Indian programmer for remote programming
I am looking for a programmer based in India to develop data acquisition software for my company. I've done it in the past and it is easy enough to set up.
Hi Thomas,
I am really interested in this project. I have more than ten years
experience in developing software in LabVIEW and data acquisition.
Please let me know your requirements. I can be contacted at [email protected]
Regards,
Afzal
Message Edited by [email protected] on 02-17-2007 01:37 PM
Similar Messages
-
Evesham Alqemi 32" TV codes for remote
Trying to programme Vision+ remote to operate Exesham Alqemi 32TX HD ready TV; codes listed for Evesham on BT website don't work. Evesham went bust a number of years ago - so there's no tech support to be had there! I assume Evesham only badged the TVs or assembled from generic components
Anyone got any ideas what codes to try?ellis6 wrote:
None of the three codes (0891, 0912, 1783) work to program the Verizon remote control (Phillips RC1445301/00B) for our Vizio TV. I also tried the 9-2-2 method, pressing fast forward over 300 times to be sure I went through all of the 200 possible codes and that didn't work either. Has anyone here been able to program their Phillips remote with a Vizio TV?
I know you probably have. But have you looked here for possible updated info?
http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/SetUp.htm
Message Edited by prisaz on 02-08-2009 08:48 AM -
I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. because of a slow connection
If you are getting emails from these forums then you probably accidentally clicked on one of the links on the forums page where all the questions are listed e.g. at the top right of each forum's page there is text box with Actions and Notifications in :
So far you've posted in the iTunes Store forum :
https://discussions.apple.com/community/itunes/itunes_store#/
And the Using iPad forum :
https://discussions.apple.com/community/ipad/using_ipad#/
If on either of those forums that box says 'stop email notifications' instead of 'receive' then click on it and it should stop that forum sending emails to you.
There are full instructions on this page for stopping emails, as there are other places where they might have been set 'on' : https://discussions.apple.com/docs/DOC-3661
This is your original post for iTunes Match : https://discussions.apple.com/message/22647293#22647293
And this page lists your posts (you can click on each post on it to be taken to it's thread) : https://discussions.apple.com/people/suzettemg?view=overview -
I cant download itunes programme for my samsung rv510 laptop, it says error occurs after I try to instal the 10.7 version? What do I need to do?
.dmg.part is not a complete file.. It usually indicates that the entire file has not been downloaded yet. Are you sure you downloaded the entire file? (i recommend updating itunes through > Software Update
Alternatively, you can download it from here: http://support.apple.com/kb/DL1614 -
i have ordered an i-pad and cancelled it the other day. I have used my indian debit for that order. So money got debited immediately. Apple has sent an email saying that it is successfully cancelled. But money is not yet credited into my account. please let me know what is happening. I cancelled the order on April 9th. Its already been more than 15 days.
Your best corse of action would be to either email apple support or ring them giving them your debit I'd and the order number where they will be able to look at what's wrong and set u going on the right track
-
Updates for Remote Desktop via App Store Software Update
Hello, and Happy Thanksgiving. On a computer running Mavericks, I installed Apple Remote Desktop 3.5 from the disk (not from the App Store.) On it's first startup, I was greeted with the message "The Remote Desktop Administrator software must be upgraded on this computer." I downloaded and installed the 3.7 update manually from http://support.apple.com/kb/dl1565. However, I view this as a "Band-Aid", and not a fix. How would I recieve future updates for Remote Desktop from Software Update within the Mac App Store?
Hi ya.. just to let everyone know Apple UK Senior Tech support are aware of this error message that we are all getting as from today and are on the case....
-
I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
NarminI am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications. -
Key genaration for remote system
Hi,
I want to genarate number ranges for remote system like
a100 to z999.
But in Console its allowing me to enter only numaric values only.
could you please suggest me to achive this functionality.
Thanks in Advance.
Kiran.GHi Kiran,
I want to genarate number ranges for remote system like
a100 to z999.
But in Console its allowing me to enter only numaric values only.
could you please suggest me to achive this functionality.
If in Console, you are not able to put in Alpha numeric Numbers, then I can suggest you a workaround.
