Incorrect values in the Volume Information

On startup all I see is a white screen. Using the startup manager and booting from a clone all is fine. When I run Disk Warrior on the internal WD500 the report says "Incorrect values in the Volume Information were repaired". At this point I may be able to shutdown and restart a few times normally. Eventually the iMac refuses to shut down and after a forced shutdown and restart I'm back to the white screen. This has been happening for a few months now. Any idea what could be causing this?

Have you considered consulting a Genius at the Genius Bar? or an Apple Authorized Service provider?

Similar Messages

Incorrect value in the dynamic table.

Hii,
      I am new to abap, i wrote a program which is showing dump " Incorrect value in the dynamic table." .
   Error in the ABAP Application Program
   The current ABAP program "SAPLKKBL" had to be terminated because it come across a statement that unfortunately cannot be executed.
pls help me to solve this issue.
REPORT zBLOCKED_ALV.
*tables: ekko,ekpo.
type-pools slis.
parameters porder like ekko-ebeln.
data: i_ekko type   table of ekko,
          i_ekpo type   table of ekpo,
         fieldcat type slis_t_fieldcat_alv,
         keyinfo type slis_keyinfo_alv.
clear keyinfo.
keyinfo-header01 = 'ebeln'.
yinfo-item01 = 'ebeln'.
select * from ekko into table i_ekko where ebeln = porder.
select * from ekpo into table i_ekpo for all entries in i_ekko
    where ebeln = i_ekko-ebeln.
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
      EXPORTING
        I_PROGRAM_NAME               = sy-cprog
        I_INTERNAL_TABNAME           = 'i_ekko'
        I_STRUCTURE_NAME             = 'ekko'
      CHANGING
        CT_FIELDCAT                  = fieldcat.
refresh fieldcat.
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
      EXPORTING
        I_PROGRAM_NAME               = sy-cprog
        I_INTERNAL_TABNAME           = 'i_ekpo'
        I_STRUCTURE_NAME             = 'ekpo'
      CHANGING
        CT_FIELDCAT                  = fieldcat.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM             = sy-cprog
    IT_FIELDCAT                    = fieldcat
    I_TABNAME_HEADER               = 'i_ekko'
    I_TABNAME_ITEM                 = 'i_ekpo'
    IS_KEYINFO                     = keyinfo
TABLES
    T_OUTTAB_HEADER                = i_ekko
    T_OUTTAB_ITEM                  = i_ekpo.

Hi,
You have to pass 'EKKO' and 'EKPO' i.e in caps to the exporting parameter I_STRUCTURE_NAME of the function module
'REUSE_ALV_FIELDCATALOG_MERGE'.
I think this would work, if not pls let me know.
Thanks,
Radhika

How to catch an event when the user change values in the project information dialog

hi,
i would like to know how to catch an event in my C# code when the user change values in the project information dialog?
taskChange doesn't catch these changes.
thanks.
Thanks, Sharon.

You need to write save button event handler for project information dialog. Link is having same functionality described.
http://blogs.msdn.com/b/husainzgh/archive/2011/08/01/hooking-into-the-project-detail-page-ribbon-save-button-without-overriding-out-of-box-functionality-in-project-web-access-for-project-server-2010.aspx
http://www.projectserver2010blog.com/2010/01/sharepoint-2010-webpart-client-server.html
kirtesh

Changing of the volume information using BAPI_OUTB_DELIVERY_CHANGE

Hi experts,
I want to change the volume details in OUTBOUND DELIVERY using
BAPI : BAPI_OUTB_DELIVERY_CHANGE.
What all the values that i have to pass to the BAPI.
Waiting for your replays.
Thanks in advance,
Kruthik.

