Increase rows when refresh in a Workbook

Hello!
I hope you can help me.
I have a workbook with severals queries. Also I have 8 or 9 formulas into my workbook. When I refresh it, if I choose other month, some rows increase or decrease and so the formulas don´t work and workbook breaks.
I´ve think insert any code made with visual Basic.
Thanks and sorry for my english.
Edited by: José Luis López on Jun 24, 2008 9:47 AM

Hello,
Assuming you want to accumulate the data, the pseudo code is as follows:
i = first line of data
c = column of key figure
r = column to check if end of data has been reached
a = 0
while (cell(i,r).value<>"")
a = a + cell(i,c).value
wend
Then you can do whatever you want with thre result: use it in further calculations in VBA or just put it into a cell (which may be used in Excel formulas). If you are not familiar with the VBA syntax, you can read about it in the Microsoft Visual Basic Help included in Excel.
You can put this VBA code into the empty SAPBEXonrefresh function if you want it to be automatically run after each refresh. Here you can also get the resultarea directly, instead of using a reference column as I have done. You can get some information in the library: [http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm] (under Exits). I've never used this as I have only created macros which have been executed by the user.
Regards,
Christoffer

Similar Messages

Poor performance when refreshing BEx Analyzer workbook

We have a BEx Analyzer workbook that consists of about 10 worksheets, each displaying data from a different query. Refreshing the workbook in BEx Analyzer takes a very long time, typically 20 minutes or so. During this refresh process there is very little activity on the BW system itself. Each individual query runs on the web in a few seconds. Aggregates have been built for every query in the workbook.
The workbook's file size has also increased from ~2MB to 15MB as changes are made to the workbook.
Any suggestions on how to improve workbook performance would be helpful.
Thanks,
Jason Kraft

Hi Jason,
On the file size, I recommend a VBA macro which reformats the sheets for you, particularly getting rid of use of colour as much as possible.
The portal performance and the BEx Analyzer performance may be dependent on different servers. It could be that the BEx Analyzer is using the local machines CPU power. Just monitor CPU usage during idle times, opening of BEx and then refresh of the query data to see the demand.
The portal on the other hand could use an entirely different server which has more CPU power and capacity than the platform that Analyzer is being run on.
Incidentally, 20 minutes wait for a workbook with 10 sheets isn't necessarily a huge waiting time if these queries are returning many rows.

Error when refreshing workbook in BEx: Specific Macro CallBack not found

One of our users is getting the following error when refreshing any BEx workbook (in BI7):
Problems while calling the exit on refresh: Specified Macro 'CallBack' is not found in the workbook
This error suddenly started this week, everything was fine before that, and no changes have been made to the user's PC. The problem is specific to this one user's PC.
Any ideas?
-Jason

Hi,
It seems a common error.
There is a note that mentions the error, and was fixed since BI addons SP 8
Note: 1267942 - Custom macro not being executed on a workbook
Download and test the latest version: bi710sp12_1200-10004472.exe
This should fix the issue.
FYI: SAPGUI 640 is not supported by SAP since 2008. If you are using this version, please download the SAPGUI 7.10 as well.
Thanks
Edward John

The hidden columns of wrokbook will appear when refresh the workbook

Hi,expert.
I create a query,the query has 3 columns,
Fields Name: Col_A, Col_B, Col_C
Fields Value: 1001.....001 ... X
I want to connect the Col_B and Col_C, so I add a column Col_D, like this:
Fields Name: Col_A, Col_B, Col_C, Col_D
Fields Value: 1001 ... 001 .. ..X .... ..001X
and then I hidden Col_B and Col_C in the excel. save the query as a workbook.
When I open the workbook,and refresh it,the hidden Col_B and Col_C were appear.
PLZ tell me how to hide the columns Col_B and Col_C, If I refresh the workbook,they will be hidden either.
My BEX Analyzer version is BI AddOn 7.x(based on 7.10), Support package 8, Revison 1408.
TKS.
Edited by: Bruce Wang on Jul 26, 2010 11:28 AM
Edited by: Bruce Wang on Jul 26, 2010 11:29 AM

