap.com/industries/chemicals/pdf/BWP_SB_Manufacturing_Intelligence_Dashboards.pdf
http://www.honeycombconnect.com/downloads/PILS/OTE/13_12_06WhitePaper.pdf
Regards.

Status updation of Shop floor paper

Hi expert
I have created one Shop floor printout in Smart forms.i have created my own program.In the statndard printout
status will be changed to PRT when the print out taken.I want to in coperate this feature in my program also.
Please guide me
Regards
Manoj

All configurations are maintained properly in OPK8. The print program has been changed to SAPSprint.
Possible reasons or troubleshooting tips would be helpful.
Jibitesh

Incorrect Permissions on Some /dev/ Nodes After Upgrade on OpenVZ

This is a duplicate of the issue in https://bbs.archlinux.org/viewtopic.php?id=142816 , but it was marked solved, so I assume any responses to it get ignored.
Mister_Magotchi wrote:
I'm having the same issue as the OP, but as falconindy said, the fix used isn't really proper.
I'm using a VPS (OpenVZ), and the same happened to me after updating today (many parts of /dev lost the proper permissions, including null, zero, full, random, and urandom). I also don't have any files in /etc/udev/rules.d (although /usr/lib/udev/rules.d has a bunch of stuff).
Could someone please help point me in the right direction on finding the culprit for the change in permissions?
Also, the problem exists on two different VPS, but on a physical server I also run, the permissions are correct.
Any ideas would be appreciated. I'm still struggling with this.

I talkt with falconindy, because i got the same problem so there is the fix (workaround). I know falconindy don't like override permission by udev, but maybe OpenVZ Container need this. If i had time, maybe i will look deeper in it.
Problem was upgrade from udev v182-4 to systemd-tools v184-2, because of removing the following line.
cat /etc/udev/rules.d/50-fix-permission.rules
# Thomas Lucke (Lucky) [email protected]
# In a OpenVZ container with enabled udev (systemd-tools), you run in some
# permission problems, because the udev rule was removed by this commit:
# http://cgit.freedesktop.org/systemd/systemd/commit/rules/50-udev-default.rules?id=378f2e074e38490103f999173bf717a5394170f8
# mem
SUBSYSTEM=="mem", KERNEL=="null|zero|full|random|urandom", MODE="0666"
btw. please post there if you get problems, because i don't follow the forum.
https://aur.archlinux.org/packages.php?ID=57949

Incorrect characters in material PO text after upgrade

Hi there,
We have just upgraded from 4.6c to ECC 6.0 and have a problem with invalid characters on material PO text.
On the material master there is a long text description with the character "-". in ECC 6.0, these have been replaced with the character "?" or "#". Also, there are entries such as "" and "

" included at the end of lines.
If you manually change the text via MM02, there is no problem, it saves the correct character.
Does anyone have any ideas what may be causing this?
thanks
Donal

Check the config in Materials Management --> Purchasing --> Purch Req --> Texts for Purch Reqs --> Define copying rules.
For your text, see the linkage with Material PO text. The fix indicator will be N. This means you cannot change it in PR. Change the config setting to blank and you will be able to change it in PR.
Hope this resolves,
Lakshman

HT4628 hi has anyone else considered going back to pen and paper after upgrading their imac to lion? i miss the internet connection that i pay for

In our house we have lots of Apple products and they all conect to our wireless no problems. My imac used to until I upgraded to lion and now it is almost useless. I have updated software and tested my wireless connectivity which is fine with other devices, am I missing something or should I be compensated for the time wasted trying to work!

How to revert your Mac to Snow Leopard
Be happy.

Shop floor Printing

I have made print setting in opk8 and it is working fine with one material , one order typeand one production order, where I can see preview of shop floor paper.
But when i make production order with same material , order type and same plant. Then iam not able to get print privew (when i press print option in menu FUNCTION.
I get message After the next update the order will be printed.

In my question , I hav mentioned that for same plant, same material, same and same order type, for one production order I can view print preview in CO02, co04 serveral times
But for other prodcution order, for same plant, same material, same and same order type iam not able to see print preview in co02 or co04. In that case, everytime i get message -After the next update the order will be printed

Shop floor with w/o no in PM module

Hi All,
Can you please explain me in understanding the **standard functionality** of Shop floor paper with W/O# in PM module.If possible please share document.
Regards,
Meghana

I guess, you are looking for smart forms which can be prepared from Maintenance order.
First in IMG, we need to define the shop papers which are going to be used for the order.
IMG => PM & CS => Maintenance & service processing => Maintenance & service orders => Print control
Under that, you can define the shop papers. Also custom shop papers can be added in that list.
Apart from that, based on order type, shop papers can be restricted. Based on user as well, shop paper can be restricted.
http://help.sap.com/saphelp_sm32/helpdata/en/32/da2e88713c11d58cd90000e8284931/frameset.htm