Got solution by myself

Java returning incorrect values for width and height of a Tiff image

I have some TIFF images (sorry, I cannot post them b/c of there confidential nature) that are returning the incorrect values for the width and height. I am using Image.getWidth(null) and have tried the relevant methods from BufferedImage. When I open the same files in external viewers (Irfanview, MS Office Document Imaging) they look fine and report the "correct" dimensions. When I re-save the files, my code works fine. Obviously, there is something wrong with the files, but why would the Java code fail and not the external viewers? Is there some way I can detect file problems?
Here is the code, the relevant section is in the print() routine.
* ImagePrinter.java
* Created on Feb 27, 2008
* Created by tso1207
import java.awt.Graphics2D;
import java.awt.Image;
import java.awt.print.PageFormat;
import java.awt.print.PrinterException;
import java.io.File;
import java.io.IOException;
import java.util.Iterator;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.stream.FileImageInputStream;
import javax.imageio.stream.ImageInputStream;
import com.shelter.io.FileTypeIdentifier;
public class ImagePrinter extends FilePrintable
 private final ImageReader _reader;
 private final int _pageCount;
 private final boolean _isTiff;
 //for speed we will hold current page info in memory
 private Image _image = null;
 private int _imgWidth = 0;
 private int _imgHeight = 0;
 private int _currentPage = -1;
 public ImagePrinter(File imageFile) throws IOException
 super(imageFile);
 ImageInputStream fis = new FileImageInputStream(getFile());
 Iterator readerIter = ImageIO.getImageReaders(fis);
 ImageReader reader = null;
 while (readerIter.hasNext())
 reader = (ImageReader) readerIter.next();
 reader.setInput(fis);
 _reader = reader;
 int pageCount = 1;
 String mimeType = FileTypeIdentifier.getMimeType(imageFile, true);
 if (mimeType.equalsIgnoreCase("image/tiff"))
 _isTiff = true;
 pageCount = reader.getNumImages(true);
 else
 _isTiff = false;
 _pageCount = pageCount;
 public int print(java.awt.Graphics g, java.awt.print.PageFormat pf, int pageIndex)
 throws java.awt.print.PrinterException
 int drawX = 0, drawY = 0;
 double scaleRatio = 1;
 if (getCurrentPage() != (pageIndex - getPageOffset()))
 try
 setCurrentPage(pageIndex - getPageOffset());
 setImage(_reader.read(getCurrentPage()));
 setImgWidth(getImage().getWidth(null));
 setImgHeight(getImage().getHeight(null));
 catch (IndexOutOfBoundsException e)
 return NO_SUCH_PAGE;
 catch (IOException e)
 throw new PrinterException(e.getLocalizedMessage());
 if (!_isTiff && getImgWidth() > getImgHeight())
 pf.setOrientation(PageFormat.LANDSCAPE);
 else
 pf.setOrientation(PageFormat.PORTRAIT);
 Graphics2D g2 = (Graphics2D) g;
 g2.translate(pf.getImageableX(), pf.getImageableY());
 g2.setClip(0, 0, (int) pf.getImageableWidth(), (int) pf.getImageableHeight());
 scaleRatio =
 (double) ((getImgWidth() > getImgHeight())
 ? (pf.getImageableWidth() / getImgWidth())
 : (pf.getImageableHeight() / getImgHeight()));
 //check the scale ratio to make sure that we will not write something off the page
 if ((getImgWidth() * scaleRatio) > pf.getImageableWidth())
 scaleRatio = (pf.getImageableWidth() / getImgWidth());
 else if ((getImgHeight() * scaleRatio) > pf.getImageableHeight())
 scaleRatio = (pf.getImageableHeight() / getImgHeight());
 int drawWidth = getImgWidth();
 int drawHeight = getImgHeight();
 //center image
 if (scaleRatio < 1)
 drawX = (int) ((pf.getImageableWidth() - (getImgWidth() * scaleRatio)) / 2);
 drawY = (int) ((pf.getImageableHeight() - (getImgHeight() * scaleRatio)) / 2);
 drawWidth = (int) (getImgWidth() * scaleRatio);
 drawHeight = (int) (getImgHeight() * scaleRatio);
 else
 drawX = (int) (pf.getImageableWidth() - getImgWidth()) / 2;
 drawY = (int) (pf.getImageableHeight() - getImgHeight()) / 2;
 g2.drawImage(getImage(), drawX, drawY, drawWidth, drawHeight, null);
 g2.dispose();
 return PAGE_EXISTS;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @return
 public int getPageCount()
 return _pageCount;
 public void destroy()
 setImage(null);
 try
 _reader.reset();
 _reader.dispose();
 catch (Exception e)
 System.gc();
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public Image getImage()
 return _image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgHeight()
 return _imgHeight;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgWidth()
 return _imgWidth;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param image
 public void setImage(Image image)
 _image = image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgHeight(int i)
 _imgHeight = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgWidth(int i)
 _imgWidth = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getCurrentPage()
 return _currentPage;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setCurrentPage(int i)
 _currentPage = i;
}Edited by: jloyd01 on Jul 3, 2008 8:26 AM

