Info Package Routine issue.

Hi I was working on an info package routine. I have to load somw documents based some some criterias. My question is how may values can i append for loading Document No. i have somwhere about 400,000 records. I'll have all those doc no's in an Internal table... Can i append all those and load or is there any limit for doing so.
Thanks in Advance.

Hi Siva,
I would suggest to use range instead of appending the document numbers one by one. Its not best of approach.
You can maintain a transparent table with different range values if you don't have sequential values. Write a routine in the info-package to restrict the document number to the ranges.
Hope it helps.
Thx.
Soumya

Similar Messages

Info package Routine - How to write

Hi ,
Can any body give me the step step by process on how to write Info package routine. Actually my requirement is to load the current month Data automatically through infopackge . I can write the ABAP code , but i am told to write in Infopackage level.
Thanks in advance..

Hi,
In our case we had a requirement to load the data for the transactions occuring in the last 15 days only, so we have write the routine on the last modified date feild in the infopackage.so as to select only records modified or created in the last 15 days..
attached is the sample code....
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'LAST_MODIFIED_DA'.
l_idx = sy-tabix.
data : w_cdate type d .
l_idx = sy-tabix.
w_cdate = sy-datum.
w_cdate = w_cdate - 15 .
L_t_RANGE-LOW = w_cdate .
L_t_RANGE-HIGH = sy-datum .
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-OPTION = 'BT'.
append l_t_range.
modify l_t_range index l_idx.
p_subrc = 0.
Hope it helps...
Regards,
Umesh.

Info package routine

If I want to delete a line of data in say an update rule start routine, I can write for example the following:
DELETE DATA_PACKAGE WHERE <field> NE 'ABC'.
I am wondering if I can write the same in an info package and if so rather than DATA_PACKAGE what should I be referencing? Thanks

Hi Nitin,
Please note that is is not possiable to delete any data in InfoPackage routine, but surely you could ignore the value of a field when it is not equal to ABC or just load data for a field for value ABC. If that field is not present in the selection screen, you could get it into the selection screen by selecting it in RSA6, datasource maintenance.
No need to write a routine, it is just a simple selection is what you need to give.
Hope this helps.
Regards,
Pankaj

Info Package ABAP Routine

Hi
For FIGL_4 there is both open items and closed items. i want to filter only Open Items Accounting doc no's records for Customers,Vendors,GL account at info package level.
There are 3 ODS's in BW side for Open items Customers,Vendors,GL accounts. i want to filter open items based on these 3 ODS's Active data table.But i am getting error when i execute the request in Info Package.
*Error Message "For sel. field 'BELNR ', no selection with SIGN = ' '; OPTION ' ' allowed     RSM1     607     *
Below is the Info package Routine code
program conversion_routine.
Type pools used by conversion program
type-pools: rsarc, rsarr, rssm.
tables: rssdlrange.
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
TABLES: /BIC/AZOCFFIGL00,/BIC/AZOCFBSID00,/BIC/AZOCFBSIS00
        ,/BIC/AZOCFBSIK00.
DATA:   ...
TYPES : BEGIN OF TY_ZOCFBSID,
        /BIC/ZMCFADCNO LIKE /BIC/AZOCFBSID00-/BIC/ZMCFADCNO,
        END OF TY_ZOCFBSID.
TYPES : BEGIN OF TY_ZOCFBSIS,
        /BIC/ZMCFADCNO LIKE /BIC/AZOCFBSIS00-/BIC/ZMCFADCNO,
        END OF TY_ZOCFBSIS.
TYPES : BEGIN OF TY_ZOCFBSIK,
        /BIC/ZMCFADCNO LIKE /BIC/AZOCFBSIK00-/BIC/ZMCFADCNO,
        END OF TY_ZOCFBSIK.
DATA : TB_ZOCFBSIS TYPE TABLE OF TY_ZOCFBSIS WITH HEADER LINE,
       WA_ZOCFBSIS TYPE TY_ZOCFBSIS.
DATA : TB_ZOCFBSID TYPE TABLE OF TY_ZOCFBSID WITH HEADER LINE,
       WA_ZOCFBSID TYPE TY_ZOCFBSID.
DATA : TB_ZOCFBSIK TYPE TABLE OF TY_ZOCFBSIK WITH HEADER LINE,
       WA_ZOCFBSIK TYPE TY_ZOCFBSIK,
       FLAG TYPE I.
$$ end of global - insert your declaration only before this line   -
    InfoObject      = ZMCFADCNO
    Fieldname       = BELNR
    data type       = CHAR
    length          = 000010
    convexit        = ALPHA
form compute_BELNR
tables   l_t_range      structure rssdlrange
using    p_infopackage type rslogdpid
           p_fieldname    type rsfnm
changing p_subrc        like sy-subrc.
      Insert source code to current selection field
$$ begin of routine - insert your code only below this line        -
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'BELNR'.
          l_idx = sy-tabix.
       SELECT
       /BIC/ZMCFADCNO
       FROM /BIC/AZOCFBSID00
       INTO TABLE TB_ZOCFBSID.
        SELECT
        /BIC/ZMCFADCNO
        FROM /BIC/AZOCFBSIK00
        INTO TABLE TB_ZOCFBSIK.
        SELECT
        /BIC/ZMCFADCNO
        FROM /BIC/AZOCFBSIS00
        INTO TABLE TB_ZOCFBSIS.
       LOOP AT TB_ZOCFBSID INTO WA_ZOCFBSID.
       l_t_range-sign = 'I'.
       l_t_range-option = 'EQ'.
       l_t_range-low = WA_ZOCFBSID-/BIC/ZMCFADCNO.
       Append l_t_range.
       CLEAR l_t_range.
       ENDLOOP.
       LOOP AT TB_ZOCFBSIK INTO WA_ZOCFBSIK.
       l_t_range-sign = 'I'.
       l_t_range-option = 'EQ'.
       l_t_range-low = WA_ZOCFBSIK-/BIC/ZMCFADCNO.
       Append l_t_range.
       CLEAR l_t_range.
       ENDLOOP.
       LOOP AT TB_ZOCFBSIS INTO WA_ZOCFBSIK.
       l_t_range-sign = 'I'.
       l_t_range-option = 'EQ'.
       l_t_range-low = WA_ZOCFBSIS-/BIC/ZMCFADCNO.
       Append l_t_range.
       CLEAR l_t_range.
       ENDLOOP.
          modify l_t_range index l_idx.
          p_subrc = 0.
$$ end of routine - insert your code only before this line         -
Edited by: AtulMohan Mishra on Dec 27, 2010 1:11 PM

