Incrementing Ascii and integer loop

Hi there,
Just wondering if anybody can help me with this little problem that I have... I'm trying to write a loop that increments ascii and integers. It should look something like this:
0 1 2 3 4 5 6 7 8 9 A B C D ..... X Y Z 00 01 02..... 0A 0B 0C .... 0Z 10 11 .... ABCD1 and so on...
I got the loop bits but I don't know what I can do to combine the 2...
 for (char x= 'A'; x <= 'Z'; x++)
 System.out.println("Count is:" + x);
 for(int i=1; i<11; i++){
 System.out.println("Count is: " + i);Can anybody give me some tips please? Thanks in advance!

you can do this you know
for(int i=0,char a='a';i<11,a<='z';i++,z++)and then print whatever you want to

Similar Messages

Need your suggestions - how to display large file in ASCII and HEX

Hello,
I want to create an application which can read in a large file and switch between displaying ASCII and HEX (formatted a particular way). There are two problems here that I'm not quite sure how to solve.
1. How to switch dynamically between ASCII and HEX. Should the HEX formatter be in the document of the JTextArea(or equivalent), or somewhere in the view? If it's in the view then where? I'd rather not read in the file more than once.
2. How to do some kind of paging scheme for huge files. I'd like to read in part of the file and display it, then when the user scrolls to another area, read in that part of the file.
Thanks!
Jeff

Hello,
I want to create an application which can read in a
large file and switch between displaying ASCII and
HEX (formatted a particular way). There are two
problems here that I'm not quite sure how to solve.
1. How to switch dynamically between ASCII and HEX.
Should the HEX formatter be in the document of the
e JTextArea(or equivalent), or somewhere in the view?
If it's in the view then where? I'd rather not read
d in the file more than once.You can iterate over all the characters in the String using String.charAt, cast the chars to ints, and call Integer.toHexValue(...)
>
2. How to do some kind of paging scheme for huge
files. I'd like to read in part of the file and
display it, then when the user scrolls to another
area, read in that part of the file.
Thanks!
Jeff

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

What is the diffrence between ASCII and BIN mode

Hello All,
What is the diffrence between ASCII and BIN mode
Regards,
Lisa.

'ASC' :
ASCII format. The table is transferred as text. The conversion exits are
carried out. The output format additionally depends on the parameters
CODEPAGE, TRUNC_TRAILING_BLANKS, and TRUNC_TRAILING_BLANKS_EOL.
'IBM' :
ASCII format with IBM codepage conversion (DOS). This format correspond
to the 'ASC' format when using target codepage 1103. This codepage is
often used for data exchange by disc.
'DAT' :
Column-by-column transfer. With this format, the data is transferred as
with ASC text. However, no conversion exists are carried out and the
columns are separated by tab characters. This format creates files that
can be uploaded again with gui_upload or ws_upload.
'DBF' :
The data is downloaded in dBase format. Because in this format the file
types of the individual columns are included, import problems, for
example, into Microsoft Excel can be avoided, especially when
interpreting numeric values.
'WK1' :
The data is downloaded in Lotus 1-2-3 format.
'BIN' :
Binary format. The data is transferred in binary format. There is no
formatting and no codepage conversion. The data is interpreted row by
row and not formatted in columns. Specify the length of the data in
parameter BIN_FILESIZE. The table should consist of a column of type X,
because especially in Unicode systems the conversion of structured data
into binary data leads to errors.