Figured it out. The files have a different vertical and horizontal resolutions. In this case the horizontal resolution is 200 DPI and the vertical is 100 DPI. The imgage width and height values are based on those resolution values. I wrote a section of code to take care of the problem (at least for TIFF 6.0)
 private void setPageSize(int pageNum) throws IOException
 IIOMetadata imageMetadata = _reader.getImageMetadata(pageNum);
 //Get the IFD (Image File Directory) which is the root of all the tags
 //for this image. From here we can get all the tags in the image.
 TIFFDirectory ifd = TIFFDirectory.createFromMetadata(imageMetadata);
 double xPixles = ifd.getTIFFField(256).getAsDouble(0);
 double yPixles = ifd.getTIFFField(257).getAsDouble(0);
 double xRes = ifd.getTIFFField(282).getAsDouble(0);
 double yres = ifd.getTIFFField(283).getAsDouble(0);
 int resUnits = ifd.getTIFFField(296).getAsInt(0);
 double imageWidth = xPixles / xRes;
 double imageHeight = yPixles / yres;
 //if units are in CM convert ot inches
 if (resUnits == 3)
 imageWidth = imageWidth * 0.3937;
 imageHeight = imageHeight * 0.3937;
 //convert to pixles in 72 DPI
 imageWidth = imageWidth * 72;
 imageHeight = imageHeight * 72;
 setImgWidth((int) Math.round(imageWidth));
 setImgHeight((int) Math.round(imageHeight));
 setImgAspectRatio(imageWidth / imageHeight);
 }

Incorrect value with Script Logic

Hello,
From initial value called 2008.ORC we want to calculate for each month the percentage , from child DIASMES.
Now, with the script logic ( I´ll put down later) we have an incorrect value in the column 2008.TOTAL.
In other words, I´m sure I´m wrong with "WHAT" or "WHERE sentence or maybe the operation "FACTOR=USING/TOTAL" fails because the crossing between dimensions it´s incorrect.
*RUNALLOCATION
*FACTOR = USING/TOTAL
*DIM FABRICA_MAQ WHAT=BAS(FABRICAFF); WHERE=BAS(FABRICAFF); USING=BAS(FABRICAFF);
*DIM PRODUTOS WHAT=BAS(TOTALPROD); WHERE=BAS(TOTALPROD); USING=SP;
*DIM TIME WHAT=2008.ORC;WHERE=BAS(2008.TOTAL); USING=BAS(2008.TOTAL);
*DIM TIPO WHAT=BAS(TOT); WHERE=BAS(TOT); USING=ST;
*DIM VARIAVEIS WHAT=MIXACABADA; WHERE=MIXACABADA; USING=DIASMES;
*DIM DATASRC WHAT=INPUT; WHERE=INPUT; USING=INPUT;
*DIM VERSAO WHAT=BUDGET; WHERE=BUDGET; USING=BUDGET;
*ENDALLOCATION
*COMMIT
The Key is to see in the column 2008.TOTAL ( when we selected "BAS") the value of parent divided into "DIASMES" !
Thanks !!