Hi
Now i am facing an error during data extraction from Source system
error message in BW system "Error occurred in the data selection " Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
when i checked in SM37 (R3 system) i found the job has been cancelled and Log of this job says
"Asynchronous sending of InfoIDOCs 2 in task 0001 (0 parallel tasks) DATASOURCE = 0FI_GL_4
ABAP/4 processor: SAPSQL_WHERE_CANT_SCAN
Job cancelled      "
it seems to me the Problem in Routine at Info Package level.
My Requirement is to fetch only those Accounting Doc. No. RECORDS from 0FI_GL_4 data source which are present in Active data table of BSID,BSIK,BSIS ODS's.
So i want to put logic at Info Package routine .
1) fetch all Accounting Doc. No. from Active data table of BSID,BSIK,BSIS Ods's and Match those Accounting Doc. No.'s with the 0FI_GL_4 data source Accounting Doc. No's.if a Accounting Doc. No. match with 0FI_GL_4 data source Accounting Doc no then that corresponding record from 0FI_GL_4 will go to the ODS
Regards
Atul

ABAP Routine in selection of Info package in 3x

Hello Experts
We need to load distinct PO data in 3x server.
I have added this distinct po values in range table of info package abap routine.
However its not loading for range table values more than two selections/pos.
If I try to append more than 2 values,only last one is uploaded.
However after load, in monitor tab-header , selection paramenters I can see all PO values in selection.
Some how it works only for two inputs (rows) in range table of ABAP routine in infopackage.
Anybody has faced such issue? any help is appreciated!
Edited by: Kanchan Angalwar on Jan 30, 2010 9:59 AM

Hi,
Please post your ABAP code here

Issue withe Info Package Selection for the CRM Datasource

Hello,
I have a custom CRM data-source which has the Selection option as CRM-GUID as the Selection option in the RSA3.
I have replicated the Same Data-source in BI system and Created the Info Package ,but i could not see that GUID Selection in the Info Package.
To Be Noted:
I went to RSA6 enabled the selection option( check Box ) , there is no hide option in the datasource , only the Selection option check box is enabled in the RSA6 .
Replicated again , and activated again , logged out and logged in again . But the Info Package does not show the CRM - GUID selection option.
I found something not sure this might be the issue:
1) The Data type is RAW with length 16.
2) The Datasource in the BI side has SS conversion Routine Blank for this field and the Selection has X.
But no Selection option in the Info Package.
Any suggestion and inputs are welcome.
Thanks in advance.
Adhvi.

similar issue is disussed in the below thread...
Info package Selection were hidden
Info Package Selection Language key is not diplaying while this is checked
search for any SAP Note which explains about data type RAW ....