How to add cursor and for loop

PROCEDURE "TEST" is
bala number;
ins1 number;
ins2 number;
BEGIN
select sum(bal) into bala from (select sum(acp.acp_totbal) bal,acp_instruid from cs_strmap_t map,cs_instru_strips strip,cs_acpos_bkp acp
where c_int_instruid=c_srm_prncplinsid
and c_srm_prncplinsid=acp_instruid
and acp_acntnum!='SG030001'
group by acp_instruid
union
select sum(acp.acp_totbal) bal,acp_instruid from cs_strmap_t map,cs_instru_strips strip,cs_acpos_bkp acp
where c_int_instruid=c_srm_prncplinsid
and acp_acntnum!='SG030001'
and acp_instruid=c_srm_prntinsid
group by acp_instruid)view1;
dbms_output.put_line(bala);
select acp_instruid into ins1 from cs_strmap_t map,cs_instru_strips strip,cs_acpos_bkp acp
where c_int_instruid=c_srm_prncplinsid
and c_srm_prncplinsid=acp_instruid
and acp_acntnum='SG030001';
dbms_output.put_line('principal'||ins1);
select acp_instruid into ins2 from cs_strmap_t map,cs_instru_strips strip,cs_acpos_bkp acp
where c_int_instruid=c_srm_prncplinsid
and acp_acntnum='SG030001'
and acp_instruid=c_srm_prntinsid;
dbms_output.put_line('parent'||ins2);
update cs_acpos_bkp
set acp_totbal=-bala
where acp_instruid=ins2
and acp_acntnum='SG030001';
END;
i have written this code,i need to use cursor and for loops to get more than one rows and update also.
if there are more than 1 rows in cs_strmap_t,then the procedure throws an error stating that it cannot take 2 rows.
Edited by: 850836 on Apr 7, 2011 11:43 PM

PROCEDURE "TEST" is
bala number;
ins1 number;
ins2 number;
CURSOR cur_1 IS
select sum(bal) bala from (select sum(acp.acp_totbal) bal,acp_instruid from cs_strmap_t map,cs_instru_strips strip,cs_acpos_bkp acp
where c_int_instruid=c_srm_prncplinsid
and c_srm_prncplinsid=acp_instruid
and acp_acntnum='SG030001'
group by acp_instruid
union
select sum(acp.acp_totbal) bal,acp_instruid from cs_strmap_t map,cs_instru_strips strip,cs_acpos_bkp acp
where c_int_instruid=c_srm_prncplinsid
and acp_acntnum='SG030001'
and acp_instruid=c_srm_prntinsid
group by acp_instruid)view1;
BEGIN
select acp_instruid into ins1 from cs_strmap_t map,cs_instru_strips strip,cs_acpos_bkp acp
where c_int_instruid=c_srm_prncplinsid
and c_srm_prncplinsid=acp_instruid
and acp_acntnum='SG030001';
dbms_output.put_line('principal'||ins1);
select acp_instruid into ins2 from cs_strmap_t map,cs_instru_strips strip,cs_acpos_bkp acp
where c_int_instruid=c_srm_prncplinsid
and acp_acntnum='SG030001'
and acp_instruid=c_srm_prntinsid;
dbms_output.put_line('parent'||ins2);
for var_for in cur_1
loop
update cs_acpos_bkp
set acp_totbal=var_for.bala
where acp_instruid=ins2
and acp_acntnum='SG030001'
and abs(acp_totbal)>abs(bala);
dbms_output.put_line(bala);
end loop;
END;
i wrote the following procedure,but the balance is not getting updated.
Getting this errors when there are more than 1 row in cs_strmap_t table
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: line 22
ORA-06512: at line 2

MIDI Banks and Apple Loops Trustworthy Downloads?

I am currently attempting to locate and download MIDI banks and Apple Loops that I can use in the future, but I'm looking for a trustworthy site (a one stop shop if you will) to do this. If we only have Garageband installed, and not Pro Logic or any other programs, then is Garageband the only program to open up and play around with our MIDI banks or Apple Loops just for fun? I mean, is there another way we can open our loops simply to play around with and be able to pick out sounds we like, then perhaps save different sounds we like for future reference? I'm confused on how to actually open the loops and MIDI banks, so I need someone to tell me precisely how to do this if we just want to begin exploring. Thanks!

You can open Apple Loops in the Quicktime Player. Many sample producers offer their libraries in Apple Loops format as well as the more traditional standard WAV nowadays, so you should have no trouble finding plenty of resources.
Quicktime Player will also play GM MIDI files.

Itunes wont let me download anything for my ipod touch. everytime i try to it keeps looping thru to verify my account, so i do and then try to download and it loops me right back thru again to verify my account. HELP ME PLEASE :(

everytime i try to it keeps looping thru to verify my account, so i do and then try to download and it loops me right back thru again to verify my account. HELP ME PLEASE

Contact iTunes. Select the appropriate topic of:
Apple - Support - iTunes

Not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c

not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c
But i'm able to see other IKM's please help me, how can i see them

Nope, It has not been altered.
COMPONENT NAME: LKM Oracle to Oracle (datapump)
COMPONENT VERSION: 11.1.2.3
AUTHOR: Oracle
COMPATIBILITY: ODI 11.1.2 and above
Description:
- Loading Knowledge Module
- Loads data from an Oracle Server to an Oracle Server using external tables in the datapump format.
- This module is recommended when developing interfaces between two Oracle servers when DBLINK is not an option.
- An External table definition is created on the source and target servers.
- When using this module on a journalized source table, the Journaling table is first updated to flag the records consumed and then cleaned from these records at the end of the interface.