Your factor statment references a TOTAL, but you don't reference the total in your DIM statements. If you look at the debug log carefully, you should notice that there's no calculation of a TOTAL value.
Try something like this. The only reason I move some dimensions from the *RUNALLOCATION up to the *XDIM's is for legibility, since the allocation makes no shifts to these dimensions. The logic should produce the same results, either way.
// These dimensions have no shift of data.
*XDIM_MEMBER VERSAO=BUDGET
*XDIM_MEMBER DATASRC=INPUT
// I'm assuming here that FACRICAFF is the top member of this dimension.
*XDIM_MEMBERSET FABRICA_MAQ = <ALL>
*RUNALLOCATION
*FACTOR = USING/TOTAL
*DIM PRODUTOS WHAT=BAS(TOTALPROD); WHERE=BAS(TOTALPROD); USING=SP; TOTAL=<<<
*DIM TIME WHAT=2008.ORC;WHERE=BAS(2008.TOTAL); USING=BAS(2008.TOTAL); TOTAL=<<<
*DIM TIPO WHAT=BAS(TOT); WHERE=BAS(TOT); USING=ST; TOTAL=<<<
*DIM VARIAVEIS WHAT=MIXACABADA; WHERE=MIXACABADA; USING=DIASMES; TOTAL=<<<
*ENDALLOCATION
*COMMIT

[Forum FAQ] Reduce the size of System Volume Information folder

Symptom
There is a folder called System Volume Information in the root of each drive. (Figure 1)
Sometimes, you may find the size of System Volume Information folder is too large. However,
it is not recommended to delete the files in it casually since
the System Volume information folder is
created by the Operating System and used by Windows for storing critical information related to the system configuration.
Figure 1.
Note:
The System Volume Information folder
is a hidden system folder on each drive by default, you can show the hidden files and folders before accessing it.
Cause
In general, the System Volume Information folder contains
System Restore points, Distributed Link Tracking Service databases, Content Indexing Service databases, WinFS databases and information used by the Volume
Snapshot Service.
If you enable shadow copies on a volume, more and more VSS snapshots will be created in the "System Volume Information" folder. Then the size of this folder will become
too large.
Solution
You can follow the steps below to free up the space of System Volume Information folder safely:
1. Delete the GUIDs files in System Volume Information folder using DiskShadow.exe.
1) Open a command prompt with administrator privilege, then type “DiskShadow.exe” at the command prompt.
2) Type “Delete shadows OLDEST <BackupStorageLocation>”
at the command prompt.
3) Type “Exit” to exit DiskShadow.exe.
Note: Theoldestshadow
copy in the folder will be deleted each time
you run the commands. Before you run those commands, please
make sure the oldest shadow copy is not useful to you.
2. Changing the amount of disk space available to VSS
1) Right-click on the drive you want to configure, and click “Properties”.
2) Click “Shadow Copies” and then click “Settings”. (Figure 2)
Figure 2.
3) Choose “Use limit" and type the maximum size you want to set for the shadow copies, then click “Ok”.
(Figure 3)
Figure 3.
Note: The extra shadow copies would be deleted in System Volume Information folder once you
configure the Maximum size to a lower value than before.It
will delete the older shadow copies firstly. Before you configure this setting, please make sure that you have enough space
to create shadow copies.
More Information
What's the deal with the System Volume Information folder?
http://blogs.msdn.com/b/oldnewthing/archive/2003/11/20/55764.aspx
Backup Version and Space Management in Windows Server Backup
http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
You could choose the shadow copies tap then choose Settings and then “use Limit" put in 1024MB, OK and OK, the drive would have plenty of free space.
For more detailed information, please refer to the thread below:
Windows 2008 R2 System Volume Information too large
http://social.technet.microsoft.com/Forums/windowsserver/en-US/647d350f-f3a0-487d-b885-f2eaa3f029f0/windows-2008-r2-system-volume-information-too-large
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

Hotmail is having problems:
http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
http://www.engadget.com/2013/08/14/outlook-outage/
http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
http://mashable.com/2013/08/14/outlook-down/
http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