Data selection in info package using ABAP routine.

Hi,
when we are scheduling the info package(Infp package name is like XYZ),we want to load past 6 months data from the current date(INFO OBJECT(0CREATEDON) BETWEEN (Sy-Datum - 6 months TO Sy-Datum),in the selection tab in schedule i want to write the abap routine (type 6).please can any one have this type of code please sedn to me asap.
this is very urgent.delivery is tomorrow.

hi Lekha,
try following code.
seems you post the same question twice, one posting is sufficient. and please don't forget to reward helpful answers.
data: l_idx like sy-tabix.
read table l_t_range with key
iobjnm = '0CREATEDON'.
l_idx = sy-tabix.
DELETE l_t_range
WHERE iobjnm = '0CREATEDON'.
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-OPTION = 'EQ'.
if not work, try
L_t_RANGE-OPTION = 'BT'.
BT = between
last 6 month
L_t_RANGE-LOW = sy-datum - 180.
current date
L_t_RANGE-HIGH = sy-datum.
append l_t_range.
modify l_t_range index l_idx.
p_subrc = 0.
$$ end of routine - insert your code only before this line -
endform.

Routines for File name at External Data in Info Package level.

Hi All,
Can any one give the example codes of how to write the routine for Files at External Data in Info Package level.
Regards
srinivas

Hi Srinivas
Here iam attaching a sample code in the infopackage level this code is used to select the Current version from TVARV table ..based on the version from variable the data is loaded into the ods..
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'FISCPER'.
          l_idx = sy-tabix.
tables tvarv.
data: v_prever(6)   type c,
      v_fiscper(7) type n.
clear tvarv.
select single low
   from tvarv
   into v_prever
where name = 'ZBSK_PREVIOUS_RELEASED_VERSION' and
        type = 'P' and
        numb = '0000'.
concatenate v_prever(4) '0' v_prever+4(2) into v_fiscper.
   concatenate '0' v_prever+4(2) v_prever(4) into v_fiscper.
        l_t_range-low = v_fiscper .
          modify l_t_range index l_idx.
Hope the above code helps you..
let me know in case of any concerns.. and further help needed..
bye
Shu Moh..

How to set request number of info package using start routine

Hi All,
I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
Thanks
Sangita

You'll probably want to do this in a start routine. It is probably not advisable to hard-code the technical name of the InfoPak. They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
I would do a SQL select like this in a start routine, and then filter based on the results of the SQL. You'll probably want to sort the results by date and time, both descending. Or do a MAX in the SQL.
Please let me know if this isn't clear.
select q~rnr q~logdpid q~tdatum q~tuzeit
from rsreqdone as q
inner join rsldpio as p
on p~logdpid = q~logdpid
where p~objvers = 'A'
and p~logdpid like 'ZPAK%'
and p~source = 'your data source'

Example Code for Routine at Data Target in Info Package.

Hi,
Can any one send the example code for writing the routines at Data Target of Info Package for Deleting the Request from Info Cube after Update.
Thanks in Advance,
Regards,
srinivas

Hi All,
I want to know some examples for guidance in writing the Abap Routine at Data Target of Info Package for Deleting the Request from Info Cube after Update.
In the Data Targets of Info Package for Info Cubes we can delete the previous request based on the Conditions, exceptions and also based on the Abap Routine. I just want to know how do we write the Routine.
This option is adjacent to the Maintain to Data Target in Data Targets of Info Package and will available for Info cube only.
Thanks in Advance,
Regards,
srinivas

Data deletion routine in the info package

Hi All,
I am writting an data deletion routine in the info package.
it is working fine...
but when we are transporting the info package, that routine is not getting transported.
we have tried sending ths info package through a transport connection.
but still it is not taking the routine to next system.
please let me know if any one has a solution for this.
Thanks,
Mugdha

Hi Mughda,
Collect the infopackage using transport connection, While collecting the infopackage make sure that Routines are also collected in the same request.
Else most of systems will have authorizations to create infopackages, so try to create one IP and use the routine in IP.
Hope this helps.
Rgs,
I.R.K

Info Package in Process Chain - Performance Issue

Dear All,
We have some Info Package in Process Chain which when triggered initially turns red, then again yellow, after sometime red/green. These status keeps changing and finally results in green status. These infopackage takes 15-30 mins to complete.
And the info package error message shows "Processing time overdue". The chain runs daily and this issue also occurs on a daily basis.
Does anyone one of you have an idea of how to deal with this performance issue?
Regards.