Hello Bruce,
As mentioned by others.
If it is possible, try to hide these two columns in the query designer.
If there are few calculaions need to be done in excel with these fields, then include a macro to the hide these columns.
You need to include the code to hide these columns to the exit macro 'call back'.
Hope this helps.
Regards,
Hari

Workbook when refreshed loosing formatting

Hi All,
We have a workbook when run giving data properly, but the same when refreshed loosing the formatting. i.e. the data is being displayed but the cells are not highlighted and colours of the cells not displayed etc.
Please let me know if anyone faced similar issue and the solution.
Thanks
Hima Bindu

Hi Veerendra,
It Worked with small changes.
I had to go to the design mode of the Workbook. Right click on the Analysis Grid-> Properties -> Check the box Apply Formatting
and save the workbook.
Thanks a lot.
Hima Bindu

How to auto scroll a table to last row when using Active Data Service? 11g

Hi all,
Has anyone got any experience with the ADF Active Data Service?
I am using an af:table in combination with the ADF Active Data Service and I want the table to scroll to the latest row when new data arrives.
It is basically a simple setup:
The value attribute of my table points to a bean that extends CollectionModel and implements ActiveDataModel. This works perfectly. A soon as I receive new data in my bean, the table is automatically updated (e.g. a new row is inserted). I use JDev version: 11.1.1.3
The problem is that I can not get the scroll bar to move down to the last row automatically when new data arrives. The auto scroll only works for the client that actually performs a submit. In other words the person that submits the new data, will see his scrollbar move down, this is because I added the following code:
RowKeySet rowkeysset = chatTableBinding.getSelectedRowKeys();
rowkeysset.clear();
rowkeysset.add(getRowKey());
AdfFacesContext.getCurrentInstance().addPartialTarget(this.chatTableBinding);
This does not work for the clients that receive the new data via the Active data model. Apparently the active data service partially refreshes the table, but not in such a way that it sets the selected row to the last row?
My table definition:
<af:table value="#{pageFlowScope.chatBean.instantMessagingChatwindowBean}" var="row"
id="t1" columnStretching="last" rows="10"
styleClass="AFStretchWidth" autoHeightRows="10" contentDelivery="immediate"
horizontalGridVisible="false"
verticalGridVisible="false"
disableColumnReordering="true" displayRow="last"
rowSelection="single"
binding="#{pageFlowScope.chatBean.instantMessagingChatwindowBean.chatTableBinding}"
inlineStyle="height:80px;">
p.s.
The table is used to show incoming chat message.
I am building a chat client (taskflow) in a Webcenter application. The concept is similar of that presented by Lucas Jellemain in his blogpost on building a Google Talk Client http://www.oracle.com/technetwork/articles/jellema-googletalk-094343.html

Dan,
This is a thanks for posting your findings. You saved me quite some time.
<af:selectBooleanCheckbox id="showOnlyActiveSubscriptions" selected="true"
label="Show only active services:"
value="#{servicePortfolioBean.showOnlyActiveSubscriptions}"
autoSubmit="true" />
<af:table binding="#{servicePortfolioBean.serviceTable}" ...
partialTriggers="showOnlyActiveSubscriptions">
Of course, when I add a "ValueChangeListener" to the selectBooleanCheckbox, the PPR stops working. :( I wonder why?

BPS limitation of 50 rows when doing Copy Paste in BPS BI 7.0 Layouts

Hi,
Does anybody knows if the limitation of 50 rows when doing Copy Paste in Layouts still exist in BI 7.0 SEM-BPS ?
Thanks!
Pat.

