Increase web page size

I just bought an iMac 21.5 inch and when I browse webpages I noticed that the page doesn't fit onto the entire monitor. Rather, the webpage is centered in the middle with emptiness on both the right and left sides. Is there a way to maximize it so it fits the entire screen? The fonts, pictures, etc...are small for my liking. My previous 17 inch monitor with my PC was more spread out on the screen with bigger font size! Please help...I am starting to feel buyer's remorse....

Looks like you are on your way however Toolbar sizes cannot be changed unfortunately.
BTW when you're replying to a message please click Reply in the message you're replying to otherwise we can't tell who your communication is directed to.
Also as a recent MS Windows switcher I'd recommend bookmarking and using:
Mac 101, Switch 101, Find Out How Video tutorials & List of Useful URLs for switchers.

Similar Messages

How to customize my default web page size, i always need to reduce whenever my web page is opened which is cumbersome

when my web page opens it occupies in full screen and most of the objects getting hidden , hence i have to use the zoom function to reduce or increase the size of the page. instead if i am given an option to open my default size web page and later on my request i can adjust in the view tab it will be quiet helpful. that is in stead of 800x600 i can switch over to much reduced resoultion size and later adjust accordingly. the web page size must in a position to be kept saved, for every time i can open and customize time to time as per my wish.
hope you get my point!

The customization role is only used for applying MDS customization. In this role you cannot change your base application outside of MDS. You'll need to select a different role for regular development, including modifying xml documents.

Can I increase the page size in an existing PDF?

We have a PDF of a CAD drawing from a consultant. The problem is, the page size is letter, and we need it to be tabloid to accommodate a section of General Notes and a Cost Estimate table. We would rather not go back to the consultant both from a cost standpoint and from a time standpoint.
Is it possible to increase the page size within the PDF so that I have some blank space at top or bottom for the needed blocks?
I am using Adobe Acrobat X Pro.
Thanks!

Hi Mamie ,
Please refer to the following kb document and see if this helps.
https://helpx.adobe.com/acrobat/kb/scale-or-resize-printed-pages.html
Let us know how it goes.
Regards
Sukrit Dhingra

After you increase the page size with Ctrl/plus, is there a way to keep the new setting?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/845611]''
My new laptop has great features but a smaller screen. Changing the resolution makes everything look awful. Using Ctrl/plus to increase the page size in Firefox solves the problem, but you lose the new setting when you go to a different page. Is there a way to keep the new setting until you reverse it with Ctrl/minus ?

There are some add-ons that can be used to change the zoom level on all sites, for example:
* NoSquint - https://addons.mozilla.org/firefox/addon/nosquint
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level

Web Page Size Generated by Report

When I create a report, I have to decide the layout height/width
before run the report.
Is it possible to change the layout size programically ?
In addition, is it possible to show a web page programically ?
(e.g. if there is some error for the input from parameter form,
I want to show up a small web page for warning instead of show
up the default report server warning page)
Rgds,
Edward
null

http://www.msn.com
null

Web page size

hi, just made the switch....its been fun and frusterating. i bought the 24 inch i mac. when i open safari the web site size could be bigger. i have tried the font size, but that just adjusts the font. i tried the three lines in the corner , that makes the box bigger but keeps the web size the same...please any help would be great. is it not possible to adjust the box size and have the web size fill in that box??
thanks for any help

No, you have no control over the size or layout of the web site; that's a decision of the developers. Those choices were made for a good reason, so even if you could alter them, it would not be a good idea.
Mulder

How to increase page size in existing document and add margins uniformly.

I have a long document that I must print out to PDF, but I must now increase the page size. I do not want to change the text at all; just increase the sizes of the margins. When I increase the page size , my text frame remains the original distance from left-hand margin. In other words, the top and bottom margins increase evenly, but for the left and right margins, only the right margin grows. This leaves the text frame shoved over to the left-hand side of the page (or towards the binding in a two-page spread).
I would like for the page size to increase so that all margins increase in a uniform manner, that is, so that the text frame remains centered in the page, both horizontally and vertically. At present it is centered only vertically.
Thanks very much.

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

Page size issues while saving Deski report to PDF

Hi All,
While saving the Deski report as PDF, the page size changes randomly.
The workflow is:
Created a report in Deski.
-- Chekced in File | Page setup the zoom size(Fit to Print | Adjust to) is 100% and the paper size is A4.
-- Saved it as PDF.
-- In Acrobat Reader 7.0, opened the save report, the size of paper is 8.5*11, the normal paper size.
-- In the report in theFile | Page setup, changed the zoom size to anything less than 100% (e.g changed to 90%) whereas the paper size is A4.
-- Saved it as PDF.
-- In the Acrobar Reader noticed that the page size increases to some random size(e.g 9.18*12.99).
When priting the Document the printer changes the same to A4 resulting in truncating of the content.
The page size should be same but the content size should reduce.
The issue can be reproduced in 6.5 and XIR2 as well.
Is there any workaround for this that the size of the content decrease rather than increasing the page size??

