Shop floor with w/o no in PM module
Hi All,
Can you please explain me in understanding the **standard functionality** of Shop floor paper with W/O# in PM module.If possible please share document.
Regards,
Meghana
I guess, you are looking for smart forms which can be prepared from Maintenance order.
First in IMG, we need to define the shop papers which are going to be used for the order.
IMG => PM & CS => Maintenance & service processing => Maintenance & service orders => Print control
Under that, you can define the shop papers. Also custom shop papers can be added in that list.
Apart from that, based on order type, shop papers can be restricted. Based on user as well, shop paper can be restricted.
http://help.sap.com/saphelp_sm32/helpdata/en/32/da2e88713c11d58cd90000e8284931/frameset.htm
Similar Messages
-
Capabillities of xMII with respect to TIBCO in integrating shop floor
Can any one tell capabilities of xMII in comparision with TIBCO with respect to shop floor integration and KPI generation . which is better.
First off, Like Ryan I too am bias towards xMII. Secondly I don't know that much about TIBCO, but here are some questions you ask in order to compare xMII with TIBCO:
1.) xMII is a very good data aggregate where you the customer determines what you need and how to use it. Does TIBCO have this functionality? Your applications come first in xMII, the functionality is not limited to just a set of canned KPIs, you can quickly and easily add new KPIs dependant on your needs.
2.) Shop floor connectivity is critical, Does TIBCO have the connectivity that xMII offers?
3.) xMII has great performance and is light weight. Unlike most 'Enterprise Level' application platforms, SAP xMII considers real-time to be in the order of seconds to minutes, not days or weeks. The largest overhead in an xMII installation (minus any other SAP systems) is NetWeaver.
Try to figure out you scenario, find all the business requirements you need, then check out xMII's abilities vs TIBCO. I think you'll agree that xMII can handle what ever TIBCO offers and most likely even more.
Martin. -
Open item in PS reporting for shop floor order (same as PO's or PR's)
Hi Guys,
I have a question simple but I could till now find any solution in standard Report Writer or in Report Painter and I donu2019t want to create a specific report with an ABAP.
In the system we have set quit complex projects with WBS, Networks and Activities. In each project there are also material which are standard material consumed from collective stock and specific material produced internally or purchased externally. The specific material are consumed through specific stock project.
In Report Painter/Writer there are ratios for the open line items for purchase orders or requisitions but I am not able to find the same values for the shop floor orders made internally. Further I get the values for the planned shop floor orders and of course the complete actual (coming from both requirements) but I will know what are the values which are between (nat yet actual and plan).
Has anybody already faced this situation or do anyone the solution to my problem?
I thank you for your replies.
Best regardsHi
Please use table EKAB for your search instead of using EBAN Or EKKO
Thanks & Regards
Kishore -
SFDM Tool (Shop Floor Dispatching and Monitoring), Technical questions
Hi Everybody,
i am very excited to change knowledge here on the SCN.
Right now I am analyzing the SFDM Tool (Shop Floor Dispatching and Monitoring) and need some more Information, which cannot be found via Internet research. I hope someone, who is familiar with the technical details can support me with answers.
1. Master Data:
- How does the Interchange of master data (such as machine capacities in terms of time/quantities or number of available machines) work between the SFDM and the ERP System?
- Is there a permanent interface between the SFDM and the master data in the ERP System?
- If so, which of the master data are communicated?
- Are there any limitations?
- Do BAPIs (Business Application Programming Interface) play a role?
- Is any further master data maintenance necessary, if the customer wants to implement SFDM?
2. There is a backend component situated in the ERP System called "SFDM on ABAP 1.0". What is the aim of this component?
3. Does the SFDM work with algorithms? If so, why?
4. Does the SFDM consider other machines in the same production plant?
5. Does it work over HANA?
6. Any further functionalities or restrictions?Hi
i wouldn't recommend SFDM for performance problem solving, if this is the issue you are facing.
If this is because planners are "lost" with CM25 because of problems for Production Orders selection and so-on, then try SFDM.
There is no new functionality compared to CM2x transactions within ERP.
The benefits are clearly focused on design and user-friendliness:
interactive logs
easy configuration of settings and strategy compared to CM2x TCodes
accessible details
Please keep also in mind the fact that this is working for individual capacities (cf. Rough Guide) and related constraints in terms of capacity category (only 0001 is supported).
Best regards.
