Incoterms - necessity

Hi Gurus ,,
can you pls explain about the Incoterms and its necessity ,,?
thanks in advance
regards
R.Kannan

hi
Incoterms relevance in business: Commonly-used trading terms that comply with the standards established by the International Chamber of Commerce (ICC).
Use: Incoterms specify certain internationally recognised procedures that the shipper and the receiving party must follow for the shipping transaction to be successfully completed.
Example
If goods are shipped through a port of departure, the appropriate Incoterm might be: FOB ("Free On Board"). You can provide further details (for example, the name of the port) in the secondary Incoterm field: FOB Boston, for example.
Different types of inco terms
"EXW"- Ex Works
Title and risk pass to buyer including payment of all transportation and insurance cost from the seller's door. Used for any mode of transportation.
Seller : In EXW shipment terms the Seller (Exporter) provides the goods for collection by the Buyer (Importer) on the seller or exporter's promise. Responsibility for the seller is to put the goods, in a good package which is adaptable and disposable by the transport.
Buyer : The buyer or Importer arranges insurance for damage transit goods. The Buyer or importer has to bear all costs and risks involved in shipment transactions.
(However, if the parties wish the seller to be responsible for the loading of the goods on departure and to bear the risks and all the costs of such loading, this should be made clear by adding explicit wording to this effect in the contract of sale. )
"FCA"- Free Carrier named point
"FCA"- Free Carrier named point: Title and risk pass to buyer including transportation and insurance cost when the seller delivers goods cleared for export to the carrier. Seller is obligated to load the goods on the Buyer's collecting vehicle; it is the Buyer's obligation to receive the Seller's arriving vehicle unloaded.
Seller : The Seller’s responsibility is to deliver the goods into the custody of the transporters at defined points. It is important for the chosen place of delivery to have an impact on the obligations of loading and unloading the goods.
Buyer : The Buyer nominates the means of transport or shipping mode and pays the shipment charges.
The seller and the buyer agree upon the place for delivery of goods. If the buyer nominates a person other than a carrier or transporter to receive the goods, the seller is deemed to fulfill his obligation to deliver the goods when they are delivered to that person.
"FAS"- Free Alongside Ship
FAS- Free Alongside ship: Title and risk pass to buyer including payment of all transportation and insurance cost once delivered alongside ship by the seller. Used for sea or inland waterway transportation. The export clearance obligation rests with the seller.
In FAS has price includes all the costs incurred in delivering the goods alongside the vessel at the port or nominated place of the buyer but there is not applicable charges to the seller for loading the goods on board of vessel and no ocean freight charges and marine insurance.
Seller: The responsibility of the seller are fulfilled when the goods are placed cleared along the ship.
Buyer: Buyer or Importer bear all the expenses and risks of loss or damage of transit goods which are delivered along the ship.
"FOB" - Free On Board
The FOB (Free on Board) price is inclusive of Ex-Works price, packing charges, transportation charges upto the place of shipment., Seller also responsible for o clear customs dues, quality inspection charges, weight measurement charges and other export related dues. It is important that the shipment term in the Bill of Lading must carry the wording "Shipped on Board' it must bear with signature of transporter or carrier or his authorized representative with the date on which goods were "Boarded".
Seller :Seller responsible for clear customs dues, quality inspection charges, weight measurement charges and other export related dues. It is important that the shipment term in the Bill of Lading must carry the wording "Shipped on Board' it must bear with signature of transporter or carrier or his authorized representative with the date on which goods were "Boarded".
Buyer : The buyer indicates the ship and pays freight, transfer expenses and risks is done when the goods passes or forwarding to the buyers warehouse by rail or ship.
"CFR"- Cost And Freight
In this term the exporter bears the cost of carriage or transport to the selected destination port, in this term the risk transferable to the buyers at the port of shipment.
Seller: The chooses the carrier, concludes and bears the expenses by paying freight to the agreed port of destination, unloading not included. The loading of the duty-paid goods on the ship falls on him as well as the formalities of forwarding. On the other hand, the transfer of risks is the same one as in FOB.
