Indicator only recives data at the termination of VI

I have had this problem happen several times. What happens is that I right click a node's terminal and select create>>indicator. But the indicatior only updates when at the end of the VI when I stop it. Anything before that it just shows the previous value, like 0, instead of updating in the middle of the program when it recieves the data. This has happened with a SubVI that I made (unsigned 16-bit indicator) and with the "read" VI (not the "easy read" VI). With the read VI, I made an indicator for the "buffer", which was a string value. It should be noted though that the indicator was a funny, unusual type that the NXT Toolkit ususally has when you select create>>indicator. With the SubVI, I ran it indipendantly and it worked fine, so it was "outputing" data through the terminal. I also put a breakpoint on the wire from the SubVI to the indicator, and it never activated, the VI only ended when it was supposed to.
Does anybody know what's up, know what I should do, or have this happen to them before?

Thanks Mike; that makes sense now. And it sounds like a good idea but I don't think that's the case with this problem. I've included attachments of a Word document that further discribes my problem and the two VIs that are related to the problem. Hope that helps. Sorry that it's taken a while to get back to this thread
Attachments:
Calibrate Axis Centers (SubVI).vi ‏51 KB
NXT LabVIEW Problem.doc ‏137 KB
Main Joystick Car VI.vi ‏38 KB

Similar Messages

  • Why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.

    why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.
    The created program is not performing a command I have written when it tries to connect to the internet, it must be Labview that is doing it. How do I stop this from happening? 
    Any help would be very appreciated.

    It looks that way..
    "When LabVIEW starts it contacts the service
    locator to removes all services for itself. This request is triggering
    the firewall.This is done in case there were services that were not
    unregistered the last time LabVIEW executed- for example from VIs that
    didn't clean up after themselves"
    This is not yet fixed in LV2009.
    Message Edited by Ray.R on 11-04-2009 12:25 PM

  • Not All Variables Bound - Only on Dates in the Visual Studio/Table Adapter

    I am trying to execute a SQL statement created in a table adapter. I am using VS 2010 and ODP 11.2.0.1.2.
    Anytime I add a DATE column in the where clause with a parameter (in bold below) I get one of two errors.
    1. Pass date as 01/01/2010: "Bad Month" -ok I know what this is...
    2. Pass date as 01-JAN-10: ORA-01008: not all variables bound
    where pro.user_id = :user_id
    and (pro.select_typ_cd = 'adr'
    and acct.mkt_uw_empl_id = pro.select_key
    or pro.select_typ_cd = 'abc'
    and acct.mstr_agy_lgl_entity = pro.select_key)
    and (:BUSINESS_TYP_CD = 'all' or acct.BUSINESS_TYP_CD = :BUSINESS_TYP_CD)     
    and (USER_ACCT_STS_CD != 'lost' or SYS_ACCT_STS_CD != 'lost')
    and LOB_EFF_DATE = :EFF_FROM

    Got this to work in one case
    First use to_date LOB_EFF_DATE > to_date(:EFF_DATE_TO,'MM/DD/YYYY').
    Second on the table adapter parameter you have to define the DBType as string not Date, and the provider type as VARCHAR2 not Date. Make sure you change the length to 10 it defaults to 7.
    Oracle needs to fix this why in the world do I have to pass a date in a parameter on a table adapter as a string and go through this mess.

  • Downloading problem::getting only partial data from the net, why ??

    hi
    i am trying to download a file using the code
    InputStream getStream(){
    try {
    URL url = new URL("http://www.etc..");
    URLConncection urlconn= url.openConnection();
    InputStream in =urlconn.getInputStream();
    return in;
    }catch(MalformedURLException ){...}
    catch(IOException ioe){...}
    the problem is it is not getting the complete data.
    i tried to download a file which is 46k but it got only 1.3k
    can any one tell what to add or modify the above code so that i will be getting the complete data
    thanks in advance
    have a nice time
    krishna
    email id:[email protected]

    Try to set the request property and usecaches like
    this:
    con.setUseCaches(false);
    con.setRequestProperty ("Content-Type",
    "application/octet-stream")
    not working, i tried to download 46663 bytes got only 1369 bytes,please suggest me another solution.
    thanks in advance
    krishna

  • Would it be useful to set a partition on my internal HD only for data and the other for apps, OS and that kind of stuff?

    As I wrote in the title, would it be useful?
    I come from a Windows PC where I had that kind of division and it seemed everything had worked fine along 5 years.
    Please, give a motivation to your answers to let me get in the point.