If you want to get the range a100 to z999,
then only take the numeric part in the range.
Try using an Assigment in the Data Manager. And Concatenate the Alplanumeric part to the numeric part.
I am not sure, whether it will work. But still try out.
Hope it helps.
Thanks and Regards
Nitin jain -
Hello, dear colleagues.
We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info).
Send Message, Disconnect, Logoff options works only for users in Administrators group.
I can't to configure permissions for Remote Desktop Users, specific user or AD group.
To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
RDP-Tcp, Security tab, add specific user account , AD group or configure
advanced permissions
for Remote Desktop Users.
But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
Thanks.
P.S. If move specific user from Remote Desktop Users group to Administrators group on
Windows Server 2012 R2 - it works.Hi,
You can prevent administrators from changing the permissions for a connection by applying the
Do not allow local administrators to customize permissions Group Policy setting.
This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
Apart there is one command with which you can set the permission for that check the related
article. Additionally checkthis
thread for more detail.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Issue: experienced when attempting to uninstall the App-V 5.0 SP2 RDS client.
Event Log: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder
path 'C:' contains an invalid character
Symptoms (when in this current state):
Unable to uninstall the SP2 client
You can upgrade the client (via hotfix) and uninstall the hotfix, but you will not be able to remove the SP2 client
AppvVfs filter driver will not create an instance, therefore applications will not be able to read into existing streamed VFS content, or trigger sparse files to stream content. (you can still stream the content via other means, like the UI or powershell)
Because of the AppvVfs filter driver not instantiating, applications that depend on licences that exist in VFS will not be able to be read causing certain applications to react as if the license does not exist or is an incorrect formatResolution:
Check for the existence of a hidden folder named %appdata% in the C:\Program Files\Microsoft Application Virtualization\Client folder. (You will need to un-check the folder options box in windows explorer for "Hide
protected operating system files" to see it)
If the hidden %appdata% folder exists, delete it.
Proceed to uninstall the App-V client
After a clean uninstall and removal of remnants of the client, reinstall the client again and apply the latest hotfix available (Hotfix 2 for SP2 at a minimum). -
Does Av digital adapter works with the universal dock for remote control?
if I only connect the Lightning to 30 pin adapter to the universal dock for remote control it works so good with music, spotify, Netflix, YouTube etc.
but if I add the av digital lightning adapter to watch on Tv, the dock and remote control don't work anymore what can I do? I want to watch stuff on tv and use the IR dock for remote control please help me what's going wrong?Thanks for your advice.
I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
Thanks -
I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK
Posted in error.
-
Desperate help needed to configure WVC210 for remote access?
Hi, I'm new and desperately need some help on setting up my WVC210 for remote access.
I manage to setup and see images from my WVC210 using my home LAN via both wired and also wireless.
I have 2 questions:
(a) for wireless connection, i only manage to get connection to my WVC210 if i disable the wireless security from my router. But that means i'm opening my wireless LAN to everyone. How can i still get connection to the camera if i enable the wireless security from my router. (FYI: my router is 2Wire ADSL from Singnet Mio)
(b) how can i get connection to my WVC210 from outside or in my office? I type in the camera Fixed IP address (displayed on the front screen) on the web browser, by it shows a error page. Is there some setting that i might need to adjust ?
Pls kindly help me
Thank you.Bernard,
For Item (2) is there any difference between the camera built-in dyndns updater versus the software updater? I am under the impression that the software updater is easier to manage.
The biggest difference for you is that the camera always stays at the same location, and the laptop goes with you. Every time you access the internet from a different location with the laptop the software updater is sending the new IP address to dyndns.com. This causes you to lose access to your camera because the FQDN doesn't point to your home IP address anymore. Once the dyndns credentials are in the camera (or router) there is no management needed. The device will automatically update dyndns.com with your new IP address as it changes, and you do not need to do anything.
For Item (3), are you saying port forward 1025 is it for the 2nd camera only or for both? Or is it 2nd camera use 1025 and first camera use 8080?