Buyer: The buyers supports all the risk of transport, when the goods are delivered aboard by ship at the loading port, buyer receives it from the carrier and takes delivery of the goods from nominated destination port.
"CIF"- Cost, Insurance And Freight
CIF- Cost, Insurance and Freight: Title and risk pass to buyer when delivered on board the ship by seller who pays transportation and insurance cost to destination port. Used for sea or inland waterway transportation.
This Term involves insurance with FOB price and ocean freight. The marine insurance is obtained by the exporter at his cost against the risk of loss or damage to the goods during the carriage.
Seller: The CFR extends additional obligation to the seller for providing a maritime So insurance against the risk of loss or damage to the goods. The seller pays the insurance premium.
Buyer: He supports the risk of transportation, when the goods have been delivered aboard the ship at the loading port. He takes delivery of the goods from the carrier to the appointed port or destination.
"CPT"- Carriage Paid To
CPT- Carriage Paid To: Title, risk and insurance cost pass to buyer when delivered to carrier by seller who pays transportation cost to destination. Used for any mode of transportation.
This term uses land transport by rail, road and inland waterways. The seller and exporter are responsible for the carriage of goods to the nominated destination and have to pay freight up the first carrier.
Seller: The seller or exporter controls the supply chain after paying customs clearance for export. Seller or Exporter select the carrier and pay the expenses up to the destination.
Buyer: The risks of goods damages or loss are supported by the buyer as goods are given by the first carrier. The buyer or importer has to pay importation customs clearance and the unloading costs.
"CIP"- Carriage And Insurance Paid To
CIP- Carriage and Insurance Paid To: Title and risk pass to buyer when delivered to carrier by seller who pays transportation and insurance cost to destination. Used for any mode of transportation.
This term is similar to Carriage Paid To but the seller has to arrange and pay for the insurance against the risk or loss or damage of the goods during the shipment.
Seller: The seller or buyer has to provide insurance and seller pays the freight and insurance premium.
Buyer: The buyer or importer supports the risks of damages or loss, as goods are given to the first carrier. The buyer has to pay customs clearance and unloading charges.
"DAF"- Delivered At Frontier
DAF- Delivered At Frontier: Title, risk and responsibility for import clearance pass to buyer when delivered to named border point by seller. Used for any mode of transportation.
This term is used when the goods are to be carried by rail or road.
Seller : The seller is responsible to make the goods available to the buyer by the carrier till the customs border as defined in sales contract.
Buyer : The buyer takes delivery of the goods at the contract agreed point border and he is responsible for bearing all customs formalities.
DES"- Delivered Ex-Ship
DES- Delivered Ex-Ship: Title, risk, responsibility for vessel discharge and import clearance pass to buyer when seller delivers goods on board the ship to destination port. Used for sea or inland waterway transportation.
Seller: The seller is responsible to make the goods available to the buyer up to the named quay or after crossing the customs border.
Buyer: The buyer takes delivery of the goods from ship at destination port and pays the expenses of unloading.
DEQ"- Delivered Ex-Quay
DEQ- Delivered Ex-Quay: Title and risk pass to buyer when delivered on board the ship at the destination point by the seller who delivers goods on dock at destination point cleared for import. Used for sea or inland waterway transportation.
"DDU"- Delivered Duty Unpaid
DDU- Delivered Duty Unpaid: Seller fulfills his obligation when goods have been made available at the named place in the country of importation.
Seller: The seller is responsible for all transportation cost and accept the customs duty and taxes as per defined in customs procedures.
Buyer: The buyer is responsible of the importation customs formalities.
"DDP"- Delivered Duty Paid
DDP- Delivered Duty Paid: Title and risk pass to buyer when seller delivers goods to the named destination point cleared for import. Used for any mode of transportation.
Seller: The seller is responsible to make the goods available to the buyer at his risk and cost as promised by the buyer. All the Taxes and duty on importation is promised by the buyer to the seller.
Buyer: The buyer is responsible to take delivery at a nominated place and pays the expenses for unloading of goods.
regards
Vishal