Pierre-Edouard -
I have made print setting in opk8 and it is working fine with one material , one order typeand one production order, where I can see preview of shop floor paper.
But when i make production order with same material , order type and same plant. Then iam not able to get print privew (when i press print option in menu FUNCTION.
I get message After the next update the order will be printed.In my question , I hav mentioned that for same plant, same material, same and same order type, for one production order I can view print preview in CO02, co04 serveral times
But for other prodcution order, for same plant, same material, same and same order type iam not able to see print preview in co02 or co04. In that case, everytime i get message -After the next update the order will be printed -
CN22 - Print Shop Floor Papers for Network Orders
Hi All,
We are printing shop floor papers for network orders - the printers are setup, configuration is working fine.
However, there is a sporadic error: when we select "Print" and then "Save" in CN22, the system pops up a window with the list of all network activities. However, for some reason, the first time this is done, only a few network activities appear on the list. If we close the pop up, then select "Print" and then "Save" again, the whole list appears. Has anyone encountered this before? I looked through OSS, but couldn't tell if any of the notes would be applicable to resolve the issue.Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry). -
hi guys,
very good morning,
plz explain in details the setting for printing shop floor papers with header and components with goods issue slip and confirmations slips,
thanks in advance,
MohanIn OPK8
Name of the list - LG01, LG03, LK02, LV02
Spool parameters - User and plant = *
Reference operation - type - *, ref order = your order type
Forms -
LG01 - PSFC_OBJECT-LIST
LG03 - PSFC_ZUGL-LIST
LK02 - PSFC_GOOD-ISS-SL
LV02 - PSFC_CONF-TICKET
Print prig -
LG01 - PPPROBJU
LG03 - PPPRZUGL
LK02 - PPPRWARS
LV02 - PPPRRUEC
List control for transaction
ref order type, plant, MRP controler-*
transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
Flow control for transaction - all are online
do this setting and then create Prod order/GI/Confirm and print
come back if required. -
Production Schedule Profile & shop floor paper printing.....
Hi there ,
If we set the Execute Printing checkbox in the T-code <b>CORY</b>for a production scehedule profile....... then when we will release the order along with the other shop floor paper do the Transfer Order will also get printed if the material is warehouse managed.........
Please enlighten me .....
Thanks & Regards
KaushikHi there ,
Thanks for your reply...... I am aware of the fact that the shop floor paper will be printed once the order is relased & the relevant config is done in the Production schedule Profile.........
But in case of the material which are warehouse managed the Transfer requirement will be created & the further the Transfer Order........... I wan tto know that these will also Print the Transfer Order doucment for the warehouse managed material .......
Thanks & Regards
Kaushik -
Rejecting semi finished material in shop floor operation wise
Dear all,
How can I reject the material when I found the quality is not up to mark when the material is in process in shop floor in any operation.
Quality management is activated in material master but I don't know the process or steps for rejecting the material so that user cannot confirm the order.
Thanks in advanceHello ,
You can reject in line production at any point of time due for quality reasons.
Quality activate with 03 inspection type
Critical MIC's - Defect recording marked ok in Control indicator.
In customizing, notification type needs to be assigned with inspection type.
when u recorded your results and any defect found then in bckgrnd notification created where you nedd to fill each and every information related to defect.
Now, your another query, if defect found then system won't allow confirmation for the order. than you need to use one exit EXIT_SAPLCORF_106, where you need to pass inspection lot number and its UD valuation, if it is rejected then system won't allow confirmation. on other hand you need to change it again once you found production ok as Accepted so that pp will confirm it.
Regards -
WIP / Shop floor inventory amount
Hi,
We can get the inventory of raw material and finish prodcut with MC.1, with the stock and amount as well, as per std. procedure when the rm issue against production order the raw material account is credit BSX and onsumption account GBB-VBR is debit and when the GR is made for order BSX for finish material is credit and GBB-AUF is debit, but how we can find the total inventory of shop floor only WIP material which is after issue of ra and before the making GR of finish material with KKAX and KKAY we can get the details report but how to get that all amount in one GL account for finance reporting purpose, Fi person want to see
inventory report as
RM inventory
Finish Goods inventory
WIP inventory.
regards,
zafarHi,
to fulfill your requirement there is no possibility in standard sap. You please develop a Z-report or write a query. Use following tables and get it done. Tables for inventory report are....mara (material) marc (sku), mard-storage location, mslb-STOCK,
zm008-usage, MARD-storage location, MBEW-material valuation, EKKO-po header, EKPO -po item, EKET "po receipt,
EKBE-po history
Tables for WIP m,aterial are....KKAX and KKAY. Ihope this will help you. Thanking you. -
Inspection characteristics transfer to Shop floor system
Hi,
We are using a third party shop floor system with terminals in each workcenter/stations in Production line. How do we transfer the Production order inspection characteristics to these terminals, do the results recording at the terminals and send the results back to SAP inspection lots.
