Indic Langauge Search and Retrieval Problem

I went to www.guruji.com. Generated a Gujarati string "Guruji". I copied it to clipboard.
Next, I went to Microsoft Word 2007 and pasted that string into a document. Also, I pasted that string in Find in Microsoft Word. I could find the string. I also selected the string and copied it to clipboard. I got the same string.
Next, I generated two PDF fiies using Microsoft Word's own PDF generator and other with doPDF 7.1. I do not have access to Acrobat.
I could not search the Gujarati text in both files though it looked the same as in Microsoft Word.
When I copied the text from the PDF files to clipboard I got garbage.
I suspect that PDF generators may be a problem. But I am not sure.
As a side comment, Adobe Reader search text-box cuts bottom pixel row from Gujarati 'u's. FoxIt does not.

I am using portal 6.0 and have content that is
delivered by roles. The role membership is determined
by groups or attributes in a separately maintained
LDAP directory. And then through scripts the Role in
the Portal is updated to match the information in
that separate directory.
The problem that I am seeing is in the use of the
AMRole object. The following code where 'role' is a
valid AMRole object:
Set userDNs = role.getUserDNs();Throws the following exception:
Unable to get members::LDAP Error:The search
found more than the maximum number of
results.I have tried doing an ldapsearch from the command
line and I can retrieve all 1326 member's DNs that
way. I have checked the portal's directory server
setting for maximum results allowed to be returned
and it is way more than 1326., which is confirmed by
the command line search.
Any idea why the AMRole getUserDNs method is having a
problem while command line is not? This code works on
roles with fewer members.fewer members mean less than 100?? There is a sizelimit constraint configurable by IS admin in the adminconsole service, this is by default 100, tune this value . also if you look at the DS access logthat would show the error code and the number of entries resturned. the error code is 4

Similar Messages

Difference in WS performance between Search and Retrieve operations?

All,
We are currently working on a new repository and planning to use MDM webservices on top of that repository for searching and retrieving the data.
Now I'm curious about the difference in performance between the Search and the Retrieve operations and also within the Retrieve operation, between the different identification methods (internal ID, auto ID, remote key, unique field and display field).
Because in the webservices guide is stated that the identification methods are listed in order of best performance, but what are these performance differences between these methods (e.g. a retrieve on internal ID is x times faster than a retrieve on remote key which on his turn is x times faster than a retrieve on display fields which on his turn is x times faster than a search operation on same display field).
Of course the performance depends on lot of other things as well, but I just want to get a feeling on the performance related to eachother (keeping all other variables that can influence the performance the same!)!
I hope that any of you has experiences with all possibilities and can share performance measurements between the different operations related to eachother. Thanks in advance.
Regards,
Marcel Herber

Hi,
Did you implment Webservices in your site.
We are also having a similar scenarion where we have to serach a Records in MDM from SAP PI based on the certain criteria. I am concerned about the SAP MDM performance , since we are having heavy amount data being loaded every 30 minutes.
Please let me know the performace aspects of using Webservices.
Thanks
Ganesh Kotti

Help: YouTube app Search and sort problem

Hi,
I have problem with the YouTube app. I know there is a search feature, I found the magnifying glass. However, I have 3 problems.
1.) Search Problem: It won't search everything on YouTube. I tried seaching, many results would come up from PB's web brower, but it would NOT on the app. So, what's the point of the app?
2.) After finding the video, the app does not allow me to find/list "video by the same author" or "related video", the "related videos" are not so close "related" compare the web version.
3.) When press on the "info" buttom on the app. The author's describing and format are off. or not display completely..
Would someone please tell me if there will be a fix? or how to fix it?
Thanks

I am not having that problem. Could you post screen shots?
Be a Shepard and not an iSheep.

How can i search and retrieve the first word ...

