Increase the call depth in JRA data
It seems that by default, I can only access 15 levels of call stacks for one method's callers in JRA data. Does any of you know how I can increase the call depth in JRA call stack?
Thanks much!!
Unfortunately you cannot change that value. I'll put it on the list of things we want to do for the next version, though.
Thanks for letting us know,
/Staffan
Similar Messages
-
Please increase the call log history !! Its really important
Increasing the call log would add a great benifit to the iphone,
You can add this feature as an option, and it can be used if needed.
Thank youYou can provide feed back to Apple's engineering department, by going to www.apple.com/feedback.
-
how i can increase the volume when i playing a video? dont showing the volume control in the video player..
Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.
-
How do I increase the precision of a timestamp acquired with a DAQ task?
Hi
I am using a DAQ task to acquire multiple channels of analog data. The waveform data already has timing information incorporated into it. I wanted to know if there was a way of increasing the accuracy of this timestamp information - (Its currently in seconds with a default ms offset for each sample).
Thanks
BrindaHello Brinda,
From your posting, it sounds like you are acquiring some waveform data and plotting it to a LabVIEW graph. Unfortunately, the ability to increase the timestamp of your acquired data is going to be a limitation of using a non-real time operating system such as Windows. You may have a device which can sample to some very small precision of accuracy, but if your OS is not able to transfer the data fast enough and timestamp it, then you will see a less precise timestamp than you were hoping. A workaround to get around this would be to use a real time environment and the LabVIEW Real Time module. If this does not seem to be an option, you may also want to consider trying to use a counter to perform the timestamping, or take a look at the LabVIEW exam
ple program I have linked to below.
Timestamping Analog Input Data Using a Counter (DAQ-STC)
Precise Current Timestamp with Milliseconds
Best of luck.
Jared A -
Hi, i hav an Iphone 4S (ios 7.1) with me.. it is abnormally increasing its temperature due to no reason and i am really worried about that. The fully charged phone is getting empty within minutes. Not able to attend the calls due to its overheating. help me please..
It shows a 'temperature rise, need to cool down your phone' message regularly.. It happens when i when i try to connect my fone to the internet using cellular data, and it happens more suddenly when my 3g is on.. help me to sort out this, pleaseMake an appointment with the Apple genius bar for an evaluation.
-
Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha
Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
/// <summary>
/// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
/// determine whether or not the entity class should be generated.
/// </summary>
public class CodeWriterFilter : ICodeWriterFilterService
//list of entity names to generate classes for.
private HashSet<string> _validEntities = new HashSet<string>();
//reference to the default service.
private ICodeWriterFilterService _defaultService = null;
/// <summary>
/// constructor
/// </summary>
/// <param name="defaultService">default
implementation</param>
public CodeWriterFilter( ICodeWriterFilterService defaultService )
this._defaultService = defaultService;
LoadFilterData();
/// <summary>
/// loads the entity filter data from the filter.xml file
/// </summary>
private void LoadFilterData()
XElement xml = XElement.Load("filter.xml");
XElement entitiesElement = xml.Element("entities");
foreach (XElement entityElement in entitiesElement.Elements("entity"))
_validEntities.Add(entityElement.Value.ToLowerInvariant());
/// <summary>
/// /Use filter entity list to determine if the entity class should be generated.
/// </summary>
public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
//All other methods just use default implementation:
public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
return _defaultService.GenerateAttribute(attributeMetadata, services);
public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
return _defaultService.GenerateOption(optionMetadata, services);
public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
return _defaultService.GenerateOptionSet(optionSetMetadata, services);
public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
public bool GenerateServiceContext(IServiceProvider services)
return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
<entity>systemuser</entity>
<entity>team</entity>
<entity>role</entity>
<entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you. -
I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?
On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young -
How to get data from the called program using SUBMIT in a background job?
Hi Experts,
I've a program which creates a background job using JOB_OPEN and JOB_CLOSE function modules.
Between the above function modules I need to call a program using SUBMIT VIA JOB statement.
My problem is, How do I fetch some data in an internal table in the called program to the calling program after the SUBMIT statement?
I tried to EXPORT and IMPORT the data, but they are giving a failed sy-subrc when using this background job.
Kindly let me know your inputs and valuable suggestions.Kumar,
When we execute a program as a background job then the output will be sent to Spool which needs to be fetched again.I guess we need to use Submit via spool as mentioned by Rajat.
Check these threads to get some idea
submit report to spool & import spool id
Re: Generate Spool for a report
K.Kiran. -
I have a main program where I call a sub-vi. In this sub-vi, there is a while loop that is used to wait for commands in the sub-vi. While the while loop is running, I cannot continue with normal operation of the main program. I would like get the sub-vi to run independently once it has been called, but not hold up the main program. As well, I need to still be able to send data to the sub-vi
One way is to use VI Server, which has been mentioned by others. This will allow you to start another VI (by name) and run it entirely independently of the calling VI. This is a good way to start various independent VIs from a main menu, for example. None of the VIs thus called need have any connection to the others.
Another way it to have the SubVI in a separate while loop on the calling VI's BD. Then, use a local var to start this sub VI from the main loop. The calling VI sets a local START bit and continues running. The sub VI's while loop watches for this START bit to go true, and then runs the Sub VI. The advantage here is that one can more easily pass arguments to the SubVI when it is started, using local vars, which are preferable to globals. Once the Su
bVI is running, however, you must use a global Stop Bit, set in the calling VI, to stop it when the calling VI exits, or the calling VI will hang up, waiting for the Sub VI to close and exit its while loop.