How to code a parallel 'for loop' and 'while loop' where the while loop cannot terminate until the for loop has finished?? (queues also present)

I've attached a sample VI that I just cannot figure out how to get working the way that I want. I've labeled the some sections with black-on-yellow text boxes for clarity during the description that follows in the next few sentences. Here's what I want:
1) overall -- i'm intend for this to be a subVI that will do data acquisition and write the data to a file. I want it to use a producer/consumer approach. The producer construct is the 'parallel for loop' that runs an exact number of times depending on user input (which will come from the mainVI that is not included). For now I've wired a 1-D array w/ 2 elements as a test case. During the producer loop, the data is acquired and put into a queue to be delt with in the consumer loop (for now, i just add a random number to the queue).
2) the consumer construct is the 'parallel while loop'. It will dequeue elements and write them to a file. I want this to keep running continuously and parallel until two conditions are met.
      i. the for loop has finished execution
      ii. the queue is empty.
   when the conditions are met, the while loop will exit, close the queue, and the subVI will finish. (and return stuff to mainVI that i can deal with on my own)
Here's the problems.
1) in the "parallel for loop" I have a flat sequence structure.. I haven't had time to incorporate some data dependency into these two sequential sections, but basically, I just care that the "inner while loop" condition is met before the data is collected and queued. I think I can do this on my own, but if you have suggestions, I'm interested.
2) I can easily get the outer for and while loops to run sequentially, but I want them to run in parallel. My reasoning for this is that that I anticipate the two tasks taking very different amounts of time. .. basically, I want the while loop to just keep polling the queue to get everything out of it (or I suppose I could somehow use notifiers - suggestions welcome)... the thing is, this loop will probably run faster than the for loop, so just checking to see that the queue is empty will not work... I need to meet the additional condition that nothing else will be placed in the queue - and this condition is met when the for loop is complete. basically, I just can't figure out how to do this.
3) for now, I've placed a simple stop button in the 'parallel while loop', but I must be missing something fundamental here, because the stop button is totally unresponsive. i.e. - when I press it, it stays depressed, and nothing happens.
suggestions are totally welcome!
thanks,
-Z
Attachments:
daq01v1.vi ‏59 KB

I'd actually like to add a little more, since I thought about it a bit and I'm still not quite certain I understand the sequence of events...
altenbach wrote:
zskillz wrote:
So i read a bit more about the 'dequeue element' function, and as I understand it, since there is no timeout wired to the dequeue element function, it will wait forever, thus the race condition I suggested above can never happen!
Yes, you got it!
As I've thought about it a bit more, there's a few things that surprise me... first, the reason the 'dequeue element while loop' errors is not because there's nothing in the queue, it's becaues the queue has been released and it's trying to access that released queue... However the problem I have is this --- Even though there's no timeout wired to the dequeue element, I still would think that the while loop that contains it would continue to run at whatever pace it wanted -- and as i said before.. most of the time, it would find that there is nothing to dequeue, but once in a while, something is there. however, it seems that this loop only runs when something has been enqueued. the reason I say this is illustrated in the next code sample MODv2 that's attached below. I've added a stop button to the "queue size while loop" so the program runs until that is pressed. I've also added a simple conditional in the "dequeue while loop" that generates a random number if it a button is pressed... but this button is totally non-responsive... which means to me that the "dequeue while loop" isn't actually continuously running, but only when an element is added to the queue. this still seems almost like the 'dequeue while loop" waits for a notifier from the queue telling it to run. can you explain this to me? because it is different from what I expect to be happening.
rasputin wrote:
I tried to open your VIs but it doesn't work. LV
is launched, the dialog box (new, open, configure...) opens and then...
nothing. Not even an error message. I guess it isn't a problem of LV
version or a dialog box would appear saying this. Could you, please,
send a image of the code?
Thanks,
Hi Rasputin, I'm using LV8. I assume that was your problem, but who knows. I've attached a pic of of altenbach's solution since it's what I needed.
thanks
-Z
Message Edited by zskillz on 10-20-2006 11:49 AM
Attachments:
daq01v1MODv2.vi ‏63 KB
daq01v1MODpic.JPG ‏116 KB