Similar Messages

  • Control of Incoterms in creation of Shipment Costs

    Dear All,
    We calculate shipment costs (Through Transportation module in SD-Freight payment-Outwards) on calculation base A (Delivery) or B
    (Delivery item) and do not want to calculate deliveries that have certain
    Incoterms (for example, TOP-To Pay, where Customer makes payment to Transporter).
    By default, the system always creates a subitem in the shipment cost
    document for the corresponding calculation base for every delivery item or for every delivery involved.
    We want to have Control over certain Incoterms where we don't pay to the customers. We want to restrict the users not to calculate Shipment Costs in TOP-To pay cases. Kindly help if any Userexits available for this scenario to handle.   
    Regards
    Subrat

    Hi,
    I think we have a similar requirement. For FCA transports is the transport cost zero. We have created a seperate condition in the cost procedure as a condition class A ( discount or surcharge ) in T_06. This has an access sequence assigned which uses a 9xx condition table (T_03) with fields Service agent f.stage ( TDLNR ) and
    Incoterms     ( INCO1 ). This enables us to maintain condition records in TK12. So FCA is maintained with 100 % deduction and thus no costs.

  • SAP SP necessária para suportar os componentes para o SAP GRC NFE 1.0 no XI

    oi,
    Como estamos atualizando as nossas caixas de XI de SAP XI SAP PI 3.0 para 7,11, verificando o SLD notamos que Nota Fiscal componente de software está disponível. Assim, a pergunta é o que é que os Service Packs do sistema fonte precisa ter, a fim de fornecer todos os componentes necessários para a NF-e?
    temos dois sistemas de fonte da qual enviamos os dados para XI, você pode sugerir o que é o pacote de serviços adequados para apoiar SAP GRC NFE 1.0 no XI
    1> 6,0 SAP ECC, SP, 14
    EHP 2, Nível 2
    PI_Basis = 2005_1_700, Level 14
    ST = PI 2008_1_700 Nível 2
    2> 6,0 SAP ECC, EHP 4
    Muito obrigado

    Ola, vi o seu e-mail mas resolvi responder por aqui!
    Na realidade, se voce for realmente trabalhar com o GRC, dependendo da secretaria da fazenda que voce ira trabalhar aconselhor que voce aplique o sp15 no grc, consule SAP Note 1487119, nessa nota haverao todos os procedimentos necessarios.
    Como haviamos falado anteriormente por e-mail, seria necessario, caso vc realmente queira trabalhar com o GRC a aplicacao de algumas notas tecnicas no proprio GRC.
    1477834     XML Layout Version 2.00: Missing parameters in NF-e BAdI
    1487119     SAPK-10015INSLLNFE: Support Package 15 for SLL-NFE
    1496216     Rejection of NFe because of wrong data type of date fields
    1499921     Problem with validation after implementing SP15
    1498700     Problem on signing NF-e
    1497767     Fill field qTrib for new layout version 2.0
    1500046     Upgrade validation rule for field ID for version 2.0
    1500742     Adjust validation for field NADICAO and NSEQADIC layout 2.00
    1501545     Problems in trying to see a XML in the IE
    1502612     Select the NFe Status Check Service for Incoming B2B message
    1502217     Extend validation rules for <DI>/<adi>, layout 2.00
    Sem mais, precisando me mais ajuda avise

  • Purchase Order and Incoterms

    Hi,Gurus
    I have a problem about incoterms in PO.
    In my company, there are three kinds of planned delivery costs,freight,insurance charge and customs clearance charge.
    They will be calculated as conditions as po creation.
    For example,Freight is defined as the following ratio:
    |IncoTerms|Freight Ratio
    | EXW     | 0.958%
    | FOB     |  1.829%
    I firstly entered incoterms FOB while PO creation, the ratio 1.829% was correctly carried out.
    and then not to save the PO,but change the incoterms from FOB into EXW right now,
    I found the condition item Freight still holds the older value,1.829%, in item detail.
    In one words,Changing incoterms will not lead to conditions re-calculation.
    Anyone could give me suggestion?

    Thanks.
    As well known,
    Incoterms is  a head-level field in purchase order.
    My purchase order should calculate the planned delivery costs,freights,insurance charges,which are based incoterms.
    The calculation logic is Freight = Item's net order value * rate.
    ex.
    1.PO item net order value = 1000 USD
    2.Case1: Incoterms = FOB,Freight rate = 1.829%
    3.Case2: Incoterms = EXW,Freight rate = 0.928%
    Create PO:
    PO incoterm is FOB, so the planned freight = 1000 * 1.829% = 18.29 USD
    Change PO incoterms
    Changed PO incoterms form FOB into EXW, so the planned freight = 1000 * 0.928% = 9.28 USD
    Now, my problem is that the above item's freight can not be automatically calculated again after incoterms was changed in PO head.
    By the way,
    Incoterms(INCO1) field  is in Communication Header for Pricing(KOMK),not in Pricing Communication Item(KOMP).
    MOVE I_KOMK TO E_KOMK. was added into User-exit LMEKO001.
    Edited by: Mic chen on Aug 19, 2009 3:41 AM