    File fragmentation is not an issue with OS X, which looks after itself.
    Defragmentation in OS X:
    http://support.apple.com/kb/HT1375  which states:
    You probably won't need to optimize at all if you use Mac OS X. Here's why:
    Hard disk capacity is generally much greater now than a few years ago. With more free space available, the file system doesn't need to fill up every "nook and cranny." Mac OS Extended formatting (HFS Plus) avoids reusing space from deleted files as much as possible, to avoid prematurely filling small areas of recently-freed space.
    Mac OS X 10.2 and later includes delayed allocation for Mac OS X Extended-formatted volumes. This allows a number of small allocations to be combined into a single large allocation in one area of the disk.
    Fragmentation was often caused by continually appending data to existing files, especially with resource forks. With faster hard drives and better caching, as well as the new application packaging format, many applications simply rewrite the entire file each time. Mac OS X 10.3 onwards can also automatically defragment such slow-growing files. This process is sometimes known as "Hot-File-Adaptive-Clustering."
    Aggressive read-ahead and write-behind caching means that minor fragmentation has less effect on perceived system performance.

  • Service Level Tracking Reports show no data from the data warehouse db.

    Hi, I have some Service Level Tracking reports that will only show data from the last few days.  If I select last month as the time frame, there is no data displayed.  All of these reports have previously worked fine.  Nothing to my knowledge
    has changed, and it appears that the data is still being collected in the data warehouse database.  Any thoughts would be greatly appreciated.

    Is this meant for SCOM forum
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • My Ipad indicates that it should save my data over the last 2 weeks. A message tells me to connect the Ipad to wifi to enable this saving, however although I did as requested, it does not work and I cannot get rid of that message and I am blocked. Many th

    My Ipad is blocked with a message indicating that my data of the last 2 weeks were not saved, and to allow such saving I need to connect the ipad to a wifi. I did so but it does not work. What should I do? Many thanks for your help

    I unblocked my ipad thanks to the solution offered by spritof.
    Many thanks

  • Sorting by last 12 months in a Chart with data from the last 24 months

    Hi Guru's
    I am trying to create a Trend chart which will show the trend percentage vs previous year.
    In the X -axis I have Month wich is currently sorted by Jan, Feb, Mar etc ...Dec.
    The problem is that I want to show the last 12 months instead, but since I need data for the last 24 months to do so, I am having problems with the chart to show correct sorting.
    If this month is Oct 2011, I would want the chart to show the follwoing in the x axis:
    Oct10, Nov10, Dec10, Jan11,Feb11, Mar11, Arp11, May11, Jun11, Jul11, Aug11, Sep11.
    The problem is that in order for me to create the diff between previous year/month, the chart will either show last 24 months or 12 months thus causing the previous years values to disapear.
    So far I have managed to create a variable that will tell the age of the values in a month. The Chart is filtered and will now only contain data for the last 24 months. I have a variable which calculates the diff for each month agains previuos years values.
    So far so god, but how can I solve so that values are are included in the chart and sorted by the last 12 months?

    I discovered the solution, appereantly it was as easy as using the IN operator:
    =[Year] Where ([vAgeMonths] <= 12) In ([Time].[Short month])
    Now I am able to sort this by year and then month. Sometimes it helps tinkering a bit and a sollution will reveal it self.

  • HELP How to rescue data from a HD with only the Terminal utility working

    I can no longer access the hard disk on a 2008 unibody Mac Book after an failed OS upgrade (?). Running the original OS 10.5.5 from the grey CD-ROM that came with the device and using the "Terminal" utility, I find all data in their place and within the correct structure.
    I tried to make an image of the HD or to copy the files to the external disc using the Hard Disk utility, but all attempts have produced an "operation not possible" message. Target mode will not work, as the device has no firewire connection implemented.
    How can I access the files (I know they are there, I can see them...) and e. g. copy them to an external disc or rescue them with an other method?
    PLEASE HELP ME
    Thank you, Martin
    PS Please don't tell me that experienced users will always have backups of their files: It is my wife's device and that's exactly what I have been telling her for years. Still, it's my wife... 

    Click here and choose 10.5 from the menu for usage instructions. Installing the OS on an external drive is done the same way as doing it on the internal drive, but it needs to be formatted as Mac OS Extended (Journaled).
    (61589)

  • Updated CC today .. now the app manager is indicating only ten apps are now installed.