Hi Sarbhjeet,
Thank you for all your help.
Further to our investigation we found that this is known issue and it is a limitation of the Product, it wont be fixed.
The ADAPT for the same is ADAPT00743734
It is reproducible with XI 3.1 as well.
FYI...........
1. PDF Engine will get the rendering information from the busobj. If there is a character size differences between PDF and busobj, there are chances that you may see bigger cells or reduced data in PDF.
2. In the report when Fit to 1 page by 1 wide in Pagesetup->FitToPrint, the page size will be set to the fit the complete report in busobj.
3. When save as PDF, this information (increased page size, due to settings in 2) will be sent to PDF Engine. The Engine will try to fit the size into the available standard PDF size (based on Print settings and other combinations).If it tries to fit the report (enhanced page size) to the available size, then we loose lot of information depending on the number of columns and rows.
4. Shrinking the report in busobj may not feasible.
When we change the page size in Fit to Print (either Adjust to % or Fit to ) , in reporter it changes the page size instead of changing the rendering to fit to the page.
When save the report to PDF, it gets the information with extended page size. So we see the enhanced page in PDF.
Also in order to implement the shrink (instead of changing the Page size), each cell has to be shrieked to the percentage of the reduced page (compared to the original page size). It becomes more complicated when charts come to picture.
I hope the above information helps.
Thanks & Regards,
Anisa

Page Size issues with Deski Reports while saving to PDF

Hi All,
While saving the Deski report as PDF, the page size changes randomly.
The workflow is:
Created a report in Deski.
-- Chekced in File | Page setup the zoom size(Fit to Print | Adjust to) is 100% and the paper size is A4.
-- Saved it as PDF.
-- In Acrobat Reader 7.0, opened the save report, the size of paper is 8.5*11, the normal paper size.
-- In the report in theFile | Page setup, changed the zoom size to anything less than 100% (e.g changed to 90%) whereas the paper size is A4.
-- Saved it as PDF.
-- In the Acrobar Reader noticed that the page size increases to some random size(e.g 9.18*12.99).
When priting the Document the printer changes the same to A4 resulting in truncating of the content.
The page size should be same but the content size should reduce.
The issue can be reproduced in 6.5 and XIR2 as well.
Is there any workaround for this that the size of the content decrease rather than increasing the page size??

Hello,
as you refer to Deski I recommend to post this query to the [BusinessObjects Desktop Intelligence|SAP BusinessObjects Desktop Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Desktop Intelligence documents such as universe connectivity, prompts, charting, formatting, filter, and formulas.It is monitored by qualified technicians and you will get a faster response there.
Also, all Desktop Intelligence queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages. Thanks again.

Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages.
Thanks again.
PS Are you working on a version for the iPad and iPhone with Add Blocker? That would be great!

Here are some zoom add-ons which might provide a workaround:
[https://addons.mozilla.org/en-US/firefox/search/?q=image+zoom&cat=all&x=0&y=0 Image Zoom]
As regards your question about iPad and iPhone, you'd be better off posting that question here: [https://forums.mozilla.org/addons/ Mozilla Add-ons Forum]
P.S. ''Apologies for not responding earlier''.

HT4972 How can I zoom the web page only vertically or horizontally ,i.e.,wThen I want to read the web page can I enlarge the page so that the font only increases size ?

How can I zoom the web page only vertically or horizontally ,i.e.,wThen I want to read the web page can I enlarge the page so that the font only increases size ?

You can't. (Fonts increase in size like everything else, not in height alone).

How to increase type size on 1 web page (Amazon)

Every web page I open is the same size type, etc. EXCEPT one (Amazon) which the type is so very small it's non-readable.
What can I do to fix the problem?
Thanks,
Jim Yeary

Go to toolbar select View, then Zoom, and then reset.
or just press Ctrl+0

Increasing size of tables , data in web pages

Hi I'm looking at data in web pages with lots of figures, however although I can change font size i.e. Safari preferences I can't seem to find one for digits etc..

Assuming that you're editing pages on the server, do you have the performance cache shut off on the server?
Roger

After the recent update the entire browser, including menus, icons, and everything on the web page, are too small. Fonts are smaller, pics are smaller, zoom settings will not remain universal. Minimum font size will make text readable, but all pics are to

The new update has screwed up my browser settings, I cannot get them fixed and Im pissed because my computer is an eye-sore to read until this is fixed! EVERYTHING in the browser is smaller, fonts, menus, icons, web page content, pictures, tables, etc. I have set the minimum font in the settings and the text is just to a point where it is easily readable at the maximum size setting, but all the menus and icons are still tiny and hard to read. The last version I had installed worked fine with no add-ons needed. Everything fit the screen fine and was easily readable without modification. I want this version off my PC and I want the last version I had back on but I dont know what version it was!!!!!!! ARARGGGG
In fact, this stupid troubleshooting window that I am in filling out this form doesnt fit the page right at all, and edges of the text are cut off, so Im not even sure what some of these boxes are asking for!!

See [[Toolbars and page content appear too large after upgrading to Firefox 3]]
*Try to adjust the DPI setting, see http://kb.mozillazine.org/layout.css.dpi
*Try to set the pref layout.css.devPixelsPerPx to 2 on the about:config page.
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.
If you need to increase (or decrease) the font size on websites then look at:
Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
NoSquint - https://addons.mozilla.org/firefox/addon/2592

Font Size in preview and printed web pages

Hi: I have had a long running problem that annoys me. ever since I purchased a 20inch LCD and changed my display to 1680x1050, web pages that I print appear very small. the same thing happens if I go through preview. Word documents do not have this problem; the font size there appears normal and is easily read.
Is there a solution to this?

There is a way to increase the default 72 DPI rez that saving a PDF uses, if your interested I'l try to find it.
Nevermind, found it...
To save PDFs in better resolution from Preview, try these Quartz Filters courtesy Jerome Colas...
http://discussions.apple.com/thread.jspa?messageID=6250289&#6250289

Increase web page size

Similar Messages

Maybe you are looking for