How to read value of the period for which the sales volume has been entered

Hi Experts,
In the transaction "/ncrm_ipm_d_usage_data", we have a scenario where a user can enter value in the "sales volume reported" column for more than one period. Now we need to read the period_from (date from) for the first "sales volume reported" value entered.
For example: If a user enters values in "sales volume reported" column for the period_from 02/01/2009, 05/01/2009 & 08/01/2009. We need to read the first period_from value for which sales volume value is entered. Which means it should be 02/01/2009.
Our issue is that we are unable to find the standard method or variable which holds this value. We found these classes through debugging but it does not help us.
1. Class CL_CRM_IPM_USAGE_DATA
Methods we found:
1. FIND_CONTRACT
2. MAINTAIN_DATA
3. MAP_UI_DATA
4. FILL_CUMULATED_I
5. GET_USAGE_DATA_KEY
Please help us to find the standard method or variable which reads the period_from for the first sales volume entered.

Hi Student5088,
I used a Copy-Block to create a delay for a certain number of values (time) of a signal. With that you can continuously compare signal at T1 with Signal at T1*0.5.
Greetings
Walter
Attachments:
Compare.DAC ‏28 KB

Displaying the current users information instead of the value of the person who completed the form in the first place.

I found this fantatic post regarding querying the user profile service
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx?pi47623=2#comments
However i have an issue whenever the form is opened again either to view or edit, it displays the current users information
instead of the value of the person who completed the form in the first place.
Please help me, I'm turning more grey each minute

I think it is how the current user information is stored based on your logic.
You might be quering current value again when loading the form (Form load Rule).
you have to tweak your logic, after the user submits the form you can set the username to the one who saved it.
or in form load, write a logic to see if the form was not saved before and then query the username( by using internal field like "formstatue")
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you

To whom it may concern I would like to inform you about an error occurred when I upgraded my firmware to IOS 6 When I plug a headphone/earphone into my, then unplug it, the volume turned out to be unadjustable I have attached 2 screenshots of the error, p

To whom it may concern
I would like to inform you about an error occurred when I upgraded my firmware to IOS 6
When I plug a headphone/earphone into my, then unplug it, the volume turned out to be unadjustable
I have attached 2 screenshots of the error, pls help?
Thanks.

Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

Where we have to set the absense information values.

hi,
here i am facing problem to identify the absence information input values in payroll for creating new absence plans.
please help on this issue any body.
regards,
krishna

Krishna
Can you please let us know why you are linking the input value of the absence element to the Payroll.
We can have the Absence management even without payroll implemented
you can refer the guide B15517-01 under the section absence and leave management this wil give you a clear setup details
Regards
Ramesh Kumar S

Can the volume slider show value in non-DB?

I remember seeing the volume slider in the channel strip showing normal number values instead of db, but I cannot find a way to changes this. Anyone knows?
André

The worst part is that once you get used to using the db scale, and then open an old song that is set to numbers (MIDI 0-127) there is no way to set it to db. Why ever remove a function?

HT2693 Why does my Ipad keep telling me that my security code is incorrect when i am trying to update the billing information?

Why does my Ipad keep telling me that my security code is incorrect when i am trying to update the billing information?

It might be because the billing address you provided doesn't exactly match your bank records. It has to match your statement exactly. See http://support.apple.com/kb/TS1646.

Change the volume image flags values

Hi
I am using Windows 8.1 Update and Windows ADK.
Without using the ImageX command, how do I change the volume image flags values displayed with the Dism /Get-ImageInfo /ImageFile:"<WIM_File_Path>\<WIM_Name.wim" /Index:<Image_Index> command?
Where are these values stored?
Thanks
Bye
Balubeto

Hello,
If you want change the value, you can use the command line (imagex) or one tools (Gimagex)
https://www.autoitscript.com/site/autoit-tools/gimagex/

Incorrect values in the Volume Information

Similar Messages

Maybe you are looking for