Chart Error - scroller positions should be positive and integer


Hello Expert
I have created a flash chart with two filters on the chart region.
i) ‘Select list with submit' ----- (:P23_TRC)
ii) ‘Radio button with submit' -----(:P23_IMPACTC)
The chart should display as per the filters selection.
However, I get the error message "scroller positions should be positive and integer", once, whenever I load this chart page for the 1st time in a new IE window.
After I change the filter's value it will work perfectly fine.
In filters default value is one value from respective filter list of value


If I remove the filter conditions from chart query, it works perfectly without error.
Here are my chart series queries
select null link, V.LOB label, COUNT(TR) "Customer Care"
from V_PROCESSTRACKING V
Where V.ProcessArea like '%Customer Care%' and (V.TR = :P23_TRC) AND ((V.IMPACT = :P23_IMPACTC)OR (:P23_IMPACTC = 'ALL'))
group by V.LOB
order by V.LOB
select null link, V.LOB label, COUNT(TR) "Sales"
from V_PROCESSTRACKING V
Where V.ProcessArea like '%Sales%' and (V.TR = :P23_TRC) AND ((V.IMPACT = :P23_IMPACTC)OR (:P23_IMPACTC = 'ALL'))
group by V.LOB
order by V.LOB
Customer XML
<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>
<root>
<type>
<chart type="Stacked Horizontal 3DColumn">
<animation enabled="yes" appearance="size" speed="10" />
<hints auto_size="yes">
<text><![CDATA[{NAME}, {VALUE}]]></text>

</hints>
<names show="no"/>
<values show="no" prefix="" postfix="" decimal_separator="." thousand_separator="," decimal_places="0" />
<arguments show="no" />
<column_chart column_space="3" block_space="12">
<border enabled="no" />
<block_names enabled="yes" placement="chart" position="left" >

</block_names>
</column_chart>
</chart>
<workspace>
<background enabled="yes" type="solid" color="0xffffff" alpha="0" />
<base_area enabled="no" />
<chart_area enabled="yes" x="215" y="50" width="705" height="500" deep="0">
<background enabled="no"/>
<border enabled="yes" size="1"/>
</chart_area>
<x_axis name="Line of Business" smart="yes" direction="horizontal" rotation="-90" position="left_center" >

</x_axis>
<y_axis name="No. of Process" smart="yes" position="center_bottom" >

</y_axis>
<grid>
<values />
</grid>
</workspace>
<legend enabled="yes" x="935" y="50">
<names enabled="yes">

</names>
<values enabled="no"/>
<scroller enabled="no"/>
<header enabled="no"/>
<background alpha="0"/>
</legend>
</type>
#DATA#
</root>
Help please!!!!! It's urgent
Sagar


Hi Rima,
I found the solution,
My graph is dependent on the page items. What I found was when I load the page, item default value was displayed but it was not stored in the memory. Item value only gets stored in memory when the page is submitted.
Line: -----
Soultion : - Create a page level before header process and define the default value over here as well. This will resolve your error.
Hopefully you understood what I am trying to explain. If not let me know and I will trying to put in picture and email you.
Sagar

I unplug my MacBook Pro from power and external speaker and I hear incremental beeps and sounds as if email being sent. Doesn't' stop until I close email

I unplug my MacBook Pro from power and external speaker and I hear incremental beeps and sounds as if email being sent. Doesn't' stop until I close email. Not sure what is happening our what if any emails are being sent.

You can install Temperature Monitor and have a look if the CPU oder GPU oder something else went to hot. The processor has a built in safety mechanism to shut down the computer before taking damage.

How to use Fuzzy Logic Controller for transfer function in labview control and simulation loop?