If you need an example of this, email me. ([email protected]). I can also recommend Gary W. Johnson's excellent book which discusses this. ("LabVIEW Graphical Programming", 2nd Ed).
Note: Where possible, I try to call a subvi from within the main VI, wait till it is done, then continue. It avoids the use of locals & globals, and results in cleaner code, with fewer "race" conditions. However, the main VI stops until the subVI is done, hence one should make the subVI modal. -
How do I increase the length in data file
I have been getting this error, can anyone tell me why I'm getting the error below and help me fix the the error( increase the length of data file.
This is my Control file
LOAD DATA
INFILE Job.dat
APPEND INTO TABLE job
FIELDS TERMINATED BY x'09'
(PositionID, jobID, title, code, family)
This is my data in my data file
PositionID JobID Title Code family
50003490 1 NULL 001610 NULL
50004865 1 NULL 001615 NULL
ERROR
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Jul 13 10:17:33 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: Position1.ctl
Data File: Job.dat
Bad File: Job.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table JOB, loaded from every logical record.
Insert option in effect for this table: APPEND
Column Name Position Len Term Encl Datatype
POSITIONID FIRST * WHT CHARACTER
JOBID NEXT * WHT CHARACTER
TITLE NEXT * WHT CHARACTER
CODE NEXT * WHT CHARACTER
FAMILY NEXT * WHT CHARACTER
Record 1: Rejected - Error on table JOB, column POSITIONID.
Field in data file exceeds maximum length
Record 2: Rejected - Error on table JOB, column POSITIONID.
Field in data file exceeds maximum length
Record 3: Rejected - Error on table JOB, column POSITIONID.
Field in data file exceeds maximum length
Record 4: Rejected - Error on table JOB, column POSITIONID.this is the structure of my table
create table job (PositionID number(20) not null,
jobID number(20) not null, title nvarchar2(255), code nvarchar2(255), family nvarchar2(255),
constraint job primary key (PositionID, jobID))
organization index
Tablespace Position
pctthreshold 20
overflow tablespace users;
comment on table job is 'This table defines the job(s) associated with the position. There can be multiple jobs allowed although the preferred business rule is for one job per position.';
alter table job add constraint FKjob373174 foreign key (PositionID) references Position; -
How to increase the size of the Data file?
There are two factors afftecting the datafile size. One is the block_size, the other is the MAX_Blocks. How can I increase these two number to increase the datafile size?
I am building the raster dataset. And I have several terabyte images. But currently, my max datafile size is just 32G.
Help me, pls.
Thanksk,Thanks, first.
I sure definitely sure to increase the datafile size to more than 50GB. I am creating Raster Database. It's about 4 TB. If I can not have the bigger size datafile, I need to create so many small size datafiles.
Where is the setting for the MAX_BLOCKS? If I can not change this setting, can I change the BLOCK_SIZE?
There is a document: http://www.remote-dba.net/10g_45.htm. How can I get what he means MAXIMUM DATA FILE SIZE?
Thank you so much. -
How to increase the number of data Business Object can pull for a report?
Hi,
I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
ThanksBobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti. -
How to increase the number of processes taken for loading data?
Hi,
While loading data from R/3 to BW, we found that the particular load is taking 2 processes to load data into Cube.
Is there anyway to increase the number to 4 ?
Thanks in advance.
Bobby.Bobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti. -
How can I increase the number of saved previously called numbers?
When I press the call key about 10 in/out called numbers show up. My old phone had like 50 previously called or received numbers. How can I increase the number of saved calls?
Unfortunately there is no such setting to increase number of saved calls on the device.
Message Edited by rafo on 15-05-2009 12:53 PM
if your issue solved set "Solution" mark at the relevant post -
How to increase the length of the char which has master data!
Hi,
I am uploading hierarchy from flat file!
i am using basic char texts as hierarchy texts and my basic char has length 15 )
Because the first 15 characters of the hierarchy short text are same, and it s total length being 15, while uploading it is giving me error saying same record values cannot be used more than once!
( i am using nodename as hierarchy texts and my basic char has length 15 )
when i try to increase the length of the char by deleting entries in it, the delete option is grayed out!
Any suggestions?
Thanks,
RaviHi,
Check it out that object where-used list, whether that object is used in any other cubes or ODS or any target......
If it is used then delete all the data from all the targets and also object data itself.
Then it is possible to increase the length.
One more thing is if you want to change in Production system directly ,may be you have the display authorization only.
You have to change it in to development system and trasport it to production system.
Regards,
Venkat
Maybe you are looking for
-
I'm attempting to submit a podcast through iTunes and keep getting this error. I've tried on two computers, one being a Mac and one PC. My RSS feed is here: http://www.whitewolfdental.com/wp-content/media/rss.xml If I go to File -> Subscribe to Podca
-
I cannot detect my wireless HP desk jet 3520 printer from my iPad?
-
Protected Flex field and Custom Views
Hi, I have created some project variables in oracle bpm 11.1.1.6.0 project.After deployment, these variables are coming as Protected flex field but for some reason these are not visible when I define custom views. I also tried creating Protected flex
-
Nokia 206 Medial player not working properly.
Dear all members, I have recenlty purchased a nokia 206 dual sim mobile. Some features in the phone are very good, but video player has some problems. If i play mp4 converted file 320*240 15fps file, it shows "this file could not play well in your
-
Problem while sync iphone: some contact disappear
Good morning at all, i have a problem while syncing my iphone with itunes. Itunes is the last release and iphone have the 6.1.2. Last week i connect the iphone to the Mac and, with suprise, i found that some of my new contacs added to my iphone is di