Task sequence fails after upgrading to 2012 R2 and MDT 2013

After upgrading to 2012 R2, my task sequence fails after the Setup Windows and ConfigMGR & Restart Computer. Instead of continuing to run the task sequence and load up the MDT Toolkit Package, it just stops at the Windows 7 login screen.
Do I need to create new toolkit & settings packages with MDT 2013 settings? Or do I just need to create a new task sequence?
I can't figure out what log to look at on the VM that I am imaging. If someone can point it out maybe there's some useful information. Thanks.
My task sequence

It sounds a lot like that it could be failing at the client installation. Please take a look at the client installation logs.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Here are the log files from c:\windows\ccmsetup\logs .. I took a glance and things run with success 0 which should mean no error right? The system also has the client installed with the CU2 patch.
Client Logs
Searched a bit online and people are saying it's due to the incorrect boot image. I was using a WinPE 5.0 I created on this TS but I'm going to make another and see where it goes.
This was the solution.

Access Sequence JEXC missing after upgrade to EHP7

Dear Experts,
we are facing an error while saving excise invoice through transaction J1IIN in development system after upgrade to EHP 7, Access sequence JEXC missing ( ) Message no. VE306, could you please suggest to find out solution.
Regards,
Amit Anasane

Dear All,
Thanks for helping with your valuable suggestions, finally i got solution of it,
The root cause of this problem was the change in the table T682I by theEHP7 upgrade.The fields KOTABNR has been changed from NUMC(3) to CHAR(3).With NUMC type the wrong statement works anyway.With CHAR type it retrieves no records. thus creating this error message, so it was a pure ABAP programming error. i am closing this discussion once again thanks to all.
Regards,
Amit Anasane

Finding: Incorrect SQL throws a random error (after 2005 upgrade)

Hi I thought that I would share an experience that we found after upgrading a system to 2005:
Due to the upgrade of SBO, one of our addons didn't work properly after upgrading it to 2005. Basically the code would break in random places (while stepping through it in the Development Environment).
After some time we identified the error was being thrown because a sql query we were using was incorrect due to the changing of the DB structure in the upgrade. The weird thing was that it didn't throw an error at rs.DoQuery(query) but actually would step into the recordset and then the addon would suddenly stop working - hence the reason it took a while to identify it was the sql causing the problem.
Anyway updating the sql fixed the problem, but if anyone else is finding strange behavior whilst trying to identify why an addon might stop working after an upgrade, you should check any sql being used is still correct....
Daniel

The first versions of SBO2005A SDK (PL00 to PL04) was the say the least VERY buggy... PL05,06 and now 07 seem to get things under control... Any rampup version of 2005 should at least get up PL05 ASAP... I didnt have many problem with the SQL, but "Server produced an error was a very common error".. my problem was primarily in matrixes (add/remove of lines), itemevent (pval internal COM error) and the dangerouse UserTable error due to currupted object in it....

After upgrading to elements 12 the metadata shows incorrect date created?

After upgrading from elements 8 to 12 all the pictures in the album have a new date created in the metadata the is the date I upgraded. this is incorrect because the picture was not created on this date but moved or updated. This is a problem when running things like screen savers that go by date created. How do I fix the metadata to reflect the actual date the picture was created?

After upgrading from elements 8 to 12 all the pictures in the album have a new date created in the metadata the is the date I upgraded. this is incorrect because the picture was not created on this date but moved or updated. This is a problem when running things like screen savers that go by date created. How do I fix the metadata to reflect the actual date the picture was created?

Task Sequence packages not installing after upgrade to R2

Hi all
As the title suggests, I've upgraded my SCCM 2012 server from SP1 to R2. The OSD Task Sequences reach the stage where the client is installed, and ends after this point. However there are several software packages after this step that it is seemingly skipping
entirely now.
Any idea why this might be?
Thanks

Ok,
After banging my head for a few days with that issue i saw the light at the end of the tunnel ( an not the
train) today.
Long story short, the culprit was the boot image. I upgraded to 6.3 and everything in my TSs is working as
it should.
Here are the details:
The recall my issue, after upgrading SCCM from SP1 to R2, none of the software packages were getting installed
in a Task sequence. A TS runs up to the installation of the SCCM agent and then it quits.
Looking at the log file in C:\Windows\System32\ccm\logs\smstslog I found the following errors:
Resuming Task Sequence in Full OS TSMBootstrap
Failed to get the environment key. TSMBootstrap
Failed to resume task sequence (0x800700EA).
Exiting with return code 0x800700EA TSMBootstrap
Earlier i mentioned that my boot images did not get updated as part of the site upgraded, so i went and updated
them to version 6.3 and after making sure it got deployed in a TS to make it available through PXE, my problem was gone.
this post helped me tremendously to realized that the boot image was the issue:
https://social.technet.microsoft.com/Forums/en-US/a793071d-1a3b-4b68-b6de-6d8c1a1fda0f/failed-to-get-the-environment-key-smstslog?forum=configmanagerosd
Mario.

Incorrect sequence of shop floor paper after upgrade

Similar Messages

Maybe you are looking for