  • Header and Item Incoterms different in Sales order

    Hello SAP Guru's,
    I have an unique issue of Incoterms in Sales order item being different from the Header, when this happens any change to the header Incoterms is not getting copied to sales order Items.
    The issue is due the different Division maintained for Sales order item in the Material master, which is fetching the Inco 2 from the Different Sales area for this is customer.
    This is fine as per design where Item category is checked for Business data and Sales Document type is checked for different Division in the config.
    However the Business would like the Header Incoterms to be copied to all items and any change in Header should also be copied to Line items also.
    We had narrowed down on Couple of Alternatives:
    Remove the Business data allowed check in the Item category config
    But this would allow all Business data to be copied from sales order header to items
    2. Make changes to VBKD user Exit during Sales order creation to copy the Incoterms from Sales order header to items
    But this is causing multiple lines in VBKD and some issues while adding new items in VA02 ending with an Update termination.
    Would like to know whether there is any other Option whether there would be least impact and also would like your advice on the better Option between the above two Options.
    Thanks and Regards
    Mohammed Roshan

    Hi Lakshimipathi,
    Finally we removed the Business Item check in the Item category which is causing the Header incoterms and any changes in Header incoterms to be copied to Sales Order line items as required but we have an issue where Sales Order item Pricing date is being greyed out due these changes, Currently the Sales order Pricing date is being determined through a Z table triggered from a User Exit which was also editable in Sales order item level.
    Due to these new changes Sales order pricing date is being determined in the header and getting copied to the Sales order line item thus greying out the Sales order item pricing date field.
    Would like to know your thoughts on how removing the Business Item check in Item category in VOV7 is causing the grey out of sales Order item pricing date, where the Business can modify on certain occasions and what would the workaround to restore the functionality of Sales order item pricing date.
    Appreciate your inputs on this.
    Thanks and Regards
    Mohammed Roshan

  • INCOTERMS Missing

    Hi All Gurus in SAP,
    I have a question - in INTRASTAT Reporting in VE07 when declaring for France, we are not able to see the INCOTERMS in the report, though it is present in the billing document.
    Can you please help me and see why this is happening and let me know?
    Thanks
    Raj

    Hi,
    Check the data that you have in table VEIAV.
    If the data are incomplete, and the volume of data that you must correct is so massive to correct it manually, you can complete it with enhancement FTGOVSEL (read the Note 303984 - Correct use of EXIT_SAPLV50G_001 and EXIT_SAPLV50G_002)
    Check all step in your customizing. Althought it's for Romania, Note 1016386 - Intrastat for Romania will help you, it add an append with a document with all steps.
    I hope this helps you
    Regards,
    Eduardo

  • Default Incoterms & terms of payment - PO

    Hi Experts,
    I have created the SC with prefered vendor, which will converted to fixed vendor later in SC using the doc change BADI.
    But the issue is there when the SC is converted into PO after approval, not populated with default incoterms and terms of payment from vendor master.
    However it is defaulting correctly when the PO is being created from the SC with contract and changing the vendor of the PO.
    Can any one let me know the cause for this issue?
    <<Text removed by moderator>>
    SRM 5.0 (SRM_SERVER 5.5) - ECS, SP - SAPKIBKT14
    Thanks & Regards,
    Pushparaj S.
    Edited by: Matt on Oct 26, 2010 9:07 AM

    >
    Pushparaj Susaraj wrote:
    > Hi Muthu,
    >
    >
    > This is for your information that my SC & PO has both prefered vendor 39 & fixed vendor 19 in BBP_PD. Is it correct?   -
    it is due to your logic 39 to 19 conversion logic
    deactivate change badi and create sc you can see only 39 .
    > One more information, that there is no payment terms & incoterms in PO, when I create SC from internal catalog and then PO.
    -- the vendor data  has purchase organisation / payment terms and inforecord .kindly check this combination existing for that vendor in manage business parter tranasation in the web.
    >
    > Thanks & Regards,
    > Pushparaj S.