Hi
As you said--
"initially time out time was set to 10 mins, so it was turning red at 10 mins. Later i changed it to 30 mins, then it is turning red at 30 mins, this info package takes maximum 20 mins to complete.
thatsy i asked whether there will be any problem if we remove this time out time."
I guess, its not mandatory to include the timeout value. Just try to execute the IP without entering the timeout value.
It should work.
Let me know if this helps.
Regards
SaiPrasad

Info package ABAP Routine to populate date from and To filed

Hello Experts,
I have requirement to populate the From and To dates with the: T-1 to T (Current Date u2013 1 to Current Run Date aka Sy-Datum) at info package level.I have written a code for this but see that From filed is not getting populated but TO filed is filled with current date.Can someone please tell me wats wrongwith my code?It is a delta info pacakage.
data: l_idx like sy-tabix.
read table l_t_range with key
     fieldname = 'CPUDT'.
l_idx = sy-tabix.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
l_t_range-low = sy-datum - 1.
l_t_range-High = sy-datum.
modify l_t_range index l_idx.
p_subrc = 0.
Thanks,

Was able to tackle this using the following code.
data: l_idx like sy-tabix.
data: V_date type sy-datum.
v_date = sy-datum - 1.
read table l_t_range with key
     fieldname = 'CPUDT'.
l_idx = sy-tabix.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
l_t_range-low = v_date.
   l_t_range-High = sy-datum.
modify l_t_range index l_idx.
p_subrc = 0.
Thanks,
I am closing this thread

Routine in Info Package, Debug in Info package.

Hi All,
Requirement is to include multiple ranges in Info Package based on the Conditions.
I want to check whether it is working fine by going into debug mode.
Can any help in this regards.
thanks in advance,
srinivas

Hello Sirnivas,
your programm contains a little error. You forgot the index!
You wrote...
read table l_t_range with key fieldname = 'ITM_CAT'.
l_t_range-sign = 'I'.
l_t_range-option = 'NE'.
l_t_range-Low = '2'.
clear l_t_range-high.
modify l_t_range index l_idx.
This will work better...
read table l_t_range with key fieldname = 'ITM_CAT'.
<b>l_idx = sy-tabix.</b>
l_t_range-sign = 'I'.
l_t_range-option = 'NE'.
l_t_range-Low = '2'.
clear l_t_range-high.
modify l_t_range index l_idx.
You can also add more selections by adding lines to l_t_range.
example:
data: l_idx like sy-tabix.
data: l_t_range2 like l_t_range.
          read table l_t_range with key
               fieldname = 'ITM_CAT'.
          l_idx = sy-tabix.
          l_t_range-sign = 'I'.
          l_t_range-option = 'NE'.
          l_t_range-Low = '2'.
          clear l_t_range-high.
          modify l_t_range index l_idx.
          move-corresponding l_t_range to l_t_range2.
          l_t_range2-sign = 'I'.
          l_t_range2-option = 'NE'.
          l_t_range2-Low = '3'.
          clear l_t_range2-high.
          append l_t_range2 to l_t_range.
I hope this helps you!
Regards
Message was edited by: Vazquez Dominik

Info package issue in Production system?

Hi experts,
I would like to know about the scenerio of info packages in production system.
1) When the objects are transported to production system,
Do we use the same info packages in the prod system,which are used to schedule the load in development system.
2) Do we create new infopackages everytime for the data load in production system?. Please let me know about this.
3) In my case when I schedule the infopackage which are transported to prod system are asking for request number. Is it normal?. I mean everytime we schedule, will it ask for request number in prod system.?
Please let me know the normal procedure as to how to load the data in prod system(Standard Procedure Which is followed by all developer's to load the data)
With regards,
Dubbu

1) When the objects are transported to production system,
Do we use the same info packages in the prod system,which are used to schedule the load in development system.
Ans : The choice is yours.In our system we create infopackages directly in production.Its just flexibility for us.
2) Do we create new infopackages everytime for the data load in production system?. Please let me know about this.
Ans : Infopackages are reusuable but if they are used in process chains its better to create new ones as it will affect the associated process chain.
3) In my case when I schedule the infopackage which are transported to prod system are asking for request number. Is it normal?. I mean everytime we schedule, will it ask for request number in prod system.?
Ans : Yes its normal to ask request number but in development system.

Info Package Routine issue.

Similar Messages

Maybe you are looking for