Here's an example of what I mean:
Camera 1: 192.168.1.210 port 1024. In router, forward port 1024 to 192.168.1.210
Local Access: http://192.168.1.210:1024
Remote Access: http://bernards210.dyndns.org:1024 (Example)
Camera 2: 192.168.1.211 port 1025. In router, forward port 1025 to 192.168.1.211
Local Access: http://192.168.1.211:1025
Remote Access: http://bernards210.dyndns.org:1025 (Example)
Camera 3: 192.168.1.212 port 1026. In router, forward port 1026 to 192.168.1.212
Local Access: http://192.168.1.212:1026
Remote Access: http://bernards210.dyndns.org:1026 (Example)
to access the 2 camera outside, do i have to have another dyndns host name or can i use the current one for both camera?
As you can see in the above example, the dyndns name remains the same for remote access to all three cameras. The only change is the port number at the end. Your router will translate the port number to the IP address that the port is forwarded to, allowing you to select the camera that you wish to view by changing the port number in the address.
I was actually thinking that the camera web browser can show 2 camera at the same time. Is it possible?
No. Each browser window will display a single camera. You can however opens multiple instances of your browser to allow viewing of more than one camera simultaneously. A better solution is to install the Video Monitoring Software that is included with the camera which allows you to view multiple cameras in the same window. -
LDAP vs local login for remote access
Hi Team,
I am evaluating the best means for single factor authentication for remote access (client to site or SSL VPN). The options I see are creating local usernames and password or integration with Active Directory via LDAP. What are the pros and cons of these solutions.
I feel local logins are more secure comparitavely because the user first login using local login and password and then has to use the domain credentials for accessing corporate resources. Of course, this comes at an admistrator overload and local management of user names and passwords. Do you have any opinion on this? Any acknowledgement will be highly appreciated.Hello Manoj,
IMO, I would never consider the LOCAL DB as an option for a corporate deployment. It does not scale and it is not easy to manage.
Local DB is used in case you need to manage a number of 15 users for instance, so in this case it is managable, but when it comes to a higher number it is not an option.
Active Directory is a better solution since it is meant to handle hundred of users and allows password-management for instance. Also you can have many ASA devices, performing DB bindings and queries to check the users credentials to the AD servers, so you don't need to deal with tons of user accounts on each ASA, for instance.
If you are looking for a more secure way to authenticate your users you can consider two-factor authentication using certificates for instance:
AnyConnect Certificate Based Authentication.
Why to use AD:
Pros
Scalable.
Easy to manage.
Allows password-management.
Cons:
Expensive (not open AD solution).
HTH.
Please rate helpful posts. -
I deleted Bonjour since I don't need it for remote printing. Now on start-up I get the message: "Airport Base Station Agent has stopped working" and also message: "can't find APAgent.exe.: Do I need AP Agent?? What to do?? Thanks.
The APAgent monitors your AirPort base station and informs you if there are things like firmware updates available. This utility relies on Bonjour, but is not required for base station operation. However, Bonjour makes it easier for your PC to "find" the base station via the AirPort Utility and I would recommend that you keep it installed. If you don't want the APAgent, you can just use the Apple Updater utility (that was also installed when the AirPort Utility was installed) to remove it.
Maybe you are looking for
-
I purchased 6episodes of junk gypsy downloaded but when I went to watch I can only watch about 45 seconds and that's it
-
I got the newest iPod and it has a messaging cube like on the iPhone and it will not let me send messages to my friends even with wifi. Please help me with my problem.
-
Newest update for itunes did not install properly, error 7 (windows error 126)
Is there anybody else out there that are having problems updating there itunes. I keep getting error 7 (windows error 126).
-
Exporting to MS Excel - default "save as" type
We have written code in our application that exports the results of the in MS Excel format and everything works fine except for one minor thing using IE. When the user is prompted, they can either "open" or "save". If they choose "save", it saves it
-
Error 4801, but not using Vista and have mic plugged into jack.
Hi, i'm working on a project that involves inputing from a microphone, running it through a filter and then an FFT, and then doing some analysis on the data. For the input from the microphone, i'm having some issues. I basically drew all of the input