Thanks
ThomasThis capability is standard SAP via PP-PI and PI sheets. You have several options. This does require software on the process control side to 'talk' with SAP but SAP provides the info to write the needed programs. Larger vendors of process control software will probably already have the necessary programs available for you. The "talking" is done via process control instructions which follows specific standards to pass messages between equipment. SAP can produce and receive the necessary messages.
You can transfer data to batch characteristics from third party shop control software via process messages. This is standard SAP. See the link below.
http://help.sap.com/saphelp_46c/helpdata/en/d8/f85c40e89811d195f6080009c17b92/content.htm
You can also transfer characteristic data between inspection lots and your process control systems
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPPIPCS/PPPIPCS.pdf
(see page 27 for the inspection data messages, category PI-QMSMR)
The link above should give you a basic understanding of the possibilities. You should contact the vendor of your process control software. Many of the larger vendors probably have done the SAP integration already and can probably refer you to a consultant or in house person that has this specific experience and can help you get this going. Also contact SAP and ask about their approved vendors that have certified interfaces to work with SAP.
FF -
What is demand planning and shop floor plannig, explain briefly?
I like to know and understand about demand planning and shop floor plaining? please explain briefly?
Thank you,
yorkHi Les,
<b>Demand Planning</b> is
Application component in the Advanced Planner and Optimizer (APO) that allows you to forecast market demand for your company's products and produce a demand plan.
APO Demand Planning has a data mart in which you store and maintain the information necessary for the demand planning process in your company. Using this information along with user-defined planning layouts and interactive planning books, you can integrate people from different departments into the forecasting process. The APO DP library of statistical forecasting and advanced macro techniques allows you to create forecasts based on demand history as well as any number of causal factors, and use a consensus-based approach to consolidate the results. Marketing intelligence and management adjustments can be added by using forecast overrides and promotions. The seamless integration with APO Supply Network Planning supports an efficient S&OP process.
regards
kp -
What is SAP Shop floor Licenses .
SAP Shop floor Licenses
Hello Sheena,
There is no specific authorization nor role for this, just a transaction and an attribute. Maintain the attribute requester and populate it with user name (starting with "US") or node from the org. structure (O 50000061).
The "shop for" field is avaible in the the transaction BBPSC01 (Shopping Cart - Full Functionality).
Rgds,
Pierre -
Can not add item to the shopping Cart with FireFox 8.0
I can not add items to the shopping cart with Firefox 8.0. Switch to IE everything works then.
Such details are stored in a cookie, so make sure that you do not block cookies on that site.
*Tools > Page Info > Permissions
You can inspect and manage the permissions for all domains on the <b>about:permissions</b> page via the location bar.
*http://kb.mozillazine.org/Cookies
*http://kb.mozillazine.org/Websites_report_cookies_are_disabled -
Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
ThanksHi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy
Maybe you are looking for
-
There are 96 songs on my iPhone and over 200 songs in iTunes that I DID NOT download.
I don't know where these all came from. I have several whole albums by the fray, a few dozen songs from various artists and genres, and about 40 "songs" that have only a 14-16 digit number for a title and no artist/album/genre (For example: 20091024
-
Uilibmerge error during install. Does it matter?
I am trying to install Oracle 8.0.5 standard on Redhat 5.2. After the "install, do not create DB objects" has run, the install.log file shows the following message in several places: Entering oracore_common.ins- Loading ORACLE Core Libraries Administ
-
How to load 2 CVI panels as child window to a parent window created by VC++?
Hello, I want to load 2 CVI panels as child window to a main window, which is created by VC++. the CVI panel is in a dll file(created by LabCVI). the Load child panel routine is something like following, int __stdcall RunDLLUI (int* hParent ) int hp
-
I not sure what to do. I have started a collection of family stories that I want to add to over time and have available for family member to read either as an ebook or in the case of those without a tablet or iphone, on their computer as a pdf file(
-
How often should you update your ipod?
How often is it recommended to update your ipod?