  • Incoterm to be derived from Ship to party in sales order creation via va02

    Hi Experts,
    I have a requirement.
    When a new sales order is created from the screen va02, the inco term flows from the sold to party.
    It should infact flow from the ship to party.
    So standard SAP  SAP derives the incoterms from the sold-to -party when creating saloes order from the va02 screen.
    we should implement user exit for this.
    I just did a little bit of search and got the info that the euxt should be done in MV45AFZZ. in the FORM USEREXIT_MOVE_FIELD_TO_VBKD
    If anyone has worked on this please share your code details of things to be considered.
    Regs,
    SuryaD.

    Hi Experts,
    Found the solution.
    TCode SE38,
    In program MV45AFZZ, in FORM USEREXIT_MOVE_FIELD_TO_VBKD:
    IF us_posnr = 0 AND svbkd-tabix GT 0 AND NOT kuwev-inco1 IS INITIAL.
        vbkd-inco1 = kuwev-inco1.
        vbkd-inco2 = kuwev-inco2.
    ENDIF.
    SVBKD_TABIX = 0 means that you are in the creation mode (VA01),
    SVBKD_TABIX>0 means we are in the change mode(VA02)
    US_POSNR = 0 means that there is no position number for the item yet.
    Regs,
    SuryaD.

  • Incoterms are not getting copied at the item level

    HI Gurus,
    I have an sales order where If we change the Incoterms at the header level, its not getting copied at the line Items. Its giving an information mesage stating, Header Business Data does not apply to Item.
    The Incoterms are intially getting copied from Customer master, but later I am not able to change it.
    Please let me know what might be the reasons ? If possible Please let me know some User exits which needs to be checked.
    Thanks,
    Swathi

    Check in VOV8 for your sale order type the following:-
    a)  If both Check Division and Item division are ticked, then system will pop up this message due to the fact that in the said sale order, the item division differs from header division
    b)  The field "ProdAttr.messages" should be blank
    Next go to VOV7, select your item category and execute.  There ensure that the box is ticked for "Business item".  If this is unticked, then system will copy all header data to line item and you cannot change it.
    thanks
    G. Lakshmipathi

  • Incoterms in Intercompany Billing Document

    My Dear SAP Mentors,
    Can you please let me know that from where in "Purchase Order" incoterm appears at item level...
    In the concerned PO at Header level there is a seperate incoterm for e.g. DDP Jyderup...I know this comes from the vendor master record.
    There are two items in the concerned PO...
    I am confused as when I go to item details Delivery tab then for one Material say 212244 incoterm comes as DDU gebze and for another Material say 253264 incoterm comes as EXW Poland.
    1) Any idea from where this is coming...?
    2) Which incoterm should appear at the intercompany billing document ?
    3) Is it correct to have a incoterm from customer master record (Ship to party) in the intercompany billing document.
    4) Else please let me know the standard setup or incoterm get affected by copy control in documents.
    Requesting you all to kindly help me on above queries...
    Best answers would be appreciated by full points...
    Thank You !
    Best Regards,
    Anubhav

    Hi,
    1) Any idea from where this is coming...?
    - This could be from Info record. Use T.code ME12 to check the inco term for the particular vendor + material combinations. You can view the details under Purchase organization data1.
    2) Which incoterm should appear at the intercompany billing document ?
    - Ship-to party inco term.
    3) Is it correct to have a incoterm from customer master record (Ship to party) in the intercompany billing document.
    - This is correct
    Regards,

  • Change incoterms for delivery at creation of return purchase order

    Hi all,
    When we create a PO with a return item we always create a delivery to post the goods issue. Therefore we've to create a customer from the vendor master record. In the customer master record the incoterms are defined. But sometimes the incoterms for the return items are different.
    Is there a way to set the incoterms in the purchase order that is taken over in the delivery? This is possible with the shipping conditions (shipping tab in PO).
    Regards,
    Maarten

    Hi Adithya,
    I too facing the same kind of requirement, can u please let me know how you achieved sending multiple idocs.
    Thanks,
    Kashif