Patrice,
     The limitation is this is how many records you could enter at a time.You can
     always hit REFRESH and enter more records to save all of them at a time.If
     you had changed your UPP_FRONT_SPREADS_DUMMIES setting to 150, try
     inserting (copying) 160 records into your layout.For simplistic reasons you
     could change the setting to 2 and verify if you could enter 3 records without
     hitting SAVE or REFRESH.I would recommend sand-box for these activities.
     Hope this helps.
Cheers
Srini

When refreshing browser

HI....
I am facing the problem when refreshing the browser.
Eg:
if we have one webpage which have feilds like name and dataofbirth.if we enter the data and submit it the data will be insert into the database.if i refresh the browser then again the same data is inserting into database.how many times i am refreshing the webpage those many times the operation is performing and so many rows are inserting into database with same data.How to restrict this... how to restrict updation of database with previous feilds data when page get refreshed...pls help in this..its little bit urgent

I utilize 3 techniques to prevent double posts:
1. I disable the submit button prior to submitting the page (via javascript). If you do this, note that the button name is NOT submitted with the page parameters.
2. Redirection after the POST to the target page.
3. Add a unique request ID to each POST page. Store submitted unique ID's in an application level collection, and then if that ID is seen again, throw a "page already submitted exception".
Option 1 works well on the client side. But it doesn't prevent the user from right clicking and hitting "refresh" on the result page. Option 2 prevents the right click, refresh. However, at any time, a user can hit Back-Back-Back to get to your form again, at which time they may try to re-submit. For those cases, I also add option #3.
For option 3, I typically put a field such as:
<input type="hidden" name="uniquerequestid" value="<%=strUniqueValue%>">
Every time a request comes through my main handler, I look for the "uniquerequestid" parameter, and if found I check to see if the value has already been submitted. If it hasn't, I add the value to the list of values. If it has, I throw an exception and take the user to a page that says "This page has already been submitted".
Note that the unique request cache list must be stored in the application level, NOT the user session level, else users could hit back as many times as necessary, even when logged in via another user. So I don't store this data in the session.
I then clear my cache list ever few hours, leaving in the most recent ones, and getting rid of old ones.
Hope that helps!
Michael

TS3899 I have an iPhone 5 and it shows on the Mail Icon that I have over 3,000 emails to read but the number continues to increase even when I have read the email. I thought once you have read an email it drops off the count of "new emails"

I have an iPhone 5 and it shows on the Mail Icon that I have over 3,000 emails to read but the number continues to increase even when I have read the email. I thought once you have read an email it drops off the count of "new emails"

The received emails should show in two locations:
1. In the All Inboxes tab of Mail.
2. The Inbox for each mail account,
If your emails are not showing in these locations try quitting the mail app and then reset your iPhone.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal.
To reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Merging multiple rows in to a single row (when rows meet merging criteria)

Hi
I have a scenario to merge multiple rows in to a single rows when the data in those rows fall in merge criteria .Below is how my data is
Now the merging logic for the above rows is , we need to combine multiple rows in to a single row when the data in those rows permits us to do in that way. Simply saying , its like sandwich where we combine multiple things to a single piece.The output for
the above rows should be
Here we combined Row 1 ,2, 3 in to a single row as the data in those rows permits to merge in to single row. But the row 4 cannot be combined to any of those rows because the data in those rows doesn't permits us do a merge ( As the value of the column
JobSource for the row 4 is different from the other rows ) .
My original data has 56 columns , but for readability i kept only 9 columns.
can you please throw some idea on how to achieve this scenario. I know we need to use CTE for achieving this, but i am not able succeed in doing an iteration on multiple rows.
Appreciate your response .

Thanks for your reply .
Rule for merging is simple . First of all there is no unique row identifier for each row , the fact table is not having an identity column in the database . I called row 1 , row 2 etc in my post above only to make better explanation of my scenario.
The rule for merge is below.
1) we can combine only when the data in a column for one row is null & the data in same column for the other row is not null . It should also satisfy the condition where the data in other columns should conflict each other.
2) Data for all columns for the merging rows should not be conflicting (i.e. we should not merge the rows when the data in a column is not equal to the same column in the other row
,considering not null value)
Steps in merging the above source data :
1) Consider the case of row 1 and row 2 in the source, we can combine these rows as the data is satisfying the rule 1 for columns (Jobsource,Flight, Package,Update,Iscancelled
,Result, Severity) and columns (JobID and RuleName ) fall under rule 2. we merge these two rows in to a single row and keep in that in the table.
2) Then the resulting row is again merged with the second row which is present above by applying the rule 1 and rule 2 . Below would be output of merge operation.
Now there would be only two rows in the output . But these rows cannot be merged as the data doesn't satisfy the merge rules 2 . As Jobsource for the row 1 in the above output is "PresubmissionSource" which is not equal
to "PostSubmission" jobSource which is in row 2. So these two rows are left unmerged .So the above two rows would be the output of merge operation on my source data.
This process has to be repeated for all the rows in the table. As of now my table as 92 Million rows with 56 columns which need to be considered for merging rows. I replicated my scenario in 9 columns and 4 rows to understand better.