How can i retrieve the FIRST or the SECOND word in a document stored in a file_datastore ?
Thanks
null

You noticed the first one yourself: the Found item list seems to randomly jump around the document -- I believe you are correct in your observation it may be due to the object construction order. That tells me, by the way, something about your lot numbers that tou didn't mention: your text is not one continuous long threaded story, but it's all or partially in disconnected etxt frames. The Found list does return everything inside a single story in the correct order, but it goes over each separate story in the order they were constructed.
The only solution is to gather all of your lot numbers, *re-sort* them according to the page number they appear on (and some sort of Worst Case Scenario is when you might have more than one lot number frame per page; in that case you also need to sort by textframe, top to bottom -- yet even worse is if you also may have these textframes side by side!).
Only then you have a reliable counting order.
This isn't too bad. We can just extend the method I offered for sorting top-to-bottom/left-to-right in Re: Working around the frame selection order issue in CS 4 and make it also include page numbers:
function byPageYX(a,b) {
    var
        aP = a.parentTextFrames[0].parentPage.index,
        bP = b.parentTextFrames[0].parentPage.index,
        aY = a.baseline[0],
        bY = b.baseline[0],
        aX = a.horizontalOffset[1],
        bX = b.horizontalOffset[1],
        dP = aP-bP,
        dy = aY-bY,
        dx = aX-bX;
    return dP?dP:(dy?dy:dx);
myResults.sort(byPageYX);
Or something like that.
As for actually implementing the above I cannot be of any help with Applescript.
Once we're dealing with sorting I think you're much better off in Javascript anyhow.

Using keys to search and retrieve values from HashMap

I've been fiddling around with this problem for a while and can't seem to find any working solution. What I have is a method that I want to return all values from a HashMap, but instead of using the regular keys for a HashMap (0, 1, 2, 3), my keys are different numbers such as 51414, 62513, etc.
public Car[] getAllCars() {
          Map<Integer, Car> myCars = system.getCars(); //getCars() returns HashMap of Car objects from another class
          Car[] c = new Car[myCars.size()];
          if(myCars.size()!=0) // ensure map is populated
               for(int i=0; i<myCars.size(); i++)
                    myCars.get(i);
          return c;
     }So what's happening at the moment is it loops through myCars and gets some values, but only those ones at the keys of 0-15 (the size of the Map). What I need is to get the Keys from myCars and use them to return all Car objects. The HashMap API has something called KeySet() which I think could help me, but I can't get that working.
Any ideas?

DiscoInferno wrote:
Short of an SSCCE I think this might more accurately describe what I'm after.
public Car[] getAllCars() {
          Map<Integer, Car> myCars = system.getCars(); //getCars() returns HashMap of Car objects from another class
          Car[] c = new Car[myCars.size()];
          Set<Integer> s = holds.keySet();
          Iterator keyIter = s.iterator();
          if(myCars.size()!=0)
               while (keyIter.hasNext()) {
                    Object key = keyIter.next();
                    Car cc = myCars.get(key);
                    System.out.println(myCars.get(key));
          return null;
     }What that does is gets the Car object that matches the specified key. What I need is for it to be returnable as an array of Car objects. I don't want it to print, but the output that is printed is basically what I want to be returned to an array.First, I'm not sure how you managed to find keySet() and not find values().
Second, okay, so you know how to get each value. Do you not know how to set a value in an array? Do you not know how to return a value from a method? Google can help you find tutorials for those. Otherwise, I have no idea what difficulty you're having.

Difference between a Search and a Retrieve web service?