I am facing problem with fuzzy PD logic controller for transfer function in control and simulation loop.
Plz Help me in this regard...................
i have attache snapshot of my program
Attachments:
fuzzy in simulation loop.JPG ‏52 KB

Hi Sankhadip,
Sorry for the late response. I was looking at your code and
I noticed that the graph scale does not start from zero. That might be the
reason why you don't see the transient in the simulation. To change the scales
simply double click on the lower limit and set it to zero. If this is not the
expected results, can you please post the expected results, so we can see what are the
differences between the results . Also, you might be using different
solvers, and that gives different results as well.
Thanks and have a great day.
Esmail Hamdan | Applications Engineering | National
Instruments

Master and Slave Loops

I'm having problems with my Master and slave loop combination. I would like to be able to start and stop acquiring data from individual thermocouples. Please help.
Message Edited by nicholas03 on 04-13-2008 03:22 PM
Attachments:
eight thermo.JPG ‏106 KB

Dear Nicholas,
My first advise would be to check the examples on master-slave patterns, and run them step by step, looking at what the data does...
In a master-slave system, you use the queue to pass data from the master to the slave.   You're not passing data in the queue... in stead, you're passing data using local variables, which you should NOT do...
In the top loops, you should attach the temp array to the enqueue element.   In the bottom loop, you should remove the temp local, and instead get your data from the dequeue vi.
Also, you have to create a queue with the proper variable.   You can create a queue from any variable type, but it has to know beforehand, and the init vi.
Assuming you want to queue the temp array, you're basic structure should look like this:
It does help if you add your own code, so we can easier edit it for you... Otherwise we need to use photoshop on your design...
Message Edited by Anthony de Vries on 04-14-2008 11:30 AM
Attachments:
master-slave1.JPG ‏24 KB

What are: LiveType Media 1 & 2 - And Apple Loops?

Hello Hello
I just bought and installed the 'FCE HD Version 3.5' Upgrade - looks nice
Apple bundled with it, 'LiveType Media 1 & 2' - And 'Apple Loops'.
Before I install these programs, can you guys give me a brief description of what these programs do you for?
Why do I ask?
Well, I already have Sound Studio 2.2.4, and iLife 6. I just didn't want to install these new programs until I can find out if they're really worth it?
I guess the 'Apple Loops' will add some addtional sound effects to my Garage Band Sound Effects Library?
Thank you my friends
Mike

Hi Tom
Thanx so much for replying to my questions
Yes I see what happened - I 'UNCHECKED' those applications when I installed FCE HD, because I wanted to ask you guys about it's usefulness first. So I'd have to go back and re-insert the install disc to install them. But that's ok..
Tom - could you please tell me a little more about what 'Sond Track' offers?
I mean, can you do the same things that you can do in Garage Band?
EQ, Effects, Presets etc... ?
And are there any cool sound effects on that Apple LOOP Disc? Like the ones that Garage Band gives you?
Thanx Tom
Mike

Reading a fle format thats part ascii and part binary

Hey
I'm trying to write a importer for the PLY filke format. That file format starts of with a header in ascii and then continues with either the data in ascii or in binary. When the data is in ascii I have no problem reading the file but when the data is in binary I'm noth quite sure how I should do it. Right now I do something like this:
BufferedInputStream stream = new BufferedInputStream(new FileInputStream(file)); // I first create this
BufferedReader reader = new BufferedReader(new InputStreamReader(stream)); // then this is for reader ascii
DataInputStream dataInputStream = new DataInputStream(stream); // And this is for reading binaryThen I read the ascii header with the BuffereReader and then wheter I turns out that the data is in ascii I countine reading with the reader, otherwise I start reading with the DataInputStream. But the data from the DataInputStream is not the same as I get from the BufferedReader. I try it on these files that are in diffrent endians and either ascii ot binary
http://www.cs.ucl.ac.uk/staff/Joao.Oliveira/ply.html in the Nbunny.zip.
Anyone that can help me with this? Or know about a PLY file reader in java already?
Discordia
Message was edited by:
Discordia

DataInputStream is NOT the right class to use for general binary input. It is used only for the specific purpose of reading Java primitives. The input obviously needs to be in the right format for that to work, i.e. it needs to be written using a DataOutputStream.
I would read everything using an InputStream, not a reader. Store the bytes of the header until you reach the end of the header (not sure how to determine that since I don't know the fileformat). Then convert those bytes into a String using the proper charset ("US-ASCII" in this case, if by "ascii" you really mean ASCII).
Then just continue reading the binary data.

Incrementing Ascii and integer loop

Similar Messages

Maybe you are looking for