Error when refreshing WEBI report with Universe Connection Type "SSO"

Hi Experts:
We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
However got the error of "incomplete logon data" after all the configurations done following below blogs:
SNC Part 1
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
SNC Part 2
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
The SNC settings are:
- AD Account: service.test.bobj (all lower-letters)
- 32-bit gsslib on the BO server, and 64 bit on the BW server side.
- SNC0: p:service.test.bobj at DOMAIN
- SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
- Entitlement system tab --> username: BO_Service
SNC Name: p:service.test.bobj at DOMAIN
- SNC settings tab:
SNC Lib: c:\winnt\gsskrb5.dll
Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
I found a few threads on the same topic, but they are all not answered:
SNC Client side configuration error
SNC Configuration Error: Incomplete logon Data
Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
Thanks in advance!
Regards,
Jonathan

Hi Ingo,
Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
What we did is:
1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
Can you please help? Thanks a lot!
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService

Error message when opening a shared workbook with Excel 2007

Hello,
We would like to share a workbook outside BW (by saving into a serveur).Since we use Excel 2007, we can't anymore open this workbook.
We have a message error (see bellow).
For your information, it was ok with Excel 2003.
When whe save the workbook in local disk and then copy from local disk
to a serveur, it's ok.
We use SAPGUI 7.10 support package 8, patch 1 Revision 1443 & BI 7.0.
Best regards
Nicolas Triqnuand

hey Nicolas,
first of all, your error message is in French... not too many people out there will be able to understand. Eventhough I do understand French, it doesn't make much sense to me... BUT... in Excel2007 all macro's are by default disabled. When you enable them (you should get a "Security Warning" right under "the Ribbon"), your BI stuff should work again.
Just gave it a try, and it runs smoothly over here.
Cheers,
RafB

Error when refreshing web intelligence document less then every minute

Hi all,
I get the following error, when refreshing document via javascript more often then every minute:
Server Error in '/Dashboard' Application.
FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: BusinessObjects.Enterprise.OcaFramework.ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
Source Error:
Line 121:
Line 122:                    //Session["StorageToken" + strDocId] = doc.StorageToken;
Line 123:               doc = reportEngine.OpenDocument(intDocID);
Line 124:               //doc = reportEngine.GetDocumentFromStorageToken(storageToken);
Line 125:               doc.Refresh();
Source File: c:\inetpub\wwwroot\dashboard\document.aspx.cs    Line: 123
Stack Trace:
[ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
   at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)]
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA._WICDZProxy.initInstance(Byte[] p0, UTF8StringHolder p1)
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
[CommunicationException: The Web Intelligence server could not be reached. Contact your Business Objects administrator. (Error: RWI 00236)]
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
   BusinessObjects.ReportEngine.WI.Internal.Server.ServerCaller.InitInstance(String clientInfo)
   BusinessObjects.ReportEngine.WI.Internal.WIDocumentInstance..ctor(WIReportEngine engine, Int32 documentId)
   BusinessObjects.ReportEngine.WI.Internal.WIReportEngine.OpenDocument(Int32 documentId)
   Dashboard.document.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\dashboard\document.aspx.cs:123
   System.Web.UI.Control.OnLoad(EventArgs e)
   System.Web.UI.Control.LoadRecursive()
   System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.2407; ASP.NET Version:1.1.4322.2407
I searched forum and google for this error, but I didn't find anything. Did you heard of this error? How can I fix it?
My BO Version is BusinessObjects Enterprise XI (without any ServicePacks). Is there a SP which fix this error?
Thank you for every idea!!!