    I updated all apps today as per normal via the CC App Manager. All apps successfully updated, until Photoshop, which failed to update. I tried more than several times to update but it kept failing.
    I then decided to close the CC Manager and restart. When I accessed the Manager again and went to View Updates & Requests, the list indicated only ten apps were installed, and the rest had to be installed (AGAIN).  I  checked my Applications Folder and all the CC apps were still installed and working.
    I haven't received any error messages. However when I returned to the website the apps were indicating for me to download trial versions. My CC account is current and paid up til March 2016. Now I have just  accessed my Adobe ID account and checked under Plans & Products section, but it is indicating I have no No Registered Products.
    So currently my Adobe Creative Cloud Manager is indicating I have ten apps up to date (Lightroom 5, Acrobat XI Pro, Edge Animate CC, Edge Code CC, Edge Inspect CC, Edge Reflow CC, Extendscript Toolkit CC, Flash Builder Premium, Gaming SDK 1.4, Scout CC) but all other key applications have the install icon by their side (Photoshop CC, Illustrator CC, InDesign CC ...etc).
    I started on Photoshop 4 many years ago and have never had any issue with any of the Creative Suite's. I also had issue with my Adobe ID not being accepted, even when copy/pasting from my Keychain Access. I had to reset my password (used the same password anyway).
    My confidence in Creative Cloud is now somewhat diminished and I am considering canceling my CC subscription and returning to CS5 - because it works!
    EDIT: Since starting to write this the Adobe ID/ Community site has logged my account out unexpectedly. Not good.
    Adobe Creative Cloud v 1.9.1.474
    Yosemite 10.10
    MacBook Pro (Retina, 15-inch, Mid-2014)
    2.2 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    APPLE SSD SM0256F: 256GB
    Intel Iris Pro 1536MB
    Adobe ID: Craig Mathews
    [email protected]

    I decided to uninstall Adobe Desktop Manager and reinstall, and seems to have remedied all of the CC apps issue...
    However still getting randomly logged out of my account and my password is not being accepted...
    Only way I got access again was to open three instances of the log in page and try again - third window opened, other two declared my password was wrong >_<
    This new online / cloud system is terrible. Might just reinstall CS5 anyway and be done with this crap. Meh!

  • I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

    i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it.  I am gettting the data from rs232 interms of 0 or 1.  and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

    I have attatched the vi.  Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off.  suppose if 0 comes the corresponding data status is wrtten into the text file.  But here the problem is the same data will be printed many number of times.  so i have to make it like if there is a transition from 1 to o then only print it once.  how to do it.  I am doing this from few weeks please reply if you know the answer immediatly
    thanking you 
    Attachments:
    MOTORTESTJIG.vi ‏729 KB

  • I am migrating to a new iMac via TimeMachine back up.  My iPhoto libraries are on external drive.  I'd like to migrate only the internal hard drive data to the new internal Drive then just plug in iPhoto library drive.  Is this going be a problem?

    I am migrating to a new iMac via TimeMachine back up.  My iPhoto libraries are on an external drive.  Both drives are backed up on Time Machine.  I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug in iPhoto library drive to the new iMac.  This would save having to transfer several hundred GBs of data.  Will this work using Set Up Assistant?

    Your user account on the new Mac must have a different UID than on the old one.  See the pink box in Problems after using Migration Assistant for an explanation.
    You'll need to change the permissions on the iPhoto library on the external HD.  Do a Get Info on it, click the padlock at the bottom of the Sharing & Permissions section of the Info window and enter your Admin password. 
    Then click the plus sign, select the user account you want on the next screen, and click Select.   Then change Read only to Read & Write for that user via the little arrows.  Finally, click the "gear" icon and select Apply to enclosed items.  That may take a few mintutes on a large library.

  • How can I import my IE8 bookmarks/favorites into Safari if I only have access to the data stored on my old hard drive? I can't run Windows to export them to an html file.

    My old PC died and I replaced it with a MacBook Pro.  Although I was able to copy the data from the PC's hard drive, I am unable to export my previous bookmarks/favorites to an html file because that PC won't boot.  Is there any other way to import them into Safari using the raw data stored on that drive or convert them somehow to a format I can import?

    You can only use a JSON backup to restore all bookmarks in Firefox.<br />
    If you need to import Firefox bookmarks in Safari then you need to (re)install Firefox and export the bookmarks to an HTML file.
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • Calendar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date.

    Calenndar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date month.  How do I do this with the new operating system?

    Adding to Alan's answer:
    One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled. 
    If you weren't using either of E-series board's counters, there is a nifty solution to this!  You'll be using 1 of the counters to generate the variable-rate sampling clock.  You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter.  This gives you a hw-timed measurement of every sampling interval.  You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
    Note:  the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st.  For your app, you should ignore it.
    -Kevin P.

  • TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

    I found this  (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder. 

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Maybe you are looking for