Anyone has any idea what's the difference between a Search and Retrieve web-services generated by the 7.1 WS Generator? It seems like you can use both to retrieve any kind of result definition and search by any field.
I don't mind really, just curious if I'm missing something.
Alon

Googling led me to this:
Authentication:
Portal: You log-in to the site. Provides you with information based on who you are.
e.g. mail.yahoo.com
Website: No log-in.
e.g. www.yahoo.com
Personalization:
Portal: Limited, focused content. Eliminates the need to visit many different sites.
e.g. you type in your user name and password and see your yahoo mail only.
Website: Extensive, unfocused content written to accommodate anonymous users needs.
Customization :
Portal: You will select and organize the materials you want to access. Organized with the materials you want to access.
Website: Searchable, but not customizable. All content is there for every visitor.
e.g. you can navigate to yahoo mail, yahoo shopping, geo cities, yahoo group. If you wish to use any of these services you will either have to authenticate yourself and see things personalized to you or you can simply visit sections that are for everyone like yahoo news were if you are not signed in then the default sign in is guest.

How can i take notes, index and retrieve the notes on what i read? I read and can't remember the source.

How can I take notes on what I read, then index/catalog them for search and retrieval on my macbook air or on my iPad?

Try this one http://gigaom.com/apple/reset-os-x-password-without-an-os-x-cd/

TS2756 hotspot is not working on myiPad 3, hotspot tap is cellural data always appear that it is searching, and never stop. Vodafone and tradeline told me that there is no problem with carrier and Sw. Tethering data is never kept.

Hotspot appear always to search and never stop
internet is not working without internet APN data
Tethering APN never save the data
Vodafone carrier checked and mentioned that the no problem with the SIM
Tradeline checked and the IOS was latest 6.1, but asked to reinstall from scratch
Please advice

I have this _same_ issue, exactly. Initial backup goes just fine, but incremental backups fail. And like you, I replaced the internal drive.
The failures didn't start occuring long after the original drive was replaced--which was about 1 year ago. The new drive was non-Apple and worked fine--and tests fine now as well when outside the TC. But suddenly incremental backups started failing when the TC firmware and utility app were updated about 2-3 months ago. I even swapped the internal non-Apple drive for another known-working non-Apple drive, and same results.
I strongly suspect Apple added something to the firmware to check if it's an Apple or non-Apple drive in the TC and, if the latter, maybe causes incremental backups to fail. This is only speculation and, obviously, the initial backup still works, so any checksum like this would have to be only during the incremental backup process.
I'll be checking into this thred to see if others have the same issue, or if a solution is found. Hopefully my hypothesis is just para-apple-noia and it's some small, easy-to-fix issue.
-Gizm0d0

HTML character entities problem in saved regex search and replace query

I have a many search and replace regular expression queries (.dwr files) that I have saved. I have a problem specifically with saved queries that contain HTML entities such as "& nbsp ; " or "& shy ;" (spaces added otherwise code doesn't render in browser). For example if I use the following search:
([\d]{3}& shy ;[\d]{3}& shy ;[\d]{4}|[\d]{3}& nbsp ;[\d]{3}& nbsp ;[\d]{4})
(which searches for numbers in the 888-555-1234 or 888 555 1234 formats)
This will work fine if I manually enter it into the search text area. However if I save it to file and reload it, it will no longer work because the  and characters are now displayed as " " (space) and "-"(shy) rendering the saved query useless as it's no longer searching for the code. I have some fairly long and complex queries and this is becoming a problem.
Thanks for any help.
I'm currently using Dreaweaver CS4 at home and CS5.5 at work.

Thanks for your reply Kenneth, but that is not what I'm trying to accomplish. I'm looking for the HTML entities that exist in the source code which are & shy ; and & nbsp ; (without the spaces). As I mentioned above, if I enter them manually in the search box, I will get the corrrect results. If I save the search and then reload it, the special characters are no longer in HTML and the search is now useless.
Just for example again
In an open document in code view insert a number in the format (without the spaces): 888& nbsp;888& nbsp ;8888
Open a search dialog box and enter (without the spaces): [\d]{3}& nbsp ;[\d]{3}& nbsp ;[\d]{4}
The search will find that entry.
Save search as phone.dwr for example. Then load it and try the search again. It won't work because upon loading the search Dreamweaver replaces the HTML code which was saved with the rendered HTML. So now the search shows up as: [\d]{3} [\d]{3} [\d]{4} which will not find the string with hard coded non-breaking spaces that I'm looking for.
Basically I want to be able to save a search query for reuse. When I load a search query, I want it to be exactly what I saved, not something that DW has rendered (that doesn't work).