Hi,
Copy File from Client system to server in same folder location .
Make sure in Edit Query option Editable & Refreshable options are checked .
Please check the links below .
Webi Excel Personal Data Provider Dynamic Data
How to create a webi report using excel as source
Excel as datasource in Infoview
Excel source located in Infoview

How can i select the next column instead of next row when press enter key

I need to know how can i select the next column instead of next row when i press the enter key.By default ,when i press enter key the next row is selected and the column remain unchanged but I wants opposite that is the row should remain unchanged but column index will changed.
Thanks to all.

Well, the right arrow key will already move you to the next column, so the easiest way to do this is to modify the InputMap to have the Enter key invoke the same Action as the right arrow key.
You can search the forum for my "Table Actions" (without the space) example that will show you how to do this.

Get AccessControlException(access denied) when refresh page

Our applet have AccessControlException when refresh the ie browser but the first time open no such a problem! And when we use other host which use a different proxy no such a problem either. Don't know why , is it the problem of proxy?
any idea ? many thanks!
here is the log:
INFO - Wed Jan 16 16:09:30 EST 2008: getResponseTime Debug1-- openConnection time: 0ms
network: Connecting https://hostname/_en.html with proxy=HTTP @ proxyname:8080
network: Connecting https://hostname/_en.html with cookie "BCSI-CSA1021104=2"
INFO - Wed Jan 16 16:09:34 EST 2008: getResponseTime Debug3-- getInputStream time: 4500ms
liveconnect: Invoking JS method: ua
INFO - Wed Jan 16 16:09:34 EST 2008: Log page URL -- https://hostname/result.html?timestamp=Wed Jan 16 16:09:34 EST 2008&ip=''&jvm=Sun Microsystems Inc.,1.5.0_14&os=Windows XP,5.1&echo_time=4500ms&UserAgent=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
INFO - Wed Jan 16 16:09:34 EST 2008: logUsrInfo Debug5-- openConnection time: 0ms
INFO - Wed Jan 16 16:09:34 EST 2008: JVM version checking passed!
+(the first time open page can pass!)+
liveconnect: Invoking JS method: showApplication
basic: Stopping applet ...
basic: Finding information ...
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@134e4fb, refcount=0
basic: Caching classloader: sun.plugin.ClassLoaderInfo@134e4fb
basic: Current classloader cache size: 1
basic: Done ...
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter@1be0f0a
basic: Joining applet thread ...
basic: Destroying applet ...
basic: Disposing applet ...
basic: Joined applet thread ...
basic: Unregistered modality listener
basic: Quiting applet ...
basic: Registered modality listener
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URL
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@134e4fb, refcount=1
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@50988
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@134e4fb, refcount=2
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@134e4fb, refcount=1
INFO - Wed Jan 16 16:09:44 EST 2008: getResponseTime Debug1-- openConnection time: 0ms
network: Connecting https://hostname/fx-canada/login_detail_fr-ca.html with proxy=HTTP @ proxyname/
network: Server https://hostname/fx-canada/login_detail_fr-ca.html requesting to set-cookie with "BCSI-CSA1021104=2; Path=/"
INFO - Wed Jan 16 16:09:48 EST 2008: getResponseTime Debug4-- throw exception time: 4515ms
WARN - Wed Jan 16 16:09:48 EST 2008: Cannot get system response time!
java.security.AccessControlException: access denied (java.net.SocketPermission hostname:8080 connect,resolve)
at java.security.AccessControlContext.checkPermission(Unknown Source)
at java.security.AccessController.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.proxiedConnect(Unknown Source)

The security credentials for a JMS "send" operation are not taken from the username and password that you pass to the "createConnection" method, but from the security login context in effect when you call "send". So, if you want this to happen using a particular security context, you need to make sure that you have set this up before you make the call.
There are a number of ways to do this in WLS. Your best bet would be to check the security documentation, or do ask on the security newsgroup for the best way to do this in 8.1.

Increase rows when refresh in a Workbook

Similar Messages

Maybe you are looking for