  • EXIT/BADI for ME31L and ME31K for changing Incoterms in header and item

    Hi All,
    I am facing an issue in ME31L,ME32L transactions.
    In vendor master , incoterm is maintained .So whenever a PO is created with particular vendor, the same incoterm(EKKO-INCO1& EKKO-INCO2) will get defaulted into PO as well. Now i need to change the incoterms2 on basis of some logic, but i was not able to find the correct BADI/EXIT to do these changes.
    This relation can be seen in vendor master partner profile.
    SO if I create a PO/SA with a vendor and goods supplier is different the incoterm from vendor is getting defaulted there, not from goods supplier .
    So am looking for any EXIT/BADI which will enable changing of Incoterms2 based on the incoterms1 value.
    Thanking you in advance.
    satheesh

    HI Sharma,
    Thank you for your response.
    This particular BADI ME_PURCHDOC_POSTED is getting triggered when i am creating a SA in ME31L but when I am changing the values in the BADI that is not getting updated on the screen.
    thanks,
    satheesh

  • EXIT_SAPMM06E_012 : Incoterms validation for header/item in a PO.

    Hi,
    I need to add validation to PO that :
    The header level incoterm 1 and 2 and the items incoterm1 and 2 has to be populated by the user, for PO create(ME21n) and change (ME22n)
    modes.
    THe header level inocterm field validations were done in Change mode(ME22n) using the i_ekko in EXIT_SAPMM06E_012.
    But i'm not able to do this, for the item level incorterms. I cant find which table holds the incoterm data for items.
    Also, please let me know how to do it when the PO is in create mode. Can EXIT_SAPMM06E_012 be used?
    and which internal table will have the inco terms for header and item data , when in create mode.
    Thanks in advance ,
    Shyam.

    Hi
    Try with BADI ME_PROCESS_PO_CUST method CHECK.
    Regards
    Eduardo

  • Wrong Incoterms during creation of intercompany performa invoice

    The incoterm in the sales order is indeed DSA , at the time of creation of  "Intercompany" proforma invoice (ZF8V type)  the incoterms comes as ddl which is the proforma invoice between the company owning the stock (1010) and the "selling" company code (2010).
    Customer 1010 in sales area 3020 - 04 - 99 has incoterm DDL
    at the time of creation of F2 invoice the incoterms comes same as as on the order but in performa invoice its comes different from sales order
    Kindly suggest

    Hi,
    Inco terms are always customer specific.
    Inco terms selected at the billing document are from the Sales Order and at Sales Order from Customer Master.
    As sales order Customer is your actual customer hence billing happened to the actual customer will pick the same Inco terms.
    At the time of Intercompany Billing Your ordering Sales-Organizations becomes the customer.
    If your ordering Sales-Organization Customer has different Inco terms, system will by default pick the same.
    Thank You,
    RB.

  • Incoterms in PO line item

    Hi,
    As the Vendor Inco terms in PO header is getting populated from the
    vendor master...similarly Inco terms in PO Line item gets populated fromArticle PIR...If its blank then it doesnt get any value & if the same is maintain in PIR manually then Incoterms does reflects in the PO line item.
    I have got couple of info which was quite relevantto my query i.e
    (the incoterms at item level is item specific, U can mutually agree uponcertain incoterms with a vendor for some materials. But when u make a
    single Po for many item (and there cud be items fr which the incoterms
    are different and not yet settled with vendor ) - thus incoterms itemwise
    cam also be maintained.) & (If you enter an Incoterm on header level,
    this is valid for all items that do not explicitly have an Incoterm.If
    you then enter an Incoterm on item level, this overwrites the Incoterm
    entered on header level.)
    But still need few more details...e.g when we create a PIR(with
    combination of vendor,article & pur org thru ME11 @ that time why systemdoesn't picks up the Vendor Incoterms is there any setting which allows
    the values to flow at the time of creation of PIR. Or it has some
    specific reasons where its intentionally does not flow while creating PIR.
    Coz i have checked manually entering Incoterms in ME11/ME12, then it
    flows in the PO line item level directly.
    Also how could we get the PO Header Incoterms & PO Line item incoterms
    reflecting similar.
    Need your help ASAP as this has an impact on the process mapped by
    mapping ZOne wise Warehouse for bettercontrol which is critical.
    Please help...
    Thanx in advance..
    Regards,
    Sonal D
    9322185889

    Hi Sonal ,
    Even i hav the same requirement that Incoterm field in  me21n while creating purchase order at Header level needs to get reflected at item level too.
    Is it the development or Customisation?
    Can u please  explain me how did u go abt it?

Maybe you are looking for