Friends, i have a problem with safari . Whenever i am typing in the safari main bar , so in the halfway through the typing my sentence/words are shifting to another main google search and in the end i have to type again in google

Friends,
i have a problem with safari . Whenever i am typing in the safari main bar , so in the halfway through the typing my sentence/words are shifting to another main google search and in the end i have to type again in google. I have attached a sample screenshot of the safari problem which i am facing. In this particular example i wanted to write Print Screen, however halfway,my typing automatically shifted to google bar?? can you guys help me.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

Search and replace string problems

Hi to all,
I have problem with Search and replace string function. It shows me a wrong Value (Number) from 15 to 100 is everything OK (15=0, 30=1, 45=2, 100=3), but after 100 ........
Take look in VI and if you have any ideas post them please
THX
Igor
Attachments:
indexing.vi ‏10 KB

there will be no 15115 string, but 15 or 115 and 15 is 0, 115 is 4. Anyway, i have changed string input format and now its working THX for your help
Attachments:
indexing.vi ‏10 KB

I downloaded several tv shows on my computer and attempted to drag and drop to my iPod touch. I received an error message indicating that there was a problem syncing to my iPod. What steps should I take next? This has never happened before.

I downloaded several tv shows on my computer and attempted to drag and drop to my iPod touch. I received an error message indicating that there was a problem syncing to my iPod. What steps should I take next? This has never happened before.

Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select the Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down.
http://www.thesafemac.com/fbi-ransomware-virus-rampant/

Problem with removing Search and Advanced Search functionalities in Portal

Hi,
      As per our client requirement, we have removed search and advanced search functionalities in Masthead and those are working fine. But when ever we restarted the portal server, these search options are reappearing in portal.
          I am not getting why it is happening and every time we restarted the server, we are removing these search functionalities from masthead.
          If anyone knows why it is happening, kindly share with us
Thanks & Regards
Pavan

Hi Santosh,
                     Problem is not solved. Where can i find the Standard tool area iview used in Default frame work page ?
At present, we disabeled the search and it's working fine. But when we restart the portal, search is again reappearing and we need to disable that once again.
           Is there any sollution for this problem?? Kindly let me know..
Thanks & Regards
Pavan
Edited by: pavanakrishna reddy on Mar 24, 2010 9:44 AM

I iPad 3 fails to recognize cellular data In a number of locations Displays "searching and No Service" I have narrowed this to device problem. What can I do?

i iPad 3 fails to recognize cellular data In a number of locations Displays "searching and No Service" I have narrowed this to device problem. What can I do?

Hello there, OSOSANYA.
The following Knowledge Base article provides a great checklist of steps and additional recommendations for troubleshooting issues with cellular connection:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Follow these steps for help troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Make sure that your software is up to date:
Check for a Carrier Settings Update: Tap Settings > General > About.
Check for an iOS Software Update: Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still doesn't, contact your carrier to report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have a problem with my iphone 3sg and my signal keeps searching and then say no service. i cannot do anything with my phone not even connect to itunes

i have a problem with my iphone everytime i tried to restore my phone signal keeps searching and eventually says NO SERVICE. this does not allow me to connect to itune or anythintg i connect to the wifi but afer 3minutes it says to try again i went to a iphone shop today and i sorted my phone when i tried to update it asked me to res tore first and now my phone is back to the first problem. please help me advise me whatto do
thank you
akshay inderman

Was your phone jailbroken or "unlocked" by someone other than the carrier it was originally locked to?
Sounds like you have a hacke/jailbroken phone.

Indic Langauge Search and Retrieval Problem

Similar Messages

Maybe you are looking for